@article { author = {nematollahi, erfan and Sefid, Mohammad}, title = {Numerical Study of Mixing in Double and Multiple T-Shaped Micromixers with Aligned and Non-Aligned Inputs}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {52}, number = {7}, pages = {1715-1728}, year = {2019}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2019.15037.6006}, abstract = { In this numerical investigation mixing behavior of two fluids water and ethanol with various density and viscosity mixing in 5 types of T-micromixers has been studied. The Geometries under research include 1 and 2 geometries are Multiple T-micromixer with non-aligned inputs in one and two plane respectively, and the 3, 4 and 5 geometries are included Multiple T-micromixer, double T-micromixer and T-micromixer. computational fluid dynamics commerical code of ANSYS fluent has been used to simulate mixing process at Schmidt number of 752.26 for Reynolds number in range of 1 to 200. For double T-micromixer and multiple T-micromixers two and three different types of placement for two fluids in the inputs respectively investigated and results has been compared. Cortes-Quiroz et al study used for validation present investigation. Mixing results compared for specific flow types in double and multiple micromixers with single flow type in T-micromixer. The results show mixing index and pressure drop are function of inputs’ number and position also for geometries with more than two inputs, types of input fluids have effect on these parameters.The value of 0.4878 is the maximum mixing index has been observed using flow type 1 in Multiple T-micromixer at the Reynolds number of 1.}, keywords = {Numerical study,Double T-micromixers,Multiple T-micromixers,non-aligned,Pressure drop}, title_fa = {بررسی عددی اختلاط درمیکرومیکسرهای Tشکل دوگانه و چندگانه با ورودی های همراستا و ناهمراستا}, abstract_fa = {در این پژوهش عددی ، رفتار اختلاط دو سیال آب و اتانول با چگالی و لزجت متفاوت در پنج گونه T میکرومیکسر مطالعه شده است. هندسه‌های پژوهش شامل هندسه‌های 1 و 2 که به ترتیب Tمیکرومیکسرهای چندگانه با ورودی‌های ناهمراستا در یک و دو صفحه و هندسه‌های 3 ،4 و 5 به ترتیبT میکرومیکسر چندگانه ، T میکرومیکسر دوگانه وT میکرومیکسر می‌شوند. کد تجاری دینامیک سیالات محاسباتی انسیس فلوئنت به منظور شبیه‌سازی فرآیند اختلاط، در عدد اشمیت 752/26 و در محدوده‌ی اعداد رینولدز 1 تا 200 استفاده شده است. در میکرومیکسرهای دوگانه و چندگانه به ترتیب دو و سه نوع ترتیب قرارگیری برای دو سیال در ورودی‌ها بررسی و نتایج مقایسه شده است. اعتبارسنجی پژوهش حاضر با مطالعه کورتس کی روش و همکاران انجام شده است.نتایج اختلاط به ازای انواع جریان خاص در میکرومیکسرهای چندگانه و دوگانه با تنها نوع جریان در T میکرومیکسر مقایسه شده است. نتایج بیانگر است که شاخص اختلاط و افت فشار علاوه بر تعداد ورودی‌های میکرومیکسر، تابع نحوه قرارگیری آنها و نیز به ازای هندسه‌های دارای بیش از دو ورودی تابع ترتیب قرارگیری دو سیال در ورودی‌ها است. مقدار 0/4878 حداکثر شاخص اختلاط به ازای جریان نوع 1 و عدد رینولدز 1 در Tمیکرومیکسر چندگانه مشاهده شده است.}, keywords_fa = {بررسی عددی,Tمیکرومیکسرهای دوگانه و چندگانه,شاخص اختلاط,ناهمراستا,افت فشار}, url = {https://mej.aut.ac.ir/article_3334.html}, eprint = {https://mej.aut.ac.ir/article_3334_b7c15e3a8f02fb1899022d7895de54ae.pdf} }