[1] American Society of Heating, Refrigerating and Air-conditioning Engineers, ANSI/ASHRAE Standard 55-2013: Thermal Environmental Conditions for Human Occupancy, ASHRAE, 2013.
[2] J.L.M. Hensen, On the thermal interaction of building structure and heating and ventilating system, PhD Thesis, Technische Universiteit Eindhoven, 1991.
[3] N. Djongyang, R. Tchinda, D. Njomo, Thermal comfort: A review paper, Renewable and Sustainable Energy Reviews, 14(9) (2010) 2626-2640.
[4] A.C. Ogbonna, D.J. Harris, Thermal comfort in sub-Saharan Africa: Field study report in Jos-Nigeria, Applied Energy, 85(1) (2008) 1-11.
[5] M. Taleghani, M. Tenpierik, S. Kurvers, A. van den Dobbelsteen, A review into thermal comfort in buildings, Renewable and Sustainable Energy Reviews, 26 (2013) 201-215.
[6] American Society of Heating, Refrigerating and Air-conditioning Engineers, ASHRAE Handbook : fundamentals, ASHRAE, Atlanta, GA., USA, 2009.
[7] R. Li, S.C. Sekhar, A.K. Melikov, Thermal comfort and IAQ assessment of under-floor air distribution system integrated with personalized ventilation in hot and humid climate, Building and Environment, 45(9) (2010) 1906-1913.
[8] M. Zukowski, A new formula for determining a minimum recommended value of inlet air velocity from UFAD system to prevent occupants from draught risk, Building and Environment, 42(1) (2007) 171-179.
[9] A. Alajmi, W. El-Amer, Saving energy by using underfloor-air-distribution (UFAD) system in commercial buildings, Energy Conversion and Management, 51(8) (2010) 1637-1642.
[10] S.H. Ho, L. Rosario, M.M. Rahman, Comparison of underfloor and overhead air distribution systems in an office environment, Building and Environment, 46(7) (2011) 1415-1427.
[11] S. Schiavon, K.H. Lee, F. Bauman, T. Webster, Simplified calculation method for design cooling loads in underfloor air distribution (UFAD) systems, Energy and Buildings, 43(2) (2011) 517-528.
[12] K. Zhang, X. Zhang, S. Li, X. Jin, Experimental study on the characteristics of supply air for UFAD system with perforated tiles, Energy and Buildings, 80 (2014) 1-6.
[13] M.H. Fathollahzadeh, G. Heidarinejad, H. Pasdarshahri, Prediction of thermal comfort, IAQ, and energy consumption in a dense occupancy environment with the under floor air distribution system, Building and Environment, 90 (2015) 96-104.
[14] G. Heidarinejad, M.H. Fathollahzadeh, H. Pasdarshahri, Effects of return air vent height on energy consumption, thermal comfort conditions and indoor air quality in an under floor air distribution system, Energy and Buildings, 97 (2015) 155-161.
[15] M.H. Fathollahzadeh, G. Heidarinejad, H. Pasdarshahri, Producing a better performance for the under floor air distribution system in a dense occupancy space, Energy and Buildings, 126 (2016) 230-238.
[16] M. Afzalian, S.A. Zolfaghari, A. Foadadini, Effects of air change rate on comfort, air quality and energy consumption in an amphitheater with under-floor air distribution system, Modares Mechanical Engineering, 17(2) (2017) 284-294.
[17] M. Afzalian, F. Davodi, H. Hassanzadeh, S.A. Zolfaghari, M. Maerefat, Investigating the individual characteristics effects on thermal comfort conditions of occupants in a dense occupancy environment, Modares Mechanical Engineering, 17(2) (2017) 275-283.
[18] B. Rahmati, A. Heidarian, A.M. Jadidi, Investigation in performance of a hybrid under-floor air distribution with improved desk displacement ventilation system in a small office, Applied Thermal Engineering, 138 (2018) 861-872.
[19] Y.H. Yau, K.S. Poh, A. Badarudin, A numerical airflow pattern study of a floor swirl diffuser for UFAD system, Energy and Buildings, 158 (2018) 525-535.
[20] S. Gupta, Y. Yadav, Effect of different shape and position of air diffuser on thermal stratification with UFAD system using CFD, (2018).
[21] B.H. Yu, B.-M. Seo, S.H. Hong, S. Yeon, K.H. Lee, Influences of different operational configurations on combined effects of room air stratification and thermal decay in UFAD system, Energy and Buildings, 176 (2018) 262-274.
[22] R. Ashrafi, M. Azarbayjani, R. Cox, B. Futrell, J. Glass, A. Zarrabi, A. Amirazar, Assessing the Performance of UFAD System in an Office Building Located In Various Climate Zones, SimAUD conference, Atlanta, USA, 2019.
[23] A. Zolfaghari, M. Afzalian, Effects of Inlet Air diffusers' Arrangement on the performance of Displacement ventilation system based on thermal comfort conditions, indoor air quality and Energy consumption in a dense occupancy environment, Journal of Mechanical Engineering, University of Tabriz, 49(1) (2019) 21-30 (in Persian).
[24] A. Zolfaghari, S. Teymoori, Experimental investigation of the effects of inlet cooling air temperature on the occupants' local thermal sensation in the under-floor air distribution system, Amirkabir Journal of Mechanical Engineering, (2019) (in Persian).
[25] P.O. Fanger, Thermal comfort: Analysis and applications in environmental engineering, Danish Technical Press, 1970.
[26] Z. Lin, S. Deng, A study on the thermal comfort in sleeping environments in the subtropics—Developing a thermal comfort model for sleeping environments, Building and Environment, 43(1) (2008) 70-81.
[27] BS EN ISO 7730:2005 - Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria, (2005).
[28] M.F. Jentsch, G.J. Levermore, J.B. Parkinson, M.E. Eames, Limitations of the CIBSE design summer year approach for delivering representative near-extreme summer weather conditions, Building Services Engineering Research and Technology, 35(2) (2014) 155-169.