Author Index

A

  • Abbaspour, Peyvand Free Vibration Analysis of Sandwich Cylindrical Shells with Multilayer Fiber-Metal Face sheets and Flexible Core Based on Higher-Order Sandwich Shell Theory [Volume 57, Issue 7, 2025]
  • Adibeig, Mohammad Reza Analysis of the Effect of Raster and Loading Orientations on the Mechanical Properties and Fracture Behavior of Polylactic Acid Polymer Produced by Additive Manufacturing [Volume 57, Issue 3, 2025, Pages 379-398]
  • Akbari, Peyman Bending and Deflection Analysis of Functionally Graded Porous Circular Plates with Radial Porosity Variation Based on the First-Order Shear Deformation Theory [Volume 57, Issue 3, 2025, Pages 333-360]
  • Akhtarshenas Ghadim, Omid Studying the effect of Implementing Air Spring on Kinematic Behavior, Stability and Handling of Heavy Vehicles [Volume 57, Issue 6, 2025, Pages 729-756]
  • Allahverdizadeh, Akbar Simulating Cardiac Function Using a Multiphysics Viscoelastic Biventricular Model [Volume 57, Issue 1, 2025, Pages 69-88]
  • Azimi, Abbas Optimum Walking Design for Biped Robots Based on the Improved Inverted Pendulum model [Volume 57, Issue 4, 2025, Pages 417-452]
  • Azimi, Abolfazl Detection and evaluation of core and face de-bonding in sandwich composite reinforced with carbon fibers using Pulsed heating infrared thermography method [Volume 57, Issue 4, 2025, Pages 401-416]

B

  • Barekat, Masoud Geometrical Identification of Defect in Parts Using Imaging and Photogrammetry Using Intelligent Methods [Volume 57, Issue 3, 2025, Pages 361-378]

C

  • Choopani, Yahya An Experimental Study on Abrasive Flow Machining of Artificial Hip Joint [Volume 57, Issue 2, 2025, Pages 215-234]
  • Choopani, Yahya Synergistic Effect of Rotating Magnetic Field and Ultrasonic Vibrations in Magnetorheological Abrasive Flow Finishing [Volume 57, Issue 4, 2025, Pages 453-472]
  • Cjeshmehnia, Esmaeil Design and construction of an electrohydrodynamic thruster for use in a flying microrobot [Volume 57, Issue 5, 2025, Pages 567-588]

D

  • Darabadi Zare, Aliakbar Cost Analysis of a Zero-Carbon Hydrogen, Power, and Heat System Using Advanced Nuclear and Sorption-Enhanced Methane Reforming [Volume 57, Issue 2, 2025, Pages 147-170]

E

  • Ebrahimi, Reza Resistive Load Effect on Chaotic Dynamic of a Nonlinear Piezoelectric Energy Harvester with Elastic Stoppers [Volume 57, Issue 2, 2025, Pages 125-146]
  • Eghdami, Zahra Sadat Regression Modeling and Experimental Analysis of Critical Time in the First Phase of Three-Dimensional Manipulation Using a Design-of-Experiments-Based Simulation Approach [Volume 57, Issue 7, 2025]
  • Esfandyari, Mohammad Geometrical Identification of Defect in Parts Using Imaging and Photogrammetry Using Intelligent Methods [Volume 57, Issue 3, 2025, Pages 361-378]
  • Eshaghi Oskui, Abuzar Analysis of the Effect of Raster and Loading Orientations on the Mechanical Properties and Fracture Behavior of Polylactic Acid Polymer Produced by Additive Manufacturing [Volume 57, Issue 3, 2025, Pages 379-398]
  • Ettefagh, Mir Mohammad Estimating the Remaining Useful Life of Bearings Using Weibull Function Fitting on IMF [Volume 57, Issue 1, 2025, Pages 105-122]

F

  • Falahatgar, Seyed Reza 3D Viscoelastic Composite Laminate Material for Structural Analysis in Finite Element Codes [Volume 57, Issue 6, 2025, Pages 795-814]
  • Fattahi, Abolfazl Thermoeconomic Analysis of a Polygeneration System for Flare Gas Recovery with Crude Oil Preheating [Volume 57, Issue 5, 2025, Pages 633-662]
  • Fazel, Mohammad Reza Using Integrated Predictive Model Control in the Simulation of Stability and Traction Control of an Electric Vehicle [Volume 57, Issue 5, 2025, Pages 611-632]
  • Feli, Saeed Dynamic progressive buckling of thin wall foam filled conical tubes under impact loading [Volume 57, Issue 4, 2025, Pages 497-520]

G

  • Ganjiani, Mehdi Experimental and Numerical Analysis of the Effect of Stress Triaxiality and Lode Angle Parameter on the Ductile Fracture of 321 Stainless Steel [Volume 57, Issue 5, 2025, Pages 545-566]
  • Ghanaati, Elahe Improving the cooling performance of a microchannel containing nanofluid using interrupted fins [Volume 57, Issue 7, 2025]
  • Ghane, Fereshte Regression Modeling and Experimental Analysis of Critical Time in the First Phase of Three-Dimensional Manipulation Using a Design-of-Experiments-Based Simulation Approach [Volume 57, Issue 7, 2025]
  • Ghasemi, Ahmad Reza Detection and evaluation of core and face de-bonding in sandwich composite reinforced with carbon fibers using Pulsed heating infrared thermography method [Volume 57, Issue 4, 2025, Pages 401-416]
  • Ghasemi-Varnamkhasti, Mahdi Resistive Load Effect on Chaotic Dynamic of a Nonlinear Piezoelectric Energy Harvester with Elastic Stoppers [Volume 57, Issue 2, 2025, Pages 125-146]
  • Gol mohammad pour, Payam Experimental investigation of the use of thermoelectric on a photovoltaic/thermal system to increase efficiency and heat transfer [Volume 57, Issue 6, 2025, Pages 685-708]

H

  • Haddadi, Elyas Analysis of the Effect of Raster and Loading Orientations on the Mechanical Properties and Fracture Behavior of Polylactic Acid Polymer Produced by Additive Manufacturing [Volume 57, Issue 3, 2025, Pages 379-398]
  • Hadjiaghaie Vafaie, Reza Design and Modeling of a Novel Two-stage Dielectrophoresis-Based Microfluidic Microseparator for Efficient Circulating Tumor Cell Separation [Volume 57, Issue 7, 2025]
  • Hajian, Reza Exoskeleton Robots and the Future of Rehabilitation; A Comprehensive Review on Lower-Limb Exoskeletons [Volume 57, Issue 2, 2025, Pages 235-264]
  • Hasani Baferani, Abolfazl Numerical investigation of the effect of mechanical properties of impedance-matched materials with the underwater environment on acoustic absorption using the finite element method. [Volume 57, Issue 1, 2025, Pages 43-68]
  • Hassanzadeh Bafghi, Ali A Numerical Study of the Effects of Blade Tip Clearance on the Performance of a Multi-Stage Transonic Axial Compressor [Volume 57, Issue 2, 2025, Pages 187-214]
  • Honarvar, Mohammad Hadi Evaluation of Neural Response Quality Based on Balanceable Region and Reaction Time [Volume 57, Issue 6, 2025, Pages 709-728]
  • Hosseini, Hadi Studying the effect of Implementing Air Spring on Kinematic Behavior, Stability and Handling of Heavy Vehicles [Volume 57, Issue 6, 2025, Pages 729-756]

J

  • Jadidi, Amir mohammad Experimental investigation of the use of thermoelectric on a photovoltaic/thermal system to increase efficiency and heat transfer [Volume 57, Issue 6, 2025, Pages 685-708]
  • Jamaati, Jafar Experimental and Numerical Investigation of the Effect of Metal Fiber on Thermal Conductivity of Phase Change Materials [Volume 57, Issue 4, 2025, Pages 521-542]
  • Jfari, Seyed Sajad Dynamic progressive buckling of thin wall foam filled conical tubes under impact loading [Volume 57, Issue 4, 2025, Pages 497-520]
  • Joudaki, Jalal Studying the effect of Implementing Air Spring on Kinematic Behavior, Stability and Handling of Heavy Vehicles [Volume 57, Issue 6, 2025, Pages 729-756]
  • Jouzani, Salar Study of the Effect of the Stress-Strain Range from a Uniaxial Tensile Test on the Hyperelastic Modeling of a Polyurethane Sealing Disc [Volume 57, Issue 5, 2025, Pages 663-682]
  • Jowzi, Mohamad Experimental and Numerical Investigation of the Effect of Metal Fiber on Thermal Conductivity of Phase Change Materials [Volume 57, Issue 4, 2025, Pages 521-542]

K

  • Karimabadi, Arezoo Experimental investigation of the use of thermoelectric on a photovoltaic/thermal system to increase efficiency and heat transfer [Volume 57, Issue 6, 2025, Pages 685-708]
  • Khaffaf pour, Reza Cost Analysis of a Zero-Carbon Hydrogen, Power, and Heat System Using Advanced Nuclear and Sorption-Enhanced Methane Reforming [Volume 57, Issue 2, 2025, Pages 147-170]
  • Khajehzadeh, Mohsen An Experimental Study on Abrasive Flow Machining of Artificial Hip Joint [Volume 57, Issue 2, 2025, Pages 215-234]
  • Khajehzadeh, Mohsen Synergistic Effect of Rotating Magnetic Field and Ultrasonic Vibrations in Magnetorheological Abrasive Flow Finishing [Volume 57, Issue 4, 2025, Pages 453-472]
  • Khaleghi, Hosein Study the Effect of Water Injection Upstream of the ‎Compressor of a Gas Microturbine Engine on the Off-design Performance [Volume 57, Issue 1, 2025, Pages 89-104]
  • Khaleghi, Hosein A Numerical Study of the Effects of Blade Tip Clearance on the Performance of a Multi-Stage Transonic Axial Compressor [Volume 57, Issue 2, 2025, Pages 187-214]
  • Khalesi, Mohammad Hossein Exoskeleton Robots and the Future of Rehabilitation; A Comprehensive Review on Lower-Limb Exoskeletons [Volume 57, Issue 2, 2025, Pages 235-264]
  • Khoogar, Ahmad Reza Geometrical Identification of Defect in Parts Using Imaging and Photogrammetry Using Intelligent Methods [Volume 57, Issue 3, 2025, Pages 361-378]
  • Khoshgoftar, Mohammad Javad Bending and Deflection Analysis of Functionally Graded Porous Circular Plates with Radial Porosity Variation Based on the First-Order Shear Deformation Theory [Volume 57, Issue 3, 2025, Pages 333-360]
  • Khoshkhoo, Rouhollah Design and construction of an electrohydrodynamic thruster for use in a flying microrobot [Volume 57, Issue 5, 2025, Pages 567-588]

M

  • Mahboobi, Mostafa Thermoeconomic Analysis of a Polygeneration System for Flare Gas Recovery with Crude Oil Preheating [Volume 57, Issue 5, 2025, Pages 633-662]
  • Makhsoos, Erfan Dynamic progressive buckling of thin wall foam filled conical tubes under impact loading [Volume 57, Issue 4, 2025, Pages 497-520]
  • Mansouri, Ehsan Regression Modeling and Experimental Analysis of Critical Time in the First Phase of Three-Dimensional Manipulation Using a Design-of-Experiments-Based Simulation Approach [Volume 57, Issue 7, 2025]
  • Mansouri, Mohsen Experimental and Numerical Analysis of the Effect of Stress Triaxiality and Lode Angle Parameter on the Ductile Fracture of 321 Stainless Steel [Volume 57, Issue 5, 2025, Pages 545-566]
  • MazraeKazemi, Mohammad Experimental and Numerical Analysis of the Effect of Stress Triaxiality and Lode Angle Parameter on the Ductile Fracture of 321 Stainless Steel [Volume 57, Issue 5, 2025, Pages 545-566]
  • Mesgarpur Tusi, Abulghasem Study the Effect of Water Injection Upstream of the ‎Compressor of a Gas Microturbine Engine on the Off-design Performance [Volume 57, Issue 1, 2025, Pages 89-104]
  • Meyghani, Naser A Numerical Study on the Influence of Geometric Parameters on Tesla Valve Performance within an Automatic Recirculation Control Valve System [Volume 57, Issue 4, 2025, Pages 473-496]
  • Mohammadi, Bijan An Entropy-Based Failure Prediction Model for Thermomechanical and Isothermal Fatigue Process [Volume 57, Issue 6, 2025, Pages 773-794]
  • Mohammadi, Rafat A Numerical Study on the Influence of Geometric Parameters on Tesla Valve Performance within an Automatic Recirculation Control Valve System [Volume 57, Issue 4, 2025, Pages 473-496]
  • Mohsenzadeh, Rasool Multiscale Study of Polymer Gear Failure Under Variable Torque Conditions [Volume 57, Issue 2, 2025, Pages 171-186]
  • Moradi, Amir Hosein Numerical investigation of the effect of mechanical properties of impedance-matched materials with the underwater environment on acoustic absorption using the finite element method. [Volume 57, Issue 1, 2025, Pages 43-68]
  • Moslemi-Abyaneh, Behzad Detection and evaluation of core and face de-bonding in sandwich composite reinforced with carbon fibers using Pulsed heating infrared thermography method [Volume 57, Issue 4, 2025, Pages 401-416]
  • Mostofi, Mohammad Numerical Investigation of Acoustic Noise of an Oscillating NACA0012 Airfoil Equipped with Triangular javascript:goStep(3)Serrations [Volume 57, Issue 3, 2025, Pages 303-332]

N

  • Namashiri, Pezhman Simulating Cardiac Function Using a Multiphysics Viscoelastic Biventricular Model [Volume 57, Issue 1, 2025, Pages 69-88]
  • Nazari, Mohsen Thermodynamic Modeling and Experimental Validation of Vacuum Cooling Crystallization for Zero Liquid Discharge Desalination [Volume 57, Issue 1, 2025, Pages 25-42]
  • Nazari, Mostafa Thermodynamic Modeling and Experimental Validation of Vacuum Cooling Crystallization for Zero Liquid Discharge Desalination [Volume 57, Issue 1, 2025, Pages 25-42]
  • Nazari, Mostafa Optimum Walking Design for Biped Robots Based on the Improved Inverted Pendulum model [Volume 57, Issue 4, 2025, Pages 417-452]
  • Noori, Sahar Numerical Investigation of Acoustic Noise of an Oscillating NACA0012 Airfoil Equipped with Triangular javascript:goStep(3)Serrations [Volume 57, Issue 3, 2025, Pages 303-332]
  • Noorian, Mohammadali Modeling and Analysis of Aeroelastic Instabilities in a Flexible Full Aircraft Using Quasi-Coordinate Formulation and Minimum State Aerodynamic Model [Volume 57, Issue 3, 2025, Pages 283-302]

P

  • Poorreza, Elnaz Design and Modeling of a Novel Two-stage Dielectrophoresis-Based Microfluidic Microseparator for Efficient Circulating Tumor Cell Separation [Volume 57, Issue 7, 2025]
  • Pourbafrani, Hamid Detection and evaluation of core and face de-bonding in sandwich composite reinforced with carbon fibers using Pulsed heating infrared thermography method [Volume 57, Issue 4, 2025, Pages 401-416]
  • Pourjafari, Mahdie Evaluation of Neural Response Quality Based on Balanceable Region and Reaction Time [Volume 57, Issue 6, 2025, Pages 709-728]

R

  • Rahimi, Mostafa Using bidirectional flow to improve thermal efficiency of flat heat exchangers containing phase change materials [Volume 57, Issue 7, 2025]
  • Rahmani, Fatemeh Study the Effect of Water Injection Upstream of the ‎Compressor of a Gas Microturbine Engine on the Off-design Performance [Volume 57, Issue 1, 2025, Pages 89-104]
  • Rahmani, Omid Free Vibration Analysis of Sandwich Cylindrical Shells with Multilayer Fiber-Metal Face sheets and Flexible Core Based on Higher-Order Sandwich Shell Theory [Volume 57, Issue 7, 2025]
  • Rajaei, Arsalan A Numerical Study on the Influence of Geometric Parameters on Tesla Valve Performance within an Automatic Recirculation Control Valve System [Volume 57, Issue 4, 2025, Pages 473-496]
  • Ramezani, Maryam Thermodynamic Modeling and Experimental Validation of Vacuum Cooling Crystallization for Zero Liquid Discharge Desalination [Volume 57, Issue 1, 2025, Pages 25-42]
  • Ranjbar-Roeintan, Mehdi Low-velocity impact on sandwich beams with 2D curved re-entrant auxetic cores [Volume 57, Issue 6, 2025, Pages 757-772]
  • Rasaee, Sajad Determination of Elastic Modulus Using Spherical Ball Indentation, Brinell Test Results [Volume 57, Issue 3, 2025, Pages 267-282]
  • Razfar, Mohammad Reza An Experimental Study on Abrasive Flow Machining of Artificial Hip Joint [Volume 57, Issue 2, 2025, Pages 215-234]
  • Razfar, Mohammad Reza Synergistic Effect of Rotating Magnetic Field and Ultrasonic Vibrations in Magnetorheological Abrasive Flow Finishing [Volume 57, Issue 4, 2025, Pages 453-472]
  • Rezaee, Vahid Evaluating of the Impact of Environmental Indicators on Thermal Comfort for Different Climates in Iran Using the PMV Model [Volume 57, Issue 1, 2025, Pages 3-24]
  • Rezaee, Vahid Comparative feasibility study of two direct expansion solar water heater heat pump systems in Rasht climate [Volume 57, Issue 5, 2025, Pages 589-610]

S

  • Sadeghi, Morteza H. Estimating the Remaining Useful Life of Bearings Using Weibull Function Fitting on IMF [Volume 57, Issue 1, 2025, Pages 105-122]
  • Salimi, Pouriya Using bidirectional flow to improve thermal efficiency of flat heat exchangers containing phase change materials [Volume 57, Issue 7, 2025]
  • Shafaghat, Salman Modeling and Analysis of Aeroelastic Instabilities in a Flexible Full Aircraft Using Quasi-Coordinate Formulation and Minimum State Aerodynamic Model [Volume 57, Issue 3, 2025, Pages 283-302]
  • Shahriyari, Mohammad Javad A Numerical Study of the Effects of Blade Tip Clearance on the Performance of a Multi-Stage Transonic Axial Compressor [Volume 57, Issue 2, 2025, Pages 187-214]
  • Sheikhzadeh, Ghanbar Ali Thermoeconomic Analysis of a Polygeneration System for Flare Gas Recovery with Crude Oil Preheating [Volume 57, Issue 5, 2025, Pages 633-662]
  • Sheikhzadeh, Ghanbar Ali Improving the cooling performance of a microchannel containing nanofluid using interrupted fins [Volume 57, Issue 7, 2025]
  • Shelesh-Nezhad, Karim Multiscale Study of Polymer Gear Failure Under Variable Torque Conditions [Volume 57, Issue 2, 2025, Pages 171-186]
  • Shoja Razavy, Reza Geometrical Identification of Defect in Parts Using Imaging and Photogrammetry Using Intelligent Methods [Volume 57, Issue 3, 2025, Pages 361-378]
  • Shokri Khanghah, Rojin Numerical Investigation of Acoustic Noise of an Oscillating NACA0012 Airfoil Equipped with Triangular javascript:goStep(3)Serrations [Volume 57, Issue 3, 2025, Pages 303-332]
  • Soltani Sharif Abadi, Ali Exoskeleton Robots and the Future of Rehabilitation; A Comprehensive Review on Lower-Limb Exoskeletons [Volume 57, Issue 2, 2025, Pages 235-264]
  • Soorgee, Mohammad Hossein Study of the Effect of the Stress-Strain Range from a Uniaxial Tensile Test on the Hyperelastic Modeling of a Polyurethane Sealing Disc [Volume 57, Issue 5, 2025, Pages 663-682]

T

  • Taghizadeh, Abouzar Evaluating of the Impact of Environmental Indicators on Thermal Comfort for Different Climates in Iran Using the PMV Model [Volume 57, Issue 1, 2025, Pages 3-24]
  • Taghizadeh, Abouzar Comparative feasibility study of two direct expansion solar water heater heat pump systems in Rasht climate [Volume 57, Issue 5, 2025, Pages 589-610]
  • Taheri, Moein Regression Modeling and Experimental Analysis of Critical Time in the First Phase of Three-Dimensional Manipulation Using a Design-of-Experiments-Based Simulation Approach [Volume 57, Issue 7, 2025]
  • Tahmasebi-Tahneh, Zahra Low-velocity impact on sandwich beams with 2D curved re-entrant auxetic cores [Volume 57, Issue 6, 2025, Pages 757-772]
  • Talebi, Zahra Estimating the Remaining Useful Life of Bearings Using Weibull Function Fitting on IMF [Volume 57, Issue 1, 2025, Pages 105-122]

V

  • Varedi Koulaei, S. Mojtaba Optimum Walking Design for Biped Robots Based on the Improved Inverted Pendulum model [Volume 57, Issue 4, 2025, Pages 417-452]

Y

  • Yari, Mortaza Cost Analysis of a Zero-Carbon Hydrogen, Power, and Heat System Using Advanced Nuclear and Sorption-Enhanced Methane Reforming [Volume 57, Issue 2, 2025, Pages 147-170]
  • Yazdanpanah, Milad Using Integrated Predictive Model Control in the Simulation of Stability and Traction Control of an Electric Vehicle [Volume 57, Issue 5, 2025, Pages 611-632]