@article { author = {Amini, S. and آقایی, محسن}, title = {Study the Fatigue Behavior of AISI 1045 Steel Using Ultrasonic Fatigue Test Machine}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {51}, number = {5}, pages = {1017-1024}, year = {2019}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.787}, abstract = {Fatigue is essential in the use of metals in view of the progress made. In the last two decades, a new branch in the life cycle of fatigue called very high cycle fatigue has received much attention from researchers, with access to this number of cycles (107 and above) in practice using modern test devices due to its low frequencies. are time consuming and costly. On the other hand, for many materials, fatigue failure after 107 cycles has been reported. Investigating fatigue properties over a very long cycle is a significant issue in ensuring the longevity and reliability of machinery in light of growing industrial demands. To achieve such a number of cycles, a fatigue test machine with a working frequency of about 20,000 Hz is used, which due to its high frequency, time reduction and achieving high cycle is an advantage of this machine. Therefore, in this article, as a new work in the iran, we design and manufacture an ultrasonic device and then study the fatigue behavior of steel specimens}, keywords = {Fatigue,Very high cycle,Piezoelectric,Ultrasonic,AISI 1045 steel}, title_fa = {مطالعه رفتار خستگی فولاد آ.آی.اِس.آی 1045 با استفاده از دستگاه آزمایش خستگی فراصوتی}, abstract_fa = {در استفاده از فلزات با توجه به پیشرفت‌های صورت گرفته، توجه به مساله خستگی امری ضروری می‌باشد. در دو دهه اخیر شاخه جدیدی در عمر خستگی به نام خستگی در چرخه خیلی زیاد مورد توجه محققان قرار گرفته است که دسترسی به( 107 به بالا) در عمل با استفاده از دستگاه‌های آزمایش امروزی به دلیل فرکانس‌های پایین آنها زمان‌بر و پر این تعداد چرخه ) 107 چرخه گزارش شده است. بررسی خواص خستگی هزینه می‌باشد. از طرفی برای بسیاری از مواد، شکست خستگی بعد از در چرخه خیلی زیاد، مساله ای قابل توجه برای حصول اطمینان از عمر زیاد و قابل اطمینان ماشین آلات با توجه به مطالبات رو به رشد صنعتی می‌باشد. برای دستیابی به این تعداد چرخه از دستگاه آزمایش تست خستگی با فرکانس کاری در حدود 20000 هرتز استفاده می‌شود که با توجه به فرکانس بالا، کاهش زمان و دستیابی به چرخه های بالا از مزیای این دستگاه می‌باشد. لذا در این مقاله به عنوان کاری جدید در کشور، به طراحی و ساخت دستگاهی با روش فرا صوتی و سپس مطالعه رفتار خستگی نمونه‌های فولادی پرداخته می‌شود.}, keywords_fa = {خستگی,چرخه بسیار بالا,پیزوالکتریک,مافوق صوت,فولاد آ.آی.اِس.آی}, url = {https://mej.aut.ac.ir/article_787.html}, eprint = {https://mej.aut.ac.ir/article_787_ab9c47faba0b83329e7411b8d78a6323.pdf} }