@article { author = {Shahi-Ashtiani, M. A. and Alipour, A.}, title = {An Axiomatic Design Approach to Reduce Repetition in Tail Conceptual Design Process}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {3-14}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2017.11668.5151}, abstract = {ABSTRACT: From the perspective of synthesis, system design is comprised of conceptual, preliminary,and detailed design. Conceptual design is the first and most important phase of the system design that could influence the quality of the product. In general, conceptual design is iterative processes that tries to satisfy identified requirements. The outcome of the conceptual design phase is one or more concepts which does not necessarily accompany any detail. If the selected configuration could not satisfy the requirements, the designer should make changes in the decisions or may change the selected configuration completely. This activity makes the conceptual design process longer and increases the cost of the design process,as well. In addition, in the last decade, product design experienced fundamental changes in its concept from focusing on performance, function, and durability to sustainable design criteria such as being environmentally friendly, considering global warming, reducing energy consumption, and conducting end-of-product life cycle management such as reusing, recycling and remanufacturing. These conductthe designer to try to improve conceptual design process with the adoption of new methodologies. This article intends to use axiomatic design methodology for an innovative design, reduce repetition and satisfies most of the requirements in the conceptual design process.}, keywords = {Conceptual design,Iterative process,Customer needs,Axiomatic design,Quality function deployment}, title_fa = {استفاده از روش طراحی اصل محور به منظور کاهش تکرارپذیری در فرایند طراحی مفهومی یک سامانه پیچیده}, abstract_fa = {چکیده: فرآیند طراحی یک سامانه پیچیده دربردارنده سه بخش طراحی مفهومی، طراحی اولیه و طراحی جزئیات می باشد که نخستین و مهمترین آن فرایند طراحی مفهومی است. در سا لهای گذشته معیارهایی همچون سازگاری با محیط زیست، کاهش سوخت مصوفی و زمان طراحی، طراحی خانوادگی، بازیاف تپذیری و غیره به معیارهای سنتی طراحی همچون ماندگاری، قابلیت اطمینان، عملکرد و زیبایی افزوده شد هاست که سبب افزایش همگیرایی بین نیازمند یهای یک محصول و پیچیده شدن فرآیند طراحی مفهومی آن شده است. بنابراینطراحان نیازمند بکارگیری رو شهای نوین برای طراحی سامان ههای پیچیده هستند که ضمن اجابت همزمان نیازهای نوین و سنتی، توانایی کاهش تکرار پذیری و پیچیدگی در فرآیند طراحی محصول را نیز داشته باشد. هدف از این تحقیق، بهر هگیری از روش طراحی اصل محور در فرآیند طراحی مفهومی دم یک هواپیما است تا میزان کارایی این روش در انتخاب پیکربندی مناسب، کاهش میزان تکرار و اجابت متوازن نیازمند یهای دم هواپیما را مورد ارزیابی قرار دهد. در همین راستا برای تبدیل نیازمندی مشتری به شاخ صهای طراحی، از روش ارتقا تابع کیفیت نیز بهره گرفته شد هاست. نتایج این تحقیق نشا ندهنده این است که ترکیب روش ارتقاء تابع کیفیت و طراحی اصل محور تأثیر به سزایی بر افزایش خلاقیت، کاهش تکرا رپذیری، شناسایی مناسب نیازهای مشتری و در نهایت انتخاب مناسب طرح دارد.}, keywords_fa = {طراحی مفهومی,تکرار در فرایند طراحی,نیازهای مشتری,طراحی اصل محور,روش ارتقاء تابع کیفیت}, url = {https://mej.aut.ac.ir/article_947.html}, eprint = {https://mej.aut.ac.ir/article_947_16b043a27c89d5ca92fa5b365c3aa8fe.pdf} } @article { author = {Razavi, S. and Shooshtari, A.}, title = {On the Free Vibration Analysis of a CNT-Reinforced Plate Bonded to a Magnetoelectroelastic Layer}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {15-24}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.11818.5191}, abstract = {ABSTRACT: In this study, free vibration of a two-layered smart rectangular plate composed of a singlewalled carbon nanotube-reinforced layer and a magnetoelectroelastic layer are investigated. Carbon nanotubes are distributed uniformly along the thickness of the composite layer. The temperature of the environment changes uniformly. The plate is simply-supported and subjected to electric and magnetic loadings. First-order shear deformation theory is used to determine the equations of motion of the plate, and Gauss’s laws for electrostatics and magnetostatics are used to model the magnetoelectric behavior of the plate. By defining the generalized displacements of the plate in double Fourier series form and then by using orthogonality principle of trigonometric functions, the partial differential equations of motion are transformed into a set of algebraic equations in terms of the natural frequency of the plate. Therefore, an analytical relation is obtained for the fundamental natural frequency. After validation of the proposedmodel, some examples are presented to investigate the effects of several parameters on the free vibration response of this smart plate.}, keywords = {free vibration,Rectangular plate,Carbon nanotube-reinforced composite,Magnetoelectroelastic layer}, title_fa = {بررسی ارتعاش آزاد ورق کامپوزیتی تقویت شده با نانو لوله‌‌های کربنی به همراه لایه مگنتوالکتروالاستیک}, abstract_fa = {چکیده: در این تحقیق، ارتعاش آزاد ورق مستطیلی هوشمند دولایه‌ای متشکل از یک لایه کامپوزیتی تقویت شده با نانولوله‌های کربنی تک جداره و یک لایه هوشمند چندفازی مگنتوالکتروالاستیک بررسی شده است. نانولوله‌های کربن به صورت یکنواخت در راستای ضخامت لایه کامپوزیتی توزیع شده‌اند. دمای محیط به صورت یکنواخت تغییر می‌کند. ورق بر روی تکیه گاه ساده قرار گرفته شده و تحت بارگذاری‌های الکتریکی و مغناطیسی می‌باشد. از نظریۀ برشی مرتبه اول ورق‌ها برای تعیین معادلات حرکت ورق استفاده شده و از قوانین گاوس برای حالت‌های الکترواستاتیک و مگنتواستاتیک برای مدل سازی رفتار مگنتوالکتریک استفاده شده است. با بیان متغیرهای تعمیم یافته ورق به صورت سری فوریه دوگانه و استفاده از روابط تعامد توابع مثلثاتی، معادلات دیفرانسیل جزئی به دستگاه معادله جبری برحسب بسامد طبیعی ورق تبدیل گردیده‌اند و رابطه‌ای تحلیلی برای بسامد طبیعی اصلی ورق به دست آمده است. پس از صحه‌گذاری مدل پیشنهادی، مثال‌هایی برای بررسی اثرات پارامترهای مختلف بر روی پاسخ ارتعاش آزاد این ورق هوشمند ارائه شده‌‎اند.}, keywords_fa = {ارتعاش آزاد,ورق مستطیلی,کامپوزیت تقویت شده با نانو لوله‌ کربنی,لایه مگنتوالکتروالاستیک}, url = {https://mej.aut.ac.ir/article_883.html}, eprint = {https://mej.aut.ac.ir/article_883_06e184354a4fbe51dd042a0e4be3b1f8.pdf} } @article { author = {Moharrami, R. and Daroudi, A. and Taghilu, M. J.}, title = {Measurement of Strain by Digital Shearography with a New Algorithm of Phase Calculation}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {25-32}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.739}, abstract = {ABSTRACT: In this paper, digital shearography method has been used to measure the in-plane strain. Oneintensity is being recorded before loading and four intensities have been gotten after loading with the phase shiftingmethod. With the subtraction of first intensity from the four intensities of after loading, four new intensities beingcalculated which from them the needed phase calculated and with use of this phase in the strain formula, the straincan be calculate. For this work, the modified Michelson system as a shearing tool is used. Testing specimen wasan aluminum plate with the dimension of 35×35×1mm which is clamped in the boundary and has been loaded inthe center. For the loading, a fixture has been made which has the ability of 3-micron displacement creation. Forillumination on the specimen from two mutual and same directions, two diode lasers with the wavelength of 630 nmare used as the optical source. Taking into account that in the experimental measurement the conditions are real butare ideal in the numerical analysis, behavior of two graph of experimental measurement and numerical analysis isapproximately the same. In the part of error analysis, the amount of relative error is approximately 18% determined.}, keywords = {Strain measurement,Speckle interferometry,Digital shearography,Phase shifting technique}, title_fa = {اندازه گیری کرنش با روش تداخل سنجی چینشی دیجیتالی و با الگوریتم جدید محاسبه فاز}, abstract_fa = {چکیده: در این مقاله از روش تداخل سنجی لک‌وپیسی چینشی دیجیتالی برای محاسبه کرنش استفاده شده است. یک تصویر قبل از بارگذاری و چهار تصویر بعد از بارگذاری به روش تغییر فاز، ثبت شده است. با کم کردن شدت اولیه از چهار شدت بعد از بارگذاری، چهار شدت جدید بدست می‌آید که از روی آنها فاز محاسبه و کرنش از روی فاز بدست می‌آید. برای انجام این کار از سیستم اصلاح شده مایکلسون به عنوان ابزار چینش استفاده شده است. قطعه مورد آزمایش یک صفحه آلومینیومی با ابعاد 1×35×35 میلیمتر می‌باشد که از چهار طرف گیردار بوده و در مرکز صفحه تحت جابجایی نقطه‌ای قرار دارد. برای اعمال جابجایی، فیکسچری ساخته شد که توانایی اعمال جابجایی‌های بیشتر از 3 میکرون را داشت. از دو لیزر دیودی با طول موج 630 نانومتر به عنوان منبع نور برای تابش روی قطعه از دو زاویه‌ی یکسان و متقابل استفاده شد. با توجه به اینکه در اندازه‌گیری تجربی شرایط واقعی بوده ولی در تحلیل عددی شرایط ایده‌آلی در نظر گرفته شده، رفتار دو نمودار حاصل از اندازه‌گیری تجربی و تحلیل عددی تقریبا یکسان می‌باشد، در بخش تحلیل خطا، خطای نسبی ناشی از عوامل تاثیرگذار در انداز‌ه‌گیری تجربی محاسبه شده و حدود 18 درصد حاصل گردیده است.}, keywords_fa = {اندازه‌گیری کرنش,تداخل سنجی لک‌وپیسی,تداخل‌سنجی چینشی دیجیتالی,تکنیک تغییر فاز}, url = {https://mej.aut.ac.ir/article_739.html}, eprint = {https://mej.aut.ac.ir/article_739_d076bec81d3f3889fb368c43ecd7475d.pdf} } @article { author = {Torabi, K. and Afshari, H.}, title = {Thermo-Mechanical Stress Analysis in a Rotating Radially Graded FG-Disc with Non-Uniform Thickness}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {33-46}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.772}, abstract = {In this paper, according to one-dimensional heat transfer rules and two-dimensional elasticity theory, the set of governing equation on temperature and thermo-mechanical stresses in a rotating radially graded FG-disc with non-uniform thickness are derived. All mechanical and thermal properties of the material including elastic modulus, Poisson’s ratio, density and thermal conductivity and expansion coefficients are considered to be graded radially according to a power law function; The volume fraction changes in radial direction between two desired values. In thermal analysis, convention heat transfer through two sides of the disc are considered and thermal boundary conditions are considered as constant temperature at inner edge and convention heat transfer at outer one. In order to increase the accuracy of analysis, variation of convective heat transfer coefficient in radial direction and its dependency on the rotating speed are considered. Considering complexity in equations, differential quadrature method (DQM) is used as strong approach and both thermal and mechanical equations are solved numerically. Effect of various parameters such as rotating speed, variation of thickness and power law index on the distribution of temperature, stress and deflection of the disc are investigated. Also, based on the Tamura-Tomota-Ozawa model (TTO), yield strength of the disc is derived and its elastic and plastic parts are detected.}, keywords = {Thermo-mechanical analysis,Rotating disc,Functionally graded materials,Tamura-Tomota-Ozawa model,Differential quadrature method}, title_fa = {تحلیل تنش‌های مکانیکی-حرارتی در دیسک‌های دوار با ضخامت و خواص متغیر در راستای شعاعی}, abstract_fa = {چکیده: در این پژوهش ابتدا معادلات حاکم بر توزیع دما و تحلیل تنش‌های مکانیکی و حرارتی در یک دیسک دوار با ضخامت و خواص متغیر در راستای شعاعی استخراج می‌شوند. تمامی خواص مکانیکی و حرارتی ماده بر اساس یک تابع توانی تغییر می‌کنند بطوریکه که کسر حجمی ماده در راستای شعاعی بین دو مقدار دلخواه تغییر می‌کند. در استخراج معادلات حرارت، انتقال حرارت همرفتی از طریق سطوح دو طرف دیسک نیز در نظر گرفته می‌شوند و شرایط مرزی حرارتی دیسک به شکل شرایط دما ثابت در لبه‌ی داخلی و انتقال حرارت همرفتی در لبه‌ی خارجی دیسک در نظر گرفته می‌شود. تغییرات ضریب انتقال حرارت همرفتی در راستای شعاعی و وابستگی آن به سرعت زاوی‌های دیسک نیز در نظر گرفته شده‌اند. با توجه به پیچیدگی‌های موجود در معادلات، از روش تفاضلات مربعی برای حل تمامی معادلات استفاده شده و توزیع دما و مولفه‌های تنش و جابجایی در دیسک بدست خواهند آمد. در نهایت تاثیر چگونگی تغییرات ضخامت و خواص ماده در راستای شعاعی بر روی توزیع دما، تنش و جابجایی در دیسک بررسی می‌گردد. در نهایت با استفاده از مدل تامورا-توموتا-اوزاوا و از طریق مقایسه‌ی تنش‌ها با مقادیر مجاز بدست آمده، تسلیم یا عدم تسلیم در نقاط مختلف دیسک بررسی می‌گردد.}, keywords_fa = {تحلیل مکانیکی-حرارتی,دیسک دوار,مواد مدرج تابعی,مدل تامورا-توموتا-اوزاوا,روش تفاضلات مربعی}, url = {https://mej.aut.ac.ir/article_772.html}, eprint = {https://mej.aut.ac.ir/article_772_6a548b078d5a8f66ec35e8f4e0bdf4a7.pdf} } @article { author = {Kavousi Sisi, M. and Shakeri, M. and Sadighi, M.}, title = {Dynamic Analysis of Asynchronous Low-Velocity Impacts on Laminated Composite Plate}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {47-62}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2017.11773.5180}, abstract = {ABSTRACT: Studying asynchronous low-velocity impacts on the structure is one of the applicable problems in this field. In this research, the dynamic analysis of asynchronous low-velocity impacts with arbitrary times and locations on the orthotropic laminated composite plates has been investigated. The dynamic equations of motion are obtained using Hamilton’s principle with the assumptions of small deformations and the Hertzian contact law is used for modeling the contact between target and impactors. Then, the closed form solution of the governing equations is obtained using double Fourier expansion of displacement and loading fields. The accuracy of the results has been checked by comparing them to those in the literature in conjunction with the example considering the convergence of the results. Several numerical examples showed that the times and locations of the impacts play an important roleon the superposition of induced waves which affect maximum contact forces, minimum and maximum of the plate transverse displacements, as well as the plate, absorbed energy. Modeling asynchronous low-velocity impacts of drop test could be mentioned as one of the significant results of this study. This modeling can substitute for experimental tests and decrease the costs.}, keywords = {Laminated composite plates,Asynchronous low-velocity impacts,Arbitrary locations,Hamilton’s principle}, title_fa = {تحلیل دینامیکی ضربه‌های غیرهم‌زمان سرعت پایین روی ورق چندلایه کامپوزیتی}, abstract_fa = {یکی از مسائل کاربردی در پدیده برخورد، بررسی ضربه‌های غیر هم‌زمان به سازه است. در این پژوهش، تحلیل دینامیکی ضربه‌های سرعت پایین در زمان‌ها و محل‌های دلخواه روی ورق‌های چندلایه کامپوزیتی ارتوتروپ صورت گرفته است. ابتدا معادلات دینامیکی ورق با استفاده از اصل همیلتون و با فرض تئوری کلاسیک و تغییر شکل‌های کوچک و در نظر گرفتن قانون تماس هرتز در مدلسازی برخورد ضربه‌زننده با هدف بدست آمده است. در ادامه، حل دقیق مسئله با بسط میدان جابجایی و بارگذاری به صورت توابع فوریه دوبعدی ارائه شده است. صحت‌سنجی نتایج بدست آمده در قیاس با مقالات به همراه تحلیل همگرایی پاسخ دینامیکی، نشان‌دهنده اعتبار آن‌هاست. نتایج بدست آمده حاکی از آن است که زمان و محل ضربه‌ها نقش موثری در برهم نهی امواج ایجاد شده و در نتیجه مقدار حداکثر نیروی تماس، کمینه و بیشینه جابجایی عرضی ایجاد شده در سازه و همچنین مقدار انرژی جذب شده توسط آن را دارد. مدلسازی ضربه‌های غیرهم‌زمان سرعت پایین در آزمایش سقوط آزاد، یکی دیگر از نتایج قابل توجه بدست آمده در این پژوهش است که می‌تواند جایگزین آزمایش‌های متعدد شده و هزینه‌های آزمایش را کاهش دهد.}, keywords_fa = {ورق چندلایه کامپوزیتی,ضربه‌های غیرهم‌زمان سرعت پایین,مکان‌های دلخواه,اصل همیلتون}, url = {https://mej.aut.ac.ir/article_895.html}, eprint = {https://mej.aut.ac.ir/article_895_247f52ffec39ef5a285ada6dcfbf92b5.pdf} } @article { author = {Fazilati, J.}, title = {Dynamic Behavior Analysis of Moderately Thick Composite Laminated Plates Containing Square Delamination Using Spline-Finite Strip Method}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {63-72}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.792}, abstract = {ABSTRACT: The dynamic behavior of laminated composite panels subjected to in-plane endloads is investigated using finite strip method. The panel is assumed to contain square delamination. Friction and contact conditions at delaminated interfaces are not considered. It is also assumed that the delamination exists before loading and delamination growth is not considered. A general loading consisted of time varying as well as constant component is assumed and the static buckling, natural frequencies and also parametric instability of the panel have been investigated. The loading assumed to be uniformly distributed throughout the panel area. The dynamic behavior of the delaminated panel has been extracted by using an enhanced B-spline finite strip formulation on the basis of the principle of virtual work. A third order Reddy type shear deformation theory is utilized in order to bring the effectsof moderately thick laminate into account. The effects of loading as well as boundary conditions on the dynamic behavior of the structure are studied. The dynamic instability regions are extracted using the Bolotin’s first order approximation. In order to demonstrate the capabilities of the developed method in predicting the structural dynamic behavior, some representing results are obtained and compared with those available in the literature.}, keywords = {Dynamic behavior,composite panel,Shear deformation theory,Finite strip method,delamination}, title_fa = {تحلیل رفتار دینامیکی صفحات کامپوزیتی نسبتا ضخیم دارای جدایی لایه ای مربعی با استفاده از روش نوار محدود اسپلاین}, abstract_fa = {چکیده: رفتار دینامیکی پنل ساخته شده از مواد مرکب لایه‌ای مواجه با تحریک مکانیکی هارمونیک داخل صفحه با استفاده از روش نوار محدود مورد بررسی قرار گرفته است. به صورت پیش فرض، یک محدوده جدایی لایه‌ای مربعی پیش از تحریک در ساختار پنل وجود دارد. رشد ترک جدایی در مسأله مد نظر نبوده است و با توجه به خطی بودن مسأله، اثرات اصطکاک و تماس بین دو سطح جدایی لحاظ نشده است. تحریک مکانیکی داخل صفحه در راستای طولی و در حالت کلی شامل مؤلفه‌های ثابت و متغیر با زمان در نظر گرفته و مسأله کمانش استاتیک، بسامدهای طبیعی و نیز ناپایداری پارامتری مدل بررسی شده است. تحریک مکانیکی به صورت تنش در کل سطح مدل توزیع شده و رفتار دینامیکی  مدل با استفاده از فرمولاسیون توسعه یافته نوار محدود اسپلاین بر پایه اصل کار مجازی و با استفاده از نظریه مرتبه سوم برش عرضی به روش تقریب مرتبه اول بولوتین استخراج می‌شود. با هدف ارائه قابلیت فرمولاسیون توسعه یافته در پی شبینی مشخصات رفتاری سازه، برخی مسائل موجود در منابع حل، مقایسه و سپس برخی مسائل جدید ارائه شده است. اثرات تغییر بارگذاری، لایه‌چینی و قیود مرزی بر مشخصات پایداری مدل مورد بررسی قرار گرفته است.}, keywords_fa = {رفتار دینامیکی,مواد مرکب لایه‌ای,نظریه مرتبه بالای برش عرضی,روش نوار محدود,جدایی لایه‌ای}, url = {https://mej.aut.ac.ir/article_792.html}, eprint = {https://mej.aut.ac.ir/article_792_da655f8300fb8813b8827f9b03b716d3.pdf} } @article { author = {Ebrahimi, F. and Habibi, S.}, title = {Nonlinear Dynamic Response Analysis of Carbon Fiber Reinforced Polymer Enhanced with Carbon Nanotubes on Elastic Foundations in Thermal Environments}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {73-90}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.774}, abstract = {plates enhanced with carbon nanotubes resting on elastic foundations in thermal environments using the finite element method is investigated. The effective material properties of the multiscale composite are calculated using Halpin–Tsai equations and fiber micromechanics in the hierarchy. Three types of distribution of temperature through the thickness of the plate namely, uniform, linear, and nonlinear are considered. The governing equations are derived based on Inverse Hyperbolic Shear Deformation Theory and von Kármán geometrical nonlinearity. Five types of impulsive loads namely the step, sudden,triangular, half-sine, and exponential pulses are considered. Numerical results reveal that the deflections of multi-phase composites significantly decrease with a small percentage of carbon nanotubes. Also, it is found that in thermal  nvironment, central deflection of the plate was reduced using a maximum of 1% of the carbon nanotube in polymer composites and adding higher weight percentage showed no significant change in the peaks of central deflection.}, keywords = {Nonlinear dynamic response,Carbon nanotubes,Thermal environments,Hyperbolic shear deformation theory}, title_fa = {تحلیل غیرخطی پاسخ دینامیکی ورق کامپوزیتی فیبرکربنی بهبودیافته با نانولوله کربنی بر بستر الاستیک در محیط حرارتی}, abstract_fa = {چکیده: در این مقاله، پاسخ دینامیکی غیرخطی ورق کامپوزیتی چندلایه تقویت شده با فیبر کربن و نانولوله‌های کربنی تحت بارگذاری مختلف مکانیکی و گرادیان حرارتی بر روی بستر الاستیک وینکلر-پسترناک مورد مطالعه قرار گرفته است. معادلات حاکم براساس نظریه برشی هایپربولیک معکوس و روابط غیرخطی کرنش ون کارمن استخراج شده و با استفاده از اجزا محدود حل می‌شود. نانولوله‌های کربن به صورت تصادفی و نامنظم در ماتریس پخش شده‌اند و خواص کامپوزیت سه فازی با ترکیبی از معادلات هالپین تسای و مدل میکرومکانیکی به صورت سلسله مراتبی به دست آمده است. تغییرات دما در راستای ضخامت ورق، یکنواخت، خطی و غیرخطی و چهار نوع بار ضرب های شامل نیم سینوسی، مثلثی، توانی ، پله‌ای و یکنواخت در نظر گرفته شده است. نتایج عددی نشان می‌دهد با افزودن نانولوله به کامپوزیت میزان خیز مرکز ورق کاهش پیدا می کند. کاهش خیز برای نانولوله‌های چند جداره مقدار کمتری نسبت به نانولوله‌های تک جداره دارد. همچنین مشاهده می‌شود که در محیط حرارتی افزایش تا % 1 وزنی نانولوله می‌تواند خیز مرکز ورق را کاهش دهد و پس از آن افزایش نانولوله تغییر قابل مشاهده‌ای برای خیز ورق دربرندارد.}, keywords_fa = {پاسخ دینامیکی غیرخطی,نانولوله کربنی,محیط حرارتی,نانوکامپوزیت چند فازی,نظریه برشی هایپربولیک}, url = {https://mej.aut.ac.ir/article_774.html}, eprint = {https://mej.aut.ac.ir/article_774_74ee34e43e7a71fa83818e03c4b574e1.pdf} } @article { author = {Moradi, B. and Asgari, M.}, title = {Brain Trauma in Vehicle Side Crash; Developing a Computational Model for Diffuse Axonal and Subdural Hematoma Injuries}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {91-102}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2017.11803.5187}, abstract = {ABSTRACT: Based on complicated modelling problems of head trauma, a finite element model of the human head has been developed in order to evaluate different types of brain damage. 233 sections Magnetic Resonance Images of the head of a 42 years old man were prepared. The geometric models of Skull, Meninges and brain were extracted. Mechanical properties related to tissues of the skull, meninges and brain membrane are applied. Obtained results from simulation correlated well with experimental results. After ensuring the validity of the model, data acceleration in the head recording from side impact test was applied to the model. The simulation results showed that the rotational acceleration, due to high strain rate in the brain and increased pressure in meninges, is responsible for rupturing arteries and veins. However, linear acceleration alone does not lead to severe damages in the brain. Developing a new computational model for these injuries evaluation including side crash case, have not been considered in previous studies. So, considering this problem in addition to developing an accurate and efficient FEM head model could be supposing the considerable innovation of this study.}, keywords = {Brain Injury,Biomechanics,Side Crash,FEM Head Model}, title_fa = {بررسی آسیب‌های مغزی سرنشین خودرو در تصادف از کنار و ارائه مدل محاسباتی برای شاخص‌‎های آسیب دیفیوزآکسونال و غده‌ای زیردورال}, abstract_fa = {چکیده: با توجه به دشواری انجام آزمون‌های واقعی و اهمیت مدل‌سازی دقیق آسیب‌های مغزی در این پژوهش مدل اجزا محدود سر انسان به منظور بررسی انواع مختلف آسیب‌های مغزی توسعه داده شده است. با استفاده از 233 مقطع تصویربرداری تشدید مغناطیسی از سر یک فرد 42 ساله و پردازش تصویر مدل هندسی بافت‌های استخوان جمجمه، پرده مننژ و مغز استخراج و ویرایش شده اند. خواص مکانیکی مربوط به هر یک ازبافت‌ها با استفاده از مدل‌های ساختاری مناسب غیرخطی استخراج شده و اعتبارسنجی با استفاده از داده‌های آزمایشگاهی موجود انجام شده است. با توجه به اثرات بسیار شدید ناشی از تصادف از کنار و آسیب‌پذیری بیشتر سرنشین در این موارد داده‌های شتاب در ناحیه سر در یک آزمایش تصادف از کنار در  یک مدل‌سازی تصادف به دست آمده و به مدل اجزا محدود اعمال شده است. معیارهای آسیب مربوطه بر اساس داده‌های حاصل از شبیه‌سازی استخراج شده که نشان می‌دهند شتاب دورانی وارد شده به سر با دلیل افزایش فشار در پرده مننژ و ایجاد کرنش زیاد در بافت مغز موجب پارگی سرخرگ‌ها و سیاهرگ‌های مغزی شده و بیشترین سهم را در شدت آسیب‌های مغزی دارد. درحالیکه شتاب خطی به تنهایی منجر به آسیب‌های شدیدی در مغز نمی‌شود.}, keywords_fa = {بیومکانیک,آسیب مغز,تصادف از کنار,مدل اجزا محدود سر}, url = {https://mej.aut.ac.ir/article_898.html}, eprint = {https://mej.aut.ac.ir/article_898_c4695e430b74a469f91f52c69d4d5877.pdf} } @article { author = {Bannazadeh, R. and Riahi, M. and Aieneravaie, M.}, title = {Failure Analysis of a Gas Turbine Blade Made of Inconel 738LC Super Alloy}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {103-112}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.773}, abstract = {and critical components of a gas turbine. Blade failures in gas turbine engines often lead to loss of all downstream stages and the power plant will shut down, which can lead to prolonged outages and severe economic loss. In this paper, the failure of a GE-F5 gas turbine blade has been studied by metallurgical and mechanical examinations. The blade was made of a nickel base alloy Inconel 738LC. This blade has fractured after about 65,000 hours of service in one of the Iran’s power plants during operation. Due to the blade failure, the turbine engine was damaged severely. The study was started with a thoroughvisual inspection of bl ades and continued with hardness measurement, chemical composition checks,and microstructural evaluation as well as examination of the fracture surface. The investigations showed that serious pitting was occurred on the blade surface and there were evidences of fatigue marks in the fracture surface. It was found that the crack initiated by the hot corrosion from the leading edge and propagated by fatigue and finally, as a result of the reduction in cross-section area, fracture was completed.}, keywords = {Inconel 738LC,Metallography,Failure of Blade,Fatigue,Gas turbine}, title_fa = {بررسی علل شکست یک پره توربین گازی از جنس سوپر آلیاژ اینکونل 738LC}, abstract_fa = {چکیده: توربین‌های گازی نقش بسیار مهمی را در نیروگاه‌های کشور به منظور تولید برق بر عهده دارند و پره‌ها از حساس‌ترین قطعات در توربین‌های گازی به شمار می‌روند. خرابی پره‌ها در یک توربین گاز منجر به وارد آمدن خسارت به ردیف‌های بعدی توربین و خاموشی نیروگاه خواهد شد، که می‌تواند هزینه‌های زیادی را در پی داشته باشد. در مقاله حاضر علل شکست یک پره توربین گازی GE-F5 با انجام آزمایشات مکانیکی و متالورژیکی مورد بررسی قرار گرفته است. پره موردنظر سوپر آلیاژ پایه نیکل اینکونل LC738 بوده است که پس از حدود 65000 ساعت سرویس در حین کارکرد دچار حادثه شده است. در اثر این حادثه، قسمت‌های متعددی از توربین دچار آسیب-های شدید شدند. بازرسی چشمی، اندازه‌گیری سختی، آنالیز ترکیب شیمیایی، بررسی ریزساختار و بررسی متالورژیکی سطح شکست به منظور تشخیص علل اصلی شکست پره انجام گرفتند. بررسی‌ها نشان داد که حفره‌های قابل توجهی در سطح پره به وجود آمده و شواهد نشان از پیشرفت این حفره‌ها و ترک‌ها به دلیل وجود پدیده خستگی دارند. با بررسی سطح شکست مشخص شد ترک اولیه به دلیل پدیده خوردگی داغ ایجاد شده و با سازوکار خستگی از لبه حمله پره پیشروی کرده است که منجر به کاهش سطح مقطع شده و شکست رخ داده است.}, keywords_fa = {اینکونل 738LC,متالوگرافی,شکست پره,خستگی,توربین گازی}, url = {https://mej.aut.ac.ir/article_773.html}, eprint = {https://mej.aut.ac.ir/article_773_19a554dfbdec823c8d252fa04fb1f43e.pdf} } @article { author = {Hashemi, M. and Asghari, M.}, title = {Finite Element Analysis of Vibration Behavior of Micro-Rotors Utilizing a Developed Strain Gradient-Based Beam Element}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {113-124}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.795}, abstract = {ABSTRACT: In this paper, a three-dimensional finite element model is developed based on the strain gradient theory to investigate the vibration characteristics of micro-rotors. The model is not only capable of dealing with small-size effects, but also the flexibility of bearings, internal damping and mass eccentricity in the system. The expressions related to the strain energy of the shaft of the microrotor are derived on the basis of strain gradient theory together with the kinetic energy of the system considering mass eccentricity in the disk and rotary inertia and gyroscopic effects of the rotating shaftdisksystem. By using the extended Hamilton’s principle to obtain weak forms of governing equations and approximating displacement components by special interpolation functions which can be used to model a strain gradient based micro-beam, equations of the motion are discretized into a finite element form. The natural frequencies, critical speeds and the threshold of instability rotational speed of the micro-rotor are obtained by transforming discretized equations of motion into state space form. The response of the micro rotor under excitation of the mass eccentricity of the disk in forced vibrations isalso presented. Numerical results show profound effects of higher order material constant on vibration characteristics of the micro-rotor.}, keywords = {Micro-rotor,Strain gradient theory,Forced and free vibrations,Flexible bearing,Mass eccentricity}, title_fa = {ارائه فرمولاسیون اجزا محدود جهت تحلیل رفتار دینامیکی میکروروتورها براساس نظریه گرادیان کرنش}, abstract_fa = {چکیده: در این مقاله برای اولین بار فرمولاسیون اجزا محدود سه بعدی سامانه روتور، متشکل از میکروشافت دوار و دیسک‌های متصله براساس نظریه گرادیان کرنشی به منظور بررسی رفتار دینامیکی یا مشخصات ارتعاشاتی این سامانه ارائه شده است. مدل مذکور این امکان را فراهم می‌کند که ضمن در نظر گرفتن اثرات ناشی از قرار داشتن هندسه سامانه در ابعاد میکرو، تأثیرات مربوط به غیرصلب بودن یاتاقان‌ها، میرایی داخلی و نامیزانی در میکروروتور را مورد مطالعه قرار دهد. برای ارائه این فرمولاسیون، در ابتدا روابط مربوط به انرژی کرنشی سامانه براساس نظریه گرادیان کرنشی و انرژی جنبشی سامانه با وجود نامیزانی در دیسک حین حرکت عرضی، همراه با جملات مربوط به اینرسی ناشی از دوران و گشتاور ژیرسکوپیک بیان گردیده‌اند. سپس با استفاده از اصل تعمیم یافته همیلتون به منظور دستیابی به فرم ضعیف شده معادلات و تقریب متغیرهای مربوط به مؤلفه‌های جابه‌جایی عرضی میکروروتوربا توابع شکل مناسب، معادلات حرکت گسسته سازی شده‌اند و برای اولین بار ماتریس‌های جرم شافت و دیسک، اینرسی دورانی شافت و دیسک، میرایی یاتاقان، ژیرسکوپیکی شافت و دیسک، سختی و نیز ماتریس چرخشی براساس نظریه گرادیان کرنش برای سامانه روتور تعیین شده‌اند. به عنوان مثال‌هایی، مشخصات ارتعاشاتی سامانه میکروروتوری و نیز پاسخ سامانه در برابر حضور نامیزانی در دیسک آن ارائه شده است. نتایج عددی ارائه شده بعد از صحه‌گذاری مدل پیشنهادی، بیانگر تأثیر بارز ثابت مادی مرتبۀ بالابر مشخصات ارتعاشاتی میکروروتور شامل بسامدهای طبیعی، سرعت دورانی بحرانی، سرعت دورانی در آستانه ناپایداری سامانه و همچنین پاسخ سامانه در اثر حضور نامیزانی جرمی در دیسک می‌باشد.}, keywords_fa = {میکرو‌روتور,نظریه گرادیان کرنش,ارتعاشات آزاد و اجباری,یاتاقان انعطاف پذیر,نامیزانی}, url = {https://mej.aut.ac.ir/article_795.html}, eprint = {https://mej.aut.ac.ir/article_795_fb2b77c9a221502966ea45eafeb12966.pdf} } @article { author = {Davaq, A. and Moeenfard, H. and Moavenian, M.}, title = {Nonlinear Free Vibration in Flexure Beams with an Intermediate Rigid Element and a Tip Mass}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {125-136}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2017.11764.5178}, abstract = {ABSTRACT: A usual method in achieving a proper value for the ratio of constraint to degree of freedom stiffness in a compliant mechanism, is using an intermediate rigid element in its constitutive beams. This paper aims to study the nonlinear free vibration of a stiffened beam with a mass connected to its tip. Hamilton’s principle is used to find nonlinear partial differential equations governing behavior of the beam. The mode-shapes of the normalized and linearized system are then found analytically and verified via Abaqus simulations. Using a single mode approximation, the first mode-shape of the system is used along with the Lagrange equations to find governing ordinary differential equations of degree of freedomand degree of constraint dynamic. These equations are then solved numerically using MATLAB. The Discrete Fourier Transform of dynamic responses show that the degree of freedom dynamic contains a single dominant frequency, while the constraint dynamic contains three main harmonics. It is observed that dominant frequencies are essentially natural frequencies of the linearized system which are available in a closed form. The suggested analytical formulations as well as the proposed frequency analysis, is expected to provide an effective approach for analytical dynamic modeling of more complex compliant mechanisms.}, keywords = {Flexure beam,Rigid intermediate element,Nonlinear oscillations,Mode shape,Frequency analysis}, title_fa = {ارتعاشات آزاد غیر خطی در تیرهای منعطف با بخش میانی صلب و جرم نوک}, abstract_fa = {چکیده: یک روش معمول به منظور بهینه کردن سفتی درجه آزادی یک سازوکار منعطف استفاده از یک جسم صلب میانی در تیرهای منعطف آن است. هدف این مقاله، بررسی ارتعاشات آزاد غیرخطی یک تیر منعطف با بخش میانی صلب است که درانتهای آن یک جرم متمرکز وصل شده است. به منظور تعیین معادلات دیفرانسیل جزئی غیرخطی حاکم بر رفتار تیر از اصلهمیلتون استفاده می‌شود. سپس شکل مدهای خطی شده و بی بعد تیر منعطف به روش تحلیلی محاسبه می‌شود و با نتایج حاصله از نرم افزار آباکوس مقایسه می‌گردد. به کمک شکل مد اول سازوکار و معادلات لاگرانژ، معادلات دیفرانسیل دینامیکی حاکم به دست می‌آید. آنگاه این معادلات به صورت عددی به کمک نرم افزار متلب حل می‌گردد. تبدیل فوریه گسسته پاسخ‌هایدینامیکی نشان می‌دهد که پاسخ دینامیکی عرضی تنها یک بسامد اصلی دارد؛ در حالی که پاسخ‌های محوری دینامیکی دارای سه بسامد اصلی می‌باشد. مشاهده می‌شود که این بسامدها، همان بسامدهای طبیعی سامانه خطی است که به صورت تحلیلی با فرم بسته قابل ارائه هستند. رویکرد ارائه شده در این پژوهش می‌تواند برای تحلیل و بهینه‌سازی رفتار دینامیکی سازوکارهایمنعطف مورد استفاده قرار بگیرد.}, keywords_fa = {تیر منعطف با بخش میانی صلب,ارتعاش غیر خطی,شکل مد,تحلیل فرکانسی}, url = {https://mej.aut.ac.ir/article_997.html}, eprint = {https://mej.aut.ac.ir/article_997_5d317dc786fe96255675a6493dc629a0.pdf} } @article { author = {Zandi Baghche Maryam, A. and Hosseini, M.}, title = {Using Green Function Method to Dynamic Analysis of Nanotubes Conveying Fluid Under Moving Load}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {137-150}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.738}, abstract = {ABSTRACT: In this paper, the dynamic response of carbon nanotubes (CNT) conveying fluid under movingharmonic load by using the Green function method is investigated. The results of this analysis are obtained for fourdifferent boundary conditions, namely fixed- fixed, fixed- pinned, pinned- fixed and pinned -pinned. The harmonicload is assumed to travel with uniform velocity, accelerating and decelerating types of motion and the internal fluidflow is moved with uniform velocity. The Green function and Laplace transform method is implemented to analysisof force vibrations for achieving exact solutions of dynamic response. In the present work, the effects of variousparameters such as viscoelastic coefficient, moving load and fluid flow velocity, length scale parameter, boundaryconditions, viscous damping and types of the load motion on the dynamic displacement of the CNT are elucidated.However, the results show that these parameters are vital in investigation of the dynamic displacement of CNT. It isobvious that the dynamic deflection is very sensitive to the material length scale parameter in which structural stiffnessof CNT and the dimensionless dynamic displacements, respectively, is decreased and increased with increases in thelength scale parameter.}, keywords = {Carbon nanotubes conveying fluid,Moving harmonic loads,Boundary conditions,Types of load motion,Green function method}, title_fa = {به کارگیری روش تابع گرین در تحلیل دینامیکی نانولوله حامل سیال تحت نیروی متحرک}, abstract_fa = {چکیده: در این مقاله پاسخ دینامیکی نانولوله کربنی حامل سیال تحت نیروی متحرک هارمونیک با استفاده از روش تحلیلی تابع گرین بررسی شده است. نتایج این بررسی برای چهار شرایط مرزی مختلف، دوسرگیردار، یک سر‌گیردار - یک سرمفصل، یک-سرمفصل - یک‌سرگیردار و دوسرمفصل به‌دست آمده است. نیروی متحرک با سرعت یکنواخت، شتاب تندشونده و شتاب کندشونده و جریان سیال با سرعت یکنواخت حرکت می‌کند. به-منظور تحلیل پاسخ دینامیکی نانولوله کربنی از تبدیل لاپلاس و تابع گرین استفاده شده است، که می توان حل دقیقی از تغییر مکان با استفاده از این روشها به‌دست آورد. در این بررسی تأثیر تغییرات پارامترهای مختلف از جمله ضریب ویسکوالاستیک، سرعت جریان سیال و نیروی متحرک، پارامتر مقیاس طول، شرایط مرزی، ضریب میرایی و حالت‌های حرکت نیرو بر تغییر مکان نانولوله کربنی مورد مطالعه قرار می‌گیرد. نتایج نشان می‌دهد که پارامترهای ذکر شده، تأثیر قابل توجهی در تغییر مکان نانولوله کربنی دارند. مشاهده گردید که تغییر مکان دینامیکی به پارامتر مقیاس طول بسیار حساس بوده به‌طوری که افزایش آن موجب افزایش تغییر مکان و کاهش سفتی سیستم می‌شود.}, keywords_fa = {نانولوله کربنی حامل سیال,روش تابع گرین,نیروی متحرک هارمونیک,شرایط مرزی مختلف,حالت‌های مختلف حرکت نیرو}, url = {https://mej.aut.ac.ir/article_738.html}, eprint = {https://mej.aut.ac.ir/article_738_a37ad7fc31829216bd6d771a6807c871.pdf} } @article { author = {Shooshtari, A. and Atabakhshian, V.}, title = {Stability Analyses and Dynamic Response of Fluid Conveyed Thin-Walled Piezoelectric Cylinder Under Harmonic Excitation}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {151-162}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.876}, abstract = {ABSTRACT: In this paper, the vibration and instability analyses of a thin-walled smart cylinder subjected to the combined electro-thermo-mechanical loadings as well as internal fluid flow are investigated based on piezoelasticity theory and nonlinear Donnell’s shell theory. The cylinder material is considered to be made of piezo-ceramics as PZT4 to have a better resistance to the fluids. The fluid flow is assumed to be incompressible, inviscid, irrotational and isentropic where its mathematically modeling is performed based on a potential scalar function. The higher order governing equations of motion are directly obtained by minimizing the energy of the system, using Lagrange equation of motions and modal expansion analysis. The obtained governing equations are then solved via the state space problem as well as fourth order numerical integration to obtain the nonlinear electro thermodynamical response of the system. In the numerical results section, the effects of various parameters such as mean flow velocity, aspect ratio, temperature change and excitation frequency on the natural and damping frequencies, electro-thermo-dynamical response and energy spectrum of the system is studied in detail.It is hoped that the results of this study play an important role to design new instability alert sensors for fluid conveying pipes.}, keywords = {Smart materials,nonlinear vibration,Fluid flow,Cylindrical shell,Harmonic excitation}, title_fa = {تحلیل پایداری و پاسخ دینامیکی استوانۀ پیزوالکتریک جدار نازک، تحت جریان سیال و تحریک هارمونیک خارجی}, abstract_fa = {چکیده: پایداری دینامیکی و ارتعاشات غیرخطی استوانه هوشمند جدار نازک، تحت عبور جریان سیال داخلی، نیروی تحریک متمرکز خارجی و گرادیان حرارتی یکنواخت، در این نوشتار مورد بررسی قرار می‌گیرد. جنس پوسته از مواد پیزوسرامیک مقاوم در برابر سیال در نظر گرفته شده و با استفاده از مدل غیرخطی پوسته استوانه ای مدل سازی می‌شود. جریان سیال عبوری غیر قابلتراکم، غیر چرخشی، غیر لزج و ایزنتروپیک فرض شده و مدل سازی دینامیکی آن نیز با استفاده از تابع اسکالر پتانسیل جریان صورت می‌پذیرد. دستگاه معادلات کوپله شده و غیرخطی حرکت حاکم بر سامانه با استفاده از روش انرژی و بسط مودهای جاب هجایی و الکتریکی حاصل گردیده که با حل دسته معادلات مرتبط با شارژ الکتریکی واجفت می‌گردند. در ادامه ابتدا با حذف جملات غیرخطی در معادلات حرکت و حل مسأله مقدار ویژه مودهای ارتعاشی سامانه، سرعت بحرانی و نواحی پایدار سامانه استخراج گردیده و سپس با استفاده مدل فضای حالت و انتگرال‌گیری عددی مرتبه چهار رانج کوتا پاسخ الکتروترمودینامیکی غیرخطی سامانه حاصل گردیده است. نتایج حاصله ارتباط مستقیم میزان پتانسیل القایی در پوسته با دامنه ارتعاشات عرضی آن را نشان داده که به‌منظور استفاده در هشداردهنده‌های ناپایداری کاربرد دارد.}, keywords_fa = {مواد پیزوالکتریک,پایداری دینامیکی,ارتعاشات القایی,سیال,تحلیل غیرخطی}, url = {https://mej.aut.ac.ir/article_876.html}, eprint = {https://mej.aut.ac.ir/article_876_f5b021c1f73d6ce9fc2a4f83c032bb1c.pdf} } @article { author = {Nabipour, M. and Kabganian, M. and Saberi, F. F.}, title = {Designing an Adaptive Control Algorithm for Amirkabir’s Laboratory Attitude Simulator of a Spacecraft}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {163-174}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.764}, abstract = {ABSTRACT: In this paper, after presenting a brief introduction about Amirkabir University of Technology’sattitude simulator, governing equations are obtained. Viscous friction model is chosen to model the existing frictionin the bearings of the attitude simulator. The main purpose of this paper is to design an adaptive attitude controlalgorithm for the attitude simulator in order to control it in the desired path and estimate the coefficients of frictiondue to simulator’s bearings. In order to prevent singularity in simulations, Rodriguez parameters are used forkinematics representation. Firstly, the governing equations are transformed into a robotic form. The moments ofinertia and coefficients of viscous friction model are assumed as uncertainties. Then, by introducing a Lyapunovfunction, the stability of the system is checked and the parameters are estimated. The adaptation law is obtainedby the Lyapunov function and the stability of the system is then proved. In order to demonstrate the efficiency ofthis adaptive control algorithm, a nonlinear Lyapunov-based attitude control algorithm is designed and compared tothe adaptive controller. The simulations are done in Matlab software package and the parameters of the moment ofinertia matrix and coefficients of viscous friction model are estimated by the adaptation law of the controller. Duringthe simulation, the rotational velocity of the reaction wheels are obtained and it is shown that this attitude controlalgorithm is implementable on the attitude simulator.}, keywords = {Satellite,Attitude Simulator,Robotic form of satellite dynamic equation,Adaptive control,Parameter estimation}, title_fa = {طراحی کنترل کنندۀ وضعیت تطبیقی برای شبیه ساز آزمایشگاهی سمت فضاپیما}, abstract_fa = {چکیده: در این مقاله پس از معرفی مختصری از شبیه‌ساز سمت دانشگاه صنعتی امیرکبیر به استخراج روابط حاکم بر آن پرداخته می‌شود. به‌دلیل وجود اصطکاک در یاتاقان‌های شبیه‌ساز سمت، در دینامیک شبیه‌ساز از مدل اصطکاک ویسکوز برای مدل‌سازی اصطکاک در یاتاقان‌ها استفاده می‌شود. هدف این مقاله طراحی یک کنترل‌کنندۀ وضعیت تطبیقی برای کنترلشبیه‌ساز سمت و تخمین ضرایب اصطکاک ویسکوز یاتاقان‌ها می‌باشد. به‌منظور جلوگیری از پدیده تکینگی در روابط حاکم، از پارامترهای رودریگز برای نمایش سینماتیک شبیه‌ساز استفاده می‌شود. ابتدا روابط حاکم بر شبیه‌ساز به فرم رباتیکی استخراج می‌شود. سپس پارامترهای تانسور ممان اینرسی شبیه‌ساز سمت و ضرایب اصطکاک ویسکوز به عنوان پارامترهای نامعلوم سامانه انتخاب م یشوند. در مرحله بعد با تعریف یک تابع لیاپانوف و بررسی پایداری سامانه، پارامترها به گون های تخمین زده م یشوند که خطا محدود شده و سامانه پایدار گردد. در مرحله بعد شبیه‌سازی سامانه در نرم‌افزار متلب انجام شده و تخمین پارامترهای تانسور اینرسی و ضرایب اصطکاک ویسکوز به‌دست می‌آیند. در نهایت با به‌دست آمدن نمودارهای مربوط به سرعت عملگرهای چرخ عکس‌العملی نشان داده خواهد شد که این کنترل کنندۀ وضعیت قابلیت پیاده‌سازی بر روی شبیه‌ساز سمت امیرکبیر را دارد.}, keywords_fa = {ماهواره,شبیه‌ساز سمت,فرم رباتیکی دینامیک ماهواره,کنترل تطبیقی,تخمین پارامترها}, url = {https://mej.aut.ac.ir/article_764.html}, eprint = {https://mej.aut.ac.ir/article_764_e7bd7765cac9da5c39b0a5d9310ccf0c.pdf} } @article { author = {Zeinolabedini, M. R. and Rafeeyan, M.}, title = {Free and Forced Whirling Analyses of Rotors with Multiple Unbalanced Discs Under Axial Force}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {175-188}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.777}, abstract = {In this paper the set of equation for free and forced whirling analyses of rotors with any number of discs is derived. By considering gyroscopic effects, the rotor is modeled based on the Timoshenko beam theory and discs are considered as concentrated elements having both translational and rotational inertias. At the position of each disc, the rotor is imposed to distributed and concentrated axial forces which vary versus time. Also, transverse load composed of unbalanced masses and total weight of the system is considered. For forced whirling analysis, static deflection of the rotor is considered as the initial conditions and rotational speed of the rotor is considered as a time variable parameter which increases from zero to its nominal value in a limited period of time. For a simply supported rotor, the free whirling analysis is investigated using Galerkin method and using Galerkin and Newmark-beta methods, the forced whirling analysis is studied numerically. Forward and backward frequencies and Campbell diagrams are presented in free whirling analysis and variation of deflection, bending moment and shear force in any point of the rotor are depicted versus time in forced whirling analysis. The most advantages of the presented paper are consideration of time-dependency of rotating speed in forced whirling analysis and its applicability for rotors with any number of mounted discs.}, keywords = {Whirling,Rotor,Axial force,Unbalanced disc}, title_fa = {لنگش آزاد و اجباری محورهای حامل دیسک‌های نامیزان تحت اثر نیروی محوری}, abstract_fa = {در این پژوهش معادلات حاکم بر لنگش آزاد و اجباری یک محور حامل تعداد دلخواه دیسک استخراج شده است. محور با استفاده از تئوری تیر تیموشنکو و افزودن اثرات ژیروسکوپی مدل سازی شده و دیسک‌‌ها به صورت اجرام متمرکز دارای اینرسی‌‌‌‌های انتقالی و دورانی در نظر گرفته شده‌‌اند. دو نوع گسترده و متمرکز از نیروی محوری نیز بر روی هر دیسک در نظر گرفته شده که تابعی از زمان بوده و محل نیروی متمرکز نیز نقطه ای دلخواه بر روی دیسک در نظر گرفته شده است. نیروی عرضی ناشی از نامیزانی جرم در دیسک‌‌ها و وزن کل مجموعه در تحلیل لنگش اجباری در نظر گرفته شده‌‌اند. در تحلیل لنگش اجباری، خیز استاتیکی محور به عنوان شرایط اولیه در نظر گرفته شده است و فرض بر آن است که سرعت دورانی محور از حالت سکون رفته رفته افزایش یافته تا در مدت زمان مشخص به مقدار نامی خود برسد. برای شرایط مرزی ساده در دو طرف محور و با استفاده از روش گالرکین لنگش آزاد محور بررسی شده و سپس با استفاده از روش‌‌‌‌های گالرکین و نیومارک- بتا، لنگش اجباری محور مورد تحلیل قرار گرفته است. در تحلیل لنگش آزاد فرکانس‌‌‌‌های پیشرو و پسرو و همچنین دیاگرام کمپبل برای محور رسم شده‌‌اند و در تحلیل لنگش اجباری نمودار تغییرات زمانی خیز، گشتاور خمشی و نیروی برشی در نقاط دلخواه از محور رسم شده‌‌اند. از نکات برجسته‌ی این تحقیق می‌توان به این مورد اشاره نمود که در مقایسه با تحلیل لنگش آزاد، لنگش اجباری محورها بسیار کم مورد توجه محققین قرار گرفته است که این مورد در این مقاله بررسی شده است. همچنین در نظر گرفتن سرعت زاویه ای متغیر با زمان، نیروی محوری متغیر با مکان و زمان و عدم وجود محدودیت در تعداد دیسک‌‌های موجود بر روی محور از دیگر نقاط برجسته‌ی این پژوهش می‌باشند؛ این موارد باعث شده‌اند که مساله‌ی بررسی شده هر چه بیشتر به آنچه در واقعیت رخ می‌دهد نزدیک‌تر باشد.}, keywords_fa = {لنگش,محور دوار,نیروی محوری,نامیزانی}, url = {https://mej.aut.ac.ir/article_777.html}, eprint = {https://mej.aut.ac.ir/article_777_2d3c1e656a21bd6028e2df4c41e23615.pdf} } @article { author = {Shahmiri, F. and Sarafraz, Y.}, title = {Examination of Helicopter Dynamic Response Using Dynamic Inflow Model}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {189-196}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.806}, abstract = {This paper concerned with the examination of on-axis and off-axis dynamic responses of helicopters using a dynamic induced velocity model for a main rotor. The model consisted a canonical Legendry polynomial and a trigonometric function with a time dependent coefficients and arbitrary harmonics. The main reason for this, was the compatibility of the Legendry polynomial with the potential acceleration function presented by Laplace PDE for a main rotor at incompressible flow condition in elliptical coordinate system. The Laplace equation was previously solved through the separation of variables with discontinuity of pressure over the rotor disc and cylindrical skewed wake below the rotor. The novel of the present research is the inflow dynamics with finite state wake that was efficiently adopted with the dynamic equations of single main rotor helicopters (rigid fuselage, elastic main rotor, horizontal and vertical tail) in the time domain. Therefore, the discretization of the wake inflow was avoided by the definition of finite inflow states. Furthermore, the possibility of air load computations is achieved through the state formulation and quasi steady aerodynamic implementation. Moreover, the singularity problem associated with the traditional inflow dynamics was avoided through the current inflow state. The obtained results showed that using dynamic inflow model with 28-state and 4- harmonics significantly improves the off-axis dynamic responses of single main rotor helicopters. Comparison of the obtained results with the flight-test data and with the other dynamic inflow models showed that both the off-axis and on-axis response of helicopters experience a fairy good improvements.}, keywords = {Helicopter,Main rotor,Dynamic induced velocity,Dynamic simulation}, title_fa = {بررسی تأثیر مدل دینامیکی سرعت القایی روتور اصلی بر پاسخ‌های دینامیکی بالگرد}, abstract_fa = {در این مقاله پاسخ‌های دینامیکی مستقیم و غیر مستقیم بالگرد با استفاده از مدل دینامیکی سرعت القایی روتور اصلی بررسی می‌شود. مدل دینامیکی سرعت القایی، یک مدل متشکل از حاصل‌ضرب یک‌چند جمله‌ای لژاندر کانونی در یک تابع مثلثاتی با تعداد هارمونیک دلخواه و با ضرایب وابسته به زمان است. علت انتخاب ‌‌این مدل تطابق آن با جواب‌های کلی معادله دیفرانسیل پاره‌ای لاپلاس فشار در دستگاه مختصات بیضوی برای جریان تراکم‌ناپذیر است که پیشتر با استفاده از روش جداسازی متغیرها و اعمال شرط گسستگی فشار درسطح روتور اصلی و فرض جریان استوانه‌ای در هم تنیده در پایین‌دست روتور اصلی محاسبه گردید. اما نوآوری ‌‌این تحقیق در انتخاب ‌‌این مدل دینامیکی برای محاسبه سرعت القایی و الصاق آن به سایر معادلات دینامیکی شش درجه آزادی بالگرد (بدنه صلب، روتور اصلی با پره‌های الاستیک، روتور دم، دم افقی و عمودی) بدون نیاز به گسسته‌سازی روابط در حوزه زمان است. با استفاده از ‌‌این مدل امکان محاسبه نیروها و گشتاورهای ‌‌آیرودینامیک پره‌های روتور اصلی بدون نیاز به روابط پپچیده ‌آیرودینامیک غیردائم میسر می‌شود. علاوه بر‌‌ این، جلوگیری از تکیدگی جواب‌ها در فواصل مکانی مشخص از روتور اصلی از دیگر نقاط قوت‌‌ این مدل دینامیکی است. نتایج حاصل از شبیه‌سازی دینامیکی بالگرد با استفاده از مدل دینامیکی مذکور با فرض چند جمله‌ای درجه شش و تابع مثلثاتی با چهار هارمونیک که منجر به 28 معادله دیفرانسیل مرتبه اول شد در مقایسه با نتایج تست پرواز موجود متضمن بهبود کیفی و کمّی در پیش‌بینی پاسخ‌های دینامیکی مستقیم و غیر مستقیم بالگرد در پرواز کروز است.}, keywords_fa = {بالگرد - روتور اصلی,مدل دینامیکی سرعت القایی,شبیه‌سازی دینامیکی}, url = {https://mej.aut.ac.ir/article_806.html}, eprint = {https://mej.aut.ac.ir/article_806_ec3ff1e4fda7882d21cd4bfac8de5499.pdf} } @article { author = {Ghadami, A. and Fazelzadeh Haghighi, S. A. and Mazidi, A.}, title = {Flutter Analysis of Adaptive Wing with the Adjustment of Spar Position}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {197-206}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.784}, abstract = {In this paper, the flutter of an adaptive wing with adjustment of spar position is studied. Despite of two-dimensional models which was used in earlier research on this subject, in this study, more realistic model of the wing with adjustment of spar position contains sweep angle and unsteady aerodynamic loadings is employed. Two uniform spars which can move in chordwise direction are considered along the wing. The wing bending and torsion equations of motion have been derived by Hamilton’s principle.  In order to use this principle, kinetic energy, strain energy and virtual work of forces have been obtained for spars and wing separately and then their sum embedded in the Hamilton’s principle. To simulate the aeroelastic loading on the wing Peter’s unsteady aeroelastic model is used. Assumed mode method has been used to discretized the aeroelastic governing equations and the numerical results has been validated with previous published papers, which good agreement has been reported. To review and presentation of results, four different types of motion for two spars have been utilized. In each type of motion, initial and final situation of spars are considered based on their velocity. Comparison of adaptive wing with simple wing in the same conditions shows that flutter velocity and frequency increases for adaptive wing. Finally, effects of different design parameters on the aeroelastic behavior of adaptive wing have been evaluated. Results indicate that these parameters can influence the stability region of such wings, significantly. Results indicates that increasing the thickness of the wing skins and spars reduces the wing flutter speed.}, keywords = {Adaptive wing,Adjustment of spar position,Flutter,Unsteady loading model}, title_fa = {تحلیل فلاتر بال تطبیقی با تنظیم موقعیت تیرک}, abstract_fa = {در این مقاله فلاتر یک بال تطبیقی با تنظیم موقعیت تیرک مورد بررسی قرار گرفته است. بر خلاف مدل­های دوبعدی که معمولا در پژوهش‌­های پیشین برای شبیه سازی این نوع بال به‌کار گرفته شده اند، در این تحقیق  بال با تغییر مکان تیرک ها  با زاویه عقبگرد و بارگذاری آیرودینامیک ناپایا مدلسازی شده است. دو تیرک اصلی که در راستای طولی بال یکنواخت هستند و می‏توانند در راستای وتر ایرفویل حرکت نمایند در نظر گرفته‌ شده است. معادلات حرکت، با در نظر گرفتن مودهای خمش و پیچش، با استفاده از اصل هامیلتون، به‌دست‌ آمده‏اند. جهت استفاده از این اصل، انرژی­های جنبشی، پتانسیل و کار مجازی نیروها برای تیرک­ها و بال به طور جداگانه بدست آمده است و سپس مجموع آنها در اصل هامیلتون جایگذاری شده است. به منظور شبیه سازی نیروهای آیروالاستیک بر روی بال،  از مدل ناپایای پیترز  استفاده شده است و داده‏های عددی با استفاده از روش حل تقریبی گالرکین آنالیز و نسبت به مطالعات قبلی اعتبارسنجی شده است که نتایج همخوانی قابل‌‏قبولی دارد. جهت بررسی و ارائه­ی نتایج، چهار حالت مختلف حرکت برای دو تیرک در نظر گرفته شده است که با توجه به سرعت هر تیرک که در حالت­های مختلف متفاوت می­‌باشد، موقعیت ابتدایی و نهایی تیرک­ها مشخص می­گردد. مقایسه بال تطبیقی با بال ساده در شرایط یکسان نشان می دهد که در بال­های تطبیقی سرعت و فرکانس فلاتر افزایش می­یابد. سپس اثر پارامترهای طراحی مختلف بر رفتار آیروالاستیک بال تطبیقی هواپیما مورد بررسی قرار گرفته است.  نتایج نشان می‌­دهد که این پارامترها می‏توانند تأثیر قابل‏ توجهی بر روی محدوده پایداری این‌ بال‏ها بگذارند. نتایج نشان می­دهند که با افزایش ضخامت پوسته­‌ی بال و ضخامت تیرک­ها، سرعت فلاتر کاهش می­‌یابد.}, keywords_fa = {بال تطبیقی,تنظیم موقعیت تیرک,فلاتر,مدل بارگذاری ناپایا}, url = {https://mej.aut.ac.ir/article_784.html}, eprint = {https://mej.aut.ac.ir/article_784_4c1621b7da630f64d5e977ecc9c5720f.pdf} } @article { author = {Fanni, E. and Khodayari, A.}, title = {Designing a New Intelligent Image Processing Algorithm for Traffic Sign Detection and Recognition Based on Fuzzy Logic}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {207-218}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.756}, abstract = {A new algorithm for traffic sign detection and recognition based on image processing was presented in this paper. This algorithm has three stages that consist of preprocessing, detection and recognition. In preprocessing stage, input image quality enhancement and unrelated data elimination be done by applying image processing algorithms. In recognition stage an intelligent machine vision algorithm is used to extract concepts of traffic signs. Detection stage is designed for decrease the operation time and increase the recognition algorithm accuracy. In this stage, traffic sign candidates are elected more accurately and they are transmitted to recognition stage. Fuzzy logic and mathematics is used in all of image processing and machine vision stages that consist of low and high level processing. Also for traffic sign recognition, invariant features are used to design a fuzzy logic algorithm to extract traffic sign concepts. Fuzzy logic and mathematics give Inference and intelligent capabilities to smart system to make correct decision in actual conditions like human. All stages of this algorithm was implemented in MATLAB. Also for performance investigation of this algorithm experimental scenarios in actual situation are designed. The results show that designed algorithm has an appropriate performance in traffic sign detection and recognition up to 92.68 percent in actual situations. Compared with other methods with the same experimental conditions the accuracy of the proposed algorithm is satisfactory. This algorithm can be used to design driver assistance and control systems for intelligent vehicles.}, keywords = {Traffic sign detection and recognition,Image processing,Fuzzy Logic,Invariant features}, title_fa = {ارائه یک الگوریتم پردازش تصویر هوشمند جدید برای تشخیص و شناسایی علائم راهنمایی و رانندگی مبتنی بر منطق فازی}, abstract_fa = {در این مقاله یک الگوریتم هوشمند جدید برای تشخیص و شناسایی علائم راهنمایی و رانندگی، براساس پردازش تصویر و منطق فازی، ارائه می‌شود. این الگوریتم شامل سه مرحله پیش‌پردازش، تشخیص و شناسایی می‌باشد. در مرحله پیش‌پردازش با اعمال الگوریتم‌های پردازش تصویر، تغییرات به منظور بهبود کیفیت تصویر دریافتی و حذف داده‌های نامرتبط با هدف مورد نظر انجام می‌گیرد. در مرحله شناسایی یک الگوریتم بینایی ماشین هوشمند برای استخراج مفاهیم علائم راهنمایی و رانندگی استفاده شده است. به منظور کاهش زمان عملیات و افزایش دقت الگوریتم شناسایی، مرحله تشخیص طراحی شده است. در این مرحله، کاندیداهای علائم راهنمایی و رانندگی با دقت بیشتری انتخاب و در اختیار مرحله شناسایی قرار می‌گیرند. در تمام مراحل پردازش تصویر و بینایی ماشین، که شامل پردازش‌های سطح پایین و پردازش‌های سطح بالا و پیچیده می‌باشد، از منطق و ریاضیات فازی استفاده شده است. همچنین برای تشخیص و شناسایی علائم راهنمایی و رانندگی، از ویژگی‌های تغییرناپذیر برای استفاده در منطق فازی و استخراج مفاهیم، بهره برده شده است. استفاده از منطق و ریاضیات فازی قابلیت استنتاج و هوشمندی همانند انسان را برای تصمیم‌گیری در شرایط واقعی، در اختیار سیستم هوشمند قرار می‌دهد. مراحل کامل این الگوریتم در نرم‌افزار متلب پیاده‌سازی شده است. همچنین آزمایش‌های عملی در شرایط واقعی برای بررسی عملکرد این الگوریتم طراحی و انجام شده است. نتایج حاصل از آزمایش، عملکرد مناسب این الگوریتم تا 92.68 درصد صحت، در تشخیص و شناسایی علائم راهنمایی و رانندگی در شرایط واقعی را نشان می‌دهد. الگوریتم ارائه شده، در مقایسه با الگوریتم‌های دیگر با شرایط آزمایشی مشابه، از صحت عملکرد مناسبی برخوردار است. از این الگوریتم می‌توان برای طراحی سیستم‌های کمک راننده و سیستم‌های کنترلی با هدف هوشمند سازی خودرو استفاده نمود.}, keywords_fa = {تشخیص و شناسایی علائم راهنمایی و رانندگی,پردازش تصویر,منطق فازی,ویژگی‌های تغییرناپذیر}, url = {https://mej.aut.ac.ir/article_756.html}, eprint = {https://mej.aut.ac.ir/article_756_12a5eb622fc1a1a6df774b43dd896c57.pdf} } @article { author = {Broghany, M. and Saffar, S. and Basirjafari, S.}, title = {Increasing the Frequency Band of Sound Absorption for Flat Multi-Layered Absorbers Consisting of Porous Material, Perforated Panel and Air-Gap}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {1}, pages = {219-230}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2017.12042.5247}, abstract = {Sound pollution, especially in metropolises, is a critical issue at the time being. Hence, appropriate sound absorbers which absorb higher noise in a wide range of frequencies are desirable especially when less occupied space is needed. In the present study, four primary models are proposed by combination of the porous material, micro-perforated panels and air gap. Afterwards, sound absorption coefficient was maximized in every proposed model by employing both analytical approach (transfer matrix method) and finite element method (by COMSOL Multi-physics version 4.4). Verification has been carried out by comparison with the theoretical and experimental results of previous studies. The results showed well agreement between present and previous results. Consequently, an optimized model by maximum sound absorption coefficient was proposed. The proposed model showed the average of sound absorption coefficient equal to 0.9 which is approximately 5% more than previous studies in the frequency range of 1 to 6000 Hz for 51 mm thickness of panel. In other words, the presented structure, with a less thickness has the same sound absorption coefficient of the commercial industrial structures. This is very important in terms of engineering because the presented sound absorber takes up less space and also, running costs are reduced.}, keywords = {Sound absorption coefficient,Composite absorber,Transfer matrix method,finite element method,Perforated panel}, title_fa = {افزایش پهنای باند بسامدی جاذب‌های صوتی چندلایه تخت متشکل از ماده متخلخل، صفحه سوراخ‌دار و فاصلۀ هوایی}, abstract_fa = {چکیده: امروزه جاذب‌هایی که نوفه را در پهنای وسیعی از بسامدها جذب کنند و نیز کمترین فضا را در سازه به‌خود اختصاص دهند، بسیار مورد توجه است. در این مقاله با استفاده از ترکیب مادۀ متخلخل، صفحۀ سوراخ‌دار و فاصلۀ هوایی، چهار نمونه اولیه پیشنهاد شده و در ادامه به منظور افزایش میزان و پهنای باند جذب صوتی، مشخصه‌های نمونه‌ای که بیشترین جذب صوتی را داشته، استخراج شده است. برای بررسی عملکرد جذب صوتی ساختارهای ارائه شده از روش ماتریس تبدیل و روش اجزا محدود استفاده شده است. برای صحه‌گذاری مدل ریاضی و نتایج روش اجزا محدود، نتایج نظری و تجربی برای دو نمونۀ مختلف از جاذب مرکب مقایسه شده‌اند که تطابق مناسبی را نشان م یدهند. نتایج نشان می‌دهند که میانگین ضریب جذب صوتی مدل بهبود یافته، با ضخامت نهایی 51 میلیمتر در گسترۀ بسامدی 9/ 0، Hz – 6000 Hz 1 است که نسبت به ساختارهای ارائه شده در کارهای گذشته، بدون افزایش ضخامت کلی، % 5 بهبود در میزان جذب دارد. به عبارتی، با ضخامت کمتری به همان ضریب جذب متداول در ساختارهای موجود در صنعت می توان دست یافت و این امر از نظر مهندسی بسیار مهم است؛ چون فضای کمتری اشغال می شود و هزینه اجرا نیز کاهش می یابد.}, keywords_fa = {ضریب جذب صوتی,جاذب مرکب,روش ماتریس تبدیل,شبیه‌سازی اجزای محدود,صفحه سوراخ‌دار}, url = {https://mej.aut.ac.ir/article_1033.html}, eprint = {https://mej.aut.ac.ir/article_1033_4f118a4235314f24a641c98ad9555f17.pdf} }