@article { author = {Borji, M. and Ghorbani, S. and Atashkari, K. and Etemadi, A.}, title = {Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {49}, number = {1}, pages = {219-230}, year = {2017}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.669}, abstract = {Current study aims to numerically investigate the steady state performance of integrated cycle consisting of biomass gasification process and planar type solid oxide fuel cell for different biomass moisture content and amount of air as gasification agent in the gasifier. Single stage lumped gasifier is analyzed by use of a modified thermodynamic equilibrium model, while the steady-state intermediate temperature solid oxide fuel cell model developed hear is one-dimensional which allows for monitoring of the temperature gradients along the cell length under different operating conditions. Complete electrochemical model, species mass balances and energy conservation equation beside the kinetics describing internal methane steam reforming and water-gas shift reactions organize the structure of fuel cell model. Developed model for two main parts of the integrated cycle are validated against the available experimental and numerical dates. Results indicated that the low heating value of the product syngas with 30% moisture content decreases with decreasing of the modified equivalence ratio and increasing of the biomass moisture content from 10 to 50%. Based on the obtained results, the cell electric power mitigates by increasing of the biomass moisture content.}, keywords = {Solid oxide fuel cell,Gasification,Biomass,Biogas}, title_fa = {مطالعه‌ی عددی سیکل یکپارچه‌ی تولید گاز از زیست توده و پیل سوختی اکسید جامد صفحه‌ای}, abstract_fa = {در پژوهش حاضر، عملکرد پایای سیستم یکپارچه‌ی متشکل از فرایند گازی‌سازی زیست‌توده و پیل سوختی اکسید جامد صفحه‌ای به ازای مقادیر مختلف رطوبت زیست‌توده‌ و مقدار هوای ورودی عامل گازی‌سازی در راکتور مولد گاز به صورت عددی مورد مطالعه قرار می‌گیرد. فرآیند تولید گاز در قالب یک راکتور تک‌مرحله‌ای با استفاده از روش ترمودینامیکی تعادلی اصلاح‌شده مدل می‌شود. مدل ارائه شده در بخش پیل سوختی، مدلی یک‌بعدی با امکان کنترل دما در راستای محور پیل سوختی می‌باشد. مدل کامل الکتروشیمیایی در کنار معادلات بقای جرم اجزای گازی و انرژی شاکلۀ اصلی مدل پیل سوختی را تشکیل می‌دهند. همچنین دو واکنش اصلاح متان به کمک بخارآب و تبدیل آب- گاز منابع تولید و مصرف اجزای گازی را در کانال سوخت تشکیل خواهندداد. مدل دو بخش اصلی سیستم به کمک نتایج آزمایشگاهی و عددی در دسترس ارزیابی شده و سپس اثر پارامترهای یادشده بر عملکرد سیستم یکپارچه تحلیل و تشریح می‌شوند. نتایج نشان می‌دهند که ارزش حرارتی پایینی بیوگاز تولیدی از هر کیلومول چوب با محتوی رطوبت 3/0، با کاهش نسبت هوای معادل و افزایش محتوی رطوبت از 1/0 تا 5/0 کاهش می‌یابد. طبق نتایج، افزایش محتوی رطوبت زیست‌توده، توان تولیدی تک‌سلول پیل سوختی اکسید جامد صفحه‌ای را کاهش خواهدداد.}, keywords_fa = {پیل سوختی اکسید جامد,گازی‌سازی,زیست‌توده,بیوگاز}, url = {https://mej.aut.ac.ir/article_669.html}, eprint = {https://mej.aut.ac.ir/article_669_56fe04d65958a6de8b4b592262d6b2ad.pdf} }