@article { author = {Abbasi, Zahra and Liyaghat, Gholamhosein and Feli, Saeid}, title = {Deformation of Blunt Projectiles during Penetration into Deformable Medium Metallic Targets}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {42}, number = {1}, pages = {77-87}, year = {2010}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2010.81}, abstract = {In this paper, deformation of blunt projectiles is studied for normal penetration into a deformable medium metallic target, by using of plastic wave propagation in the projectile and plug. The new analytical approach presented in this investigation, is established based on the concept of the conservation energy across the plastic wavefront in the projectile and plug, during penetration process. This model assumes that the projectile and plate materials are rigid-linearly strain-hardening and rigid-perfectly plastic respectively. In this method, by merging the equation of energy equilibrium in the projectile and plug with the equation of mass conservation of the projectile, an equation is obtained that cross section of the deformed part of the projectile are calculated by solving it with numerical methods ,such as Muller method. The theoretical results have compared to the experimental ones and found to be in good agreement.}, keywords = {Penetration,Blunt projectile,Deformability,Medium targets,Plugging,Plastic stress wave}, title_fa = {تغییر شکل پرتابه های تخت حین فرایند برخورد و نفوذ به اهداف فلزی تغییر شکل پذیر نیمه ضخیم}, abstract_fa = {در این تحقیق، تغییرشکل پرتابه های تخت، حین نفوذ عمودی به یک هدف تغییر­شکل­پذیرنیمه ضخیم، با استفاده از انتشار امواج تنش پلاستیک در پرتابه و پلاگ، مدلسازی شده است. اساس مدل تحلیلی جدیدی که در تحقیق حاضر ارائه شده است، بر پایستگی انرژی در پیشانی موج تنش پلاستیک در پرتابه و پلاگ، حین فرایند برخورد و نفوذ استوار است. در این مدل، ماده پرتابه به صورت الاستیک با کار سختی خطی و ماده هدف به صورت صلب و تمام پلاستیک در نظر گرفته شده است. در این روش، با استخراج رابطه تعادل انرژی در پرتابه و پلاگ حاصل در هدف و ترکیب آن با معادله بقای جرم در پیشانی موج تنش پلاستیک در پرتابه، رابطه ای بدست می­آید که با حل آن به روشهای عددی نظیر روش مولر[i]می­توان سطح مقطع تغییرشکل یافته پرتابه را با داشتن برخی متغیر ها در هر لحظه محاسبه نمود. مقایسه نتایج تحلیلی با نتایج تجربی، برابری بسیار خوبی را نشان می­دهد.    1  Muller}, keywords_fa = {نفوذ,پرتابه تخت,تغییر‌شکل‌پذیری,اهداف نیمه ضخیم,پلاگینگ,امواج تنش پلاستیک}, url = {https://mej.aut.ac.ir/article_81.html}, eprint = {https://mej.aut.ac.ir/article_81_e686e098199bdb1abb262721fcaac02e.pdf} }