@article { author = {Eslami farsani, Reza and Khalili, Seyed Reza and Najafi, Moslem}, title = {Tensile behavior of basalt and carbon fiber reinforced phenolic matrix composites under thermal shock cycles}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {44}, number = {2}, pages = {1-9}, year = {2013}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2013.27}, abstract = {The aim of the present work is to investigate the effect of thermal shock cycling on the tensile behavior of two types polymer-matrix composites (phenolic resin, reinforced with woven basalt and carbon fibers at a total volume fraction of approximately 35%) in oxidative atmospheres (air). During the thermal shock cycling test performed in air, there is a coupling effect between matrix oxidation, occurring at the high temperatures of the cycle, and matrix cracking due to thermo-mechanical ply stresses induced by the differences in the thermal expansion coefficients between the reinforcement and the matrix phase. The tensile properties of composites reinforced with woven basalt fibers were not significantly affected by thermal shock cycles. The reduction of tensile strength and elastic modulus after thermal cycling was less than 5% and 8% of initial values for composites reinforced with basalt fibers and more than 11% and 18.5% for composites reinforced with carbon fibers, respectively. }, keywords = {Thermal shock cycling,Phenolic resin,Carbon fibers,Basalt fibers}, title_fa = {بررسی رفتار کششی کامپوزیت های زمینه فنولیک تقویت شده با الیاف بازالت و کربن تحت اثر دوره شوک حرارتی}, abstract_fa = {هدف از این مقاله بررسی اثر دوره شوک حرارتی بر رفتار کششی دو نوع کامپوزیت پایه پلیمری تقویت شده با الیاف در محیط اکسید­کننده (هوا)است. کامپوزیت­های مورد آزمایش شامل رزین فنولیک به عنوان ماتریس و تقویت­کننده­های الیاف بازالت و الیاف کربن با نسبت حجمی 35% درصد است. در زمان اعمال دوره شوک حرارتی در محیط هوا، امکان بروز پدیده اکسیداسیون ماتریس در دمای بالا و ترک خوردگی آن به علت تنش­های حرارتی ناشی از تفاوت ضرائب انبساط حرارتی ماتریس و الیاف وجود دارد. با افزایش تعداد دوره شوک حرارتی، خواص کششی کامپوزیت­های دارای الیاف بازالت بطور جدی تحت اثر قرار نمی­گیرد. در پایان دوره­های شوک حرارتی، کاهش استحکام کششی و مدول الاستیک در کامپوزیت دارای الیاف بازالت به ترتیب کمتر از 5 و 8 درصد و در کامپوزیت تقویت شده با الیاف کربن به ترتیب بیش از 11 و 5/18 درصد مقادیر اولیه خواهد بود. }, keywords_fa = {دوره شوک حرارتی,رزین فنولیک,الیاف کربن,الیاف بازالت}, url = {https://mej.aut.ac.ir/article_27.html}, eprint = {https://mej.aut.ac.ir/article_27_35e47e366b33e78859044b311911962c.pdf} }