D. Brehl, T. Dow, Review of vibration-assisted machining, Precision engineering, 32(3) (2008) 153-172.
 F. Klocke, O. Dambon, B. Bulla, Ultrasonic assisted diamond turning of hardened steel with mono-crystalline diamond, Proceedings of the 10th International Euspen Conference, Zürich, Switzerland (2008).
 K. J. Trigger, B. T. Chao, An analytical evaluation of metal-cutting temperatures, ASME (1950).
 E. Usui, T. Shirakashi, T. Kitagawa, Analytical prediction of three dimensional cutting process—Part 3: Cutting temperature and crater wear of carbide tool, Journal of Engineering for industry, 100 (2) (1978) 236-243.
 J. Tlusty, E. Orady, Effect of thermal cycling on tool wear in milling, 9th NAMRC Conference, Penn. State University (1981).
 J.S. Strenkowski, K.J. Moon, Finite element prediction of chip geometry and tool work-piece temperature distributions in orthogonal metal cutting, Journal of Engineering for Industry, 112 (1990) 313–318.
 D.A. Stephenson, A. Ali, Tool temperatures in interrupted metal cutting. Journal of Engineering for Industry, 114 (1992).
 I. Lazoglu, Y. Altintas, Prediction of tool and chip temperature in continuous and interrupted machining, International Journal of Machine Tools and Manufacture, 42 (9) (2002) 1011-1022.
 X.D. Liu, Direct single point diamond cutting of stavax assisted with ultrasonic vibration to produce optical quality surface finish, ASPE proceedings (2003).
 T. Moriwaki, E. Shamoto, Ultrasonic elliptical vibration cutting, CIRP Annals-Manufacturing Technology, 44 (1) (1995) 31-34.
 A.V. Mitrofanov, V.I. Babitsky, V.V. Silberschmidt, Finite element simulations of ultrasonically assisted turning, Computational Materials Science, 28 (3) (2003) 645-653.
 A.V. Mitrofanov, V.I. Babitsky, V.V. Silberschmidt, Finite element analysis of ultrasonically assisted turning of Inconel 718, Journal of materials processing technology, 153 (2004) 233-239.
 N. Ahmed, 3D finite element analysis of ultrasonically assisted turning, Computational Materials Science, 39 (1) (2007) 149-154.
 S. Amini, FEM analysis of ultrasonic-vibration-assisted turning and the vibratory tool, Journal of materials processing technology, 201 (1) (2008) 43-47.
 J. Overcash, J.F. Cuttino, In-process modeling of dynamic tool-tip temperatures of a tunable vibration turning device operating at ultrasonic frequencies, Precision Engineering, 33(4) (2009) 505-515.
 R. Muhammad, Numerical modelling of vibration-assisted turning of Ti-15333, Procedia CIRP 1 (2012) 347-352.
 S. Patil, Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V, Ultrasonics 54 (2) (2014) 694-705.
 F. H. Cakir, Finite element modeling of ultrasonic assisted turning of Ti6Al4V alloy, Procedia-Social and Behavioral Sciences 195 (2015) 2839-2848.
 M. Lotfi, S. Amini, Effect of ultrasonic vibration on frictional behavior of tool–chip interface: Finite element analysis and experimental study, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232(7) (2016) 1212-1220.
 C. Milton, M. Shaw, Metal cutting principles. CIAIRENDON PRIESS· OXROIRD, (1984) 224-250.
 E.M. Trent, P.K. Wright, Metal cutting, Butterworth-Heinemann (2000).
 M. Sayuti, A.A. Sarhan, F. Salem, Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption, Journal of Cleaner Production 67 (2014) 265-276.
 F.J. Zerilli, R.W. Armstrong, Dislocation‐mechanics‐based constitutive relations for material dynamics calculations, Journal of Applied Physics 61 (5) (1987): 1816-1825.