Amirkabir Journal of Mechanical Engineering

Main Subjects = Elastic and Inelastic Stress Analysis

Modeling and Analysis the Bending Behavior of Soft Pneumatic Network Actuator with Hyperelastic Models

Volume 55, Issue 8, November 2023, Pages 1021-1042

10.22060/mej.2023.22104.7567

masoud Ajri; sina Esmalipour

Developing an Analytical Model for Viscoelastic Anisotropic Dielectric Elastomer and Investigating the Rate Dependent Electromechanical Behavior

Volume 54, Issue 12, March 2023, Pages 2781-2800

10.22060/mej.2023.21565.7468

Marzie Majidi; Masood Asgari

Investigation of the Effect of Porosity on Thermo-Elastoplastic Bending of Functionally Graded Plates Using 3D Meshless Radial Basis Reproducing Kernel Particle Method

Volume 54, Issue 10, January 2023, Pages 2377-2398

10.22060/mej.2022.20998.7356

Reza Vaghefi

Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis

Volume 54, Issue 8, November 2022, Pages 1867-1894

10.22060/mej.2022.20983.7353

Hassan Sayar; Ramin Molahamzezadeh; Mohammad Hossein Korani; Mohammad Azadi

Mixed Finite Element Formulation for 2D Problems Analysis Based on Analytical Solutions of Deferential Equation

Volume 54, Issue 6, September 2022, Pages 1443-1458

10.22060/mej.2022.20650.7287

Mohammad Karkon; Majid Yaghoobi

Experimental Study of Effects of Hydrogen Embrittlement and Residual Stress on Mechanical Properties of GTD450

Volume 53, Issue 12, March 2022, Pages 5659-5678

10.22060/mej.2021.19459.7032

sepide nosrati; Esmaeil Poursaeidi; َAmin Dadashi

Crystal Plasticity Finite Element Study of Necking Behavior of Aluminum Alloy Sheet Subject to Thickness-Stress

Volume 53, Issue 12, March 2022, Pages 5755-5768

10.22060/mej.2021.19957.7146

Mohammadreza Kargar Daroonkolaee; Seyed Hadi Ghaderi

Piezoelectric Energy Harvesting Using a Porous Beam Under Fluid-Induced Vibrations

Volume 53, Issue 8, November 2021, Pages 4633-4648

10.22060/mej.2021.18200.6780

Mohsen Fallah; vahid Arab Maleki

Reliability analysis of rectangular plate under in-plane tensile loading using continuum damage mechanics theory

Volume 53, Issue 6, September 2021, Pages 3645-3656

10.22060/mej.2020.18375.6804

Peyman Gholami; Mohammad Ali Farsi

Comparison of penetration process of 2-layer elastomeric composite with thermoset composite using energy absorption equations

Volume 53, Issue 6, September 2021, Pages 3657-3672

10.22060/mej.2020.18500.6829

Seyedeh Samaneh Asemani; gholamhossain Liaghat; Hamed Ahmadi; Yavar Anani; Amin Khodadadi

Fabrication and testing of re-entrant auxetic samples and sensor: Numerically and experimentally

Volume 53, Issue 6 (Special Issue), September 2021, Pages 3987-4008

10.22060/mej.2021.19043.6940

bahman taherkhani; ali pourkamali anaraki; javad kadkhodapour

Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading

Volume 53, Issue 6 (Special Issue), September 2021, Pages 4023-4050

10.22060/mej.2021.19334.7001

Mojtaba Ziya-Shamami; Hashem Babaei; Tohid Mirzababaie Mostofi; Hossein Khodarahmi

Analytical modeling of elastic limit angular velocity in a rotating disk of a functionally graded material under mechanical-thermal loading conditions

Volume 53, Issue 4 (Special Issue), July 2021, Pages 2589-2612

10.22060/mej.2020.17969.6699

sanaz jafari

Fractional calculus approach for bending of viscoelastic plate using two-variable refined plate theory

Volume 53, Issue 4, July 2021, Pages 2287-2308

10.22060/mej.2020.17695.6649

Elahe Nayebi; Seyed Jafar Rouzegar; Mohammad Hosein Heydari

Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method

Volume 53, Issue 4, July 2021, Pages 2331-2346

10.22060/mej.2020.17909.6687

Shahram Hosseini; Gholam Hosein Rahimi; Yavar Anani

Investigation of the effect of welding path on residual stresses and deformations in peripheral welding of steel pipe

Volume 53, Issue 4 (Special Issue), July 2021, Pages 2735-2750

10.22060/mej.2020.18166.6752

Mahdi Kazemi

Study of the Analytical Solutions and Modelling of Nonlinear Buckling in Bellows

Volume 53, Issue 2, May 2021, Pages 729-744

10.22060/mej.2019.16539.6394

mohammadhasan hajbagheri; Amir reza Shahani

2-Dimensional Electroelastic Analysis of Piezoelectric Cylinders Using First-Order Shear Deformation and First-Order Electric Potential Theories

Volume 53, Issue 2, May 2021, Pages 815-832

10.22060/mej.2019.16689.6421

Mohammad Parhizkar Yaghoobi; Mahdi Ghannad

Finite element modeling of shape memory alloy stent insertion in the vessel with consideration of vessel damage

Volume 53, Issue 2 (Special Issue), May 2021, Pages 1211-1222

10.22060/mej.2019.16697.6423

Fatemeh Rouhani; Mohammad Reza Zakerzadeh; Mostafa Baghani

Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model

Volume 52, Issue 12, March 2021, Pages 3549-3566

10.22060/mej.2019.15643.6175

Saeed Javadi; Abdolrahman Jaamialahmadi; Ali Reza Danesh Mehr; Mohaddeseh Azadvari; Saeid Nekoonam

Mechanical Behavior of Temperature-Sensitive Hydrogel Considering Functionally Graded Characteristics

Volume 52, Issue 12, March 2021, Pages 3583-3594

10.22060/mej.2019.16172.6294

Mohammad Shojaeifard; Mostafa Baghani

A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area

Volume 52, Issue 11, February 2021, Pages 3275-3288

10.22060/mej.2019.15698.6180

Mohammad Mahdi Barzegari; Mostafa Habibnia; Mohammad Momenifar; Mojtaba Ghadimi; Kamal Mohammadi

Experimental Determination of the Modified Drucker-Prager Cap Constitutive Model for 92 Percent Alumina Powder

Volume 52, Issue 10, January 2021, Pages 2725-2740

10.22060/mej.2019.16354.6340

Sohrab Salamati-Khiavi; Seyed Hadi Ghaderi; Seyed Vahid Hosseini

Multi-Objective Optimization of Laser Peening Process Parameters Using Taguchi Orthogonal Array and Gray Relational Analysis

Volume 52, Issue 10, January 2021, Pages 2917-2930

10.22060/mej.2019.16071.6305

rasool bikdeloo; ali kiani; Hadi Salavati

Developing a CDM Based Model for Creep-Fatigue Life Assessment of a Gas Turbine Blade

Volume 52, Issue 10, January 2021, Pages 2951-2966

10.22060/mej.2019.15921.6229

Bijan Mohammadi; Seyyed Ali Hashemitabar

Amirkabir Journal of Mechanical Engineering

Journal Archive

Volume 55 (2023-2024)

Volume 54 (2022-2023)

Volume 53 (2021-2022)

Volume 52 (2020-2021)

Volume 51 (2019-2020)

Volume 50 (2018)

Volume 49 (2017)

Volume 48 (2016)

Volume 47 (2015)

Volume 46 (2014)

Volume 45 (2013)

Volume 44 (2012)

Volume 43 (2011)

Volume 42 (2010)

Volume 41 (2009)