@article { author = {Rosta Abkenar, A. and امانی فرد, نیما and Mohhades Deylami, H. and Dolati, F.}, title = {Experimental Investigation of Flow and Heat Transfer in a Smooth Channel Affected by Vortex Generator with a Punched Hole}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {2}, pages = {271-284}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.770}, abstract = {Heat transfer and hydraulic performance for flow in a rectangular channel with LVGs (longitudinal vortex generators) are experimentally investigated using the different shape of LVGs. Firstly, a precise and reliable experimental setup was designed and fabricated to generate a constant heat flux boundary condition. In order to analyze the effect of shaped LVGs, three different of the rectangular, trapezoidal and delta winglet pair vortex generators with and without punched holes on the flow field and heat transfer characteristics at the different attack angle of 15º, 30º, 45º and 60º with a small thickness has been studied. Effects of the number of punched holes were evaluated by using dimensionless numbers, friction coefficient ratio (f/f0), Nusselt number ratio (Nu/Nu0) and overall performance ((Nu/Nu0)/(f/f0)). According to the experimental results, the rectangular winglet pair without punched holes vortex generator has the highest values of friction factor ratio and increased with bigger attack angle. The friction factor decreased and heat transfer and also overall performance increased with implementing of perforated rectangular, trapezoidal and delta winglet pair in the channel but in the case of implementing trapezoidal vortex generator with two punched holes heat transfer is a little more than the vortex generator with three punched holes.}, keywords = {Heat transfer enhancement,Vortex generator,Smooth channel,Experimental investigation}, title_fa = {تحلیل تجربی میدان جریان و انتقال حرارت در یک کانال مسطح تحت تاثیر مولد گردابه سوراخ‌دار}, abstract_fa = {انتقال حرارت و عملکرد هیدرودینامیکی برای جریان در داخل کانال مستطیلی در حضور مولد گردابه به صورت تجربی با استفاده از شکل های مختلف مولد گردابه مورد مطالعه قرار گرفته است. در ابتدا تجهیزات آزمایشگاهی دقیق و مطمئن به منظور ایجاد شرایط مرزی شار حرارتی ثابت طراحی و ساخته شده است. به منظور بررسی تاثیر شکل مولد گردابه طولی، از سه نوع جفت مولد گردابه مستطیلی، ذوزنقه­ای و مثلثی در شرایط سوراخدار و بدون سوراخ استفاده شده و تاثیر آنها بر مشخصات جریان سیال و انتقال حرارت در زوایای حمله مختلف 15 ، 30 ، 45 و 60 درجه با ضخامت ناچیز مورد مطالعه قرار گرفته است.اثرات تعداد سوراخ با استفاده از پارامترهای بی بعد نسبت ضریب اصطکاک ( f/f0)، نسبت عدد ناسلت (Nu/Nu0) و عملکرد کلی ((Nu/Nu0) /( f/f0  )) مورد ارزیابی قرار گرفته است. بر طبق نتایج تجربی جفت بالچه مولد گردابه مستطیلی بدون سوراخ بیشترین نسبت ضریب اصطکاک را دارد و با افزایش زاویه حمله این نسبت افزایش می یابد. نتایج نشان می­دهد که با ایجاد سوراخ در جفت بالچه های مولد گردابه مستطیلی، ذوزنق های و مثلثی ضریب اصطکاک کاهش و انتقال حرارت و ضریب عملکرد کلی افزایش یافته است. اما در حالت بکارگیری مولد گردابه ذوزنق های با دو سوراخ، انتقال حرارت کمی بیشتر نسبت به حالت مولد گردابه سه سوراخ افزایش یافته است.}, keywords_fa = {افزایش انتقال حرارت,مولد گردابه,کانال مسطح,تحلیل تجربی}, url = {https://mej.aut.ac.ir/article_770.html}, eprint = {https://mej.aut.ac.ir/article_770_4a8caacbd97869ab51ad08573fe60123.pdf} }