[1] Trimis, D., Durst, F., Picknacker, O. and Picknacker, K., “Porous Medium Combustor Versus Combustion Systems with Free Flames”, University Erlangen Nuremburg, Germany, 2002.
[2] Mobbauer S., Pickenacker O., Pickenacker K. and Trimis D., “Application of the Porous Burner Technology in Energy-and Heat-Engineering”, Proceeding of 5th Int. Conf. on Technologies and Combustion for a Clean Enviro.: Lisbon, pp. 519-523, 1999.
[3] Christo, F. C., “A Parametric Analysis of a Coupled Chemistry-Radiation Model in Porous Media”, DSTO – Research Report RR-0188, 2000.
[4] Howell J. R., communication via email, jhowell@mail.utexas.edu.
[5] Viskanta R, Gore JP, “Overview of cellular ceramics based porous radiant burners for supporting combustion”, Environ Combust Technol;1: 167e203, 2000.
[6] Mao-Zhao Xie, Jun-Rui Shi, Yang-Bo Deng, Hong Liu, Lei Zhou, You-Ning Xu, “Experimental and numerical investigation on performance of a porous medium burner with reciprocating flow”, Fuel 88, pp. 206–213, 2009.
[7] Ayman Bakry a, Ahmed Al-Salaymeh, Ala H. Al-Muhtaseb, Ahmad Abu-Jrai, D. Trimis, “Adiabatic premixed combustion in a gaseous fuel porous inert media under high pressure and temperature”: Novel flame stabilization technique, Fuel, 2010.
[8]H. Davarzani, M.Marcoux, P.Costeseque, M.Quintard, “Experimental measurement of the effective diffusion and thermodiffusion coefficients for binary gas mixture in porous media”, Chemical Engineering Science 65, pp.5092–5104, 2010.
[9] M. Abdul Mujeebu, M. Zulkifly Abdullah, A.A. Mohamad, M.Z. Abu Bakar, “Trends in modeling of porous media combustion”, Progress in Energy and Combustion Science 36 , pp. 627-650, 2010.
[10] R.C. Catapan, A.A.M. Oliveira, M. Costa, “Non-uniform velocity profile mechanism for flame stabilization in a porous radiant burner”, Experimental Thermal and Fluid Science 35, pp.172–179, 2011.
[11] Farid C. Christo, Lakshmanan V. Krishnamoorthy, “An Experimental and Numerical Study of Infrared (IR) Emission from a Porous Radiant Burner” Published by DSTO Aeronautical and Maritime Research Laboratory 506 Australia, 2001.
[12] Leonardi, A. S., Viskanta, R. and Gore, P. J., “Radiation and thermal performance measurements of a metal fiber burner”, Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 73, pp. 491-501, 2002.
[13] Vogel BJ, Ellzey JL, “Subadiabatic and superadiabatic performance of a twosection porous burner”, Combust Sci Technol 177: pp1323–38. 2005.
[14] Qiu K, Hayden ACS., “Thermophotovoltaic power generation systems using natural gas-fired radiant burners”, Sol Energy Mat Sol C;91: pp588–96, 2007.
[15] هاشمی، سید عبدالمهدی، عطوف، حسین؛ بررسی تجربی اثر ضخامت و تخلخل بر عملکرد مشعل تابشی متخلخل فلزی، سوخت و احتراق، سال دوم، شماره اول،.1388
[16] هاشمی، سید عبدالمهدی، امانی، جعفر، عطوف، حسین؛بررسی تجربی پایداری شعله در محیط متخلخل کاربید ، سیلیسیمی، مجله علمی پژوهشی امیرکبیر، سال 4۰. شماره ۰، تابستان 1390
[17] هولمن، جی . آر؛ روش های اندازه گیری در مهندسی،ترجمه ملکی و دیبایی نیا، انتشارات جهاد دانشگاهی دانشگاه صنعتی اصفهان، اصفهان، صفحات 79-97، 1369
)