<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی امیرکبیر</PublisherName>
				<JournalTitle>نشریه مهندسی مکانیک امیرکبیر</JournalTitle>
				<Issn>2008-6032</Issn>
				<Volume>52</Volume>
				<Issue>5</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>02</Month>
					<Day>17</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Failure Analysis of Glass Fiber Reinforced Plastic Pipes and Crack Inlet Opening  with J-Integral Criteria Under Internal Pressure</ArticleTitle>
<VernacularTitle>تحلیل شکست لوله‌های کامپوزیتی تقویت شده با الیاف شیشه و بازشدگی دهانه ترک با معیار انتگرال J تحت فشار داخلی</VernacularTitle>
			<FirstPage>1179</FirstPage>
			<LastPage>1192</LastPage>
			<ELocationID EIdType="pii">3304</ELocationID>
			
<ELocationID EIdType="doi">10.22060/mej.2019.14708.5947</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>امیر</FirstName>
					<LastName>خدابخشی</LastName>
<Affiliation>گروه مهندسی مکانیک، فنی، دانشگاه گیلان، رشت، ایران</Affiliation>
<Identifier Source="ORCID">0000-0003-3801-6350</Identifier>

</Author>
<Author>
					<FirstName>حسن</FirstName>
					<LastName>اسدی گیلاکجانی</LastName>
<Affiliation>دانشکده مهندسی مکانیک دانشگاه گیلان، رشت</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>08</Month>
					<Day>08</Day>
				</PubDate>
			</History>
		    <Abstract>Inspection of the damage caused by glass fiber reinforced plastic tubes, which are subjected to internal pressure due to different angles that can be exposed under the creep phenomenon in the long-term, has not been sufficiently considered. Therefore, in the present research, it has been tried to simulate the fracture by Tsai-Wu, Hashin criterions and the crack inlet opening with J-integral criterion in these pipes with different layering at internal pressure using finite element method and ABAQUS. The results of this research show that the fibers under compressive and tensile stress and the resin of tube have not fractured by tensile stress, but the fracture has occurred in the resin of composite tubes that were under pressure. According to the results, the fracture index is less than one for each of ten layers, when layering angle varies from 5 [(±30) ] to 5 [(±60) ] , but the fracture index is more than one, layering decoration for 5 [(±70) ] , 5 [(±80) ] and 5 [(±90) ] of composite tubes has been fractured. However, the value of the stress intensity factor was immediately decreased for layering decoration angle of 5 [(±55) ] , but this factor has improved when layering angle increased</Abstract>
			<OtherAbstract Language="FA">امروزه، با توجه به معایب گسترده‌ی لوله‌های فلزی نظیر خوردگی از داخل و خارج، عدم شکل‌پذیری آسان، رسوب‌پذیری زیاد بدلیل زبری زیاد جداره‌ی داخلی و جذب زیاد املاح، افت فشار بالا بدلیل ناصافی سطح داخلی، وزن زیاد و مشکلات نصب و عمر کم و ... استفاده‌ی روزافزون از لوله‌های پلیمری در حوزه‌ی وسیعی از خطوط لوله‌ی شهری، صنعتی، دریایی، حفاری و کشاورزی مورد توجه قرار گرفته است. بررسی میزان آسیب وارد بر لوله‌های کامپوزیتی تقویت شده با الیاف شیشه تحت زوایای مختلف در اثر فشار داخلی که در درازمدت در اثر پدیده‌ی خزش ممکن است دچار شکست شوند کمتر مورد توجه قرار گرفته است. از این‌رو، در تحقیق حاضر به شبیه‌سازی شکست با معیارهای تسای-وو و هاشین با روش اجزاء محدود و با استفاده از نرم‌افزار آباکوس و همچنین بازشدگی دهانه‌ی ترک در اثر فشار داخلی در این لوله‌ها با لایه‌چینی‌های مختلف با معیار انتگرال J پرداخته شده است. نتایج تحقیق حاضر نشان می‌دهد که زمینه‌ی لوله‌ی کامپوزیتی تحت کشش و الیاف این لوله که تحت فشار و کشش قرار دارند دچار شکست نشده اما زمینه‌ی لوله‌ی کامپوزیتی تحت فشار، دچار شکست شده است. با توجه به نتایج بدست آمده برای هر ده لایه در زوایا‌ی لایه‌چینی از [(30)]تا[(60)] میزان شاخص شکست کمتر از یک است اما، در آرایش‌های‌ لایه‌چینی ‌[(70)]، [(80)]و [(90)] مقدار این شاخص بیشتر از یک بوده در نتیجه، لوله‌ی کامپوزیتی دچار گسیختگی ‌شده است. همچنین، ضریب شدت تنش در زاویه‌ی لایه‌چینی [(55)] دچار افت ناگهانی شده اما با افزایش زاویه، مقدار این ضریب افزایش یافته است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">لولههای کامپوزیتی تقویت شده با الیاف شیشه</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">تحلیل شکست</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">روش اجزاء محدود</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">انتگرال J</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ضریب شدت تنش</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://mej.aut.ac.ir/article_3304_0e9d935f7e3f2b502450c049ddbc7c92.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
