Abazari, Amir Musa Analysis of an Auxiliary Household Underfloor Heating and Domestic Hot Water System Using Solar Energy in a Cold Area [Volume 54, Issue 5, 2022, Pages 1081-1100]
Abbasi, sarallah Numerical Investigation of Flow Structure and Performance of Centrifugal Pump with Cavitation [Volume 54, Issue 1, 2022, Pages 55-74]
Abbasi, Yosef Enhanced Extended State Observer Based on Trajectory Linearization Control for External and Internal Disturbances [Volume 54, Issue 6, 2022, Pages 1319-1340]
Abdolkarimi, Elahe Sadat A New Direct Filtering Approach based on the Interactive Multiple Model Method in the Global Positioning System/Inertial Navigation System Integration [Volume 54, Issue 12, 2023, Pages 2725-2740]
Abdollahi Nia, Masoud Head-on Collision Avoidance Path Planning with Model Predictive Control [Volume 54, Issue 8, 2022, Pages 1737-1760]
Afkhami, Sina Numerical Simulation of Flow Separation in a Thrust Optimized Parabolic Nozzle [Volume 54, Issue 5, 2022, Pages 985-1006]
Afrasiab, Hamed Finite Element Modeling of Fluid-Solid-Piezoelectric for Investigating the Ways of Improving the Performance of the Micro Energy Harvester in the Fluid Flow [Volume 54, Issue 1, 2022, Pages 31-54]
Afshari, Ebrahim Numerical Modeling of Li-Ion Battery Temperature Control System at Low Initial Temperature [Volume 54, Issue 9, 2022, Pages 2085-2102]
Aghaei, Mohsen Geometric Optimization of Ultrasonic Fatigue Test Specimens Based on Thermo-Elastic Behavior [Volume 54, Issue 10, 2023, Pages 2399-2410]
Aghanajafi, Cyrus Simulation of the Role of the Anti-Angiogenic Therapy in Fluid Flow Behavior and Macromolecule Transport into a Heterogeneous Solid Tumor [Volume 54, Issue 7, 2022, Pages 1481-1512]
Aghareb Parast, Mohammad Sadegh Study of Fretting Fatigue Behavior of Cylinder head Aluminum Alloy, with and without nano-Clay-Particles [Volume 54, Issue 4, 2022, Pages 885-904]
Ahmadi, Habib Sliding Mode Control of Droplet Size in a Microchannel by Adjusting Syringe-Pump Flow: Experimental Study [Volume 54, Issue 10, 2023, Pages 2239-2254]
Ahmadi, Reza Presenting the Traction-Separation Law for Ultrasonic Welding of Glass-Fiber Reinforced Polypropylene Composite [Volume 54, Issue 10, 2023, Pages 2429-2456]
Ahmadi, ziaulhaq Investigation of The Surface Flame Burner Functional Diagram Using Chemiluminescence and Image Analysis [Volume 54, Issue 1, 2022, Pages 235-248]
Ahmadi Najafabadi, Mehdi Investigation of Failure Mechanism of the Composite Tubes Made by Filament Winding Process by Acoustic Emission Method [Volume 54, Issue 6, 2022, Pages 1357-1372]
Ahmadi Najafabadi, Mehdi Numerical and Experimental Investigations on Fatigue Behavior of Carbon/Epoxy Laminates Toughened by Nanofibers [Volume 54, Issue 12, 2023, Pages 2899-2916]
Ahmadpour, Ali Numerical Simulation of Convective Heat Transfer of Nano-Encapsulated Phase Change Material Slurries in Micro-Channels with Sinusoidal Cavities and Rectangular Ribs [Volume 54, Issue 1, 2022, Pages 169-188]
Akbari Alashti, Reza Finite Element Modeling of Fluid-Solid-Piezoelectric for Investigating the Ways of Improving the Performance of the Micro Energy Harvester in the Fluid Flow [Volume 54, Issue 1, 2022, Pages 31-54]
Akbarzadeh, Pooria Investigation of Electro-Osmotic Micro-Pumps Using Electrical Field Gradient and Asymmetric Micro-Electrodes: Numerical Modeling and Experimental Validation [Volume 54, Issue 1, 2022, Pages 101-122]
Alasty, Aria Experimental Cathode-Anode Flooding Diagnosis of Polymer-Electrolyte Fuel Cell of Power under 300W Using Adaptive-Neuro-Fuzzy Method [Volume 54, Issue 3, 2022, Pages 615-628]
Albooyeh, Alireza Simulation and Analysis of the First to Fourth Types of Compressed Natural Gas Tanks of Vehicles under the Explosive Loading [Volume 54, Issue 8, 2022, Pages 1895-1916]
Alibeigloo, Akbar Nonlocal Vibration of Nanobeam Embedded in Viscoelastic Pasternak Foundation with Longitudinal and Rotational Motions with Surface Effects [Volume 54, Issue 10, 2023, Pages 2215-2238]
Alikhani, Alireza Reliability Analysis of An Inertial Navigation System and its Active Fault Detection and Isolation Unit [Volume 54, Issue 4, 2022, Pages 805-820]
Alinia, Yadolah Impact Stress Analysis for the Welding Joint in a Rotary Dryer [Volume 54, Issue 12, 2023, Pages 2843-2860]
AliSadeghi, Hamed Simulation of Steady Incompressible Flow around a NACA0015 Airfoil Using Actuator Surface Method and Mass Corrected Interpolation Technique [Volume 54, Issue 5, 2022, Pages 1047-1080]
Allahverdizadeh, Firouz Enhanced Extended State Observer Based on Trajectory Linearization Control for External and Internal Disturbances [Volume 54, Issue 6, 2022, Pages 1319-1340]
Amini, Saeid Geometric Optimization of Ultrasonic Fatigue Test Specimens Based on Thermo-Elastic Behavior [Volume 54, Issue 10, 2023, Pages 2399-2410]
Amirabdollahian, Shahram Simulation and Analysis of the First to Fourth Types of Compressed Natural Gas Tanks of Vehicles under the Explosive Loading [Volume 54, Issue 8, 2022, Pages 1895-1916]
Ansari, Hamidreza Three Dimensional Design and Finite Element Analysis of Scaffold for Use in Damaged Bone Tissue [Volume 54, Issue 12, 2023, Pages 2801-2820]
Ansari, Reza Free Vibrations of Embedded Functionally Graded Graphene Platelets Reinforced Porous Nanocomposite Plates with Various Shapes Using P-Ritz Method [Volume 54, Issue 2, 2022, Pages 391-414]
Arab, Farnood Pattern Recognition of Unbalanced Rigid Rotor Bearing Forces [Volume 54, Issue 6, 2022, Pages 1249-1270]
Arhami, Mohammad Dynamic Analysis of Micro -Scale Parallelogram Flexures Using Beam Constraint Model and Modified Strain Gradient Theory [Volume 54, Issue 4, 2022, Pages 821-842]
Arianfard, Milad Clutch Position Control for an Automated Manual Transmission Using Electromechanical Actuators [Volume 54, Issue 4, 2022, Pages 769-790]
Asadi, Mahdi Analysis of an Auxiliary Household Underfloor Heating and Domestic Hot Water System Using Solar Energy in a Cold Area [Volume 54, Issue 5, 2022, Pages 1081-1100]
Asgari, Masood Numerical and Experimental Study Of Energy Absorption of Multi-Layer Aluminum-Composite Conical Frustum Structures under Axial Loading [Volume 54, Issue 8, 2022, Pages 1851-1866]
Asgari, Masood Developing an Analytical Model for Viscoelastic Anisotropic Dielectric Elastomer and Investigating the Rate Dependent Electromechanical Behavior [Volume 54, Issue 12, 2023, Pages 2781-2800]
Asgari, Nima Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
Asghari, Saeed Experimental Cathode-Anode Flooding Diagnosis of Polymer-Electrolyte Fuel Cell of Power under 300W Using Adaptive-Neuro-Fuzzy Method [Volume 54, Issue 3, 2022, Pages 615-628]
A. Shirazi, Farzad Control of a Quadrotor Equipped with Robotic Arm Based on Disturbance Estimation [Volume 54, Issue 4, 2022, Pages 747-768]
Ashrafi Khorasani, Nariman Study of Nonlinear Vibration Behavior of an Electric Current-Carrying Ferromagnetic Plate in Magnetic Field [Volume 54, Issue 6, 2022, Pages 1303-1318]
Askari, Amir Reza Investigating Bi-Stability of Pressurized Piezoelectric Micro-Plates Based on the Modified Couple Stress Theory [Volume 54, Issue 2, 2022, Pages 357-376]
Azadi, Mohammad Study of Fretting Fatigue Behavior of Cylinder head Aluminum Alloy, with and without nano-Clay-Particles [Volume 54, Issue 4, 2022, Pages 885-904]
Azadi, Mohammad Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis [Volume 54, Issue 8, 2022, Pages 1867-1894]
Azadi, Shahram Head-on Collision Avoidance Path Planning with Model Predictive Control [Volume 54, Issue 8, 2022, Pages 1737-1760]
Azizi Sormoli, Hossein Numerical Study of Microbubble Dynamics Subjected to Ultrasound and Its Effect on Thermal Ablation of Biological Tissue [Volume 54, Issue 11, 2023, Pages 2561-2582]
Azmi, Reza Designing an Optimal Non-Linear Controller for an Active Vehicle Suspension System and Investigating its Effect on Electrical Energy Harvesting [Volume 54, Issue 12, 2023, Pages 2741-2762]
B
Babaei Dooki, Maryam Numerical Simulation of Aero-Acoustic Noise from Supersonic Jet Reflection Using Computational Fluid Dynamics/Boundary Element Method [Volume 54, Issue 9, 2022, Pages 2061-2084]
Bahaadini, Reza Vibration and Stability Analysis of Micro-pipes Conveying Fluid under Magnetic, Electric, and Thermal Fields [Volume 54, Issue 8, 2022, Pages 1803-1832]
Baheri Islami, Sima Numerical Study on the Enhancement of the Thermal Efficiency of a Household Gas Water Heater and Verification with Experimental Results [Volume 54, Issue 5, 2022, Pages 1199-1220]
Bahrainian, Seyed Saied Numerical Modeling of the Effect of Inlet Temperature and Pressure on Steam Condensation and Entropy Generation in High-Pressure Separator [Volume 54, Issue 11, 2023, Pages 2601-2620]
Bahrami, Hassan Numerical Analysis of Pre-Swirl Stators for Ship Propeller [Volume 54, Issue 11, 2023, Pages 2459-2478]
Bani mohmmad Ali, Amir Investigation of Failure Mechanism of the Composite Tubes Made by Filament Winding Process by Acoustic Emission Method [Volume 54, Issue 6, 2022, Pages 1357-1372]
Bari, Iman Impact Stress Analysis for the Welding Joint in a Rotary Dryer [Volume 54, Issue 12, 2023, Pages 2843-2860]
Barzegar-Mohammadi, sajjad Fatigue Life Estimation of In-Service Welded Patch Using Multiaxial Fatigue Criteria [Volume 54, Issue 12, 2023, Pages 2877-2898]
Basiri, Shahin Energy, Exergy and Thermoeconomic Analysis of the Novel Combined Cycle of Solid Oxide Fuel Cell and Biogas Steam Reforming for Cogeneration Power and Hydrogen [Volume 54, Issue 1, 2022, Pages 211-234]
Basti, Ali Investigation on the Effect of Different Constitutive Models on the Forming Limit of the Sheet under Nonlinear Strain Path [Volume 54, Issue 4, 2022, Pages 925-944]
Basti, Ali Theoretical Analysis of the Effects of Hardening Laws, Normal and Through Thickness Shear Stresses on Forming Limit Curves of AA6016-T4 [Volume 54, Issue 6, 2022, Pages 1391-1408]
Bazargan lari, Yousef Large-Amplitude Frequency Analysis of Bi-directional Functionally Graded with Non-Uniform Porous Beams using a Higher Order Shear Deformation Theory [Volume 54, Issue 8, 2022, Pages 1761-1788]
Beigpour, Reza Numerical and Experimental Investigation on Compressive Properties of Egg Box Cores in Biodegradable Sandwich Panels [Volume 54, Issue 4, 2022, Pages 843-858]
Bigdeloo, Fatemeh Stabilization of Reduced Order Model for Convection-Diffusion Problems Based on Dynamic Mode Decomposition at High Reynolds Numbers Using Eddy Viscosity Approach [Volume 54, Issue 11, 2023, Pages 2479-2498]
Biglari, Hasan Presenting the Traction-Separation Law for Ultrasonic Welding of Glass-Fiber Reinforced Polypropylene Composite [Volume 54, Issue 10, 2023, Pages 2429-2456]
Borji, Mehdi Three-Dimensional Numerical Study of Solid Oxide Fuel Cell Performance with Converging Diverging Flow Field [Volume 54, Issue 3, 2022, Pages 589-614]
C
Chaibakhsh, Ali Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
Changizian, Maziar Numerical Modeling of the Effect of Inlet Temperature and Pressure on Steam Condensation and Entropy Generation in High-Pressure Separator [Volume 54, Issue 11, 2023, Pages 2601-2620]
D
Darabi, Armin Numerical Simulation of an Electro-Cyclone for Classification of Micron-Sized Particles [Volume 54, Issue 9, 2022, Pages 1971-1988]
Darvishnezhad, Hosein Robust Control of Integrated Reverse Osmosis Desalination System with Photovoltaic Power Supply [Volume 54, Issue 3, 2022, Pages 567-588]
Davaei Markazi, Amir Hossein Design and Implementation of Sliding Mode Control with the Modified Force for an Inverted Pendulum with Nonlinear Friction [Volume 54, Issue 12, 2023, Pages 2763-2780]
Davoodabadi Farahani, Amir Melting Process of Phase Change Materials in a Triplex-Tube: Arrangement, Newtonian and Non-Newtonian [Volume 54, Issue 5, 2022, Pages 1167-1180]
E
Ebrahimi Fordoei, Esmaeil Study of The Effect of Wall Temperature and Oxidant Structure on Temperature Distribution and NO Emission in Non-Premixed Combustion Furnace [Volume 54, Issue 1, 2022, Pages 249-266]
Eghdami, Zahra Sadat Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still [Volume 54, Issue 9, 2022, Pages 2103-2120]
Ehsani, Mohammad Uncertainty Quantification in the Assessment of the Characteristics of the Electromechanical Impedance Spectrum of a Rectangular Piezoelectric Patch [Volume 54, Issue 10, 2023, Pages 2351-2376]
Ettehadi, Hossein Simulation of Steady Incompressible Flow around a NACA0015 Airfoil Using Actuator Surface Method and Mass Corrected Interpolation Technique [Volume 54, Issue 5, 2022, Pages 1047-1080]
F
Falahatgar, Seyed Reza Investigation on the Effect of Different Constitutive Models on the Forming Limit of the Sheet under Nonlinear Strain Path [Volume 54, Issue 4, 2022, Pages 925-944]
Falahatgar, Seyed Reza Theoretical Analysis of the Effects of Hardening Laws, Normal and Through Thickness Shear Stresses on Forming Limit Curves of AA6016-T4 [Volume 54, Issue 6, 2022, Pages 1391-1408]
Fallah, Mohsen Advanced Exergy Investigation of Combined Cycle of Helium Reactor Gas Turbine with Organic Rankine Cycle [Volume 54, Issue 7, 2022, Pages 1553-1574]
Fallah, Narges Investigation of Effective Parameters on Dye Removal from Petrochemical Industry Effluents by Fenton and Electro-Fenton Methods [Volume 54, Issue 5, 2022, Pages 947-960]
FallahPour, Vahid Optimization of Carbon Fiber Reinforced Composite Grinding Process by Response Surface Method [Volume 54, Issue 2, 2022, Pages 481-490]
Farahani, Somayeh Investigating the Effect of Isothermal Channel Height on the Vibrational and Thermal Behavior of Elastically-Mounted Cylinder Affected by Unilateral and Bilateral Jet Flow [Volume 54, Issue 3, 2022, Pages 703-724]
Farahani, Somayeh Melting Process of Phase Change Materials in a Triplex-Tube: Arrangement, Newtonian and Non-Newtonian [Volume 54, Issue 5, 2022, Pages 1167-1180]
Farshi Fasih, Hamid Reza Effect of Obstacles Location and Flow Injection on the Mixing of Two-Gaseous Flow in a Microchannel [Volume 54, Issue 9, 2022, Pages 2139-2156]
Farsi, Mohammad Ali Reliability Analysis of An Inertial Navigation System and its Active Fault Detection and Isolation Unit [Volume 54, Issue 4, 2022, Pages 805-820]
Farzaneh, Hamed Multiobjective Optimization of a Tri-Generation Organic Rankine Cycle for Power, Freshwater and Heat: Suitable Mixture of Three Fluid [Volume 54, Issue 5, 2022, Pages 1125-1148]
Fatahi, Nima Simulation and Analysis of the First to Fourth Types of Compressed Natural Gas Tanks of Vehicles under the Explosive Loading [Volume 54, Issue 8, 2022, Pages 1895-1916]
Ffotouhi Ghazvini, Faranak Development of a Reduced Order Model of Geostrophic Flow based on a Combination of Proper Orthogonal Decomposition and Long-Short Term Memory Network [Volume 54, Issue 11, 2023, Pages 2583-2600]
Fili, Milad Development and Analysis of a Novel Multi-Generation System Fueled by Biogas with Smart Heat Recovery [Volume 54, Issue 7, 2022, Pages 1673-1700]
Firoozabadi, Bahar Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model [Volume 54, Issue 7, 2022, Pages 1533-1552]
Firoozi, Parham Electrical and Thermodynamic Characteristics of Non-transfer Arc and Electric Direct Current Plasma Torch with Air Working Gas [Volume 54, Issue 5, 2022, Pages 1149-1166]
Forouzi Feshalami, Abbas Simulation of a Forced Multiple Effect Brine Concentration Process [Volume 54, Issue 3, 2022, Pages 509-530]
Fouladi, Nematollah Numerical Simulation of Flow Separation in a Thrust Optimized Parabolic Nozzle [Volume 54, Issue 5, 2022, Pages 985-1006]
G
Ganjiani, Seyed Mahdi A New Method for Calculating the Fracture Strain of Shear and Notched Specimens at Various Temperature and Stress Triaxialities [Volume 54, Issue 8, 2022, Pages 1917-1932]
Ghadak, Farhad Investigation of the Aerodynamic Design Effect on Point Mass Flight Parameters in Hypersonic Glider [Volume 54, Issue 3, 2022, Pages 649-670]
Ghadimi, Mojtaba Optimization of Characteristics and Construction of Composite Bipolar Plates of Polymer Fuel Cells [Volume 54, Issue 6, 2022, Pages 1373-1390]
Ghaebi, Hadi Energy, Exergy and Thermoeconomic Analysis of the Novel Combined Cycle of Solid Oxide Fuel Cell and Biogas Steam Reforming for Cogeneration Power and Hydrogen [Volume 54, Issue 1, 2022, Pages 211-234]
Ghaebi, Hadi Development and Analysis of a Novel Multi-Generation System Fueled by Biogas with Smart Heat Recovery [Volume 54, Issue 7, 2022, Pages 1673-1700]
Ghaffari, Ali Lane Change Path Planning in Emergency Situation Based on Skilled Driver's Performance [Volume 54, Issue 2, 2022, Pages 269-288]
Ghaffari, Ali Head-on Collision Avoidance Path Planning with Model Predictive Control [Volume 54, Issue 8, 2022, Pages 1737-1760]
Ghanadi-Azar, Roozbeh Study of Fretting Fatigue Behavior of Cylinder head Aluminum Alloy, with and without nano-Clay-Particles [Volume 54, Issue 4, 2022, Pages 885-904]
Ghanbari, Roya Experimental Study of the Effect of Magnesium Oxide and Multi-Walled Carbon Nanotubes Hybrid Nanofluid on Increasing the Absorption Efficiency of Solar Radiation [Volume 54, Issue 5, 2022, Pages 1101-1124]
Ghasemi, Hassan Numerical Analysis of Pre-Swirl Stators for Ship Propeller [Volume 54, Issue 11, 2023, Pages 2459-2478]
Ghasemlooy, Sajjad Numerical Simulation of Aero-Acoustic Noise from Supersonic Jet Reflection Using Computational Fluid Dynamics/Boundary Element Method [Volume 54, Issue 9, 2022, Pages 2061-2084]
Ghavami Gargari, Saeed Energy, Exergy and Thermoeconomic Analysis of the Novel Combined Cycle of Solid Oxide Fuel Cell and Biogas Steam Reforming for Cogeneration Power and Hydrogen [Volume 54, Issue 1, 2022, Pages 211-234]
Ghazizadeh, Ali Optimization of Micro-Textured Tools Geometric Parameters in Turning of 17-4PH Stainless Steel [Volume 54, Issue 10, 2023, Pages 2411-2428]
Ghaznavi, Aidin Numerical and Experimental Study Of Energy Absorption of Multi-Layer Aluminum-Composite Conical Frustum Structures under Axial Loading [Volume 54, Issue 8, 2022, Pages 1851-1866]
Gholami, oveas Design, Modeling, and Optimal Position Control of a New Wrist Rehabilitation Robot Using the Stewart Platform [Volume 54, Issue 12, 2023, Pages 2705-2724]
Gholami, Raheb Free Vibrations of Embedded Functionally Graded Graphene Platelets Reinforced Porous Nanocomposite Plates with Various Shapes Using P-Ritz Method [Volume 54, Issue 2, 2022, Pages 391-414]
Gholampour Yazdi, Mostafa Numerical Study of Catalyst Bed Performance of a Monopropellant Thruster Under Influence of Porosity Coefficient [Volume 54, Issue 7, 2022, Pages 1607-1622]
Ghorbanbakhsh, Bahador An Experimental Investigation of Multi-Phase Flow and the Effect of Fracture on Enhanced Oil Recovery in the Porous Medium [Volume 54, Issue 11, 2023, Pages 2499-2518]
Goharkhah, Mohammad Point to Point Control of a Liquid Carrying Quadrotor [Volume 54, Issue 4, 2022, Pages 727-746]
Golzar, Mina Development of a Reduced Order Model of Geostrophic Flow based on a Combination of Proper Orthogonal Decomposition and Long-Short Term Memory Network [Volume 54, Issue 11, 2023, Pages 2583-2600]
H
Habibzadeh Sharif, Amir Designing an Optimal Non-Linear Controller for an Active Vehicle Suspension System and Investigating its Effect on Electrical Energy Harvesting [Volume 54, Issue 12, 2023, Pages 2741-2762]
Hadavi, Seyed Mohamad Mehdi Study of Rheological Behavior of Water-Ethylene Glycol /Nano Al2O3 –Nano Graphene Hybrid Nanofluid at Low Temperatures [Volume 54, Issue 4, 2022, Pages 905-924]
Hadian, Shahram Design, Manufacturing, and Test of a Wearable Device to Monitor Athlete's Body Movements [Volume 54, Issue 3, 2022, Pages 671-686]
Hadidoolabi, Mostafa Experimental Study of Aerodynamic Behavior of NACA0012 Airfoil near the Surface [Volume 54, Issue 1, 2022, Pages 123-144]
Hajmohammadi, Mohammad Reza Numerical Simulation of Convective Heat Transfer of Nano-Encapsulated Phase Change Material Slurries in Micro-Channels with Sinusoidal Cavities and Rectangular Ribs [Volume 54, Issue 1, 2022, Pages 169-188]
Halvaei, Iman Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
Hami, Masoud Numerical Investigation of Channel Cross-section Effect on the Performance of Integrated Thermoelectric Power Generator [Volume 54, Issue 9, 2022, Pages 2195-2212]
Hasanvand, Amin Analysis of an Auxiliary Household Underfloor Heating and Domestic Hot Water System Using Solar Energy in a Cold Area [Volume 54, Issue 5, 2022, Pages 1081-1100]
Hassanzadeh, Maryam Development and Analysis of a Novel Multi-Generation System Fueled by Biogas with Smart Heat Recovery [Volume 54, Issue 7, 2022, Pages 1673-1700]
Heidari, Mehran Numerical Simulation of Induced Vibrations Due to Low Frequency Flow Oscillations around Piezoelectric Blades to Design the Best Configuration for Energy Harvesting [Volume 54, Issue 9, 2022, Pages 2009-2040]
Heidarinejad, Ghassem Numerical Simulation of Compartment Fire with Flamelet Generated Manifold and Comparison with Other Combustion Models [Volume 54, Issue 3, 2022, Pages 493-508]
Heidarinejad, Ghassem Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model [Volume 54, Issue 7, 2022, Pages 1533-1552]
Heidarinejad, Ghassem Investigation of Different Internal Flows Using Different Transitional Models [Volume 54, Issue 9, 2022, Pages 1989-2008]
Heidarinejad, Ghassem Numerical Study of Microbubble Dynamics Subjected to Ultrasound and Its Effect on Thermal Ablation of Biological Tissue [Volume 54, Issue 11, 2023, Pages 2561-2582]
Heidary Sadrabady, Hossein A New Direct Filtering Approach based on the Interactive Multiple Model Method in the Global Positioning System/Inertial Navigation System Integration [Volume 54, Issue 12, 2023, Pages 2725-2740]
Hesami, Hanieh Three-Dimensional Numerical Study of Solid Oxide Fuel Cell Performance with Converging Diverging Flow Field [Volume 54, Issue 3, 2022, Pages 589-614]
Heshmati, Mahmood Investigation of Interlaminar Mode-I Fracture Toughness of Corrugated Composite Plates [Volume 54, Issue 2, 2022, Pages 415-432]
Heydari, Ali Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
Heydari, Hamed Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
Heydari, Hamed Numerical Investigation of Elastoplastic and Damage Behavior of Cortical Bone by Applying a New Damage Model [Volume 54, Issue 6, 2022, Pages 1423-1442]
Heyhat, Mohammad Mahdi Experimental Study of the Effect of Magnesium Oxide and Multi-Walled Carbon Nanotubes Hybrid Nanofluid on Increasing the Absorption Efficiency of Solar Radiation [Volume 54, Issue 5, 2022, Pages 1101-1124]
Hojaji, Mohammad Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
Homaeinezhad, Mohammad Reza Pattern Recognition of Unbalanced Rigid Rotor Bearing Forces [Volume 54, Issue 6, 2022, Pages 1249-1270]
Hoseinkhani, Behnam Design and Implementation of Sliding Mode Control with the Modified Force for an Inverted Pendulum with Nonlinear Friction [Volume 54, Issue 12, 2023, Pages 2763-2780]
Hossein, Amirhossein Investigation of the Aerodynamic Design Effect on Point Mass Flight Parameters in Hypersonic Glider [Volume 54, Issue 3, 2022, Pages 649-670]
Hosseini, Afshin Vibration and Stability Analysis of Micro-pipes Conveying Fluid under Magnetic, Electric, and Thermal Fields [Volume 54, Issue 8, 2022, Pages 1803-1832]
Hosseini, Mohammad Vibration and Stability Analysis of Micro-pipes Conveying Fluid under Magnetic, Electric, and Thermal Fields [Volume 54, Issue 8, 2022, Pages 1803-1832]
Hosseini, saied jalil Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
Hosseini, Seyed Sharafoddin Experimental Study of Thermal and Mechanical Properties of Wood Boards Processed with Hard Recycled Skin of Walnut and Pistachio [Volume 54, Issue 8, 2022, Pages 1933-1944]
Hosseini Salari, Ali Online Estimation of Tire Normal Force with Applying Hardware-Software Couple Model [Volume 54, Issue 2, 2022, Pages 333-356]
Hosseinpour, javid Enhanced Extended State Observer Based on Trajectory Linearization Control for External and Internal Disturbances [Volume 54, Issue 6, 2022, Pages 1319-1340]
Hosseinzadeh Esfahani, Farid Characterization of the Effect of Helicopter Isolated Blade Vortex on Dynamic Stall [Volume 54, Issue 1, 2022, Pages 75-100]
I
Isapour Rudy, Mohammad Statistical Analysis and Optimization of Variables Affecting the End Diameter of AISI 304 Steel Tube Produced by Flaring Process [Volume 54, Issue 12, 2023, Pages 2861-2876]
J
Jabbari, Mohsen The Effect of Graphene Nanoparticles on the Strength of the Sandwich Panel Structure Inspired by the Dragonfly Wing Vein Microstructure under Quasi-Static Loading [Volume 54, Issue 12, 2023, Pages 2821-2842]
Jafari Vidoji, Farshad Finite Element Simulation of the Trailing Heat Sink's Effect on Welding-Induced Distortion of Al 3105 [Volume 54, Issue 8, 2022, Pages 1945-1968]
Jafarkalhori, Yeganeh Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
Jamali, Ali Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
Javadi, Merdad The Effect of Graphene Nanoparticles on the Strength of the Sandwich Panel Structure Inspired by the Dragonfly Wing Vein Microstructure under Quasi-Static Loading [Volume 54, Issue 12, 2023, Pages 2821-2842]
Javaherdeh, Kourosh Thermodynamic and Exergy Economic Analysis Combined Heat Power and Cooling in a Combined Cycle with Ejector Using Solar Energy [Volume 54, Issue 3, 2022, Pages 547-566]
Jozvaziri, Mohammad Ali Investigation of the Aerodynamic Design Effect on Point Mass Flight Parameters in Hypersonic Glider [Volume 54, Issue 3, 2022, Pages 649-670]
K
Kamari, Mohammad Hussain Hybrid Position and Force Control for a Spherical Inverted Pendulum Connected to a Quadrotor in a Constrained Motion [Volume 54, Issue 10, 2023, Pages 2255-2276]
Karafi, Mohammad Reza Planar Navigation Algorithm of Magnetic Dipole Microrobot by Three External Electromagnets [Volume 54, Issue 8, 2022, Pages 1789-1802]
Karimaei, Hadiseh Numerical Study of Catalyst Bed Performance of a Monopropellant Thruster Under Influence of Porosity Coefficient [Volume 54, Issue 7, 2022, Pages 1607-1622]
Karimi, Jalal Design of Fault Tolerant Controller in Flight Control System [Volume 54, Issue 10, 2023, Pages 2297-2314]
Karimi, Mohammad Investigating the Effect of Mesh Structure and Mesh Retaining Module on the Rate of Fog Harvesting [Volume 54, Issue 7, 2022, Pages 1575-1586]
Karimian, Seyed Mohammad Hossein Characterization of the Effect of Helicopter Isolated Blade Vortex on Dynamic Stall [Volume 54, Issue 1, 2022, Pages 75-100]
Karkon, Mohammad Mixed Finite Element Formulation for 2D Problems Analysis Based on Analytical Solutions of Deferential Equation [Volume 54, Issue 6, 2022, Pages 1443-1458]
Kashaniasl, Shahram Numerical Study on the Enhancement of the Thermal Efficiency of a Household Gas Water Heater and Verification with Experimental Results [Volume 54, Issue 5, 2022, Pages 1199-1220]
Kayhani, Mohammad Hasan An Experimental Investigation of Multi-Phase Flow and the Effect of Fracture on Enhanced Oil Recovery in the Porous Medium [Volume 54, Issue 11, 2023, Pages 2499-2518]
Kayhani, Mohammad Hassan Numerical Investigation on the Fluid Elasticity Effect in the Impact of Oblique Drop onto Liquid Film [Volume 54, Issue 1, 2022, Pages 3-30]
Kermani, Mohammad J. Experimental Cathode-Anode Flooding Diagnosis of Polymer-Electrolyte Fuel Cell of Power under 300W Using Adaptive-Neuro-Fuzzy Method [Volume 54, Issue 3, 2022, Pages 615-628]
Khajehzadeh, Mohsen Experimental Study and Finite Element Simulation of Cutting Tool Temperature in Laser Assisted Machining [Volume 54, Issue 6, 2022, Pages 1341-1356]
Khalili, Mohammad Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still [Volume 54, Issue 9, 2022, Pages 2103-2120]
Khalili, Seyed Mohammad Reza Numerical and Experimental Investigation on Compressive Properties of Egg Box Cores in Biodegradable Sandwich Panels [Volume 54, Issue 4, 2022, Pages 843-858]
Khanafari, Ali Experimental Cathode-Anode Flooding Diagnosis of Polymer-Electrolyte Fuel Cell of Power under 300W Using Adaptive-Neuro-Fuzzy Method [Volume 54, Issue 3, 2022, Pages 615-628]
Khani, Mohammad Reza Electrical and Thermodynamic Characteristics of Non-transfer Arc and Electric Direct Current Plasma Torch with Air Working Gas [Volume 54, Issue 5, 2022, Pages 1149-1166]
Khani, Salman Optimization of Micro-Textured Tools Geometric Parameters in Turning of 17-4PH Stainless Steel [Volume 54, Issue 10, 2023, Pages 2411-2428]
Khoeini Poor far, Alireza Acoustic Simulation of Hot and Cold Flow mixing by a Lobed Mixer in a High Bypass Ratio Turbofan Engine [Volume 54, Issue 7, 2022, Pages 1513-1532]
Khoshgoftar, Mohammad Javad Three Dimensional Design and Finite Element Analysis of Scaffold for Use in Damaged Bone Tissue [Volume 54, Issue 12, 2023, Pages 2801-2820]
Khoshkhoo, Rouhollah Acoustic Simulation of Hot and Cold Flow mixing by a Lobed Mixer in a High Bypass Ratio Turbofan Engine [Volume 54, Issue 7, 2022, Pages 1513-1532]
Kiani Shahvandi, Mohammad Numerical Study of Therapeutic Effectiveness of Bolus Injection and Continuous Infusion on Drug Delivery to Vascularized Solid Tumor [Volume 54, Issue 11, 2023, Pages 2543-2560]
Koochakianfard, Omid Nonlocal Vibration of Nanobeam Embedded in Viscoelastic Pasternak Foundation with Longitudinal and Rotational Motions with Surface Effects [Volume 54, Issue 10, 2023, Pages 2215-2238]
Korani, Mohammad Hossein Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis [Volume 54, Issue 8, 2022, Pages 1867-1894]
Kouhikamali, Ramin Simulation of a Forced Multiple Effect Brine Concentration Process [Volume 54, Issue 3, 2022, Pages 509-530]
L
Lekzian, Elyas Effect of Obstacles Location and Flow Injection on the Mixing of Two-Gaseous Flow in a Microchannel [Volume 54, Issue 9, 2022, Pages 2139-2156]
M
Maddahian, Reza Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model [Volume 54, Issue 7, 2022, Pages 1533-1552]
Maghrebi, Mohammad Javad Experimental Investigation of Flow Rate and Concentration Effects of Graphene-Water Nanofluid and Finding the Optimal Conditions Using Taguchi Method [Volume 54, Issue 3, 2022, Pages 629-648]
Mahdizadeh soula, Ali Asghar Sliding Mode Control of Droplet Size in a Microchannel by Adjusting Syringe-Pump Flow: Experimental Study [Volume 54, Issue 10, 2023, Pages 2239-2254]
Mahmoudpour, Ebrahim The Effect of Magnetic Field and Fluid on the Primary and Secondary Frequency Response of Fluid-Conveying Carbon Nanotubes Using a Stress-Driven Nonlocal Integral Model [Volume 54, Issue 10, 2023, Pages 2315-2332]
Majidi, Marzie Developing an Analytical Model for Viscoelastic Anisotropic Dielectric Elastomer and Investigating the Rate Dependent Electromechanical Behavior [Volume 54, Issue 12, 2023, Pages 2781-2800]
Makulati, Nazila Pool Boiling Simulation on Vertical Plate with Triangular & Circular grooves [Volume 54, Issue 11, 2023, Pages 2645-2662]
Maroofiazar, Rasool Energy Harvesting from Pool Boiling Using Electromagnetic Induction: Experimental Study and Numerical Simulation [Volume 54, Issue 7, 2022, Pages 1701-1716]
Meshkat, Seyed Salar Synthesis of Carbonous Nano Adsorbents and Their Application in Methane Gas Storage [Volume 54, Issue 9, 2022, Pages 2121-2138]
Minaei, Asgar Thermal Comfort Evaluation for Naturally Ventilated Building Applying an Adaptive Model in Different Cities of Iran [Volume 54, Issue 11, 2023, Pages 2663-2680]
Mirfalah Nasiri, seyedeh Maryam Investigation on the Effect of Different Constitutive Models on the Forming Limit of the Sheet under Nonlinear Strain Path [Volume 54, Issue 4, 2022, Pages 925-944]
Mirfalah Nasiri, seyedeh Maryam Theoretical Analysis of the Effects of Hardening Laws, Normal and Through Thickness Shear Stresses on Forming Limit Curves of AA6016-T4 [Volume 54, Issue 6, 2022, Pages 1391-1408]
Mirnia, Mohammad javad Statistical Analysis and Optimization of Variables Affecting the End Diameter of AISI 304 Steel Tube Produced by Flaring Process [Volume 54, Issue 12, 2023, Pages 2861-2876]
Mirsalehi, Seyyed Ehsan Finite Element Simulation of the Trailing Heat Sink's Effect on Welding-Induced Distortion of Al 3105 [Volume 54, Issue 8, 2022, Pages 1945-1968]
Mirzaei, Mehdi Designing an Optimal Non-Linear Controller for an Active Vehicle Suspension System and Investigating its Effect on Electrical Energy Harvesting [Volume 54, Issue 12, 2023, Pages 2741-2762]
Mirzaeinejad, Hossein Online Estimation of Tire Normal Force with Applying Hardware-Software Couple Model [Volume 54, Issue 2, 2022, Pages 333-356]
Moallemi Khiavi, Negin Thermal Comfort Evaluation for Naturally Ventilated Building Applying an Adaptive Model in Different Cities of Iran [Volume 54, Issue 11, 2023, Pages 2663-2680]
Moayedi, Hesam Numerical Analysis of the Effect of Configurations of Double Rotating Cylinders on Heat Transfer Enhancement Hybrid Nanofluid Flow in a Vented Cavity [Volume 54, Issue 1, 2022, Pages 145-168]
Moayyedi, Mohammad Kazem Numerical Simulation of Induced Vibrations Due to Low Frequency Flow Oscillations around Piezoelectric Blades to Design the Best Configuration for Energy Harvesting [Volume 54, Issue 9, 2022, Pages 2009-2040]
Moayyedi, Mohammad Kazem Evaluating the fast method based on proper orthogonal decomposition for radiative heat transfer in a participating medium [Volume 54, Issue 9, 2022, Pages 2175-2174]
Moayyedi, Mohammad Kazem Stabilization of Reduced Order Model for Convection-Diffusion Problems Based on Dynamic Mode Decomposition at High Reynolds Numbers Using Eddy Viscosity Approach [Volume 54, Issue 11, 2023, Pages 2479-2498]
Moayyedi, Mohammad Kazem Development of a Reduced Order Model of Geostrophic Flow based on a Combination of Proper Orthogonal Decomposition and Long-Short Term Memory Network [Volume 54, Issue 11, 2023, Pages 2583-2600]
Mobadersani, Farrokh Numerical Investigation of Heat Transfer of Water/Nano-Encapsulated Phase Change Materials in a Cavity Including a Rotating Cylinder [Volume 54, Issue 9, 2022, Pages 2175-2194]
Modaresi, Mohamad Ali Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model [Volume 54, Issue 7, 2022, Pages 1533-1552]
Moeenfard, Hamid Dynamic Analysis of Micro -Scale Parallelogram Flexures Using Beam Constraint Model and Modified Strain Gradient Theory [Volume 54, Issue 4, 2022, Pages 821-842]
Mofidian, Vahid Numerical Investigation of Channel Cross-section Effect on the Performance of Integrated Thermoelectric Power Generator [Volume 54, Issue 9, 2022, Pages 2195-2212]
Mohammadi, Mahya Simulation of the Role of the Anti-Angiogenic Therapy in Fluid Flow Behavior and Macromolecule Transport into a Heterogeneous Solid Tumor [Volume 54, Issue 7, 2022, Pages 1481-1512]
Mohammadi, Mohammad Mostafa Experimental Investigation of Electrochemical Finishing Process Using Box-Behnken Design in Response Surface Methodology [Volume 54, Issue 6, 2022, Pages 1409-1422]
Mohammadi, Mohsen Numerical Study and Sensitivity Analysis in Tubular Heat Exchangers with Perforated Conical Rings Carrying Water-Aluminum Oxide Nanofluid [Volume 54, Issue 1, 2022, Pages 189-210]
Mohammadi, Rafat Numerical Modeling of Diaphragm Dosing Pumps with Fluid-Structure Interaction Analysis [Volume 54, Issue 7, 2022, Pages 1461-1480]
Mohammadi, Zahra Advanced Exergy Investigation of Combined Cycle of Helium Reactor Gas Turbine with Organic Rankine Cycle [Volume 54, Issue 7, 2022, Pages 1553-1574]
Mohammadjani, Maryam Investigating Bi-Stability of Pressurized Piezoelectric Micro-Plates Based on the Modified Couple Stress Theory [Volume 54, Issue 2, 2022, Pages 357-376]
Mohammad-Javad, Kazemzadeh-parsi Large-Amplitude Frequency Analysis of Bi-directional Functionally Graded with Non-Uniform Porous Beams using a Higher Order Shear Deformation Theory [Volume 54, Issue 8, 2022, Pages 1761-1788]
Mohammadzadeh, Matin Optimization of Characteristics and Construction of Composite Bipolar Plates of Polymer Fuel Cells [Volume 54, Issue 6, 2022, Pages 1373-1390]
Moharrami, Rasoul Experimental Investigation of Electrochemical Finishing Process Using Box-Behnken Design in Response Surface Methodology [Volume 54, Issue 6, 2022, Pages 1409-1422]
Mohebi, Amir Reza Investigating the Effect of Mesh Structure and Mesh Retaining Module on the Rate of Fog Harvesting [Volume 54, Issue 7, 2022, Pages 1575-1586]
Mojaver Zargar, Elmira Planar Navigation Algorithm of Magnetic Dipole Microrobot by Three External Electromagnets [Volume 54, Issue 8, 2022, Pages 1789-1802]
Mojra, Afsaneh Numerical Study of Microbubble Dynamics Subjected to Ultrasound and Its Effect on Thermal Ablation of Biological Tissue [Volume 54, Issue 11, 2023, Pages 2561-2582]
Molahamzezadeh, Ramin Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis [Volume 54, Issue 8, 2022, Pages 1867-1894]
Momenimovahed, Ali Numerical Simulation of an Electro-Cyclone for Classification of Micron-Sized Particles [Volume 54, Issue 9, 2022, Pages 1971-1988]
Mosavi, Mohammad Reza A New Direct Filtering Approach based on the Interactive Multiple Model Method in the Global Positioning System/Inertial Navigation System Integration [Volume 54, Issue 12, 2023, Pages 2725-2740]
Mousavi, Seyed Mahmoud Optimization of Carbon Fiber Reinforced Composite Grinding Process by Response Surface Method [Volume 54, Issue 2, 2022, Pages 481-490]
Mozaffarian, Mehrdad Investigating the Effect of Mesh Structure and Mesh Retaining Module on the Rate of Fog Harvesting [Volume 54, Issue 7, 2022, Pages 1575-1586]
N
Nadery, Alireza Numerical Analysis of Pre-Swirl Stators for Ship Propeller [Volume 54, Issue 11, 2023, Pages 2459-2478]
Nasiri, Mostafa Optimal laser control for cancer thermal therapy [Volume 54, Issue 10, 2023, Pages 2333-2350]
Nazari, Mohammad Mahdi The Effect of Stacking Sequence Parameters on the Vibration Behavior of Rotating Hybrid Composite Shaft [Volume 54, Issue 10, 2023, Pages 2277-2296]
Nazari, Mohsen Investigation of Electro-Osmotic Micro-Pumps Using Electrical Field Gradient and Asymmetric Micro-Electrodes: Numerical Modeling and Experimental Validation [Volume 54, Issue 1, 2022, Pages 101-122]
Nazari, Mohsen Robust Control of Integrated Reverse Osmosis Desalination System with Photovoltaic Power Supply [Volume 54, Issue 3, 2022, Pages 567-588]
Nazari, Mohsen Investigation of Unsteady Thermal Performance of Multi-Effect Desalination with Thermal Vapor Compression [Volume 54, Issue 7, 2022, Pages 1623-1646]
Nazari, Mohsen Sliding Mode Control of Droplet Size in a Microchannel by Adjusting Syringe-Pump Flow: Experimental Study [Volume 54, Issue 10, 2023, Pages 2239-2254]
Nazari, Mohsen An Experimental Investigation of Multi-Phase Flow and the Effect of Fracture on Enhanced Oil Recovery in the Porous Medium [Volume 54, Issue 11, 2023, Pages 2499-2518]
Nazari, Mostafa Investigation of Electro-Osmotic Micro-Pumps Using Electrical Field Gradient and Asymmetric Micro-Electrodes: Numerical Modeling and Experimental Validation [Volume 54, Issue 1, 2022, Pages 101-122]
Nazari, Mostafa Robust Control of Integrated Reverse Osmosis Desalination System with Photovoltaic Power Supply [Volume 54, Issue 3, 2022, Pages 567-588]
Nazari, Mostafa Investigation of Unsteady Thermal Performance of Multi-Effect Desalination with Thermal Vapor Compression [Volume 54, Issue 7, 2022, Pages 1623-1646]
Nazari, Mostafa Sliding Mode Control of Droplet Size in a Microchannel by Adjusting Syringe-Pump Flow: Experimental Study [Volume 54, Issue 10, 2023, Pages 2239-2254]
Nazemian Alaei, Mohsen A Study of the Relationships between Pressure and Deformation of Surface on Wingsuit Performance [Volume 54, Issue 11, 2023, Pages 2681-2702]
Neisy Minaee, Samir Lane Change Path Planning in Emergency Situation Based on Skilled Driver's Performance [Volume 54, Issue 2, 2022, Pages 269-288]
Nemati, Bahman Experimental Investigation of Electrochemical Finishing Process Using Box-Behnken Design in Response Surface Methodology [Volume 54, Issue 6, 2022, Pages 1409-1422]
Nemati, Milad Reliability Analysis of An Inertial Navigation System and its Active Fault Detection and Isolation Unit [Volume 54, Issue 4, 2022, Pages 805-820]
Nemati-Moghadam, Hadi Numerical Simulation of Convective Heat Transfer of Nano-Encapsulated Phase Change Material Slurries in Micro-Channels with Sinusoidal Cavities and Rectangular Ribs [Volume 54, Issue 1, 2022, Pages 169-188]
Niknam Sharak, Mohsen Evaluating the fast method based on proper orthogonal decomposition for radiative heat transfer in a participating medium [Volume 54, Issue 9, 2022, Pages 2175-2174]
Nikouei, Sayed mohammad Experimental Study and Finite Element Simulation of Cutting Tool Temperature in Laser Assisted Machining [Volume 54, Issue 6, 2022, Pages 1341-1356]
Niksefat, Reza Optimization of Micro-Textured Tools Geometric Parameters in Turning of 17-4PH Stainless Steel [Volume 54, Issue 10, 2023, Pages 2411-2428]
Norouzi, Mahmood Numerical Investigation on the Fluid Elasticity Effect in the Impact of Oblique Drop onto Liquid Film [Volume 54, Issue 1, 2022, Pages 3-30]
Norouzi, Peyman Design, Manufacturing, and Test of a Wearable Device to Monitor Athlete's Body Movements [Volume 54, Issue 3, 2022, Pages 671-686]
Nosrati, Reza Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
O
Ostadi, Amirreza A New Method for Calculating the Fracture Strain of Shear and Notched Specimens at Various Temperature and Stress Triaxialities [Volume 54, Issue 8, 2022, Pages 1917-1932]
P
Parhizkar, Hamid Characterization of the Effect of Helicopter Isolated Blade Vortex on Dynamic Stall [Volume 54, Issue 1, 2022, Pages 75-100]
Parvizian, Jamshid A New Machine Learning Method for Ball Bearing Condition Monitoring Based on Vibration Analysis [Volume 54, Issue 2, 2022, Pages 465-480]
Pasandideh Fard, Mahmood Numerical Simulation of Flow Separation in a Thrust Optimized Parabolic Nozzle [Volume 54, Issue 5, 2022, Pages 985-1006]
PasdarShahri, Hadi Numerical Simulation of Compartment Fire with Flamelet Generated Manifold and Comparison with Other Combustion Models [Volume 54, Issue 3, 2022, Pages 493-508]
Pashaei, Mohammad Hadi Finite Element Modeling of Fluid-Solid-Piezoelectric for Investigating the Ways of Improving the Performance of the Micro Energy Harvester in the Fluid Flow [Volume 54, Issue 1, 2022, Pages 31-54]
Pilevar, Omid Investigation of Unsteady Thermal Performance of Multi-Effect Desalination with Thermal Vapor Compression [Volume 54, Issue 7, 2022, Pages 1623-1646]
Pirani, Mohammad The Interaction of the Shock Wave with the Bubble and the Effect of Computational Grid Size on the Problem Simulation with A Fully Coupled Pressure-Based Algorithm [Volume 54, Issue 9, 2022, Pages 2041-2060]
R
Rabiee, Amir Hossein Investigating the Effect of Isothermal Channel Height on the Vibrational and Thermal Behavior of Elastically-Mounted Cylinder Affected by Unilateral and Bilateral Jet Flow [Volume 54, Issue 3, 2022, Pages 703-724]
Rabiee Kerahrudib, Arefe Numerical Modeling of Diaphragm Dosing Pumps with Fluid-Structure Interaction Analysis [Volume 54, Issue 7, 2022, Pages 1461-1480]
Rafee, Roholah Experimental Study on the Effect of Numbers of Waves in Vane Type Drift Eliminator on the Collection Efficiency, Pressure Drop and the Wet Cooling Tower Performance [Volume 54, Issue 3, 2022, Pages 531-546]
Rafeeyan, Mansoor Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
Rahi, Abbas The Effect of Stacking Sequence Parameters on the Vibration Behavior of Rotating Hybrid Composite Shaft [Volume 54, Issue 10, 2023, Pages 2277-2296]
Rahmani, Mohammad Computational Fluid Dynamics Analysis of Water-in-Oil Droplet Formation within a Co-Flow Channel [Volume 54, Issue 5, 2022, Pages 1029-1046]
Rahmdel, Mahdi Multiobjective Optimization of a Tri-Generation Organic Rankine Cycle for Power, Freshwater and Heat: Suitable Mixture of Three Fluid [Volume 54, Issue 5, 2022, Pages 1125-1148]
Rajabzadeh Nobakht, Amirhosein Investigation of Effective Parameters on Dye Removal from Petrochemical Industry Effluents by Fenton and Electro-Fenton Methods [Volume 54, Issue 5, 2022, Pages 947-960]
Rajaei, Zahra Modeling and Optimization of Vibration Absorber Beam Combined with Magneto-Electro-Elastic Energy Harvester [Volume 54, Issue 6, 2022, Pages 1223-1248]
Ranjbarnodeh, Eslam Finite Element Simulation of the Trailing Heat Sink's Effect on Welding-Induced Distortion of Al 3105 [Volume 54, Issue 8, 2022, Pages 1945-1968]
Rashidi, Negin Numerical Investigation of Heat Transfer of Water/Nano-Encapsulated Phase Change Materials in a Cavity Including a Rotating Cylinder [Volume 54, Issue 9, 2022, Pages 2175-2194]
Rastegarmoghaddam, Mahshad Use of Artificial Intelligence to Identify Adhesive Joints Defects by Using Ultrasonic [Volume 54, Issue 2, 2022, Pages 377-390]
Razfar, Mohammad Reza Experimental Study and Finite Element Simulation of Cutting Tool Temperature in Laser Assisted Machining [Volume 54, Issue 6, 2022, Pages 1341-1356]
Razfar, Mohammad Reza Optimization of Micro-Textured Tools Geometric Parameters in Turning of 17-4PH Stainless Steel [Volume 54, Issue 10, 2023, Pages 2411-2428]
Rekabi, Fateme Control of a Quadrotor Equipped with Robotic Arm Based on Disturbance Estimation [Volume 54, Issue 4, 2022, Pages 747-768]
Rezaeian, Mohsen Computational Modeling of Intraperitoneal Drug Delivery for the Treatment of Peritoneal Carcinomatosis [Volume 54, Issue 3, 2022, Pages 687-702]
Rezaie, Mohammad Reza Numerical Investigation on the Fluid Elasticity Effect in the Impact of Oblique Drop onto Liquid Film [Volume 54, Issue 1, 2022, Pages 3-30]
Rezapour, Javad Three-Dimensional Numerical Study of Solid Oxide Fuel Cell Performance with Converging Diverging Flow Field [Volume 54, Issue 3, 2022, Pages 589-614]
Rezazadeh, Marzieh Optimal laser control for cancer thermal therapy [Volume 54, Issue 10, 2023, Pages 2333-2350]
Rezvani, Amir Hosein Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
Rezvani Tavakol, Mahdi The Effect of Graphene Nanoparticles on the Strength of the Sandwich Panel Structure Inspired by the Dragonfly Wing Vein Microstructure under Quasi-Static Loading [Volume 54, Issue 12, 2023, Pages 2821-2842]
Roghani, Mehran Propagation of Thermomechanical Waves in Annular Disks Made of Functionally Graded Materials under Thermal Shock [Volume 54, Issue 2, 2022, Pages 433-450]
Rostami, Foruzan Computational Fluid Dynamics Analysis of Water-in-Oil Droplet Formation within a Co-Flow Channel [Volume 54, Issue 5, 2022, Pages 1029-1046]
Rouhi, Hessam Propagation of Thermomechanical Waves in Annular Disks Made of Functionally Graded Materials under Thermal Shock [Volume 54, Issue 2, 2022, Pages 433-450]
Rouhi, Hessam Buckling Analysis of Embedded Functionally Graded Graphene Platelet-Reinforced Porous Nanocomposite Plates with Various Shapes Using the P-Ritz Method [Volume 54, Issue 4, 2022, Pages 859-884]
S
Sabaghzadeghan, Farshad Stabilization of Reduced Order Model for Convection-Diffusion Problems Based on Dynamic Mode Decomposition at High Reynolds Numbers Using Eddy Viscosity Approach [Volume 54, Issue 11, 2023, Pages 2479-2498]
Saber moghadam, ALI Aerodynamic Evaluation and Modification of Tehran International Tower Section Exposed to Annual Winds [Volume 54, Issue 11, 2023, Pages 2519-2542]
Sadati, Seyed Hoseyn Experimental Study of Aerodynamic Behavior of NACA0012 Airfoil near the Surface [Volume 54, Issue 1, 2022, Pages 123-144]
Sadati, Seyed Hoseyn Design of Fault Tolerant Controller in Flight Control System [Volume 54, Issue 10, 2023, Pages 2297-2314]
Sadedel, Majid Behavior-Based Control of Mecanum Four-Wheeled Omnidirectional Robot [Volume 54, Issue 2, 2022, Pages 309-332]
Sadedel, Majid Planar Navigation Algorithm of Magnetic Dipole Microrobot by Three External Electromagnets [Volume 54, Issue 8, 2022, Pages 1789-1802]
Sadeghiyan, Mahdi Design, Manufacturing, and Test of a Wearable Device to Monitor Athlete's Body Movements [Volume 54, Issue 3, 2022, Pages 671-686]
Sadigh, Mohammad J. Control of a Quadrotor Equipped with Robotic Arm Based on Disturbance Estimation [Volume 54, Issue 4, 2022, Pages 747-768]
Sadighi, Mojtaba Uncertainty Quantification in the Assessment of the Characteristics of the Electromechanical Impedance Spectrum of a Rectangular Piezoelectric Patch [Volume 54, Issue 10, 2023, Pages 2351-2376]
Saeedi, Ali Numerical Investigation of Steam Methane Reforming over Ni- and Rh-based Catalysts to Produce Hydrogen, Syngas and Reduce Surface Coverage [Volume 54, Issue 7, 2022, Pages 1587-1606]
Saeedi, Hamid Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
Saeedifar, Milad Numerical and Experimental Investigations on Fatigue Behavior of Carbon/Epoxy Laminates Toughened by Nanofibers [Volume 54, Issue 12, 2023, Pages 2899-2916]
Saeidi Mostaghim, Mohammad Hosein Pattern Recognition of Unbalanced Rigid Rotor Bearing Forces [Volume 54, Issue 6, 2022, Pages 1249-1270]
Safari, Mahdi Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
Safavi, Seyed Alireza Investigation of 2D Melting Process within a Porous Medium Considering Local Thermal Nonequilibrium Condition in the Presence of Sinusoidal Boundary Condition by Lattice Boltzmann Method [Volume 54, Issue 5, 2022, Pages 1181-1198]
Safavinejad, Ali Evaluating the fast method based on proper orthogonal decomposition for radiative heat transfer in a participating medium [Volume 54, Issue 9, 2022, Pages 2175-2174]
Safipour, Sayed Amir Investigation of Interlaminar Mode-I Fracture Toughness of Corrugated Composite Plates [Volume 54, Issue 2, 2022, Pages 415-432]
Saghafi, Hamed Numerical and Experimental Investigations on Fatigue Behavior of Carbon/Epoxy Laminates Toughened by Nanofibers [Volume 54, Issue 12, 2023, Pages 2899-2916]
Saghafi, Hesam Numerical and Experimental Investigations on Fatigue Behavior of Carbon/Epoxy Laminates Toughened by Nanofibers [Volume 54, Issue 12, 2023, Pages 2899-2916]
Salari, Masoomeh Finite Element Modeling of Fluid-Solid-Piezoelectric for Investigating the Ways of Improving the Performance of the Micro Energy Harvester in the Fluid Flow [Volume 54, Issue 1, 2022, Pages 31-54]
Salehi, Milad Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still [Volume 54, Issue 9, 2022, Pages 2103-2120]
Salimi, Mohammadreza Numerical Study of Catalyst Bed Performance of a Monopropellant Thruster Under Influence of Porosity Coefficient [Volume 54, Issue 7, 2022, Pages 1607-1622]
Samadi, Sajjad Optimal laser control for cancer thermal therapy [Volume 54, Issue 10, 2023, Pages 2333-2350]
Sarfaraz Khabbaz, Roohollah The Effect of Stacking Sequence Parameters on the Vibration Behavior of Rotating Hybrid Composite Shaft [Volume 54, Issue 10, 2023, Pages 2277-2296]
Sarhaddi, Faramarz Multiobjective Optimization of a Tri-Generation Organic Rankine Cycle for Power, Freshwater and Heat: Suitable Mixture of Three Fluid [Volume 54, Issue 5, 2022, Pages 1125-1148]
Sayar, Hassan Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis [Volume 54, Issue 8, 2022, Pages 1867-1894]
Sazgar, Amjad Optimization of Carbon Fiber Reinforced Composite Grinding Process by Response Surface Method [Volume 54, Issue 2, 2022, Pages 481-490]
Sedghi, Omid Design of Fault Tolerant Controller in Flight Control System [Volume 54, Issue 10, 2023, Pages 2297-2314]
Sepehry, Naserodin Uncertainty Quantification in the Assessment of the Characteristics of the Electromechanical Impedance Spectrum of a Rectangular Piezoelectric Patch [Volume 54, Issue 10, 2023, Pages 2351-2376]
Seyed Mahmoudi, Seyed Mohammad Advanced Exergy Investigation of Combined Cycle of Helium Reactor Gas Turbine with Organic Rankine Cycle [Volume 54, Issue 7, 2022, Pages 1553-1574]
Shahbazi, Hamed Design, Manufacturing, and Test of a Wearable Device to Monitor Athlete's Body Movements [Volume 54, Issue 3, 2022, Pages 671-686]
Shahmardan, Mohammad Mohsen Robust Control of Integrated Reverse Osmosis Desalination System with Photovoltaic Power Supply [Volume 54, Issue 3, 2022, Pages 567-588]
Shahrjerdi, Ali Experimental Study of Thermal and Mechanical Properties of Wood Boards Processed with Hard Recycled Skin of Walnut and Pistachio [Volume 54, Issue 8, 2022, Pages 1933-1944]
Shamanian, Morteza Evaluation of Microstructure and Mechanical Properties of Dissimilar Joining of Inconel 718 Superalloy to 316 Austenitic Stainless Steel [Volume 54, Issue 12, 2023, Pages 2917-2936]
Shamshirsaz, Mahnaz Uncertainty Quantification in the Assessment of the Characteristics of the Electromechanical Impedance Spectrum of a Rectangular Piezoelectric Patch [Volume 54, Issue 10, 2023, Pages 2351-2376]
Shamsizadeh, Pedram Numerical Modeling of Li-Ion Battery Temperature Control System at Low Initial Temperature [Volume 54, Issue 9, 2022, Pages 2085-2102]
Shamsollahi, Hossein Control of a Quadrotor Equipped with Robotic Arm Based on Disturbance Estimation [Volume 54, Issue 4, 2022, Pages 747-768]
Sharifzadeh, Behshad Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
Shervani Tabar, Mohammad Taghi Numerical Study on the Enhancement of the Thermal Efficiency of a Household Gas Water Heater and Verification with Experimental Results [Volume 54, Issue 5, 2022, Pages 1199-1220]
Shokri, Babak Electrical and Thermodynamic Characteristics of Non-transfer Arc and Electric Direct Current Plasma Torch with Air Working Gas [Volume 54, Issue 5, 2022, Pages 1149-1166]
Shokrollahi, Hassan Numerical and Experimental Investigation on Compressive Properties of Egg Box Cores in Biodegradable Sandwich Panels [Volume 54, Issue 4, 2022, Pages 843-858]
Shoshtari, Alireza Modeling and Optimization of Vibration Absorber Beam Combined with Magneto-Electro-Elastic Energy Harvester [Volume 54, Issue 6, 2022, Pages 1223-1248]
Silani, Mohammad A New Machine Learning Method for Ball Bearing Condition Monitoring Based on Vibration Analysis [Volume 54, Issue 2, 2022, Pages 465-480]
Sina, Seyed Ali Nonlinear Torsional Vibrations of Axially Loaded Pretwisted Beam with Primary Resonance Excitations [Volume 54, Issue 6, 2022, Pages 1271-1302]
Soleimani, Elahe Energy, Exergy and Thermoeconomic Analysis of the Novel Combined Cycle of Solid Oxide Fuel Cell and Biogas Steam Reforming for Cogeneration Power and Hydrogen [Volume 54, Issue 1, 2022, Pages 211-234]
Soltani, Abbas Clutch Position Control for an Automated Manual Transmission Using Electromechanical Actuators [Volume 54, Issue 4, 2022, Pages 769-790]
Soltani, Ali Point to Point Control of a Liquid Carrying Quadrotor [Volume 54, Issue 4, 2022, Pages 727-746]
Soltani, Ali Hybrid Position and Force Control for a Spherical Inverted Pendulum Connected to a Quadrotor in a Constrained Motion [Volume 54, Issue 10, 2023, Pages 2255-2276]
Soltani, Majid Computational Modeling of Intraperitoneal Drug Delivery for the Treatment of Peritoneal Carcinomatosis [Volume 54, Issue 3, 2022, Pages 687-702]
Soltani, Majid Simulation of the Role of the Anti-Angiogenic Therapy in Fluid Flow Behavior and Macromolecule Transport into a Heterogeneous Solid Tumor [Volume 54, Issue 7, 2022, Pages 1481-1512]
Soltani, Majid Numerical Study of Therapeutic Effectiveness of Bolus Injection and Continuous Infusion on Drug Delivery to Vascularized Solid Tumor [Volume 54, Issue 11, 2023, Pages 2543-2560]
T
Tafazoli, Afshin Numerical and Experimental Study Of Energy Absorption of Multi-Layer Aluminum-Composite Conical Frustum Structures under Axial Loading [Volume 54, Issue 8, 2022, Pages 1851-1866]
Taghavi, Seyed Mohammad Numerical Investigation on the Fluid Elasticity Effect in the Impact of Oblique Drop onto Liquid Film [Volume 54, Issue 1, 2022, Pages 3-30]
Taghilou, Taghilou Investigation of 2D Melting Process within a Porous Medium Considering Local Thermal Nonequilibrium Condition in the Presence of Sinusoidal Boundary Condition by Lattice Boltzmann Method [Volume 54, Issue 5, 2022, Pages 1181-1198]
Taheri, Moein Investigation of the Effect of Different Friction Models On Experimental Extraction of 3D Nanomanipulation Force and Critical Time of Colon Cancer Tissue [Volume 54, Issue 4, 2022, Pages 791-804]
Taheri, Moein Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still [Volume 54, Issue 9, 2022, Pages 2103-2120]
Tahmasbi, Vahid Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
Tahmasbi, Vahid Numerical Investigation of Elastoplastic and Damage Behavior of Cortical Bone by Applying a New Damage Model [Volume 54, Issue 6, 2022, Pages 1423-1442]
Tajdani, Amin Study of The Effect of Wall Temperature and Oxidant Structure on Temperature Distribution and NO Emission in Non-Premixed Combustion Furnace [Volume 54, Issue 1, 2022, Pages 249-266]
Talebi, Shahram Pool Boiling Simulation on Vertical Plate with Triangular & Circular grooves [Volume 54, Issue 11, 2023, Pages 2645-2662]
Tavari, Tannaz Investigation of Electro-Osmotic Micro-Pumps Using Electrical Field Gradient and Asymmetric Micro-Electrodes: Numerical Modeling and Experimental Validation [Volume 54, Issue 1, 2022, Pages 101-122]
Tayebzadeh, Fatemeh Melting Process of Phase Change Materials in a Triplex-Tube: Arrangement, Newtonian and Non-Newtonian [Volume 54, Issue 5, 2022, Pages 1167-1180]
Tebyan Jahromi, Masoud Simulation of Steady Incompressible Flow around a NACA0015 Airfoil Using Actuator Surface Method and Mass Corrected Interpolation Technique [Volume 54, Issue 5, 2022, Pages 1047-1080]
Toghiani, Javad Investigation of Effective Parameters on Dye Removal from Petrochemical Industry Effluents by Fenton and Electro-Fenton Methods [Volume 54, Issue 5, 2022, Pages 947-960]
Tourajizadeh, Hami Design, Modeling, and Optimal Position Control of a New Wrist Rehabilitation Robot Using the Stewart Platform [Volume 54, Issue 12, 2023, Pages 2705-2724]
V
Vaghefi, Reza Investigation of the Effect of Porosity on Thermo-Elastoplastic Bending of Functionally Graded Plates Using 3D Meshless Radial Basis Reproducing Kernel Particle Method [Volume 54, Issue 10, 2023, Pages 2377-2398]
Vahdati, Mahdi Statistical Analysis and Optimization of Variables Affecting the End Diameter of AISI 304 Steel Tube Produced by Flaring Process [Volume 54, Issue 12, 2023, Pages 2861-2876]
Vahidi Bajestani, AmirHusain Point to Point Control of a Liquid Carrying Quadrotor [Volume 54, Issue 4, 2022, Pages 727-746]
Valipour, Mohammad Sadegh A Study of the Relationships between Pressure and Deformation of Surface on Wingsuit Performance [Volume 54, Issue 11, 2023, Pages 2681-2702]
Y
Yaghoobi, Majid Mixed Finite Element Formulation for 2D Problems Analysis Based on Analytical Solutions of Deferential Equation [Volume 54, Issue 6, 2022, Pages 1443-1458]
Yari, Morteza Numerical Study on the Enhancement of the Thermal Efficiency of a Household Gas Water Heater and Verification with Experimental Results [Volume 54, Issue 5, 2022, Pages 1199-1220]
Yarmohammad Tooski, Mahdi The Effect of Graphene Nanoparticles on the Strength of the Sandwich Panel Structure Inspired by the Dragonfly Wing Vein Microstructure under Quasi-Static Loading [Volume 54, Issue 12, 2023, Pages 2821-2842]
Yousefi, Soroush Numerical Modeling of the Effect of Inlet Temperature and Pressure on Steam Condensation and Entropy Generation in High-Pressure Separator [Volume 54, Issue 11, 2023, Pages 2601-2620]
Z
Zabetian Targhi, Mohammad Investigation of The Surface Flame Burner Functional Diagram Using Chemiluminescence and Image Analysis [Volume 54, Issue 1, 2022, Pages 235-248]
Zabetian Targhi, Mohammad Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
Zahedinejhad, parham Large-Amplitude Frequency Analysis of Bi-directional Functionally Graded with Non-Uniform Porous Beams using a Higher Order Shear Deformation Theory [Volume 54, Issue 8, 2022, Pages 1761-1788]
Zakinia, Amir Mohammad Investigating the Effect of Isothermal Channel Height on the Vibrational and Thermal Behavior of Elastically-Mounted Cylinder Affected by Unilateral and Bilateral Jet Flow [Volume 54, Issue 3, 2022, Pages 703-724]
Zakizadeh, Mahdi Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
Zangooei, Fatemeh Numerical Investigation of Steam Methane Reforming over Ni- and Rh-based Catalysts to Produce Hydrogen, Syngas and Reduce Surface Coverage [Volume 54, Issue 7, 2022, Pages 1587-1606]
Zeaei, Soroush Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
Zeinoddini, Mostafa Fatigue Life Estimation of In-Service Welded Patch Using Multiaxial Fatigue Criteria [Volume 54, Issue 12, 2023, Pages 2877-2898]
Ziyafat Doust Abed, Mohammad Buckling Analysis of Embedded Functionally Graded Graphene Platelet-Reinforced Porous Nanocomposite Plates with Various Shapes Using the P-Ritz Method [Volume 54, Issue 4, 2022, Pages 859-884]
Ziyafat Doust Abed, Mohammad Free Vibrations of Embedded Functionally Graded Graphene Platelets Reinforced Porous Nanocomposite Plates with Various Shapes Using P-Ritz Method [Volume 54, Issue 2, 2022, Pages 391-414]
Zolfaghari, Mojtaba Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
Zolfaghari, Mojtaba Numerical Investigation of Elastoplastic and Damage Behavior of Cortical Bone by Applying a New Damage Model [Volume 54, Issue 6, 2022, Pages 1423-1442]
