@article { author = {Shafiei Alavijeh, Mohammad and torabian, hosein and Amirabadi, Hosein}, title = {Obtaining the equations to predict values of springback and side-wall curl radius of U-bending of DP600 dual-phase steel plates}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {47}, number = {2}, pages = {35-44}, year = {2016}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.378}, abstract = {The most prominent feature of sheet material forming process is an elastic recovery phenomenon during unloading which leads to springback and side wall curl. Therefore, evaluation of springback and side wall curl is mandatory for production of precise products. In this research , the effects of friction coefficient, sheet thickness, yield strength of sheet and blank holder force on the springback and side wall curl in U bending of DP600 dual phase steel sheets were investigated. These investigations were done by computer simulation. The simulations were done by ABAQUS finite element software and then, results were compared with experimental results. The finite element results have been validated with experimental results. MINITAB, a statistical software, was used to analyze finite element results. With the use of MINITAB, equations were obtained to predict springback and side wall curl radius by friction coefficient , sheet thickness , yield strength and blank holder force.}, keywords = {Forming,U Shape,springback,Side Wall Curl Radius,Dual phase steel}, title_fa = {بدست آوردن روابطی برای پیش بینی مقادیر بازگشت فنری و شعاع انحنای دیواره در خمکاری U شکل ورق هایی از جنس فولاد دو فازی DP600}, abstract_fa = {مهمترین محدودیت در شکل دهی مطلوب ورق های فلزی، پدیده بازیابی کشسان در طول باربرداری است که منجر به بازگشت فنری و انحنای دیواره جانبی می گردد. بنابراین پیش بینی بازگشت فنری و انحنای دیواره جانبی برای تولید محصولات دقیق ضروری است. در این تحقیق، اثر نیروی ورقگیر، ضریب اصطکاک، ضخامت ورق و استحکام تسلیم ورق بر میزان بازگشت فنری و انحنای دیواره جانبی در فرایند خمکاری U شکل ورق هایی از جنس فولاد دو فازی DP600 مورد بررسی قرار گرفته است. جهت بررسی این عوامل از نرم افزار اجزای محدود آباکوس استفاده شده و نتایج حاصل از این نرم افزار با نتایج آزمایش های عملی مورد مقایسه قرار گرفته اند. نتایج بدست آمده از آزمایش های عملی، نتایج حاصل از شبیه سازی را تصدیق می کنند. در نهایت با استفاده از نرم افزار آماری مینی تب، نتایج شبیه سازی اجزای محدود تجزیه و تحلیل شده و معادلاتی برای پیش بینی مقادیر بازگشت فنری و شعاع انحنای دیواره جانبی با استفاده از مقادیر ضریب اصطکاک، نیروی ورقگیر، ضخامت و استحکام تسلیم ورق بدست آورده شده است.}, keywords_fa = {شکل دهی,U شکل,برگشت فنری,شعاع انحنای دیواره جانبی,فولاد دو فازی}, url = {https://mej.aut.ac.ir/article_378.html}, eprint = {https://mej.aut.ac.ir/article_378_2c959d0f333a6b1a7e2208d9efbb467b.pdf} }