Amirkabir Journal of Mechanical Engineering

Numerical Investigation of Vortex-Induced Vibrations of an Elastically-Mounted Circular Cylinder beneath a Free Surface

Volume 50, Issue 4, November and December 2018, Pages 727-740

10.22060/mej.2017.12138.5268

S.M. Hosseinalipour; N. Hajighafoori Boukani

Study of the Analytical Solutions and Modelling of Nonlinear Buckling in Bellows

Volume 53, Issue 2, May 2021, Pages 729-744

10.22060/mej.2019.16539.6394

mohammadhasan hajbagheri; Amir reza Shahani

Two-three degree of freedom model for Anti Stick-Slip Tool of drill-string

Volume 55, Issue 6, September 2023, Pages 737-758

10.22060/mej.2023.21883.7535

Amin Taraghi Osguei; behrouz Mohammad Alizadeh; Atabak Dobakhti

Investigation of the Effect of Different Friction Models On Experimental Extraction of 3D Nanomanipulation Force and Critical Time of Colon Cancer Tissue

Volume 54, Issue 4, July 2022, Pages 791-804

10.22060/mej.2021.20300.7210

Moein Taheri

Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing

Volume 52, Issue 4, July 2020, Pages 797-812

10.22060/mej.2019.14621.5900

Mohammad Valizadeh; Mohsen Behnia; Alireza Shahrabi Farahani; Hiwa Khaledi

Experimental investigation of the effect of pH on the stability and thermal conductivity of metal oxide nanofluids

Volume 55, Issue 7, October 2023, Pages 857-874

10.22060/mej.2023.22193.7578

Behrouz Raei

Investigation of Torsional Static Behavior of Nano-rods Embedded in Elastic Medium Considering Surface Energy Effect

Volume 50, Issue 5, January and February 2019, Pages 961-972

10.22060/mej.2017.12197.5290

R. Nazem Nezhad; M. Aryanpour

Numerical and Empirical Investigation on Bending Behavior of Composite Bipolar Plates for PEM Fuel Cells

Volume 55, Issue 8, November 2023, Pages 995-1008

10.22060/mej.2023.21720.7495

Leyla Emami; Mohammad Mahdi Barzegari; Mohammad Reza Zamani

Tire Hardness Modeling Based on Longitudinal Ultrasonic Velocity Using the Gaussian Process Regression

Volume 51, Issue 5, November and December 2019, Pages 1005-1016

10.22060/mej.2018.13494.5649

Abolfazl Foorginejad; Morteza Taheri; nader mollayi; mehdi shiva

Design and Optimum arrangement of a Blade Flap for Improving the Power Generation of a Horizontal Axis Wind Turbine

Volume 54, Issue 5, August 2022, Pages 1007-1028

10.22060/mej.2022.20452.7233

nima alizadeh; alireza jahangirian

Tracking control of quadrotors in the presence of obstacles based on potential field method

Volume 53, Issue 2 (Special Issue), May 2021, Pages 1095-1110

10.22060/mej.2020.17223.6541

Ali Keymasi Khalaji; iman saadat

Numerical analysis of moist-air flow in converging-diverging nozzle with equilibrium and non-equilibrium thermodynamic models

Volume 55, Issue 9, December 2023, Pages 1113-1134

10.22060/mej.2023.21836.7526

Sabah Hamidi; Mohammad J. Kermani

Experimental and Numerical Investigation of Initial Notch Radius Effect on Charpy Fracture Energy in API X65 Steel

Volume 52, Issue 5, August 2020, Pages 1139-1152

10.22060/mej.2018.14130.5804

Amir Reza Shahsavani; sayyed Hojjat Hashemi

Numerical Study of Mixed Convection Heat Transfer in a Cavity Filled with NonNewtonian Nanofluids Utilizing Two-phase Mixture Model

Volume 50, Issue 6, March and April 2019, Pages 1199-1212

10.22060/mej.2017.12504.5355

N. Hazeri-Mahmel; Y. Shekari; A. Tayebi

Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack

Volume 51, Issue 6, January and February 2020, Pages 1217-1234

10.22060/mej.2018.13945.5759

Mazaher Rahimi Esboee; Ebrahim Alizadeh; Ali Akbar Ranjbar; Seyed Majid Rahgoshay; Sayed Hossein Masrouri Saadat; Majid Khorshidian

Effect of Build Orientation and Size on the Amount of the Defects of Stainless Steel 316L Parts Made by Selective Laser Melting Process

Volume 55, Issue 10, January 2024, Pages 1219-1232

10.22060/mej.2024.22323.7630

Amjad Sazgar; Mohammad Ranjbarkohan; ali Pourkamali anaraki

Study of Nonlinear Vibration Behavior of an Electric Current-Carrying Ferromagnetic Plate in Magnetic Field

Volume 54, Issue 6, September 2022, Pages 1303-1318

10.22060/mej.2022.20221.7196

Nariman Ashrafi Khorasani; elham tahmasebi

Analytical-Numerical Investigation of Unequal Sized Droplets of Dilatants' Fluid in T-Junction with Unequal Length Branches

Volume 53, Issue 3, June 2021, Pages 1417-1438

10.22060/mej.2019.16844.6454

Ahmad Bedram

Simulation of diffusion absorption refrigeration cycle with car exhaust heat source and improving cycle performance at low engine speeds

Volume 52, Issue 6, September 2020, Pages 1429-1442

10.22060/mej.2018.14373.5845

Majid Bazargan; ramin farzadi

Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model

Volume 54, Issue 7, October 2022, Pages 1533-1552

10.22060/mej.2022.21138.7383

Mohamad Ali Modaresi; Ghassem Heidarinejad; Reza Maddahian; Bahar Firoozabadi

Investigation of Flow in Microchannels with Superhydrophobic Surfaces Using Hybrid Direct Simulation Monte Carlo-Navier-Stokes Method with Information Preservation Approach

Volume 52, Issue 7, October 2020, Pages 1741-1756

10.22060/mej.2019.15310.6093

Ali Babakhani; Ali Amiri-Jaghargh

Stability analysis of shear-thinning flow in narrow gap Taylor–Couette axial flow

Volume 53, Issue 3 (Special Issue), June 2021, Pages 1745-1766

10.22060/mej.2020.16685.6419

medi yektapour; Nariman Ashrafi Khorasani

Planar Navigation Algorithm of Magnetic Dipole Microrobot by Three External Electromagnets

Volume 54, Issue 8, November 2022, Pages 1789-1802

10.22060/mej.2022.20797.7317

Elmira Mojaver Zargar; Majid Sadedel; Mohammad Reza Karafi

The Interaction of the Shock Wave with the Bubble and the Effect of Computational Grid Size on the Problem Simulation with A Fully Coupled Pressure-Based Algorithm

Volume 54, Issue 9, December 2022, Pages 2041-2060

10.22060/mej.2022.21189.7395

Mohammad Pirani; ariya rahmani; Mohammad Reza ansari

Estimation of Stress Concentration Factor of Elliptical Cutout in the Composite Sheets under Tensile Load

Volume 52, Issue 8, November 2020, Pages 2081-2092

10.22060/mej.2019.15143.6042

Ali Abbasnia; Abbas Rohani; mohammad jafari

Amirkabir Journal of Mechanical Engineering

Journal Archive

Volume 55 (2023-2024)

Volume 54 (2022-2023)

Volume 53 (2021-2022)

Volume 52 (2020-2021)

Volume 51 (2019-2020)

Volume 50 (2018)

Volume 49 (2017)

Volume 48 (2016)

Volume 47 (2015)

Volume 46 (2014)

Volume 45 (2013)

Volume 44 (2012)

Volume 43 (2011)

Volume 42 (2010)

Volume 41 (2009)