@article { author = {Ghanbari, Roya and Heyhat, Mohammad Mahdi}, title = {Experimental Study of the Effect of Magnesium Oxide and Multi-Walled Carbon Nanotubes Hybrid Nanofluid on Increasing the Absorption Efficiency of Solar Radiation}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {54}, number = {5}, pages = {1101-1124}, year = {2022}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2022.20703.7297}, abstract = {The solar radiation absorption efficiency is one of the challenges for engineers in solar energy systems. Using the hybrid nanofluids, which are obtained by dispersing two or more types of nanoparticles in the base fluid, can be effective in better absorption of solar energy. In this study, the effect of type, concentration, and mixing percentage of nanoparticles on optical properties and solar thermal utilization efficiency has been tested. First, magnesium oxide nanofluids and multi-walled carbon nanotubes with water-based fluid were fabricated by a two-step method in volumetric concentrations of 0/01%%Vol, 0.02% Vol, and 0.04%Vol, and then the optical properties of single and hybrid forms were measured by spectrophotometer and have been compared by existing relations. Then, to obtain the solar thermal utilization efficiency, a solar simulator has been used. The results show that increasing the concentration of nanofluid, improves the optical properties and solar radiation absorption efficiency. Magnesium oxide nanofluid, multi-walled carbon nanotubes, and hybrid nanofluid have the values of extinction coefficient about 38, 40, and 50 times higher than pure water, respectively. The hybrid nanofluid absorbs more than 90% of the sun's energy at the highest concentration (0.04% Vol) and at a penetration depth of 0.3 cm. Solar energy absorption increases by increasing the concentration, hybridizing the nanofluid, and increasing the penetration distance.}, keywords = {Hybrid nanofluid,Magnesium oxide,Carbon Nanotube,Optical properties,Solar-thermal utilization efficiency}, title_fa = {بررسی تجربی تأثیر نانوسیال هیبریدی اکسید منیزیم و نانولوله‌های کربنی چندجداره بر افزایش بازده جذب انرژی تابشی خورشید}, abstract_fa = {بازده جذب انرژی تابشی خورشید یکی از چالش‌های مهندسان در سامانه‌های خورشیدی است. استفاده از نانوسیال‌های هیبریدی که از پراکنده‌سازی دو یا چند نوع نانوذره در سیال پایه حاصل می‌شود، می‌توانند در جذب بهتر انرژی خورشیدی کارآمد باشند. در پژوهش حاضر، تأثیر نوع، غلظت و درصد اختلاط نانوذرات بر خواص تابشی و راندمان جذب انرژی تابشی خورشید بصورت تجربی مورد آزمایش قرار گرفته است. در ابتدا نانوسیال هیبریدی اکسید منیزیم و نانولوله کربنی چند جداره با سیال پایه آب به روش دومرحله‌ای در غلظت‌های حجمی 0/01%، 0/02% و 0/04% ساخته شده و سپس خواص تابشی نانوسیال‌ها بصورت تکی و هیبریدی توسط دستگاه اسپکتروفتومتر اندازه‌گیری شده و با روابط موجود مورد بررسی قرار گرفته است. در ادامه برای بدست آوردن راندمان جذب انرژی تابشی خورشید از دستگاه شبیه‌ساز خورشیدی استفاده شده است. نتایج نشان می‌دهد افزایش غلظت نانوسیال، سبب بهبود خواص تابشی و راندمان جذب تابش می‌شود. بهبود 38 برابری ضریب تخفیف نانوسیال اکسید منیزیم،40 برابری نانولوله کربنی چند جداره و حدود 50 برابری نانوسیال هیبریدی آن‌ها نسبت به سیال پایه بدست آمده است. نانوسیال هیبریدی در بالاترین غلظت آزمایش (0/04% حجمی) و در عمق نفوذ 0.3 سانتی‌متر بیش از 90% انرژی خورشید را جذب می‌کند. با افزایش غلظت، هیبریدی‌شدن نانوسیال و افزایش عمق نفوذ، جذب انرژی خورشیدی نیز افزایش می‌یابد.}, keywords_fa = {نانوسیال هیبریدی,اکسید منیزیم,نانولوله کربنی,خواص تابشی,راندمان جذب انرژی خورشیدی}, url = {https://mej.aut.ac.ir/article_4720.html}, eprint = {https://mej.aut.ac.ir/article_4720_2e425d4ac80b2a3d9b390733452ed476.pdf} }