Thermo-Mechanical Stress Analysis in a Rotating Radially Graded FG-Disc with Non-Uniform Thickness

Document Type : Research Article

Authors

1 1Mechanical Engineering Department, niversity of Kashan, Kashan, Iran

2 Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr/Isfahan, Iran

Abstract

In this paper, according to one-dimensional heat transfer rules and two-dimensional elasticity theory, the set of governing equation on temperature and thermo-mechanical stresses in a rotating radially graded FG-disc with non-uniform thickness are derived. All mechanical and thermal properties of the material including elastic modulus, Poisson’s ratio, density and thermal conductivity and expansion coefficients are considered to be graded radially according to a power law function; The volume fraction changes in radial direction between two desired values. In thermal analysis, convention heat transfer through two sides of the disc are considered and thermal boundary conditions are considered as constant temperature at inner edge and convention heat transfer at outer one. In order to increase the accuracy of analysis, variation of convective heat transfer coefficient in radial direction and its dependency on the rotating speed are considered. Considering complexity in equations, differential quadrature method (DQM) is used as strong approach and both thermal and mechanical equations are solved numerically. Effect of various parameters such as rotating speed, variation of thickness and power law index on the distribution of temperature, stress and deflection of the disc are investigated. Also, based on the Tamura-Tomota-Ozawa model (TTO), yield strength of the disc is derived and its elastic and plastic parts are detected.

Keywords

Main Subjects

References

[1] A.C. Ugural, S.K. Fenster, Advanced mechanics of materials and applied elasticity, Pearson Education, 2011.
[2] T.Y. Reddy, H. Srinath, Elastic stresses in a rotating anisotropic annular disk of variable thickness and variable density, International Journal of Mechanical Sciences, 16(2) (1974) 85-89.
[3] U. Güven, The fully plastic rotating solid disk of variable thickness, ZAMM‐Journal of Applied Mathematics andMechanics/Zeitschrift für Angewandte Mathematik und Mechanik, 74(1) (1994) 61-65.
[4] A. Eraslan, Y. Orcan, Elastic–plastic deformation of a rotating solid disk of exponentially varying thickness, Mechanics of Materials, 34(7) (2002) 423-432.
[5] M. Hojjati, A. Hassani, Theoretical and numerical analyses of rotating discs of non-uniform thickness and density, International Journal of Pressure Vessels and Piping, 85(10) (2008) 694-700.
[6] M. Bayat, M. Saleem, B. Sahari, A. Hamouda, E. Mahdi, Mechanical and thermal stresses in a functionally graded rotating disk with variable thickness due to radially symmetry loads, International Journal of Pressure Vessels and Piping, 86(6) (2009) 357-372.
[7] A.N. Eraslan, Elastic–plastic deformations of rotating variable thickness annular disks with free, pressurized and radially constrained boundary conditions, International Journal of Mechanical Sciences, 45(4) (2003) 643-667.
[8] A. Hassani, M. Hojjati, G. Farrahi, R. Alashti, Semiexact elastic solutions for thermo-mechanical analysis of functionally graded rotating disks, Composite Structures, 93(12) (2011) 3239-3251.
[9] M. Shahzamanian, B. Sahari, M. Bayat, F. Mustapha, Z. Ismarrubie, Finite element analysis of thermoelastic contact problem in functionally graded axisymmetric brake disks, Composite Structures, 92(7) (2010) 1591-1602.
[10] A. Afsar, J. Go, Finite element analysis of thermoelastic field in a rotating FGM circular disk, Applied Mathematical Modelling, 34(11) (2010) 3309-3320.
[11] S.H. Kordkheili, R. Naghdabadi, Thermoelastic analysis of a functionally graded rotating disk, Composite Structures, 79(4) (2007) 508-516.
[12] M. Bayat, B. Sahari, M. Saleem, A. Ali, S. Wong, Thermoelastic solution of a functionally graded variable thickness rotating disk with bending based on the firstorder shear deformation theory, Thin-Walled Structures, 47(5) (2009) 568-582.
[13] G. Nie, R. Batra, Stress analysis and material tailoring in isotropic linear thermoelastic incompressible functionally graded rotating disks of variable thickness, Composite Structures, 92(3) (2010) 720-729.
[14] J. Sharma, D. Sharma, S. Kumar, Stress and strain analysis of rotating FGM Thermoelastic circular disk by using FEM, International Journal of pure and applied mathematics, 74(3) (2012) 339-352.
[15] J. Wauer, B. Schweizer, Dynamics of rotating thermoelastic disks with stationary heat source, Applied Mathematics and Computation, 215(12) (2010) 4272-4279.
[16] X.-L. Peng, X.-F. Li, Thermal stress in rotating functionally graded hollow circular disks, Composite Structures, 92(8) (2010) 1896-1904.
[17] M. Shariyat, R. Mohammadjani, Three-dimensional compatible finite element stress analysis of spinning two-directional FGM annular plates and disks with load and elastic foundation non-uniformities, Latin American Journal of Solids and Structures, 10(5) (2013) 859-890.
[18] A.G. Arani, M. Abdollahian, Z.K. Maraghi, Thermoelastic analysis of a non-axisymmetrically heated FGPM hollow cylinder under multi-physical fields, International Journal of Mechanics and Materials in Design, 11(2)(2015) 157-171.
[19] A.T. Kalali, S.H. Moud, B. Hassani, Elasto-plastic stress analysis in rotating disks and pressure vessels made of functionally graded materials, Latin American Journal of Solids and Structures, 13(5) (2016) 819-834.
[20] A.G. Arani, E. Haghparast, Z.K. Maraghi, S. Amir, Static stress analysis of carbon nano-tube reinforced composite (CNTRC) cylinder under non-axisymmetric thermo-mechanical loads and uniform electro-magnetic fields, Composites Part B: Engineering, 68 (2015) 136-145.
[21] T.L. Bergman, F.P. Incropera, Introduction to heat transfer, John Wiley & Sons, 2011.
[22] G. Cardone, T. Astarita, G. Carlomagno, Heat transfer measurements on a rotating disk, International Journal of Rotating Machinery, 3(1) (1997) 1-9.
[23] G. Paulino, Z.-H. Jin, R. Dodds, S. Sahu, N. Badgayan, P.R. Sreekanth, Failure of functionally graded materials, (2014).
[24] R. Williamson, B. Rabin, J. Drake, Finite element analysis of thermal residual stresses at graded ceramicmetal interfaces. Part I. Model description and geometrical effects, Journal of Applied Physics, 74(2)(1993) 1310-1320.
[25] M. Mignolet, C. Eick, M. Harish, Free vibration of flexible rotating disks, Journal of sound and vibration, 196(5) (1996) 537-577.
[26] Z.-H. Jin, G.H. Paulino, R.H. Dodds Jr, Cohesive fracture modeling of elastic–plastic crack growth in functionally graded materials, Engineering Fracture Mechanics, 70(14) (2003) 1885-1912.
[27] R.G. Munro, Material properties of titanium diboride, Journal of Research of the National Institute of Standards and Technology, 105(5) (2000) 709.
[28] R. Carpenter, W. Liang, G.H. Paulino, J.C. Gibeling, Z. Munir, Fracture testing and analysis of a layered functionally graded Ti/TiB beam in 3-point bending, in: Materials Science Forum, Trans Tech Publ, 1999, pp.837-842.
[29] C.W. Bert, M. Malik, Differential quadrature method in computational mechanics: a review, Applied mechanics reviews, 49(1) (1996) 1-28.
Amirkabir Journal of Mechanical Engineering
Volume 50, Issue 1
May and June 2018
Pages 33-46

Files

Share

How to cite

Statistics