Improvement of aerodynamic coefficients of the airfoil with free form deformation with the aid of Artificial Neural Networks and Genetic Algorithm

Document Type : Research Article

Authors

1 Department of mechanical engineering , faculty of engineering , Ferdowsi University of Mashhad , Mashhad , Iran

2 Department of mechanical engineering , faculty of engineering , Ferdowsi University of Mashhad, Mashhad, Iran

Abstract

With the advent of morphing airfoils, the aerodynamics of wind turbines and wings underwent many changes. In this study, the aerodynamic coefficients of morphing airfoil based on NACA 0015 are optimized in the range of Reynolds number 105 to 106 and the angle of attack 0 to 12 degrees using Artificial Neural Network (ANN) and Genetic Algorithm (GA). First, the airfoils were created in MATLAB software by random control points and mesh generated in Gambit software, then in two-dimensional Ansys software were simulated. The simulation results, including lift and drag coefficients, separation point and pressure center, with control points were used to train the Artificial Neural Network (ANN). The trained function is given as an input function to the Genetic Algorithm (GA) to optimize the desired coefficients.
Lift coefficient, center of pressure, separation point and lift to drag ratio were optimized as a single objective, In single-objective optimization, the lift coefficient was increased by 18% using the morphing airfoil. Also, the lift coefficient and the center of pressure, the lift coefficient and the drag coefficient were optimized as the dual-objectives optimization. In the optimization of the dual objectives, lift and drag coefficients were controlled by 0.8 and 0.03, respectively, by the morphing airfoils.

Keywords

Main Subjects


 [1] R.D. Kornbluh, R. Pelrine, Q. Pei, S. Oh, J. Joseph, Ultrahigh strain response of field-actuated elastomeric polymers, in:  Smart Structures and Materials 2000: Electroactive Polymer Actuators and Devices (Eapad), International Society for Optics and Photonics, 2000, pp. 51-64.
[2] D.P. Garg, M.A. Zikry, G.L. Anderson, Current and potential future research activities in adaptive structures: an ARO perspective, Smart materials and structures, 10(4) (2001) 610.
[3] E. Hoogedoorn, G.B. Jacobs, A. Beyene, Aero-elastic behavior of a flexible blade for wind turbine application: A 2D computational study, Energy, 35(2) (2010) 778-785.
[4] B. Gardner, M. Selig, Airfoil design using a genetic algorithm and an inverse method, in:  41st Aerospace Sciences Meeting and Exhibit, 2003, pp. 43.
[5] K.R. Ram, S. Lal, M. Rafiuddin Ahmed, Low Reynolds number airfoil optimization for wind turbine applications using genetic algorithm, Journal of Renewable and Sustainable Energy, 5(5) (2013) 052007.
[6] C. Thill, J. Etches, I. Bond, K. Potter, P. Weaver, Morphing skins, The aeronautical journal, 112(1129) (2008) 117-139.
[7] J.-W. Lee, J.-H. Han, H.-K. Shin, H.-J. Bang, Active load control of wind turbine blade section with trailing edge flap: Wind tunnel testing, Journal of intelligent material systems and structures, 25(18) (2014) 2246-2255.
[8] S. Daynes, P.M. Weaver, A morphing trailing edge device for a wind turbine, Journal of Intelligent Material Systems and Structures, 23(6) (2012) 691-701.
[9] A. De Gaspari, S. Ricci, Knowledge-based shape optimization of morphing wing for more efficient aircraft, International Journal of Aerospace Engineering, 2015 (2015).
[10] L. Weishuang, T. Yun, L. Peiqing, Aerodynamic optimization and mechanism design of flexible variable camber trailing-edge flap, Chinese Journal of Aeronautics, 30(3) (2017) 988-1003.
[11] A. Nejat, P. Mirzabeygi, M.S. Panahi, Airfoil shape optimization using improved Multiobjective Territorial Particle Swarm algorithm with the objective of improving stall characteristics, Structural and Multidisciplinary Optimization, 49(6) (2014) 953-967.
[12] H. Wen, S. Sang, C. Qiu, X. Du, X. Zhu, Q. Shi, A new optimization method of wind turbine airfoil performance based on Bessel equation and GABP artificial neural network, Energy, 187 (2019) 116106.
[13] M. Fatehi, M. Nili-Ahmadabadi, O. Nematollahi, A. Minaiean, K.C. Kim, Aerodynamic performance improvement of wind turbine blade by cavity shape optimization, Renewable Energy, 132 (2019) 773-785.
[14] N. Ma, H. Lei, Z. Han, D. Zhou, Y. Bao, K. Zhang, L. Zhou, C. Chen, Airfoil optimization to improve power performance of a high-solidity vertical axis wind turbine at a moderate tip speed ratio, Energy, 150 (2018) 236-252.
[15] S. Acarer, Peak lift-to-drag ratio enhancement of the DU12W262 airfoil by passive flow control and its impact on horizontal and vertical axis wind turbines, Energy, 201 (2020) 117659.
[16] M. Hazewinkel, Encyclopaedia of Mathematics, in, Springer Science & Business Media, 1997.
[17] R.K.N. Parasaram, T. Charyulu, Airfoil Profile Design by Reverse Engineering Bezier Curve, International Journal of Mechanical Engineering and Robotics Research, 1(3) (2012) 410-420.
[18] F.M.White, Fluid Mechanics, 8th edition ed., McGraw-Hill, NY, 2016.
[19] H.K. Versteeg, W. Malalasekera, An introduction to computational fluid dynamics: the finite volume method, Pearson education, 2007.
[20] M. Kaewbumrung, W. Tangsopa, J. Thongsri, Investigation of the trailing edge modification effect on compressor blade aerodynamics using SST k-ω turbulence model, Aerospace, 6(4) (2019) 48.
[21] G. Srinivasan, J. Ekaterinaris, W. McCroskey, Evaluation of turbulence models for unsteady flows of an oscillating airfoil, Computers & Fluids, 24(7) (1995) 833-861.
[22] C. Rethmel, J. Little, K. Takashima, A. Sinha, I. Adamovich, M. Samimy, Flow separation control using nanosecond pulse driven DBD plasma actuators, International Journal of Flow Control, 3(4) (2011).
[23] F. Rosenblatt, The perceptron: a probabilistic model for information storage and organization in the brain, Psychological review, 65(6) (1958) 386.
[24] K. Chakraborty, S. Bhattacharyya, R. Bag, A.A. Hassanien, Sentiment analysis on a set of movie reviews using deep learning techniques, Social Network Analytics: Computational Research Methods and Techniques,  (2018) 127.
[25] D.E. Goldberg, Genetic algorithms in search, optimization, and machine learning. Addison, Reading,  (1989).
[26] A. Konak, D.W. Coit, A.E. Smith, Multi-objective optimization using genetic algorithms: A tutorial, Reliability engineering & system safety, 91(9) (2006) 992-1007.
[27] K. Deb, A. Pratap, S. Agarwal, T. Meyarivan, A fast and elitist multiobjective genetic algorithm: NSGA-II, IEEE transactions on evolutionary computation, 6(2) (2002) 182-197.