@article { author = {jafari Nodoshan, Reza and Farzin, Mahmood}, title = {Effects of Pre-Form Thickness Variations on Product Thickness Accuracy in Multi-Rollers Flow-Forming}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {44}, number = {2}, pages = {103-112}, year = {2013}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2013.39}, abstract = {An advantage of the flow-forming process is high accuracy of products. Most researches in the past decades studied product diametric accuracy but to the authors’ knowledge, they investigated rarely thickness accuracy. In this paper, a procedure is proposed to predict effects of the process parameters such as pre-form thickness variation and mandrel and rollers stiffness on product thickness accuracy. For this purpose, rollers forces are calculated as a function of pre-form thickness variation and mandrel and rollers deflections. Using this function, product thickness variation and mandrel deflection are calculated and it is concluded that pre-form thickness variation causes product thickness variation with similar distribution but the amount of variation largely decreases. The experiments also verify this prediction. In addition, the applied force to the mandrel is investigated and it is also concluded that a periodic force with similar distribution to the pre-form thickness is applied to the mandrel. Finally, it is shown that flow-forming with three rollers produce more accurate products than a two rollers case.}, keywords = {flow-forming,product accuracy,pre-form thickness variation,mandrel and roller deflection}, title_fa = {تاثیر تغییرات ضخامت پیش تولید بر ضخامت قطعات نهایی در فلوفرمینگ با چند غلتک}, abstract_fa = {از مزایای فرایند فلوفرمینگ دقت بالای محصولات تولید شده با این نوع فرایند است. بیش­تر تحقیقات گذشته به بررسی دقت در قطر داخلی محصول در این فرایند پرداخته­اند و در زمینه دقت در ضخامت محصول تحقیقات چندانی انجام نشده است. در این مقاله روشی ارائه شده است که با آن می­توان تاثیر عواملی مانند ضخامت پیش­تولید را در دقت ضخامت محصول بررسی نمود. در این راستا نیروی غلتک­ها به صورت توابعی از تغییر ضخامت پیش­تولید و خیز مندرل و غلتک شده­اند. با استفاده از این توابع، خیز مندرل و ضخامت نهایی قطعه در محیط آن محاسبه شده و نشان داده شده است که تغییرات ضخامت در پیش­تولید باعث تغییرات ضخامت با همان توزیع در قطعه نهایی می­شود ولی دامنه تغییرات ضخامت کاهش می­یابد. در این مورد نتایج تجربی نیز بررسی شدند که نتایج مشابهی را ارائه می­دهند. همچنین نیروهای اعمالی به مندرل با تغییر ضخامت پیش­تولید بررسی شده و نشان داده شده است که به مندرل نیروهای متناوبی مشابه توزیع ضخامت در پیش­تولید وارد می­شود. همچنین نشان داده شده است که فلوفرمینگ با سه غلتک نسبت به فلوفرمینگ با دو غلتک، محصولی با ضخامت یکنواخت­تر تولید می­نماید.}, keywords_fa = {فلوفرمینگ,دقت محصول,تغییرات ضخامت پیش‌تولید,خیز مندرل و غلتک}, url = {https://mej.aut.ac.ir/article_39.html}, eprint = {https://mej.aut.ac.ir/article_39_0e30f00db115cafedf334c6f426cfa5d.pdf} }