@article { author = {Mehmannavaz, Hossein and Ramezani, Ali and Liaghat, gholamhossain and fazeli, hamid and Rouhbakhsh, Mohsen and Nabakhteh, Mohammad Amin}, title = {Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {53}, number = {شماره 6 (Special Issue)}, pages = {3953-3970}, year = {2021}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2020.18593.6857}, abstract = {Discrete concrete targets show more resistance to penetration against shaped charges. The purpose of this study is to simulate the penetration of shaped charge in discrete concrete targets using LS-DYNA and ANSYS-AUTODYN and compare the results. For this purpose, the simulation process for one of the experimental results is performed and the results obtained from both software are validated. Finally, the results of two software in the fields of jet velocity, penetration depth, entry diameters, middle and exit crater, and run time are compared. Application of the ALE method for jet elements and the RHT concrete model to simulate the concrete behavior at high strain rates yielded good results. Differences in numerical solution method and command differences in the interaction of the Lagrangian and Eulerian elements in two software caused the depth of penetration in ANSYS-AUTODYN to be less than the LS-DYNA and the diameters of entry, middle and exit crater in ANSYS-AUTODYN become larger than the LS-DYNA and closer to the experimental results. The results of the two software are in good agreement with the experimental results. Continuous concrete was also simulated and it was found that the penetration depth of discrete concrete was lower than continuous concrete. }, keywords = {Shaped Charge,Discrete Concrete Targets,Numerical Analysis,LS-DYNA,ANSYS-AUTODYN}, title_fa = {تحلیل عددی نفوذ خرج گود در اهداف بتنی گسسته با استفاده از نرم‌افزارهای ال اس داینا و انسیس-اتوداین}, abstract_fa = {یکی از روش‌های ایمن‌سازی اهداف بتنی در برابر تهدیدهای خرج گود، گسسته‌سازی آن‌ها است. هدف از این پژوهش شبیه‌سازی فرآیند نفوذ خرج گود در اهداف بتنی گسسته، در دو نرم‌افزار ال‌اس‌داینا و انسیس-اتوداین است. بدین منظور، فرآیند شبیه‌سازی برای یکی از نتایج تجربی موجود، انجام شده و نتایج بدست‌آمده در هر دو نرم‌افزار، صحت‌سنجی شده‌اند. در انتها نتایج دو نرم‌افزار در زمینه‌های سرعت جت، عمق نفوذ، قطر دهانه ورودی، میانی، خروجی و زمان اجرا مقایسه شده‌است. استفاده از روش آ-ال-ای برای فرآیند شکل‌گیری جت، و مدل آر-اچ-تی برای شبیه‌سازی رفتار بتن در نرخ کرنش‌های بالا نتایج مناسبی در هر دو نرم‌افزار بدست داد. تفاوت‌های روش برهم‌کنش المان‌های لاگرانژی و اویلری در دو نرم‌افزار، باعث شد تا عمق نفوذ بدست‌آمده در انسیس-اتوداین، از ال‌اس‌داینا کمتر و قطر دهانه‌های ورودی، خروجی و میانی در انسیس-اتوداین نسبت به ال‌اس‌داینا بیشتر باشد. عمق نفوذ در ال‌اس‌داینا، و قطر دهانه‌های ورودی، خروجی و میانی در انسیس-اتوداین به نتایج تجربی نزدیک‌تر بودند. شبیه‌سازی بتن پیوسته نیز انجام شد و مشاهده گردید که عمق نفوذ خرج گود در بتن گسسته از بتن پیوسته کمتر است. نتایج بدست‌آمده نشان از تطابق خوب نتایج دو نرم‌افزار با مقادیر تجربی دارد.}, keywords_fa = {خرج گود,اهداف بتنی گسسته,تحلیل عددی,نرم‌افزار الاسداینا,نرم‌افزار انسیس-اتوداین}, url = {https://mej.aut.ac.ir/article_4197.html}, eprint = {https://mej.aut.ac.ir/article_4197_570d5f03b350411df1eb7a95f4c38241.pdf} }