@article { author = {Mansouri, Nematollah and Moghimi, Mahdi}, title = {Investigate of Hydrodynamic and Mass Transfer in the Spacer-Filled Channel of Reverse Osmosis Module}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {53}, number = {شماره 1 (Special Issue)}, pages = {393-410}, year = {2021}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2020.15917.6238}, abstract = {The feed channel spacers cause the membrane plates to be separated. These mesh spacers increase the pressure drop in the channel and, in contrast, improve the mass transfer process. In this study, investigate hydrodynamics and mass transfer in the spacer-filled channel in the reverse osmosis module by using the simulation of computational fluid dynamics coupled with the response surface method. Input parameters include the average inlet velocity, the attack angle, the mesh angle, and the output parameters include the pressure drop over the computational domain and the water flux across the membrane walls. The Latin hypercube sampling design method was used to sample the input parameters and the Kriging model has been used for the response surface model. Also, genetic algorithms and screening were used to determine the optimal output parameters. The sensitivity analysis of the input parameters on the output parameters indicates that the average inlet velocity and the attack angle are the most and the least influential parameters, respectively. The optimum configuration geometry taking the values of both output parameters (pressure drop and water flux) into account was stood up at the attack angle of 72.74 degrees, the mesh angle of 85.19 degrees, and the inlet velocity of 0.13 m/s.}, keywords = {Reverse osmosis,Feed spacers,optimization,Hydrodynamics,Mass Transfer}, title_fa = {تحلیل هیدرودینامیک و انتقال جرم در کانال تغذیه پرشده با جداکننده ماژول اسمزمعکوس}, abstract_fa = {جداکننده‌های کانال تغذیه باعث افزایش انتقال جرم و در نتیجه افزایش شار نفوذ حلال از دیواره غشا می‌گردند؛ اما از سوی مقابل باعث افزایش افت فشار در سیستم می‌شود. در این مطالعه هیدرودینامیک و انتقال جرم در یک کانال تغذیه پرشده با جداکننده در ماژول اسمزمعکوس بررسی شده است. به این منظور از شبیه‌سازی دینامیک سیالات محاسباتی همراه با روش سطح پاسخ استفاده شده است. پارامترهای ورودی شامل متوسط سرعت ورودی جریان، زاویه حمله و زاویه بین‌رشته‌ای و پارامترهای خروجی شامل افت فشار در طول کانال و شار نفوذ آب از دیواره غشا می‌باشد. از فرآیند طراحی آزمایش‌ها و روش طراحی مکعب چندبعدی لاتین برای نمونه‌برداری و از مدل کریگینگ برای فرآیند پاسخ سطحی استفاده گردید. همچنین از الگوریتم ژنتیک و روش غربالگری برای پیدا کردن نقاط بهینه استفاده شد. نتایج آنالیز حساسیت پارامترهای ورودی بر روی افت فشار و شار نفوذ آب نشان می‌دهد که سرعت ورودی تاثیرگذارترین پارامتر و زاویه حمله کمترین میزان تأثیرگذاری را دارا می‌باشد. هندسه بهینه با در نظر گرفتن مقادیر هر دو پارامتر خروجی (ساختار هندسی که منتج به کمترین میزان افت فشار و بیشترین مقدار شار نفوذ می‌گردد) به‌صورت زاویه حمله 74/72 درجه، زاویه بین‌رشته‌ای 19/85 درجه و متوسط سرعت ورودی 13/0 می‌باشد.}, keywords_fa = {اسمزمعکوس,جداکننده کانال تغذیه,بهینه‌سازی,هیدرودینامیک جریان,انتقال جرم}, url = {https://mej.aut.ac.ir/article_3761.html}, eprint = {https://mej.aut.ac.ir/article_3761_b24dd6cf1b767170cfab4cf87e15b637.pdf} }