[1] هولمن، ج.پی؛ ترجمه ملکی، م؛ دیبایینیا، ب؛ روشهای تجربی برای مهندسین، انتشارات جهاد دانشگاهی دانشگاه صنعتی. اصفهان، اصفهان، 1369
[2] هاشمی، س.ع.م؛ شاهرودیان، ح؛ عطوف، ح؛ بررسی تجربی یک نمونه مشعل تابشی از نوع محیط متخلخل فلزی،یازدهمین کنفرانس دینامیک شارهها، دانشگاه خواجه . نصیرالدین، خرداد 1387
[3] معتقدی فر، ر؛ بررسی تجربی مشعل متخلخل از جنس توری فلزی، پایاننامه کارشناسی ارشد، دانشگاه کاشان، دانشکده . مهندسی، 1388
[4] Glassman, Irvin; Combustion, 2nd Edition, Academic Press, Princeton-Newjersey, 114-151, 1987.
[5] Charles E. Baukal, Industrial Burners handbook, CRC Press, section 11-13, 2003.
[6] Kambiz Vafai; Handbook of Porous Media, 2nd Edition, CRC Press Taylor & Francis Group, US, 2005.
[7] Mößbauer, S., Pickenäcker,O., Pickenäcker K., Trimis, D., “Application of the Porous Burner Technology in Energy-and Heat-engineering”, Clean Air, 3, 185–198, 2002.
[8] Howell, J.R, Hall, M.J, Ellzey, J.L, ”Combustion of Hydrocarbon Fuels within Porous Inert Media”, Prog. Energ. Combust. Sci., 22, 121-145, 1996.
[9] Wood, S., Harris, A.T., “Porous burners for lean-burn applications”, Prog. Energ. Combustion Sci., 34, 667–684, 2008.
[10] Abdul Mujeebu, M., Abdullah, M.Z., Abu Bakar, M.Z., Mohamad, A.A., Muhad, R.M.N., Abdullah, M.K., “Combustion in porous media and its applications – A comprehensive survey”, J. Env. Man., 90, 2287-2312, 2009.
[11] Kotani, Y., Takeno, T., ‘‘An Experimental Study on Stability and Combustion Characteristics of an Excess Enthalpy Flame’’, Proc. Combust. Institute, 19, pp. 1503–1509, 1982.
[12] Sathe, S.B., Kulkarni, M.R., Peck, R.E., Tong, T.W., “An experimental and theoretical study of porous radiant burner performance”, Proc. Combust. Int., 23,1011–1018, 1990.
[13] McIntosh, A. C., Prothero, A., ”A model of large heat transfer surface combustion with radiant heat emission “, Combust. Flame., 83, 111-126, 1991.
[14] Min, D.K., Shin, H.D., “Laminar premixed flame stabilized inside a honeycomb ceramic”, Int. J. Heat Mass Trans., 34, 341–56,1991.
[15] Itaya, Y., Miyoshi, K., Maeda, S., Hasatani, M., “Surface combustion of a premixed methane–air gas on a porous ceramic”, Int. Chem. Eng., 32, 123–131, 1992.
[16] Hanamura, K., Echigo, R., “An analysis of flame stabilization mechanisms in radiation burners”, Wa¨rme Stoffu¨ bertrag, 26, 377–383, 1991.
[17] Hanamura, K., Echigo, R., Zhdanok, SA., “Superadiabatic combustion in a porous medium”, Int. J. Heat Mass Trans., 36, 3201–3209, 1993.
[18] Mital, R., Gore, J.P., Viskanta, R., “A Study of the Structure of Submerged Reaction Zone in Porous Ceramic Radiant Burners”, Combust. Flame, 111, 175-184, 1997.
[19] Brenner, G., Pickenacker, K., Pickenacker, O., Trimis, D., Wawrzinek, K., Weber, T., “Numerical and experimental investigation of matrix-stabilized methane/air combustion in porous inert media”, Combust Flame,123, 201–213, 2000.
[20] Diamantis, D.J., Mastorakos, E., Goussis, A., “Simulation of premixed combustion in porous media”, Combust Theor Model, 6, 383–411, 2002.
[21] Mathis Jr W.M., Ellzey J.L., “Flame stabilization, Operating Range and Emissions for a Methane/Air Porous Burner”, Combust. Sci. And Tech., 175, 825-839, 2003.
[22] Trimis, D., Wawrzinek, K., “Flame stabilization of highly diffusive gas mixtures in porous inert media”, J. Comput. Appl. Mech., 5, 367–381, 2004.
[23] Vogel, BJ., Ellzey, JL., “Subadiabatic and superadiabatic performance of a two section porous burner”, Combust Sci Technol, 177, 1323–38, 2005.
[24] Qiu, K., Hayden, ACS., “Premixed gas combustion stabilized in fibre felt and its application to a novel radiant burner”, Fuel, 85, 1094–1100, 2006.
)