Simulation of Orthotropic Damaged Zone Behavior Using Viscoelastic Models

Document Type : Research Article

Authors

Abstract

In Fracture phenomenon of orthotropic materials, generally in crack tip vicinity, an area called damaged zone appears that in quasi-brittle materials, is known as fracture process zone. This area contains a multitude of micro cracks which due to various reasons, failure analysis and fracture process of these materials has been difficult. Determination of Mechanical properties in this region can help to predict the value or even the direction of crack growth in orthotropic materials. So far, several models have been proposed to determine the mechanical properties of this region, but due to the immense complexity of this region, the results have not been expressed the behavior of this region properly. Moreover, the existence methods have not been verified with new experimental and numerical data, yet. the present paper, it was attempted to present a new numerical model based on viscoelastic theory (the linear springs and damping) and, according to Perony series, the mechanical properties of the damaged zone simulated. In new approach, that is based on experimenal and FEM results, the mechanical behavior of damaged zone can accurately simulated.

Keywords

Main Subjects


[1] A.R. Gowhari Anaraki, M. Fakoor. 2010.“Mixed mode fracture criterion for wood based on a reinforcement microcrack”, Materials Science and Engineering A, p.6.
[2] W.Thomson, 1865. “On the elasticity and viscosity of metals”. Proceedings of the Royal Society of London, 289-297.
[3] G. I. Barenblatt, 1962. “The mathematical theory of equilibrium cracks in brittle fracture”. Advances in applied mechanics, 7(55-129), 104.
[4] O. C., Zienkiewicz, M., Watson, & King, I. P., 1968. “A numerical method of visco-elastic stress analysis”.International Journal of Mechanical Sciences, 10(10),807-827.
[5] R. L., Taylor, K. S., Pister, & G. L. Goudreau, 1970.,“Thermomechanical analysis of viscoelastic solids”.International Journal for Numerical Methods in Engineering, 2(1), 45-59.
[6] A.P. Schniewind, and J.D. Barret, 1972. “Wood as a linear orthotropic viscoelastic material”. Wood Science and Technologies 6, 43–57.
[7] R. A. Schapery, 1975. “A theory of crack initiation and growth in viscoelastic media”. International Journal of Fracture, 11(1), 141-159.
[8] G. Guyon, 1987. “Prévisions de la rupture différée du pin maritime en flexion”, Doctoral dissertation, ANRT.
[9] P. Larricq, 1992. “Une méthode destimation des caractéristiques de rupture différée dun matériau viscoélastique orthotrope”. Application au bois.These, (738).
[10] V., Tvergaard, & J. W. Hutchinson, 1996. “Effect of strain-dependent cohesive zone model on predictions of crack growth resistance”. International Journal of Solids and Structures, 33(20), 3297-3308.
[11] W., Bradley, W. J., Cantwell, & H. H. Kausch, 1997.“Viscoelastic creep crack growth: a review of fracture mechanical analyses”. Mechanics of Time-Dependent Materials, 1(3), 241-268.
[12] D. H., Allen, & C. R. Searcy, 2001. “A micromechanical model for a viscoelastic cohesive zone”. International Journal of Fracture, 107(2), 159-176.
[13] J., Noh, & J.Whitcomb, 2003. “Effect of transverse matrix cracks on the relaxation moduli of linear viscoelastic laminates”. Journal of composite materials, 37(6), 543-558.
[14] R. M., Pitti, F.Dubois, , C., Petit, & N.Sauvat, 2007.“Mixed mode fracture separation in viscoelastic orthotropic media: numerical and analytical approach by the Mθv-integral”. International Journal of Fracture, 145(3), 181-193.
[15] G., Zagari, S., Fortino, & G., Dill–Langer, 2009.,“Fem Simulation Of Crack Growth In Glulam By Using A 3d OrthotropicViscoelastic Model And Cohesive Elements”. In Proceedings of the 7th Solid Mechanics Conference,Lisbon, Portugal.
[16] J. N. Reddy, “An introduction to continuum mechanics”. s.l. : Cambridge University Press, 2008.
[17] R.M. Chrestensen, 1982. “Theory of viscoelasticity:an Introduction”. Academic Press.
[18] Betten, J., 1981. “Creep theory of anisotropic solids”.Journal of Rheology (1978-present), 25(6), 565-581.
[19] N. W. Tschoegl, 2012. “The phenomenological theory of linear viscoelastic behavior: an ntroduction”.Springer Science & Business Media
[20] L. Gambarotta, S. Lagomarsino, “A microcrack damage model for brittle materials”, International Journal of Solids and Structures, pp. 177-198, 1993.
[21] K. C., Gramoll, D. A., Dillard, & , H. F. Brinson,1989. “A stable numerical solution method for inplane loading of nonlinear viscoelastic laminated orthotropic materials”. Composite Structures, 13(4),251-274.
[22] F.Dubois, C.Chazal, , & C.Petit, 2002. “Viscoelastic crack growth process in wood timbers: an approach by the finite element method for mode I fracture”. International journal of fracture, 113(4).
[23] Standard, A. S. T. M. (2008). D3039. D3039M-08.