Abbasi, S. Numerical Simulation of Tip Leakage Flow Structure in the Transonic Axial Compressor in Different Performance Conditions [Volume 51, Issue 2, 2019, Pages 471-482]
Abbasi Varzaneh, Hamidreza Energy and Exergy Analyses of the Performance of a Spark Ignition Engine Using Two-Zone Combustion Model [Volume 51, Issue 4, 2019, Pages 61-70]
Abbassi, Abbas Numerical Heat Transfer by Nanofluids in a wavy walls Microchannel using Dispersion Method [Volume 51, Issue 4, 2019, Pages 121-130]
Afra, B. Simulation of Two Circular Particles Falling in Vertical Channel: Combination of Immersed Boundary Lattice Boltzmann Method and Discrete Element Method [Volume 51, Issue 2, 2019, Pages 313-328]
Afshari, A. Experimental Investigation of Flow Induced Noise Around Circular Cylinder by Measuring Unsteady Surface Pressures [Volume 51, Issue 2, 2019, Pages 329-346]
Afzalian, Mahdi Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
Agha Mirsalim, S.Mostafa Improvement of one-dimensional simulation of national engine with consideration of heat transfer and mechanical loss effects in the turbocharger [Volume 51, Issue 4, 2019, Pages 71-80]
Agha Mirsalim, S.Mostafa Steady Simulation of the Flow inside the Internal Combustion Engine Turbocharger’s
Turbine [Volume 51, Issue 6, 2020, Pages 1469-1486]
Aghamohammadi, Hamed Improvement in the flexural properties of basalt fibers/epoxy-aluminum laminate composites using multi-walled carbon nanotubes [Volume 51, Issue 3, 2019, Pages 81-90]
Aghasizade Shaarbaf, S. Identification of Tire Force Model Using Experimental Data of a New Scaled Test Rig for Design of Nonlinear Slip Controller [Volume 51, Issue 1, 2019, Pages 187-200]
Ahmadi-Brooghani, Yousef Relative Humidity Period Influence on Drying Induced Stresses in Intermittent Drying of Clay [Volume 51, Issue 4, 2019, Pages 181-190]
Ahmadimoghaddam, M.R. Simulation and Optimal Design of Solar Pool for Subsurface Irrigation [Volume 51, Issue 2, 2019, Pages 507-524]
Akbari, Davood Optimization of the Spot Weld Locations for Increasing the Joint Strength of the Welded Plates [Volume 51, Issue 5, 2019, Pages 1097-1105]
Akbari, Nozar Performance Investigation of Hybrid Darrieus-Savonius Wind Turbine Compared to
Straight-Bladed Darrieus Turbine by Three-Dimensional Numerical Simulation [Volume 51, Issue 6, 2020, Pages 1443-1454]
Akbarzadeh, P. A Power-law Preconditioning Approach for Accelerating the Convergence Rate of Steady and Unsteady Incompressible Turbulent Flows [Volume 51, Issue 2, 2019, Pages 437-454]
Alavioun, Seyyed Shahaboldin Steady Simulation of the Flow inside the Internal Combustion Engine Turbocharger’s
Turbine [Volume 51, Issue 6, 2020, Pages 1469-1486]
Alaviyoun, Seyed Shahaboddin Improvement of one-dimensional simulation of national engine with consideration of heat transfer and mechanical loss effects in the turbocharger [Volume 51, Issue 4, 2019, Pages 71-80]
Aliakbari, N. Design of Optimal Fuzzy Controllers for Semi Active Vibration Suppression of MultiFloor Buildings Based on a Distributed Parameter Model and Magneto Rheological Dampers [Volume 51, Issue 1, 2019, Pages 133-146]
Alizadeh, Ebrahim Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on
Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
Amanifard, N. Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method [Volume 51, Issue 2, 2019, Pages 427-436]
Amanifard, N. Analysis of Corona Wind Effect on Mass Transfer and Energy Consumption in Drying of Moist Object [Volume 51, Issue 2, 2019, Pages 281-296]
Amini, S. Study the Fatigue Behavior of AISI 1045 Steel Using Ultrasonic Fatigue Test Machine [Volume 51, Issue 5, 2019, Pages 1017-1024]
Amini, Y. Numerical Study on the Vortex-induced Vibration of Circular Cylinder [Volume 51, Issue 2, 2019, Pages 455-470]
Amiri Delouei, Amin Investigation of 3-D Nanofluid Natural Convection in Presence of Magnetic Field using Double MRT Lattice Boltzmann method [Volume 51, Issue 4, 2019, Pages 111-120]
Amjadi, Gholamhossein The Effect of Calcium Carbonate Nanoparticles and Compatibilizer on the Surface
Roughness and the Surface Scratch Resistance of the Polyamide 6 [Volume 51, Issue 5, 2019, Pages 1069-1076]
Anbarlooie, Behnam Micromechanical failure analysis and tensile behavior of dual phase steel using 2D and 3D RVEs [Volume 51, Issue 3, 2019, Pages 21-30]
Arabi, Hamid Numerical and Experimental Investigation of Lubricant Effect in an Isothermal Precision Forging Process of a Titanium Blade Using Open Die Compression of Cylindrical Rod Test [Volume 51, Issue 5, 2019, Pages 1089-1096]
Arab maleki, vahid Passive Vibration Control of the Fluid Conveying Pipes using Dynamic Vibration Absorber [Volume 51, Issue 3, 2019, Pages 111-120]
Arefian, Amir Numerical Investigation of a Pulse-Jet Filter Cleaning System Performance [Volume 51, Issue 6, 2020, Pages 1455-1468]
Arghavani, Jamal Simulation and optimization of shape memory alloy cables [Volume 51, Issue 3, 2019, Pages 71-80]
Ariaei, A. Repair of Free Vibration Behavior of a Cracked Rotating Timoshenko Beam Using a Piezoelectric Patch and Applying Differential Transform Method [Volume 51, Issue 1, 2019, Pages 97-108]
Arvin Boroujeni, H. Stability of a Blade with Varying Rotation Speed by Considering the Lagging Motion [Volume 51, Issue 1, 2019, Pages 147-156]
Asadi, Morteza On the Behavior of Carbon and Kevlar Fibers in Cylindrical Composites Subjected to
Low-velocity Impact: Experimental Observation and Numerical Analysis [Volume 51, Issue 5, 2019, Pages 1025-1040]
Ashouri, A. Numerical Study on the Vortex-induced Vibration of Circular Cylinder [Volume 51, Issue 2, 2019, Pages 455-470]
Ashraf, S.R A C1 Finite Element Formulation for Mindlin-Reissner Microplate Model [Volume 51, Issue 1, 2019, Pages 3-18]
Askari Lahdarboni, A. A Power-law Preconditioning Approach for Accelerating the Convergence Rate of Steady and Unsteady Incompressible Turbulent Flows [Volume 51, Issue 2, 2019, Pages 437-454]
Assaee, H. Experimental Study of Energy Absorption of Square Column under Multi-Indentation Loading [Volume 51, Issue 1, 2019, Pages 33-42]
Azadi, Mohammad Active Flutter Control of a Swept Wing with an Engine by using Piezoelectric Actuators [Volume 51, Issue 3, 2019, Pages 161-170]
Azimi, S. Mohammad Hosein Active Flutter Control of a Swept Wing with an Engine by using Piezoelectric Actuators [Volume 51, Issue 3, 2019, Pages 161-170]
B
Babakhani, H. Comparison of the Hemodynamic Parameters of Sequential Parallel and Cross Configurations of Coronary Artery in the Rest State [Volume 51, Issue 2, 2019, Pages 497-506]
Baghani, Mostafa Investigation of Viscoelastic-Viscoplastic-Viscodamage Behavior of Polymers under
Cyclic Loadings and Parametric Study of Their Mechanical Behavior [Volume 51, Issue 5, 2019, Pages 967-980]
Baheri Islami, Sima Experimental Study of Hydrodynamic Behavior and Breakup of Liquid Jet with/
without the Electric Field [Volume 51, Issue 6, 2020, Pages 1487-1498]
Bakhsheshy, A. Free Vibration Analysis of Two-Dimensional Functionally Graded Annular Sector Plates with Piezoelectric Layers Resting on Two-Parameter Elastic Foundation [Volume 51, Issue 1, 2019, Pages 109-118]
Bakhshian Nik, Amirala The Effect of Bone Tissue Engineering Scaffold Architecture on Mechanical Modulation of Cell Layer Behavior [Volume 51, Issue 3, 2019, Pages 11-20]
Baniasadi, Ehasn Energy and Exergy Analyses of the Performance of a Spark Ignition Engine Using Two-Zone Combustion Model [Volume 51, Issue 4, 2019, Pages 61-70]
Basirat Tabrizi, Hassan Modeling and Experimental study of force convection frost formation over a curved surface [Volume 51, Issue 4, 2019, Pages 151-160]
Behbahaninejad, M. Numerical and Experimental Study of Two-phase Flow in Downward vertical Pipe [Volume 51, Issue 2, 2019, Pages 413-426]
Behroozizade, E. Numerical Simulation of Tip Leakage Flow Structure in the Transonic Axial Compressor in Different Performance Conditions [Volume 51, Issue 2, 2019, Pages 471-482]
Behzadmehr, Amin Thermal Analysis of a Solar Wall Equipped to Nano Phase Change Material [Volume 51, Issue 4, 2019, Pages 131-140]
Beig Mohammadi, Mohammad Numerical and Experimental Investigation of Lubricant Effect in an Isothermal Precision Forging Process of a Titanium Blade Using Open Die Compression of Cylindrical Rod Test [Volume 51, Issue 5, 2019, Pages 1089-1096]
Botshekanan Dehkordi, Mohsen Buckling investigation of cylindrical shell using size-dependent new super element [Volume 51, Issue 3, 2019, Pages 41-50]
C
Chakherlou Tajbakhsh, Navid Investigation of thermal cycle effect prior to cyclic loading on fatigue life of interference fitted specimens and fatigue life prediction [Volume 51, Issue 3, 2019, Pages 1-10]
Chalangaran, Navid Experimental Investigation into Sound transmission Loss through Concrete Containing Recycled Rubber [Volume 51, Issue 3, 2019, Pages 131-140]
Choupani, NaghdAli Experimental and Numerical Investigation on Mixed Mode Fracture of PMMA [Volume 51, Issue 5, 2019, Pages 1077-1088]
D
Dadgar-Rad, F. A C1 Finite Element Formulation for Mindlin-Reissner Microplate Model [Volume 51, Issue 1, 2019, Pages 3-18]
Daei Sorkhabi, Amir Hossein The Effect of Calcium Carbonate Nanoparticles and Compatibilizer on the Surface
Roughness and the Surface Scratch Resistance of the Polyamide 6 [Volume 51, Issue 5, 2019, Pages 1069-1076]
Damangir, Ebrahimi Modeling and Experimental study of force convection frost formation over a curved surface [Volume 51, Issue 4, 2019, Pages 151-160]
Darvishi, Farshid Investigation of the Free Longitudinal Vibration of Single-Walled Coiled Carbon Nanotubes (SWCCNTs) using Molecular Dynamics Simulation [Volume 51, Issue 3, 2019, Pages 91-100]
Davari, Ali R. A New Approach for Uncertainty Analysis of the Numerical Data Using Genetic Algorithm Based on Grid Refinement [Volume 51, Issue 6, 2020, Pages 1381-1394]
Dehghan, A.A. Experimental Investigation of Flow Induced Noise Around Circular Cylinder by Measuring Unsteady Surface Pressures [Volume 51, Issue 2, 2019, Pages 329-346]
Dehghan, Ali Akbar Semi-empirical Investigation of Trailing Edge Noise by Measuring Unsteady Surface
Pressures [Volume 51, Issue 6, 2020, Pages 1253-1270]
Dehghan, Mahnaz A New Approach for Uncertainty Analysis of the Numerical Data Using Genetic Algorithm Based on Grid Refinement [Volume 51, Issue 6, 2020, Pages 1381-1394]
Dehghan, M., M. A New Approach for Uncertainty Analysis of the Numerical Data Using Genetic Algorithm Based on Grid Refinement [Volume 51, Issue 6, 2020, Pages 1381-1394]
Delavari, Hadi Fractional order adaptive fuzzy terminal sliding mode controller design for a knee joint orthosis [Volume 51, Issue 3, 2019, Pages 151-160]
Derazgisoo, S.M. A Power-law Preconditioning Approach for Accelerating the Convergence Rate of Steady and Unsteady Incompressible Turbulent Flows [Volume 51, Issue 2, 2019, Pages 437-454]
Deymi-Dashtebayaz, M. Investigation of the Cooling System Condenser Fans Performance at Different Speeds of Subway Train [Volume 51, Issue 2, 2019, Pages 365-380]
Dolati, F. Analysis of Corona Wind Effect on Mass Transfer and Energy Consumption in Drying of Moist Object [Volume 51, Issue 2, 2019, Pages 281-296]
Dolati, S. Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method [Volume 51, Issue 2, 2019, Pages 427-436]
E
Ebrahimi Mamaghani, A. Mathematical Modelling and Resonance Analysis in Impact Oscillators [Volume 51, Issue 1, 2019, Pages 157-168]
Eghbalpour, Roozbeh Investigation of Viscoelastic-Viscoplastic-Viscodamage Behavior of Polymers under
Cyclic Loadings and Parametric Study of Their Mechanical Behavior [Volume 51, Issue 5, 2019, Pages 967-980]
Einali, A. Simulation and Optimal Design of Solar Pool for Subsurface Irrigation [Volume 51, Issue 2, 2019, Pages 507-524]
Emdadi, Mohammad Numerical Study of Water Droplet Impact on a Surface Using a Sharp Approach for
Interface Modeling [Volume 51, Issue 6, 2020, Pages 1427-1442]
Eshaghi, Mahdi Experimental Study of Abrasive Flow Rotary Machining and Effect of Abrasive Paste
Temperature on Material Removal Rate of the Process [Volume 51, Issue 5, 2019, Pages 1157-1166]
Eshraghi, H. Transient Numerical Analysis of a Tandem Compressor Stage [Volume 51, Issue 2, 2019, Pages 399-412]
Eskandari, Abdollah Design of a Pelton Turbine Installed on Centrifugal Pump in Reverse Osmosis System
for Energy Recovery [Volume 51, Issue 6, 2020, Pages 1395-1410]
Eslami Farsani, Reza Improvement in the flexural properties of basalt fibers/epoxy-aluminum laminate composites using multi-walled carbon nanotubes [Volume 51, Issue 3, 2019, Pages 81-90]
Esmailpour, Kazem Parametric Study of Temperature Field of Impinging Burner of Synthetic Gas by Interferometry Mach-Zehnder Method [Volume 51, Issue 4, 2019, Pages 51-60]
F
Fallahi, Amir Numerical Analysis of Temperature Distribution in A 3-D MR Image-Based Human Finger Model under Severe Cold Conditions [Volume 51, Issue 4, 2019, Pages 171-180]
Farahat, S. Simulation and Optimal Design of Solar Pool for Subsurface Irrigation [Volume 51, Issue 2, 2019, Pages 507-524]
Farajpoor khanaposhtani, Mojtaba Steady Simulation of the Flow inside the Internal Combustion Engine Turbocharger’s
Turbine [Volume 51, Issue 6, 2020, Pages 1469-1486]
Farrahi, Ali Effect of Rotating Speed of Probe on Micro-Hardness, Tensile Strength, Fatigue Behavior and Failure Mode of Friction Stir Spot Weld of Al 6061-T6 of Lap-shear Specimens [Volume 51, Issue 3, 2019, Pages 31-40]
Foorginejad, Abolfazl Tire Hardness Modeling Based on Longitudinal Ultrasonic Velocity Using the Gaussian Process Regression [Volume 51, Issue 5, 2019, Pages 1005-1016]
Forozandeh, Hamed Experimental investigation of the effect of the flame holder geometry on flame length and NOx and CO emissions in a non-premixed burnerr [Volume 51, Issue 4, 2019, Pages 141-150]
G
Ganjiani, Mahdi Numerical Analysis of Mechanical Behavior of Semi-Crystalline Polymers Based on
Continuum Damage Mechanics [Volume 51, Issue 5, 2019, Pages 981-992]
Gerdooei, Mahdi Improving Mechanical Properties of Ultrafine-Grained Titanium Produced through
Warm ECAP Using a Novel Lubrication System [Volume 51, Issue 5, 2019, Pages 1047-1056]
Ghadami, M. Numerical Investigation of the Target Geometry Influence on the Glare Damage Caused By Medium-Caliber AP-Projectile [Volume 51, Issue 1, 2019, Pages 53-64]
Ghaderi, Seyed Hadi Improving Mechanical Properties of Ultrafine-Grained Titanium Produced through
Warm ECAP Using a Novel Lubrication System [Volume 51, Issue 5, 2019, Pages 1047-1056]
Ghalyanchi Langeroudi, Hossein Numerical and Experimental Analysis for Fluid Flow Inside Corrugated Tube quipped with Twisted Tapes [Volume 51, Issue 6, 2020, Pages 1339-1362]
Gharraei Khosroshahi, Reza Experimental Study of Hydrodynamic Behavior and Breakup of Liquid Jet with/
without the Electric Field [Volume 51, Issue 6, 2020, Pages 1487-1498]
Ghasemi, Ahmad Reza Determination and Reducing of Curvature from Residual Stresses in Cured Shapes by Using Carbon Nanotubes in Unsymmetric Carbon/Epoxy Laminates [Volume 51, Issue 5, 2019, Pages 1107-1018]
Gorji, Hamid The Study of Effective Process Parameters in the Warm Sheet Hydroforming [Volume 51, Issue 5, 2019, Pages 1057-1068]
H
Haghighifard, H. Effect of Support on Wind Flow Field Around Array of Two Inline Buildings [Volume 51, Issue 2, 2019, Pages 249-260]
Hajidavalloo, E. Numerical and Experimental Study of Two-phase Flow in Downward vertical Pipe [Volume 51, Issue 2, 2019, Pages 413-426]
Haji ghafoori boukani, Navid Numerical Investigation of Vortex-Induced Vibrations of an elastically-mounted
Circular Cylinder Beneath a Free Surface: Modes & Frequencies [Volume 51, Issue 6, 2020, Pages 1169-1186]
Hanafizadeh, P. Numerical and Experimental Study of Two-phase Flow in Downward vertical Pipe [Volume 51, Issue 2, 2019, Pages 413-426]
Hasanzadeh, H. Numerical Study of Brinkman Number Effects on Heated Viscoelastic Fluid Flow in Channel with Sudden Expansion [Volume 51, Issue 2, 2019, Pages 483-496]
Hasanzadeh, Hasan Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
Heidarinejad, G. Comparison of the Hemodynamic Parameters of Sequential Parallel and Cross Configurations of Coronary Artery in the Rest State [Volume 51, Issue 2, 2019, Pages 497-506]
Heidarinejad, Ghassem Numerical Study of the Hemodynamic Parameters of Y-Bypass Graft at Rest and
Exercise State [Volume 51, Issue 6, 2020, Pages 1325-1338]
Heidari Shirazi, Kourosh Crack identification in postbuckled plates using differential quadrature element method and sequential quadratic programming [Volume 51, Issue 3, 2019, Pages 51-60]
Hekmat, Shahriyar Experimental Investigation on the Performance of Hybrid Thermal Management System Based on Water Cooling and Phase Change Material for a Lithium Battery Module of an Electric Vehicle [Volume 51, Issue 4, 2019, Pages 21-30]
Hemmasian Ettefagh, Massoud Computation algorithms of feasible sets and robust feasible sets for constrained linear time-invariant systems parametrized with orthonormal functions [Volume 51, Issue 3, 2019, Pages 171-180]
Hemmati, Seyed Jalal Experimental Study of Abrasive Flow Rotary Machining and Effect of Abrasive Paste
Temperature on Material Removal Rate of the Process [Volume 51, Issue 5, 2019, Pages 1157-1166]
Heydari, H. Optimal Trajectory Planning of a Quadrotor Based on Minimum Effort [Volume 51, Issue 1, 2019, Pages 169-179]
Hojjati, A.H. Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method [Volume 51, Issue 2, 2019, Pages 427-436]
Hosseinalipoor, Seyed Mostafa Numerical Investigation of Vortex-Induced Vibrations of an elastically-mounted
Circular Cylinder Beneath a Free Surface: Modes & Frequencies [Volume 51, Issue 6, 2020, Pages 1169-1186]
Hosseini, Majid Micromechanical failure analysis and tensile behavior of dual phase steel using 2D and 3D RVEs [Volume 51, Issue 3, 2019, Pages 21-30]
Hosseini, R. Mathematical Modelling and Resonance Analysis in Impact Oscillators [Volume 51, Issue 1, 2019, Pages 157-168]
Hosseini Abardeh, Reza Numerical Investigation of a Pulse-Jet Filter Cleaning System Performance [Volume 51, Issue 6, 2020, Pages 1455-1468]
Hosseini Poor, Seyed Jamal The Study of Effective Process Parameters in the Warm Sheet Hydroforming [Volume 51, Issue 5, 2019, Pages 1057-1068]
Hosseini-Toudeshky, Hossein Micromechanical failure analysis and tensile behavior of dual phase steel using 2D and 3D RVEs [Volume 51, Issue 3, 2019, Pages 21-30]
Hosseinpour, Seyed Mohammad The Study of Effective Process Parameters in the Warm Sheet Hydroforming [Volume 51, Issue 5, 2019, Pages 1057-1068]
I
Imani, A. A C1 Finite Element Formulation for Mindlin-Reissner Microplate Model [Volume 51, Issue 1, 2019, Pages 3-18]
Irani, Mohsen Thermal Analysis of a Solar Wall Equipped to Nano Phase Change Material [Volume 51, Issue 4, 2019, Pages 131-140]
Izadpanah, E. Numerical Study on the Vortex-induced Vibration of Circular Cylinder [Volume 51, Issue 2, 2019, Pages 455-470]
J
Jabbari, Fatemeh Investigation Dynamic Viscosity of Water-Single Wall Carbon Nanotube Nanofluid and Its Effective Factors By Molecular Dynamics Simulation [Volume 51, Issue 4, 2019, Pages 91-100]
Jabbari, M. Electro-mechanical Analysis of Rotating Cylinder Made of Functionally Graded Piezoelectric Materials: Sensor and Actuator [Volume 51, Issue 1, 2019, Pages 215-224]
Jabbari, mohammad Mehdi Experimental Investigation into Sound transmission Loss through Concrete Containing Recycled Rubber [Volume 51, Issue 3, 2019, Pages 131-140]
Jafari Beinabaj, Alireza Numerical modeling of magnetic field effects on flame shape, temperature and CO2, CO and NO emission of laminar diffusion combustion of methane [Volume 51, Issue 4, 2019, Pages 81-90]
Javadi, Seyed Mohammad Numerical and Experimental Investigation of Non-Newtonian High Viscosity Flow
Field in Multi Materials Extrusion Process [Volume 51, Issue 6, 2020, Pages 1363-1380]
Javaherdeh, Kourosh Numerical and Experimental Analysis for Fluid Flow Inside Corrugated Tube quipped with Twisted Tapes [Volume 51, Issue 6, 2020, Pages 1339-1362]
Jokar, Royaa Fractional order adaptive fuzzy terminal sliding mode controller design for a knee joint orthosis [Volume 51, Issue 3, 2019, Pages 151-160]
K
Kamali, Mohammad Taher A Semi-Analytical Method Based on the Mixed Formulation for the Elastic Analysis
of a Crack in an Anisotropic Homogeneous Medium [Volume 51, Issue 5, 2019, Pages 1019-1130]
Karimi Khoozani, M. Determination of Critical Speeds and Divergence Instability Boundary for a High- Speed Double- Helical Planetary Gear System [Volume 51, Issue 1, 2019, Pages 180-186]
Kayhani, M.H. Simulation of Two Circular Particles Falling in Vertical Channel: Combination of Immersed Boundary Lattice Boltzmann Method and Discrete Element Method [Volume 51, Issue 2, 2019, Pages 313-328]
Kazemi, S. R. A Peridynamic Study on Crack Growth in Plates with Two Anti-symmetric Cracks under Various Tensile Velocities [Volume 51, Issue 1, 2019, Pages 43-52]
Kermani, Mohammad J. A parametric investigation of two phase flow in the cathode side of polymer electrolyte membrane fuel cell [Volume 51, Issue 4, 2019, Pages 31-40]
Keshavarz, M. R. Experimental Study of Energy Absorption of Square Column under Multi-Indentation Loading [Volume 51, Issue 1, 2019, Pages 33-42]
Keshtkar, Mohammad Mehdi Thermoeconomic Analysis of a Variable
Refrigerant Flow System [Volume 51, Issue 4, 2019, Pages 1-10]
Khadem, Javad Numerical modeling of magnetic field effects on flame shape, temperature and CO2, CO and NO emission of laminar diffusion combustion of methane [Volume 51, Issue 4, 2019, Pages 81-90]
Khaleghi, H. Numerical Investigation of Water Management in the Cathode and Anode Sides of Proton Exchange Membrane Fuel Cell [Volume 51, Issue 2, 2019, Pages 227-248]
Khavasi, Ehsan Numerical Study of Lock Exchange Turbidity Current Depositional Behavior in Stratified Environment [Volume 51, Issue 6, 2020, Pages 1235-1252]
Khorasanizadeh, H. Investigation of Nanofluid Flow Field and Conjugate Heat Transfer in a Microchannel Heat Sink with Four Different Arrangements [Volume 51, Issue 2, 2019, Pages 381-398]
Khorasanizadeh, Hossein Thermal performance and entropy generation analyses of nanofluid flow in a trapezoidal heat sink with different arrangements [Volume 51, Issue 4, 2019, Pages 101-110]
Khorram, Asghar Computational Investigation of the Effect of Adhesion between Cancer Cells and
Vessel Walls on the Movement of the Cells in Blood Vessels [Volume 51, Issue 6, 2020, Pages 1271-1288]
Khorshidi, K. Free Vibration Analysis of Two-Dimensional Functionally Graded Annular Sector Plates with Piezoelectric Layers Resting on Two-Parameter Elastic Foundation [Volume 51, Issue 1, 2019, Pages 109-118]
Khorshidian, Majid Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on
Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
Khosrojerdi, Ehsan The Study of Effective Process Parameters in the Warm Sheet Hydroforming [Volume 51, Issue 5, 2019, Pages 1057-1068]
Kiani, Mehrdad Parametric Study of Temperature Field of Impinging Burner of Synthetic Gas by Interferometry Mach-Zehnder Method [Volume 51, Issue 4, 2019, Pages 51-60]
M
Maghsoudloo, Hamed Improving Mechanical Properties of Ultrafine-Grained Titanium Produced through
Warm ECAP Using a Novel Lubrication System [Volume 51, Issue 5, 2019, Pages 1047-1056]
Mahbadi, H. Free Vibration Analysis of Two-Dimensional Functionally Graded Annular Sector Plates with Piezoelectric Layers Resting on Two-Parameter Elastic Foundation [Volume 51, Issue 1, 2019, Pages 109-118]
Majnouni Mehrdar, Moein Investigating the Influence of Geometry on Performance Characteristics of Mounted
Cushions in Hydraulic Cylinders [Volume 51, Issue 6, 2020, Pages 1187-1200]
Makvandi, Hesam Crack identification in postbuckled plates using differential quadrature element method and sequential quadratic programming [Volume 51, Issue 3, 2019, Pages 51-60]
Malaeke, Hasan Modeling Nonlinear Free Vibrations of Wind Turbine Tower [Volume 51, Issue 3, 2019, Pages 121-130]
Malekzadeh Fard, K. Buckling Analysis of Designed Fiber Metal Laminate Circular Cylindrical Shell Based on Maximum Tension Fracture Criterion [Volume 51, Issue 1, 2019, Pages 65-78]
Maryami, R. Experimental Investigation of Flow Induced Noise Around Circular Cylinder by Measuring Unsteady Surface Pressures [Volume 51, Issue 2, 2019, Pages 329-346]
Masrouri Saadat, Sayed Hossein Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on
Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
Mazidi, Abbas Active Flutter Control of a Swept Wing with an Engine by using Piezoelectric Actuators [Volume 51, Issue 3, 2019, Pages 161-170]
Mehdipour, Hadi Numerical Analysis of Mechanical Behavior of Semi-Crystalline Polymers Based on
Continuum Damage Mechanics [Volume 51, Issue 5, 2019, Pages 981-992]
Mehrabi, M. Buckling and Vibration Analyses of Double-bonded Micro Composite Plates Reinforced by CNTs and BNNTs Based on MSGT [Volume 51, Issue 1, 2019, Pages 79-96]
Mirzaee Khalil Abadi, Mohammad Ali Investigation of the Microstructure and Mechanical Properties of Aluminum/Brass
Composite Produced by Accumulative Roll-Bonding Process [Volume 51, Issue 5, 2019, Pages 1041-1046]
Mirzaei, M. Identification of Tire Force Model Using Experimental Data of a New Scaled Test Rig for Design of Nonlinear Slip Controller [Volume 51, Issue 1, 2019, Pages 187-200]
Moeenfard, H. Design of Optimal Fuzzy Controllers for Semi Active Vibration Suppression of MultiFloor Buildings Based on a Distributed Parameter Model and Magneto Rheological Dampers [Volume 51, Issue 1, 2019, Pages 133-146]
Mohaddes Deylami, H. Analysis of Corona Wind Effect on Mass Transfer and Energy Consumption in Drying of Moist Object [Volume 51, Issue 2, 2019, Pages 281-296]
Mohammadi, H. Analysis of Static Pull-in Instability and Nonlinear Vibrations of an Functionally Graded Micro-Resonator Beam [Volume 51, Issue 1, 2019, Pages 119-132]
Mohammadi, Younes On the Behavior of Carbon and Kevlar Fibers in Cylindrical Composites Subjected to
Low-velocity Impact: Experimental Observation and Numerical Analysis [Volume 51, Issue 5, 2019, Pages 1025-1040]
Mohammadi-Fesharaki, Mohammad Determination and Reducing of Curvature from Residual Stresses in Cured Shapes by Using Carbon Nanotubes in Unsymmetric Carbon/Epoxy Laminates [Volume 51, Issue 5, 2019, Pages 1107-1018]
Mohammadi Mehr, M. Buckling and Vibration Analyses of Double-bonded Micro Composite Plates Reinforced by CNTs and BNNTs Based on MSGT [Volume 51, Issue 1, 2019, Pages 79-96]
Mohammadzadeh, K. Numerical Investigation of Water Management in the Cathode and Anode Sides of Proton Exchange Membrane Fuel Cell [Volume 51, Issue 2, 2019, Pages 227-248]
Mokhtari, A. Airplane Nonlinear Aerodynamic Model Identification in Spin Maneuver by Using Extended Multi Input Approach [Volume 51, Issue 1, 2019, Pages 201-214]
Molaeimanesh, Gholam Reza Experimental Investigation on the Performance of Hybrid Thermal Management System Based on Water Cooling and Phase Change Material for a Lithium Battery Module of an Electric Vehicle [Volume 51, Issue 4, 2019, Pages 21-30]
Mollahoseini, Zahra Computational Investigation of the Effect of Adhesion between Cancer Cells and
Vessel Walls on the Movement of the Cells in Blood Vessels [Volume 51, Issue 6, 2020, Pages 1271-1288]
Mollamahdi, Mahdi Experimental investigation of the effect of the flame holder geometry on flame length and NOx and CO emissions in a non-premixed burnerr [Volume 51, Issue 4, 2019, Pages 141-150]
Moradi, Shapour Crack identification in postbuckled plates using differential quadrature element method and sequential quadratic programming [Volume 51, Issue 3, 2019, Pages 51-60]
Mousavi, S.M. J. Analysis of Static Pull-in Instability and Nonlinear Vibrations of an Functionally Graded Micro-Resonator Beam [Volume 51, Issue 1, 2019, Pages 119-132]
Mousavi seyedy, seyed reza Investigating the Influence of Geometry on Performance Characteristics of Mounted
Cushions in Hydraulic Cylinders [Volume 51, Issue 6, 2020, Pages 1187-1200]
Mousavizadegan, S. H. Experimental and Numerical Study of a Submerged Submarine Moving Near the Free Surface [Volume 51, Issue 2, 2019, Pages 347-364]
M.Tusi, A. Transient Numerical Analysis of a Tandem Compressor Stage [Volume 51, Issue 2, 2019, Pages 399-412]
N
Naderi, M. Repair of Free Vibration Behavior of a Cracked Rotating Timoshenko Beam Using a Piezoelectric Patch and Applying Differential Transform Method [Volume 51, Issue 1, 2019, Pages 97-108]
Naraghi, Mahyar Computation algorithms of feasible sets and robust feasible sets for constrained linear time-invariant systems parametrized with orthonormal functions [Volume 51, Issue 3, 2019, Pages 171-180]
Naserian-Nik, Ali Mohammad Numerical and Experimental Investigation of Non-Newtonian High Viscosity Flow
Field in Multi Materials Extrusion Process [Volume 51, Issue 6, 2020, Pages 1363-1380]
Nazari, A. Buckling Analysis of Designed Fiber Metal Laminate Circular Cylindrical Shell Based on Maximum Tension Fracture Criterion [Volume 51, Issue 1, 2019, Pages 65-78]
Nazari, H. Simulation of Hydrodynamic Behavior of a Conductive Drop Under an Electric Field [Volume 51, Issue 2, 2019, Pages 297-312]
Nazari, M. Simulation of Two Circular Particles Falling in Vertical Channel: Combination of Immersed Boundary Lattice Boltzmann Method and Discrete Element Method [Volume 51, Issue 2, 2019, Pages 313-328]
Nazari, Mohsen Simultaneous Simulation of Gas Diffusion Layer and Air Channel in a Polymer Electrolyte Membrane Fuel Cell: Pore-Scale Modeling of Water Flooding [Volume 51, Issue 6, 2020, Pages 1289-1304]
Nazeri Boori Abadi, R. Investigation of the Cooling System Condenser Fans Performance at Different Speeds of Subway Train [Volume 51, Issue 2, 2019, Pages 365-380]
Negahban, Mir Hossein Numerical Investigation of Flow Behavior Around Chordwise Morphing NACA 0012 [Volume 51, Issue 6, 2020, Pages 1411-1426]
Neshaei, M.A.L. Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method [Volume 51, Issue 2, 2019, Pages 427-436]
Norouzi, M. Numerical Study of Brinkman Number Effects on Heated Viscoelastic Fluid Flow in Channel with Sudden Expansion [Volume 51, Issue 2, 2019, Pages 483-496]
Nourbakhsh, Amireh Simulation of heat transfer in shutdown time of engine by conjugate heat transfer [Volume 51, Issue 4, 2019, Pages 161-170]
P
Pirali, P. Numerical Investigation of the Target Geometry Influence on the Glare Damage Caused By Medium-Caliber AP-Projectile [Volume 51, Issue 1, 2019, Pages 53-64]
Poorveis, Davood Crack identification in postbuckled plates using differential quadrature element method and sequential quadratic programming [Volume 51, Issue 3, 2019, Pages 51-60]
Pournaderi, P. Simulation of Hydrodynamic Behavior of a Conductive Drop Under an Electric Field [Volume 51, Issue 2, 2019, Pages 297-312]
PourSina, M. Determination of Critical Speeds and Divergence Instability Boundary for a High- Speed Double- Helical Planetary Gear System [Volume 51, Issue 1, 2019, Pages 180-186]
PourSina, Mehrdad Investigation of Macro- Geometric and Micro- Geometric Modification on the Static Transmission Error and Load Sharing Factor of Helical Gears [Volume 51, Issue 3, 2019, Pages 61-70]
Q
Qasemi, Hamed On the Behavior of Carbon and Kevlar Fibers in Cylindrical Composites Subjected to
Low-velocity Impact: Experimental Observation and Numerical Analysis [Volume 51, Issue 5, 2019, Pages 1025-1040]
Qasemi, Sediqeh A Semi-Analytical Method Based on the Mixed Formulation for the Elastic Analysis
of a Crack in an Anisotropic Homogeneous Medium [Volume 51, Issue 5, 2019, Pages 1019-1130]
R
Raeiszadeh, F. Numerical and Experimental Study of Two-phase Flow in Downward vertical Pipe [Volume 51, Issue 2, 2019, Pages 413-426]
Raesi, Mohammad Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
Rahgoshay, Seyed Majid Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on
Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
Rahimi Esboee, Mazaher Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on
Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
Rahmani, Omid Investigation of the Free Longitudinal Vibration of Single-Walled Coiled Carbon Nanotubes (SWCCNTs) using Molecular Dynamics Simulation [Volume 51, Issue 3, 2019, Pages 91-100]
Rajabpour, Ali Investigation Dynamic Viscosity of Water-Single Wall Carbon Nanotube Nanofluid and Its Effective Factors By Molecular Dynamics Simulation [Volume 51, Issue 4, 2019, Pages 91-100]
Rakhshandeh, Ali Investigation of the Microstructure and Mechanical Properties of Aluminum/Brass
Composite Produced by Accumulative Roll-Bonding Process [Volume 51, Issue 5, 2019, Pages 1041-1046]
Ranjbar, Ali Akbar Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on
Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
Razavi, Seyed Esmail Numerical Investigation of Flow Behavior Around Chordwise Morphing NACA 0012 [Volume 51, Issue 6, 2020, Pages 1411-1426]
Rezaei, Mohsen Investigation of Macro- Geometric and Micro- Geometric Modification on the Static Transmission Error and Load Sharing Factor of Helical Gears [Volume 51, Issue 3, 2019, Pages 61-70]
Rezazadeh, N. Investigation of the Cooling System Condenser Fans Performance at Different Speeds of Subway Train [Volume 51, Issue 2, 2019, Pages 365-380]
Rostami, A. Comparison of the Hemodynamic Parameters of Sequential Parallel and Cross Configurations of Coronary Artery in the Rest State [Volume 51, Issue 2, 2019, Pages 497-506]
Rostami, Javad Numerical Heat Transfer by Nanofluids in a wavy walls Microchannel using Dispersion Method [Volume 51, Issue 4, 2019, Pages 121-130]
Rostami, Milad A Coupled Finite Element Model to Study on Mechanical and Thermal Features of
Resistance Spot Welding Process with Experimental Verification [Volume 51, Issue 5, 2019, Pages 1147-1156]
Rouzegar, J. Experimental Study of Energy Absorption of Square Column under Multi-Indentation Loading [Volume 51, Issue 1, 2019, Pages 33-42]
S
Sabzeh Parvar, M. Airplane Nonlinear Aerodynamic Model Identification in Spin Maneuver by Using Extended Multi Input Approach [Volume 51, Issue 1, 2019, Pages 201-214]
Sadeghi, R. Investigation of Nanofluid Flow Field and Conjugate Heat Transfer in a Microchannel Heat Sink with Four Different Arrangements [Volume 51, Issue 2, 2019, Pages 381-398]
Saedodin, Seifollah Investigation Dynamic Viscosity of Water-Single Wall Carbon Nanotube Nanofluid and Its Effective Factors By Molecular Dynamics Simulation [Volume 51, Issue 4, 2019, Pages 91-100]
Saeedi, Ali Numerical modeling of magnetic field effects on flame shape, temperature and CO2, CO and NO emission of laminar diffusion combustion of methane [Volume 51, Issue 4, 2019, Pages 81-90]
Saffar-Avval, Majid Numerical Heat Transfer by Nanofluids in a wavy walls Microchannel using Dispersion Method [Volume 51, Issue 4, 2019, Pages 121-130]
Sajjadi, Hasan Investigation of 3-D Nanofluid Natural Convection in Presence of Magnetic Field using Double MRT Lattice Boltzmann method [Volume 51, Issue 4, 2019, Pages 111-120]
Salami Hosseini, Mahdi Droplet Deformation Between Two Moving Parallel Plates [Volume 51, Issue 6, 2020, Pages 1305-1324]
Salehi, A. Investigation of the Ratcheting on Corroded Places with Different Shape and Depths in Elbow Pipe under Internal Pressure and Cyclic Bending Moment [Volume 51, Issue 1, 2019, Pages 19-32]
Salimpour, Mohammad Reza Numerical Analysis of Temperature Distribution in A 3-D MR Image-Based Human Finger Model under Severe Cold Conditions [Volume 51, Issue 4, 2019, Pages 171-180]
Sarhaddi, Faramarz Thermal Analysis of a Solar Wall Equipped to Nano Phase Change Material [Volume 51, Issue 4, 2019, Pages 131-140]
Sepehrnia, M. Investigation of Nanofluid Flow Field and Conjugate Heat Transfer in a Microchannel Heat Sink with Four Different Arrangements [Volume 51, Issue 2, 2019, Pages 381-398]
Sepehrnia, Mojtaba Thermal performance and entropy generation analyses of nanofluid flow in a trapezoidal heat sink with different arrangements [Volume 51, Issue 4, 2019, Pages 101-110]
Shabani Nejad, E. Buckling and Vibration Analyses of Double-bonded Micro Composite Plates Reinforced by CNTs and BNNTs Based on MSGT [Volume 51, Issue 1, 2019, Pages 79-96]
Shafiei, Mohammad Behshad Experimental Investigation of a solar system to produce fresh water from waste heat of photovoltaic module using Heat pipes [Volume 51, Issue 4, 2019, Pages 41-50]
Shafiei Mayam, M.H. Turbulent Structures in the Wake of a Wind Turbine Using Large Eddy Simulation [Volume 51, Issue 2, 2019, Pages 261-280]
Shahani, Amir reza Effect of Rotating Speed of Probe on Micro-Hardness, Tensile Strength, Fatigue Behavior and Failure Mode of Friction Stir Spot Weld of Al 6061-T6 of Lap-shear Specimens [Volume 51, Issue 3, 2019, Pages 31-40]
Shahbani Zahiri, A. Numerical Study of Brinkman Number Effects on Heated Viscoelastic Fluid Flow in Channel with Sudden Expansion [Volume 51, Issue 2, 2019, Pages 483-496]
Shahmardan, M. Numerical Study of Brinkman Number Effects on Heated Viscoelastic Fluid Flow in Channel with Sudden Expansion [Volume 51, Issue 2, 2019, Pages 483-496]
Shahnazi, M.A. A Power-law Preconditioning Approach for Accelerating the Convergence Rate of Steady and Unsteady Incompressible Turbulent Flows [Volume 51, Issue 2, 2019, Pages 437-454]
Shahsavari, Hamid Investigation of Viscoelastic-Viscoplastic-Viscodamage Behavior of Polymers under
Cyclic Loadings and Parametric Study of Their Mechanical Behavior [Volume 51, Issue 5, 2019, Pages 967-980]
Shakouri, M. A Peridynamic Study on Crack Growth in Plates with Two Anti-symmetric Cracks under Various Tensile Velocities [Volume 51, Issue 1, 2019, Pages 43-52]
Shamsodini Lori, R. Transient Numerical Analysis of a Tandem Compressor Stage [Volume 51, Issue 2, 2019, Pages 399-412]
Shariati, S. Kh. Experimental and Numerical Study of a Submerged Submarine Moving Near the Free Surface [Volume 51, Issue 2, 2019, Pages 347-364]
Sharifi, P. Analysis of Static Pull-in Instability and Nonlinear Vibrations of an Functionally Graded Micro-Resonator Beam [Volume 51, Issue 1, 2019, Pages 119-132]
Sheidani, Armin Experimental Comparison of Breakup and Flow Characteristics of Rectangular and
Elliptical Water Jets [Volume 51, Issue 6, 2020, Pages 1201-1216]
Shirani, Ebrahim Numerical Analysis of Temperature Distribution in A 3-D MR Image-Based Human Finger Model under Severe Cold Conditions [Volume 51, Issue 4, 2019, Pages 171-180]
Shojaeifard, Mohammad Investigation of Viscoelastic-Viscoplastic-Viscodamage Behavior of Polymers under
Cyclic Loadings and Parametric Study of Their Mechanical Behavior [Volume 51, Issue 5, 2019, Pages 967-980]
Shokrolahi-Zadeh, Babak A Semi-Analytical Method Based on the Mixed Formulation for the Elastic Analysis
of a Crack in an Anisotropic Homogeneous Medium [Volume 51, Issue 5, 2019, Pages 1019-1130]
Soleimani, Iman Buckling investigation of cylindrical shell using size-dependent new super element [Volume 51, Issue 3, 2019, Pages 41-50]
T
Tadi Bani, Yaghoob Buckling investigation of cylindrical shell using size-dependent new super element [Volume 51, Issue 3, 2019, Pages 41-50]
Tadjfar, Mehran Experimental Comparison of Breakup and Flow Characteristics of Rectangular and
Elliptical Water Jets [Volume 51, Issue 6, 2020, Pages 1201-1216]
Taghizadeh, Hadi Investigation of thermal cycle effect prior to cyclic loading on fatigue life of interference fitted specimens and fatigue life prediction [Volume 51, Issue 3, 2019, Pages 1-10]
Taheri, Morteza Tire Hardness Modeling Based on Longitudinal Ultrasonic Velocity Using the Gaussian Process Regression [Volume 51, Issue 5, 2019, Pages 1005-1016]
Taheri, Morteza Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
Talebi Tooti, Mostafa Free vibration analysis of nanotube-reinforced composite conical shell in high temperature environment [Volume 51, Issue 3, 2019, Pages 101-110]
Tavakol, M. Effect of Support on Wind Flow Field Around Array of Two Inline Buildings [Volume 51, Issue 2, 2019, Pages 249-260]
Tavana, Mahdi Experimental Study of Hydrodynamic Behavior and Breakup of Liquid Jet with/
without the Electric Field [Volume 51, Issue 6, 2020, Pages 1487-1498]
Teymouri, Saba Numerical Study of Lock Exchange Turbidity Current Depositional Behavior in Stratified Environment [Volume 51, Issue 6, 2020, Pages 1235-1252]
Towhidkhah, Farzad Computation algorithms of feasible sets and robust feasible sets for constrained linear time-invariant systems parametrized with orthonormal functions [Volume 51, Issue 3, 2019, Pages 171-180]
V
Vahidi, Bahman The Effect of Bone Tissue Engineering Scaffold Architecture on Mechanical Modulation of Cell Layer Behavior [Volume 51, Issue 3, 2019, Pages 11-20]
Vahidi, Bahman Computational Investigation of the Effect of Adhesion between Cancer Cells and
Vessel Walls on the Movement of the Cells in Blood Vessels [Volume 51, Issue 6, 2020, Pages 1271-1288]
Vakili Tahami, F. Investigation of the Ratcheting on Corroded Places with Different Shape and Depths in Elbow Pipe under Internal Pressure and Cyclic Bending Moment [Volume 51, Issue 1, 2019, Pages 19-32]
Valizadeh, J. Simulation and Optimal Design of Solar Pool for Subsurface Irrigation [Volume 51, Issue 2, 2019, Pages 507-524]
Vashahri, Javad Parametric Study of Temperature Field of Impinging Burner of Synthetic Gas by Interferometry Mach-Zehnder Method [Volume 51, Issue 4, 2019, Pages 51-60]
Veisi, A. Turbulent Structures in the Wake of a Wind Turbine Using Large Eddy Simulation [Volume 51, Issue 2, 2019, Pages 261-280]
Y
Yazdani, Kh. Analysis of Corona Wind Effect on Mass Transfer and Energy Consumption in Drying of Moist Object [Volume 51, Issue 2, 2019, Pages 281-296]
Yousefi, Hamid Numerical Study of Lock Exchange Turbidity Current Depositional Behavior in Stratified Environment [Volume 51, Issue 6, 2020, Pages 1235-1252]
Z
Zahiri, Ramin Thermoeconomic Analysis of a Variable
Refrigerant Flow System [Volume 51, Issue 4, 2019, Pages 1-10]
Zamani Nejad, Mohammad Electro-mechanical Analysis of Rotating Cylinder Made of Functionally Graded Piezoelectric Materials: Sensor and Actuator [Volume 51, Issue 1, 2019, Pages 215-224]
Zare dehabadi, Amirabbas Investigation of Macro- Geometric and Micro- Geometric Modification on the Static Transmission Error and Load Sharing Factor of Helical Gears [Volume 51, Issue 3, 2019, Pages 61-70]
Zehsaz, M. Investigation of the Ratcheting on Corroded Places with Different Shape and Depths in Elbow Pipe under Internal Pressure and Cyclic Bending Moment [Volume 51, Issue 1, 2019, Pages 19-32]
Zehtabiyan-Rezaie, Navid Numerical Investigation of a Pulse-Jet Filter Cleaning System Performance [Volume 51, Issue 6, 2020, Pages 1455-1468]
Zolfaghari, Alireza Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
