@article { author = {Fakoor, Mahdi and MEHRE, NABI}, title = {Simulation of Orthotropic Damaged Zone Behavior Using Viscoelastic Models}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {48}, number = {4}, pages = {401-410}, year = {2016}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.554}, abstract = {In Fracture phenomenon of orthotropic materials, generally in crack tip vicinity, an area called damaged zone appears that in quasi-brittle materials, is known as fracture process zone. This area contains a multitude of micro cracks which due to various reasons, failure analysis and fracture process of these materials has been difficult. Determination of Mechanical properties in this region can help to predict the value or even the direction of crack growth in orthotropic materials. So far, several models have been proposed to determine the mechanical properties of this region, but due to the immense complexity of this region, the results have not been expressed the behavior of this region properly. Moreover, the existence methods have not been verified with new experimental and numerical data, yet. the present paper, it was attempted to present a new numerical model based on viscoelastic theory (the linear springs and damping) and, according to Perony series, the mechanical properties of the damaged zone simulated. In new approach, that is based on experimenal and FEM results, the mechanical behavior of damaged zone can accurately simulated.}, keywords = {Mechanical Properties,damaged zone,orthotropic materials,micro crack,Viscoelastic}, title_fa = {شبیه‎سازی رفتار ناحیه آسیب نوک ترک مواد اورتوتروپیک با استفاده از مدل ویسکو‎الاستیک}, abstract_fa = {در فرآیند شکست قطعات اورتوتروپیک، عموماً در نواحی اطراف نوک ترک، ناحیه ای تحت عنوان ناحیه آسیب پدید می آید که این ناحیه در مواد شبه شکننده به ناحیه فرآوری شکست معروف است. این ناحیه شامل انبوهی از میکروترک‎ها است که به دلایل متعدد، تحلیل و بررسی فرآیند شکست در این‎گونه مواد را دشوار کرده‎ است. تعیین خواص مکانیکی این ناحیه، می‎تواند به پیش بینی میزان و یا حتی جهت رشد ترک موجود در قطعات اورتوتروپیک کمک کند. تاکنون مدل‎هایی به ‌منظور تعیین خواص مکانیکی این ناحیه ارائه‌شده است اما به دلیل پیچیدگی‌های بسیار زیاد این ناحیه، نتایج حاصله به‌ درستی مبین رفتار این ناحیه نبوده است. ضمناً مدل‎های موجود با روش‌های تجربی و عددی مقایسه و صحت‎سنجی نشده است. دراین مقاله، سعی بر آن است تا با ارائه یک مدل عددی جدید بر اساس تئوری ویسکوالاستیک و با استناد به سری‎های پرونی، خواص مکانیکی ناحیه آسیب شبیه‎سازی شود. این روش جدید که بر مبنای نتایج المان محدود و تجربی است، می‌تواند رفتار ناحیه آسیب را با دقت مناسبی تخمین بزند.}, keywords_fa = {خواص مکانیکی,ناحیه آسیب,میکروترک,ویسکوالاستیک}, url = {https://mej.aut.ac.ir/article_554.html}, eprint = {https://mej.aut.ac.ir/article_554_a4d04b336bd60ae18542b09cb755711f.pdf} }