@article { author = {Akbari, M. and Mortazavi, S.S. and Shahin Varnoosfaderani, H.}, title = {Three Dimensional Numerical Simulation of a Drop and Drop-to-Wall Interaction under Uniform Electric Field}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {4}, pages = {755-766}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.750}, abstract = {The behavior of a drop and drop-to-wall interaction under a uniform electric field is studied by numerical simulations in three dimensions. The electric field is created by imposing an electric-potential difference. The Taylor Leaky Dielectric Model, is used to compute electric force. This force is added to Navier-Stokes equations as a body force. The drop can obtain an Oblate shape (deformation perpendicular to direction of electric field) or a Prolate shape (deformation in the direction of electric field) depending on the electric properties of drop and ambient fluid. It found that the deformation of the drop is in agreement with experimental results finding in literature. The interaction of the drop with the existing walls of the channel is investigated for both Oblate and Prolate drops. This is done at various capillary numbers. Attraction of both Oblate and Prolate drops to the wall, are the results. Increasing the electric capillary number reduces the time of attraction for both drops. For Oblate and Prolate drops with similar flows, higher electric capillary number causes distortion of drop surface near the wall. For another type of Prolate drops, increasing the electric capillary number eventuates to more distance between drop center and the wall.}, keywords = {Front-tracking method,Electric Capillary Number,Ohnesorge Number,Oblate/Prolate Deformation,Electric conductivity/permittivity ratio}, title_fa = {شبیه سازی عددی سه بعدی رفتار قطره و عکس العمل قطره و دیوار در میدان الکتریکی}, abstract_fa = {در این پژوهش، رفتار قطره و نیز عکس العمل قطره و دیوار در میدان الکتریکی یکنواخت خارجی به صورت کاملا سه بعدی شبیه سازی شده است. میدان الکتریکی با اعمال اختلاف پتانسیل ایجاد و سپس با استفاده از مدل نشت عایق تیلور، نیروی الکتریکی ناشی از این میدان، محاسبه و به معادلات نویر-استوکس اضافه شده است. این نیرو، بسته به خصوصیات الکتریکی قطره و سیال پیرامون، باعث تغییر شکل آن به صورت آبلیت )راستای عمود بر میدان الکتریکی( و یا پرولیت )در راستای میدان الکتریکی( و همچنین ایجاد جریان های القایی داخل و خارج قطره می‌شود. ابتدا تغییر شکل یک قطره‌ی تنها در میدان الکتریکی شبیه سازی و نتیجه با نتایج تجربی موجود، مقایسه و صحت سنجی شده است. سپس رفتار قطره در میدان الکتریکی از نظر نوع تغییر شکل و نوع جریان‌های القایی بررسی شده است. عکس العمل قطره و دیوار، برای قطره‌های آبلیت و پرولیت مورد بررسی قرار گرفته است. اثر عدد مویینگی الکتریکی بر چگونگی عکس العمل قطره و دیوار و نیز حالت نهایی آنها، مطالعه شده است. هم قطرات آبلیت و هم پرولیت به دیوار جذب می‌شوند. افزایش عدد مویینگی الکتریکی این اثر را تقویت می‌کند و تحت شرایطی می‌تواند باعث اعوجاج سطوح قطرات نیز بشود.}, keywords_fa = {روش پیشروی جبهه,عدد مویینگی الکتریکی,عدد اونسرج,نسبت هدایت‌پذیری/نفوذپذیری الکتریکی,تغییر شکل آبلیت/پرولیت}, url = {https://mej.aut.ac.ir/article_750.html}, eprint = {https://mej.aut.ac.ir/article_750_a657fa3dee3dba5d97cd980507bca29f.pdf} }