Aalami, M.R. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
Abbasi, E. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
Abbasi, S. Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
Abbassi, A. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
Abbassi, A. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
Abdolahi, S. Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
Abdolahzade Gavgani, M. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
Abdolhoseini, M. J. Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
Abolmasoumi, A. H. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
Afshari, H. Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2018, Pages 759-772]
Aghaei, A. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
Ahmadi, S. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
Ahmadi Najafabadi, M. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
Akbari, M. H. Effects of Agglomerate Arrangement on Cathode Catalyst Layer Performance in PEM Fuel Cell [Volume 49, Issue 1, 2017, Pages 203-218]
Akhgari, R. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
Alamian, R. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
Alimirzaloo, V. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
Alinejad, G.M. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
Alizadeh, A.A. Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2018, Pages 731-742]
Allahyari, E. Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
Amanifard, N. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
Amarloo, A. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
Ameri, M. Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
Amoozgar, M. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
Ansari, M. Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
Ashrafizaadeh, M. Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
Atashkari, K. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
Azimi, A. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
Azimifar, M. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
B
Babazadeh Baie, N. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
Bahrami, S. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
Bakhshi, M. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
Bakhshi, M. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
Bak Khoshnevis, A. Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
Bak Khoshnevis, A. Experimental Study of Fluctuation, Parameters and High-Order values of velocity in wake Region of a Model car [Volume 49, Issue 1, 2017, Pages 83-92]
Barzanooni, V. Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
Barzanooni, V. Experimental Study of Fluctuation, Parameters and High-Order values of velocity in wake Region of a Model car [Volume 49, Issue 1, 2017, Pages 83-92]
Bazargan, M. Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
Beyranvand, M. A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2018, Pages 819-828]
Bidzard, A. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
Bordbari, H. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
Borji, M. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
Bozorg, M. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
C
Chakherlou, T.N. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
D
Dashti Rahmatabadi, A. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
Dehghan, A. A. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
Dehghan Manshadi, M. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
Dolati, S. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
Donyavi, A. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
Dorari, E. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
E
Eatemadi, F. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
Eftekhari, R. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
Esmailian, Ehsan Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
Etemadi, A. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
F
Fadaee, M. Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
Fallah, M. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
Fallahi Arezoodar, A. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
Farahinia, A. R. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
Fathi, M. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
Fathi, S. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
Firouzi, B. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
G
Ghadiri, M. Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2018, Pages 721-730]
Ghaffari, A. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
Ghahramani, N. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
Ghassemi, H. Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
Ghassemi, H. Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
Ghazanfarian, J. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
Ghodsbin Jahromi, A. Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2018, Pages 685-696]
Ghorbani, S. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
Ghoreishi, M. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
Gorji, A. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
Gorji, H. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
H
Hadad, K. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
Hadidoolabi, M. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
Haghighat, H. A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2018, Pages 819-828]
Haghparast, A. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
Hajhashemkhani, M. Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
HajiAliMohammadi, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
Hajidavalloo, E. Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
Haji ghafoori boukani, N. Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
Hashemabadi, M. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
Hashemi, S. A. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
Hashemzadeh, S.M. Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
Hatami, Hossein Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2018, Pages 685-696]
Heidary, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
Hematiyan, M.R. Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
Honarpisheh, M. Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
Hosseinalipoor, S. M. Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
Hosseini, S.M. A. Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
Hosseini Abadshapoori, M. Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
Hosseini Toudeshky, H. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
J
Jaamialahmadi, A. Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2018, Pages 829-838]
Jafari-Talookolaei, R.-A. Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2018, Pages 731-742]
Jahani, H. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
Jalili, M. M. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
Jamaati, J. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
Jamshideasli, D. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
K
Kalteh, M. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
Kamali Moghadam, R. Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
Kamalinia, A. H. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
Kariman, M. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
Kazemzadeh Hannani, S. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
Keshavarz, M. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
Khani, L. A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
Khatoonabadi, S. M. Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
Khazaee, A. M. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
Kheradmand, S. Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
Khodaparast, Sh. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
Khoddami, A.S. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
Khorram, A. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
Kolak, H. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
L
Laraibi, I. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
Loghman, A. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]
M
Mahdizade, E. Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
Mahmoodi, M. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
Mahmoudi, S. M. S. A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
Mahzoon, M. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
Maleki, H.N. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
Maleki Nejad, J. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
Mani, M. Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
Mansoori, Z. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
Mantashloo, R. Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2018, Pages 743-758]
Marzban Shirkharkolaee, E. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
Masoumi Dehaghi, E. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
Mehdizadeh, M. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
Mehrabi, M. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
Mesgarpoor Tousi, A. Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
Moayyedi, M. K. Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure [Volume 49, Issue 1, 2017, Pages 101-112]
Mohaddes Deylami, H. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
Mohammadi, A. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
Mohammadi, R. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
Mohammadi Hooyeh, H. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]
Mohammadimehr, m. Nonlinear Buckling Analysis of nonlocal Boron Nitride Timoshenko nano beam based on Modified couple stress theory using DQM [Volume 49, Issue 2, 2017, Pages 241-252]
Mohammadimehr, M. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
Mohammad Nabi, S. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
Mojra, A. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
Molaeimanesh, G. R. Effects of Agglomerate Arrangement on Cathode Catalyst Layer Performance in PEM Fuel Cell [Volume 49, Issue 1, 2017, Pages 203-218]
Mollamahdi, M. Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
Montazerin, N. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
Moravej Barzani, H. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
Moslemi Naeini, H. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
Movahedi, A. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
N
Nabavi, S. M. Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2018, Pages 665-672]
Najjarnezami, A. Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
Nassiri Toosi, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
Navabi Nezhad, S. Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2018, Pages 829-838]
Nazari, M. Critical Thickness of a Porous Layer with Respect to Porosity and Its Effect on Heat Transfer Rate [Volume 49, Issue 1, 2017, Pages 171-184]
Nazari, M. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
Nazemnezhad, R. Investigation of surface effects on free torsional vibration of nanobeams [Volume 49, Issue 2, 2017, Pages 309-316]
Niazmand, H. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
Nikbakht, A. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
Nima Shojaee, S. M. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
Nosratollahi, M. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
P
Parsa, H. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
Pirkandi, J. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
Pirkandi, J. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
Poolaei Moziraji, Z. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
R
Rabiee, A. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
Rahmati, A.R. Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
Rasi Marz-Abadi, F. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
Rasoolizadeh Shooroki, A. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
Razavi, S. Analytical investigation on free nonlinear vibration of thin rectangular magneto-electro elastic plate on an onlinear fundation [Volume 49, Issue 2, 2017, Pages 317-324]
S
Sadighi, M. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
Saeedifar, M. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
Saeidi, H. Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
Safari, M. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]
Safarpour, H. Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2018, Pages 721-730]
Safdarian, R. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
Saffar-Avval, M. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
Safizadeh, M.S. Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
Saidi, M. H. Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
Salmani Tehrani, M. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
Samarikhalaj, H. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
Sarhaddi, F. Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
Sattarifar, I. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
Sedighi, M. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
Shafaghat, R. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
Shahedi, s. Nonlinear Buckling Analysis of nonlocal Boron Nitride Timoshenko nano beam based on Modified couple stress theory using DQM [Volume 49, Issue 2, 2017, Pages 241-252]
Shahi Ashtiani, M.A. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
Shahmardan, M.M. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
Shahmohammadi, A. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
Shahverdi, H. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
Shakeri, M. Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
Shakeri, M. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
Sheikhan, S. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
Sheikhzadeh, Gh. A. Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
Shooshtari, A. Analytical investigation on free nonlinear vibration of thin rectangular magneto-electro elastic plate on an onlinear fundation [Volume 49, Issue 2, 2017, Pages 317-324]
Shooshtari, A. Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2018, Pages 743-758]
Siadaty, M. Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
Soleymani, M. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
T
Taghavi, R. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
Taghavi Zenouz, R. Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
Talebi, S. S. Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
Torabi, K. Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2018, Pages 759-772]
Tourajizadeh, H. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
V
Velayatimehr, S Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
Y
Yaghoubi, M. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
Yari, E. Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
Yousefi, A. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
Yousefi, A. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
Z
Zakerdoost, H. Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
Zamanian, M. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
Zareei, A. Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2018, Pages 665-672]
Zare Mehrjardi, M. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
Ziaee Shahraki, A. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
