Amirkabir Journal of Mechanical Engineering

Main Subjects = Welding

Coating of AISI 4340 low-alloy steel with austenitic stainless steels and stellite6 cobalt base by tungsten-gas arc welding method and investigation of the microstructure and wear behavior of the resulting layer

Volume 55, Issue 6, September 2023, Pages 773-794

10.22060/mej.2023.22118.7568

nasser nabavinejad; Alireza Alaei; pouya basir

Fatigue Life Estimation of In-Service Welded Patch Using Multiaxial Fatigue Criteria

Volume 54, Issue 12, March 2023, Pages 2877-2898

10.22060/mej.2022.21564.7472

sajjad Barzegar-Mohammadi; Mohammad haghpanahi; Mostafa Zeinoddini

Evaluation of Microstructure and Mechanical Properties of Dissimilar Joining of Inconel 718 Superalloy to 316 Austenitic Stainless Steel

Volume 54, Issue 12, March 2023, Pages 2917-2936

10.22060/mej.2023.21643.7482

pouya basir; Morteza Shamanian

Presenting the Traction-Separation Law for Ultrasonic Welding of Glass-Fiber Reinforced Polypropylene Composite

Volume 54, Issue 10, January 2023, Pages 2429-2456

10.22060/mej.2022.20581.7261

Reza Ahmadi; Hasan Biglari

Finite Element Simulation of the Trailing Heat Sink's Effect on Welding-Induced Distortion of Al 3105

Volume 54, Issue 8, November 2022, Pages 1945-1968

10.22060/mej.2022.21197.7399

Farshad Jafari Vidoji; Eslam Ranjbarnodeh; Seyyed Ehsan Mirsalehi

Electroplastic friction stir spot welding for joining AA6061-T6 aluminum to galvanized DP590 steel

Volume 53, Issue 6, September 2021, Pages 3733-3750

10.22060/mej.2020.18678.6876

Abozar Barimani-Varandi; Abdolhossein Jalali Aghchai

Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy

Volume 53, Issue 6, September 2021, Pages 3751-3760

10.22060/mej.2020.18746.6881

Amir Ghiasvand; Mahdi Kazemi; Maziar Mahdipour Jalilian

Statistical analysis and optimization of tensile strength of Al7075 butt joint produced by friction stir welding and submerged friction stir welding via response surface methodology and desirability approach

Volume 53, Issue 4 (Special Issue), July 2021, Pages 2719-2734

10.22060/mej.2020.18104.6735

Mahdi Vahdati; Mahmoud Moradi

Investigation of the effect of welding path on residual stresses and deformations in peripheral welding of steel pipe

Volume 53, Issue 4 (Special Issue), July 2021, Pages 2735-2750

10.22060/mej.2020.18166.6752

Mahdi Kazemi

Condition monitoring of defective single lap adhesive joint using carbon nanotubes

Volume 53, Issue 2 (Special Issue), May 2021, Pages 1321-1330

10.22060/mej.2019.16939.6479

Omid Sam Daliri; Mohammadreza Farahani

Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718

Volume 52, Issue 10, January 2021, Pages 2629-2646

10.22060/mej.2019.15630.6171

Hossein Alinaghian; Seyed Pirouz Hoveida Marashi; Ali Farzadi; Majid Pouranvari

Numerical Simulation of Laser Welding and Evaluation of Residual Stress and Temperature Distribution in Lap Joint of AA6061 and AA5086 Aluminum Alloys in Different Thicknesses

Volume 52, Issue 3, June 2020, Pages 587-604

10.22060/mej.2019.14564.5888

amir ghiasvand; Soran Hassanifard

Optimization of the Spot Weld Locations for Increasing the Joint Strength of the Welded Plates

Volume 51, Issue 5, November and December 2019, Pages 1097-1105

10.22060/mej.2018.12773.5430

davood manafi; Davood Akbari

A Coupled Finite Element Model to Study on Mechanical and Thermal Features of Resistance Spot Welding Process with Experimental Verification

Volume 51, Issue 5, November and December 2019, Pages 1147-1156

10.22060/mej.2018.13420.5638

hamed pashazadeh; Milad Rostami

Influence of Interface Morphology on the Bond Strength During the Reshaping Process of Al-Cu Bimetal Pipes

Volume 50, Issue 3, September and October 2018, Pages 467-478

10.22060/mej.2017.12161.5273

A. Tajyar; A. Masoumi

Numerical Study of Overlay Welding Effects on Residual Stresses in Girth Welded Steel Pipes

Volume 50, Issue 3, September and October 2018, Pages 479-488

10.22060/mej.2017.11934.5221

M. Hemmat zadeh; H. Moshayedi; I. Sattari-Far

Buckling Analysis on Cylindrical Shell with Longitudinal and Circumferential Welds

Volume 50, Issue 3, September and October 2018, Pages 551-560

10.22060/mej.2017.12721.5408

P. Seyedmonir; I. Sattarifar; M. Shakery

Shunting Effect in Resistance Spot Welded Joints of Aluminum Alloys

Volume 50, Issue 3, September and October 2018, Pages 561-576

10.22060/mej.2017.11619.5163

M. Jafari Vardanjani; A. Araee

Manufacturing a Single Ultrasonic Tool Set of Vibrational friction stir welding in Bending and Axial Modes

Volume 50, Issue 3, September and October 2018, Pages 601-618

10.22060/mej.2017.12587.5375

A. Rezaei Shahreza; S. Amini

Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process

Volume 49, Issue 4, March 2018, Pages 839-850

10.22060/mej.2016.728

E. Masoumi Dehaghi; A. Fallahi Arezoodar; I. Sattarifar

Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy

Volume 49, Issue 4, March 2018, Pages 863-874

10.22060/mej.2016.743

H. Samarikhalaj; A. Nikbakht; M. Sadighi; S. Sheikhan

Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V

Volume 49, Issue 2, August 2017, Pages 523-430

10.22060/mej.2016.752

J. Maleki Nejad; M. Ghoreishi; A. Khorram

Investigation of Influence of Friction Stir Welding Parameters on Formability of Aluminum Tailor Welded Blanks

Volume 48, Issue 2, September 2016, Pages 207-214

10.22060/mej.2016.501

rsoul safdariyan

Amirkabir Journal of Mechanical Engineering

Journal Archive

Volume 55 (2023-2024)

Volume 54 (2022-2023)

Volume 53 (2021-2022)

Volume 52 (2020-2021)

Volume 51 (2019-2020)

Volume 50 (2018)

Volume 49 (2017)

Volume 48 (2016)

Volume 47 (2015)

Volume 46 (2014)

Volume 45 (2013)

Volume 44 (2012)

Volume 43 (2011)

Volume 42 (2010)

Volume 41 (2009)