[1] A. Ghodsbin Jahromi, H. Hatami, Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading, Amirkabir Journal of Mechanical Engineering, 49(4) (2018) 685-696. (in Persian)
[2] m. damghani noori, H. Hatami, A. Ghodsbin Jahromi, Experimental Investigation of Expanded Metal Tube Absorbers under Axial Impact Loading, Modares Mechanical Engineering, 15(1) (2015) 371-378. (in Persian)
[3] F. Raouf, J. Rezapour, S. Gohari Rad, R. Rajabiehfard, Investigating the Energy Absorption Parameters of Steel Cylindrical Shells Filled with Polyethylene Subjected to Quasi-static Loading, Aerospace Mechanics, 18(4) (2022) 65-76. (in Persian)
[4] H. Saeidi Googarchin, R. Rahmani, Theoretical, Experimental and Numerical Analysis of Behavior of Adhesive Bonded Joints Thin-Walled Aluminum-Composite Structures Under Axial Loading, Journal of Modeling in Engineering, 22(79) (2024) 293-310. (in Persian)
[5] S. Azarakhsh, A. Rahi, Experimental and Numerical Investigation of Energy Absorption in Thin-Walled Bi-tubular Conical Tubes under Axial Load, Iranian Journal of Mechanical Engineering Transactions of ISME, 21(3) (2019) 138-157. (in Persian)
[6] s.s. jafari, s. feli, Analytical investigation of energy absorption of sandwich panels with honeycomb core, Amirkabir Journal of Mechanical Engineering, 48(2) (2016) 157-168. (in Persian)
[7] J. Rouzegar, M.R. Keshavarz, H. Assaee, Experimental Study of Energy Absorption of Square Column under Multi-Indentation Loading, Amirkabir Journal of Mechanical Engineering, 51(1) (2019) 33-42. (in Persian)
[8] M. Choubini, G.H. Liaghat, M. Pol, Investigation of energy absorption and deformation of thin walled tubes with circle and square section geometries under transverse impact loading, Modares Mechanical Engineering, 15(1) (2015) 75-83. (in Persian)
[9] T. Wierzbicki, W. Abramowicz, On the Crushing Mechanics of Thin-Walled Structures, Journal of Applied Mechanics, 50(4a) (1983) 727-734.
[10] X. Zhang, G. Cheng, H. Zhang, Theoretical prediction and numerical simulation of multi-cell square thin-walled structures, Thin-Walled Structures, 44(11) (2006) 1185-1191.
[11] A. Alavi Nia, S. Chahardoli, Experimental and numerical investigation of hole and edge radius effect on collapse properties of cylindrical absorbers under axial impact loading, Journal of Modeling in Engineering, 16(53) (2018) 53-65. (in Persian)
[12] S. Feli, E. Makhsousse, S.S. Jafari, Dynamic progressive buckling of thin-wall grooved conical tubes under impact loading, International Journal of Crashworthiness, 25(2) (2020) 220-229.
[13] M. shafipour, S.Y. Ahmadi-Brooghani, Numerical and Experimental Study of Energy Absorption Amount of Functionally Graded Honeycomb with Negative Stiffness Property under Quasi-Static Load, Amirkabir Journal of Mechanical Engineering, 52(10) (2019) 2809-2822. (in Persian)
[14] G. Sun, X. Tian, J. Fang, F. Xu, G. Li, X. Huang, Dynamical bending analysis and optimization design for functionally graded thickness (FGT) tube, International Journal of Impact Engineering, 78 (2015) 128-137.
[15] G. Sun, F. Xu, G. Li, Q. Li, Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness, International Journal of Impact Engineering, 64 (2014) 62-74.
[16] J. Fang, Y. Gao, G. Sun, G. Zheng, Q. Li, Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness, International Journal of Mechanical Sciences, 103 (2015) 63-73.
[17] H. Stolarski, T. Belytschko, Large deformation, rigid-plastic dynamics by an extremum principle, Computer Methods in Applied Mechanics and Engineering, 21(2) (1980) 217-230.
[18] N. Jones, Dynamic inelastic response of strain rate sensitive ductile plates due to large impact, dynamic pressure and explosive loadings, International Journal of Impact Engineering, 74 (2014) 3-15.
[19] T. Mirzababaie Mostofi, M. Sayah Badkhor, H. Babaei, The Behavior of Quadrangular Plates under Impulsive Loading: a Dimensional Analysis, Aerospace Mechanics, 16(4) (2020) 85-99. (in Persian)
[20] T. Mirzababaie Mostofi, H. Babaei, M. Alitavoli, S. Hosseinzadeh, On dimensionless numbers for predicting large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile, Thin-Walled Structures, 112 (2017) 118-124.
[21] H. Babaei, T. Mirzababaie Mostofi, M. Alitavoli, A. Saeidinejad, Experimental investigation and dimensionless analysis of forming of rectangular plates subjected to hydrodynamic loading, Journal of Applied Mechanics and Technical Physics, 58(1) (2017) 139-147.
[22] A. Alavi Nia, M. Parsapour, An investigation on the energy absorption characteristics of multi-cell square tubes, Thin-Walled Structures, 68 (2013) 26-34.
)