@article { author = {Kalteh, M. and Alipour Lalami, A.}, title = {Investigation of the Effect of Velocity Slip and Temperature Jump on the Heat Transfer of Nanofluid in a Microchannel Under Constant Heat Flux with Lattice Boltzmann Method}, journal = {Amirkabir Journal of Mechanical Engineering}, volume = {50}, number = {2}, pages = {255-270}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2008-6032}, eissn = {2476-3446}, doi = {10.22060/mej.2016.857}, abstract = {In this article, the effect of velocity slip and temperature jump on the flow and heat transfer characteristics of Al2O3 – Water nanofluid in a microchannel with insulated upper wall and constant heat flux on the lower one, is investigated using the lattice Boltzmann method. The problem is solved at Re equal to 5, for base fluid and nanofluid with 0.02 and 0.04 volume fractions, no-slip and slip conditions with 0.04 and 0.1 slip coefficients and also at 5 to 50 nm nanoparticle diameters. The results show that, in general, using the hydrophobic surfaces in addition to making a considerable reduction in wall shear stress, somewhat increases the heat transfer efficacy at uniform wall heat flux condition that can not be seen in the constant wall temperature situations. Also, it is shown that the effect of temperature jump on the average Nusselt number, is more for base fluid than the nanofluid and increases for higher slip coefficients. For nanofluid with 0.04 volume fraction, the average Nusselt number increases continuously with slip coefficient but, for base liquid, firstly it increases and then decreases.}, keywords = {Nanofluid,Microchannel,Temperature jump,Constant heat flux,Lattice Boltzmann method}, title_fa = {بررسی اثر لغزش سرعت و پرش دما بر انتقال حرارت نانوسیال در میکروکانالی تحت شار حرارتی ثابت با روش شبکه ی بولتزمن}, abstract_fa = {در این مقاله اثر لغزش سرعت و پرش دما بر مشخصه های جریان و انتقال حرارتی نانوسیال آب - آلومینا در یک میکروکانال دو بعدی که در صفحه پایین تحت شار حرارتی ثابت و در صفحه ی بالا عایق است، با روش شبکه ی بولتزمن مورد مطالعه قرار گرفته است. مساله مورد نظر در عدد رینولدز 5، برای سیال پایه و نانو سیال با کسر حجمی 02 / 0 و 04 / 0 در شرایط عدم لغزش و در ضرایب لغزش 04 / 0 و 1/ 0 و نیز در قطر های نانوذرات 5 تا 50 نانومتر بررسی شده است. نتایج نشان داد که به طور کلی استفاده از سطوح آبگریز ضمن کاهش محسوس تنش برشی دیواره، در شرایط شار حرارتی ثابت بر خلاف شرایط دما ثابت نه تنها باعث کاهش بازدهی انتقال حرارتی میکروکانال نمی شود، بلکه تا حدودی بازدهی آن را افزایش می دهد. همچنین مشخص شد که اثر پرش دمایی بر عدد ناسلت میانگین، در سیال پایه بیشتر از نانوسیال است و با افزایش ضریب لغزش بیشتر می شود. بطوریکه در نانو سیال با کسر حجمی 04 / 0، با افزایش ضریب لغزش بی بعد، عدد ناسلت میانگین به صورت پیوسته افزایش پیدا می کند ولی در سیال پایه این روند ابتدا صعودی و سپس نزولی است.}, keywords_fa = {نانوسیال,میکروکانال,پرش دما,شار حرارتی ثابت,روش شبکه ی بولتزمن}, url = {https://mej.aut.ac.ir/article_857.html}, eprint = {https://mej.aut.ac.ir/article_857_9688bff9ed2c122d6867cf8f6e25c367.pdf} }