Author Index

A

  • Abbasalizadeh, Majid Optimal Layout of a Typical Telecommunication Center with the Help of Computational Fluid Dynamics and Artificial Neural Networks [Volume 52, Issue 11, 2021, Pages 2969-2984]
  • Abbasi, Arash Uncertainty Propagation Analysis in Free Vibration of Uncertain Composite Plate Using Stochastic Finite Element Method [Volume 52, Issue 12, 2021, Pages 3503-3520]
  • Abbasi, Kaveh Investigation on the Effect of Pressure and Radius of Contact Surface Curvature on the Friction Coefficient in Contact Surfaces of Interference Fit Joints [Volume 52, Issue 8, 2020, Pages 2123-2134]
  • Abbasian Arani, Ali Akbar Effect of Vortex Generator on a Wavy Wall Heat Exchanger Performance for Turbulent Nanofluid Flow under a Magnetic Field [Volume 52, Issue 2, 2020, Pages 493-508]
  • Abbasian Arani, Ali Akbar Analysis of the Heat Transfer in a Multilayer Living Tissue Using the Galerkin Weighted Residuals Method [Volume 52, Issue 9, 2020, Pages 2609-2626]
  • Abbasnia, Ali Estimation of Stress Concentration Factor of Elliptical Cutout in the Composite Sheets under Tensile Load [Volume 52, Issue 8, 2020, Pages 2081-2092]
  • Abbassi, Abbas Numerical Simulation of Low-Density Lipoprotein Concentration Boundary Layer in a Straight Artery and the Effects of Wall Shear Stress [Volume 52, Issue 11, 2021, Pages 3143-3154]
  • Abdolahifar, Abolfazl Aerodynamic Performance Improvement of Hybrid Darrieus-Savonius Vertical Axis Wind Turbine [Volume 52, Issue 7, 2020, Pages 1865-1884]
  • Abdolahifar, Abolfazl Aerodynamic Performance Investigation of a Vertical Axis Wind Turbine Instead of Conventional Ram Air Turbines of Airplane [Volume 52, Issue 11, 2021, Pages 2985-3000]
  • Abdolmohammadi, Masood Optimization of the Turbines Locating in the Wind Farm [Volume 52, Issue 9, 2020, Pages 2387-2402]
  • Abdolnejad, Hossein An Analytical and Experimental Study on Dynamics of Newtonian Falling Drops in Inertia Regime with Low Reynolds Numbers [Volume 52, Issue 11, 2021, Pages 3033-3044]
  • Abiri, Anna The Drag Coefficient Prediction of a Rising Bubble through a Non-Newtonian Fluid [Volume 52, Issue 4, 2020, Pages 863-880]
  • Aflakiyan, Ali Solving the Forward Kinematic Problem of Under-Constrained Cable Driven Robots for Online Control Purposes [Volume 52, Issue 1, 2020, Pages 43-56]
  • Aghaei-Ruzbahani, Milad Prediction of the Critical Buckling Load of Grid-Stiffened Composite Plates Using Vibration Correlation Technique [Volume 52, Issue 1, 2020, Pages 221-232]
  • Aghaie Khafri, Mehrdad Predicting Sheets Forming Limit Diagrams by Numerical Simulation of Nakazima and Modified Marciniak Tests [Volume 52, Issue 3, 2020, Pages 527-542]
  • Aghayari, Jafar Optimal Vibration Reduction of the Flexible Shaft-Disk-Blades System Using a Set of Nonlinear Energy Sink [Volume 52, Issue 12, 2021, Pages 3425-3444]
  • Ahmadi, Ahmad Frequency Domain Analysis of Water Hammer with Fluid-Structure Interaction in Viscoelastic pipe [Volume 52, Issue 4, 2020, Pages 985-1004]
  • Ahmadi, Habib Optimization of the Turbines Locating in the Wind Farm [Volume 52, Issue 9, 2020, Pages 2387-2402]
  • Ahmadi, Hamed Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Ahmadi, Isa Numerical Analysis of Inter-Yarn Friction Effects on the Single-Layer High-Strength Woven Fabrics under High-Velocity Impact [Volume 52, Issue 10, 2021, Pages 2899-2916]
  • Ahmadi, Seyed Ali Three-Dimensional Elastic-Plastic Deformation Analysis of Composite Sandwich Panel under Blast Loading [Volume 52, Issue 5, 2020, Pages 1079-1100]
  • Ahmadian, Mohammad Taghi Application of a Superelement in Static and Vibration Analysis of Piezoelectric Hollow Cylinders [Volume 52, Issue 5, 2020, Pages 1245-1256]
  • Ahmadian Elmi, Mohammad Geometric Optimization of Highly Conductive Inserts with Variable Thickness Embedded in a Fin [Volume 52, Issue 9, 2020, Pages 2569-2580]
  • Ahmadi-Brooghani, Seyed Yousef Numerical and Experimental Study of Energy Absorption Amount of Functionally Graded Honeycomb with Negative Stiffness Property under Quasi-Static Load [Volume 52, Issue 10, 2021, Pages 2809-2822]
  • Ahmadi Nodoushan, Afshin Investigation of Power-Law Fluid Flow through a Two-Dimensional Microchannel Based on a Couple Stress Theory-Calculation of Characteristic Length [Volume 52, Issue 7, 2020, Pages 1707-1714]
  • Akbari, Ahmad Reza Analysis of the Wear of Railway Turnouts in a Combined Method and Hardening Model [Volume 52, Issue 5, 2020, Pages 1213-1228]
  • Akbari, Babak Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless Steel Materials [Volume 52, Issue 4, 2020, Pages 1055-1076]
  • Akbari, Davood Numerical and Experimental Investigation of the Effect of Parameters in Shear Spinning Process of a Conic Sample [Volume 52, Issue 3, 2020, Pages 543-554]
  • Akbari, Javad Improving the Milling Machine Stiffness by Optimizing the Internal Stiffeners Layout and the Wall Thickness Distribution of Column [Volume 52, Issue 3, 2020, Pages 687-702]
  • Akbari, Maryam Corrosion and Vibration: Effective Factors on Orientation Changes of Porous Phase in Grey Cast Iron [Volume 52, Issue 3, 2020, Pages 703-716]
  • Akbari, Maryam Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method [Volume 52, Issue 10, 2021, Pages 2759-2778]
  • Akbarzadeh, Pooria Modelling and Experimental Investigation of the Evaporation Suppression Using Floating Covers in the Presence of Surface Flows [Volume 52, Issue 7, 2020, Pages 1193-2010]
  • Akhavan, Behnaz Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Akrami Nia, Ehsan The Effect of Curvature of Microbeam and Electrode on the Snap-Through and Pull- In Instabilities [Volume 52, Issue 8, 2020, Pages 2243-2260]
  • Alavi Lavsani, Majid Numerical Investigation of Fin Position Effect on the Forced Convection Heat Transfer Inside a Channel in Turbulent Flow [Volume 52, Issue 6, 2020, Pages 1627-1640]
  • Alemi, Minoo Impacts of Social Robots in Education and Rehabilitation of Children with Autism in Iran [Volume 52, Issue 8, 2020, Pages 2329-2354]
  • Al Havaz, Matin Effect of Steady Spanwise Blowing on the Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 52, Issue 11, 2021, Pages 3001-3014]
  • Aligolzadeh, Farid Shape Optimization of Supersonic Ejector to Enhance its Performance in Refrigeration Applications [Volume 52, Issue 6, 2020, Pages 1659-1674]
  • Alijani, Ali Derivation of Explicit Relationships in the Determination of the Natural Frequency of Euler-Bernoulli Cracked Beams on Elastic Foundation the Using Rayleigh Method [Volume 52, Issue 5, 2020, Pages 1229-1244]
  • Alinaghian, Hossein Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718 [Volume 52, Issue 10, 2021, Pages 2629-2646]
  • Alipoor, Alireza Numerical Study of the Flat Flame Burner Power Effect on the Producing Uniform Temperature Distribution in Cracking Furnaces [Volume 52, Issue 6, 2020, Pages 1379-1396]
  • Alipoor, Alireza Maps of Flame Dynamics for Premixed Lean Hydrogen-Air Combustion in a Heated Microchannel [Volume 52, Issue 9, 2020, Pages 2443-2464]
  • Alizadeh, Ebrahim Study of Temperature Distribution of H2/O2 Polymer Electrolyte Fuel Cell in Different Operating Conditions [Volume 52, Issue 6, 2020, Pages 1479-1496]
  • Alizadeh, Ebrahim Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Altaha, Seyed Mahmoud Analysis of Reflux Condensation Phenomena During small Break Loss of Coolant Accident in Bushehr Reactor [Volume 52, Issue 4, 2020, Pages 907-922]
  • Ameli Kalkhoran, Seyed Nader Investigation of Ultra-Precision Machining on Single Crystal Silicon Using Molecular Dynamics Simulation and Experiments [Volume 52, Issue 3, 2020, Pages 731-742]
  • Aminpur, Mazhar Vibration Analysis of Cable-Driven Parallel Robots to Define Critical Speeds [Volume 52, Issue 8, 2020, Pages 2317-2328]
  • Aminzadeh, Milad Modelling and Experimental Investigation of the Evaporation Suppression Using Floating Covers in the Presence of Surface Flows [Volume 52, Issue 7, 2020, Pages 1193-2010]
  • Amirabadi, Hossein Investigation and Optimization Flat Lapping Process Using Non-Dominated Sorting Genetic Algorithm II [Volume 52, Issue 3, 2020, Pages 669-686]
  • Amiri-Jaghargh, Ali Investigation of Flow in Microchannels with Superhydrophobic Surfaces Using Hybrid Direct Simulation Monte Carlo-Navier-Stokes Method with Information Preservation Approach [Volume 52, Issue 7, 2020, Pages 1741-1756]
  • Anani, Yavar Modeling of hyperelastic incompressible behavior of functionally graded material under bending load [Volume 52, Issue 8, 2020, Pages 2045-2062]
  • Anani, Yavar Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Ansari, Reza e Limit Forming on Density Dislocation of Effect T [Volume 52, Issue 10, 2021, Pages 2709-2724]
  • Ansari-asl, Abbas An Experimental Investigation on Tensile and Impact Properties of Bagasse/Polypropylene Natural Composite [Volume 52, Issue 8, 2020, Pages 2149-2160]
  • Arbabi, Ali Experimental Study and Economic Evaluation of a Cascade Solar Water Desalination Unit in Various Conditions [Volume 52, Issue 6, 2020, Pages 1513-1530]
  • Arefmanesh, Ali Experimental Study of Fluid Flow and Heat Transfer of Al2 O3 -Water Nanofluid in Helically Coiled Micro-Finned Tubes [Volume 52, Issue 2, 2020, Pages 509-524]
  • Arefmanesh, Ali Analysis of the Heat Transfer in a Multilayer Living Tissue Using the Galerkin Weighted Residuals Method [Volume 52, Issue 9, 2020, Pages 2609-2626]
  • Arvin, Hadi Control of a Piezoelectric Nano-Actuator based on Flexoelectric Size-Dependent Theory [Volume 52, Issue 1, 2020, Pages 109-126]
  • Arvin, Hadi Nonlinear Flapping-Torsional Free Vibration Analysis of Rotating Beams Considering the Coriolis Force [Volume 52, Issue 12, 2021, Pages 3445-3462]
  • Asadi Gilakejani, Hassan Failure Analysis of Glass Fiber Reinforced Plastic Pipes and Crack Inlet Opening with J-Integral Criteria Under Internal Pressure [Volume 52, Issue 5, 2020, Pages 1179-1192]
  • Asemani, S.Samaneh Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Asgari, Masood Developing a Bidirectional Evolutionary Topology Algorithm for Continuum Structures with the Objective Functions of Stiffness and Fundamental Frequency with Geometrical Symmetry Constraint [Volume 52, Issue 1, 2020, Pages 249-264]
  • Asgari, Mojtaba Ultrasonic Guided Wave-Based Inspection of Straight Seam Welded Pipes [Volume 52, Issue 10, 2021, Pages 2647-2660]
  • Atabi, Farideh Investigating the Performance of a Hybrid Desiccant Cooling System and Trombe Wall and Optimizing Wall Area in a Stable Condition [Volume 52, Issue 11, 2021, Pages 3289-3306]
  • Azadvari, Mohaddeseh Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Azari, Ahmad An Experimental Investigation of Convective Heat Transfer of Slurry Phase Change Material in a Tube with Butterfly Tube Inserts [Volume 52, Issue 6, 2020, Pages 1561-1576]
  • Azhdari, Mehrdad Numerical Investigation of Flow Field around a Mannequin Model with Airway System in an Air Conditioned Room [Volume 52, Issue 4, 2020, Pages 955-970]
  • Azizi, Alireza An Empirical Study on Dropwise Condensation Occurred on Surfaces Hydrophobized Using a Single-Step Electrodeposition [Volume 52, Issue 6, 2020, Pages 1397-1412]
  • Azizzadeh, Turaj Study on the Influence of Spacing of the Nearby Corrosion Defects on Magnetic Flux Leakage Signals [Volume 52, Issue 3, 2020, Pages 619-634]

B

  • Babakhani, Ali Investigation of Flow in Microchannels with Superhydrophobic Surfaces Using Hybrid Direct Simulation Monte Carlo-Navier-Stokes Method with Information Preservation Approach [Volume 52, Issue 7, 2020, Pages 1741-1756]
  • Baghani, Mostafa Investigation of Fatigue Crack Growth in Superelastic NiTi Alloy by Using Digital Image Correlation Method [Volume 52, Issue 5, 2020, Pages 1167-1178]
  • Baghani, Mostafa Mechanical Behavior of Temperature-Sensitive Hydrogel Considering Functionally Graded Characteristics [Volume 52, Issue 12, 2021, Pages 3583-3594]
  • Bagheri, Ahmad Transient Response of Annular Sandwich Plate with Functional Graded Core Combined with Piezoelectric Layers [Volume 52, Issue 12, 2021, Pages 3485-3502]
  • Bahramkhoo, Moharram Investigating the Performance of a Hybrid Desiccant Cooling System and Trombe Wall and Optimizing Wall Area in a Stable Condition [Volume 52, Issue 11, 2021, Pages 3289-3306]
  • Baradaran, Farzaneh Stress and Vibrational Analysis of Non-Pneumatic Tire and Study the Effect of the Spoke Curvature and Velocity on the Wheel Vibration Using Finite Element Method [Volume 52, Issue 8, 2020, Pages 2213-2230]
  • Barati, Ebrahim Numerical Study on the Effect of Blower Location on the Maximum Temperature and Spread of Smoke In Case Of Fire inside Tunnels [Volume 52, Issue 11, 2021, Pages 3241-3256]
  • Barzegari, Mohammad Mahdi A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Barzgarnezhad, mohammad Experimental Study and Economic Evaluation of a Cascade Solar Water Desalination Unit in Various Conditions [Volume 52, Issue 6, 2020, Pages 1513-1530]
  • Basti, Ali Theoretical Analysis of the Temperature and Strain Rate Effects on the Forming Limit Diagram of AA3104 [Volume 52, Issue 3, 2020, Pages 555-570]
  • Basti, Ali e Limit Forming on Density Dislocation of Effect T [Volume 52, Issue 10, 2021, Pages 2709-2724]
  • Bayat Bodaghi, Tohid Numerical and Experimental Investigation of the Effect of Parameters in Shear Spinning Process of a Conic Sample [Volume 52, Issue 3, 2020, Pages 543-554]
  • Bazargan, Majid Simulation of diffusion absorption refrigeration cycle with car exhaust heat source and improving cycle performance at low engine speeds [Volume 52, Issue 6, 2020, Pages 1429-1442]
  • Bazzazi, A Experimental Study of Foam Generation in a Microfluidic Device [Volume 52, Issue 7, 2020, Pages 1729-1740]
  • Behnia, Mohsen Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing [Volume 52, Issue 4, 2020, Pages 797-812]
  • Behyad, Reza An Artificial Neural Network Approach for Modeling and Prediction of Energy Consumption in a Seawater Greenhouse [Volume 52, Issue 2, 2020, Pages 437-452]
  • Biglari, Hamed Edgewise Vibration Reduction of a Small-Scale Wind Turbine Blade with Considering Vibration Coupling [Volume 52, Issue 8, 2020, Pages 2261-2276]
  • Bijari, Hanieh A New Index for Evaluating Thermal Sensation Based on the Principles of Non- Fourier Heat Transfer [Volume 52, Issue 9, 2020, Pages 2597-2608]
  • Boomeri, Vahid Design, Modeling and Control of a Hybrid Climbing Robot in Manipulation Mode Using Feedback Linearization Control Method [Volume 52, Issue 1, 2020, Pages 57-84]

C

  • Chitsaz, Ata Parametric Analysis and Optimization of a Trigeneration System Based on the Tubular Solid Oxide Fuel Cell [Volume 52, Issue 2, 2020, Pages 399-418]
  • Chitsaz, Ata Exergoeconomic Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with External Reformer and Dimethyl Ether [Volume 52, Issue 6, 2020, Pages 1463-1478]
  • Choopani, Yahya Optimization of Parameters Affecting Magnetic Abrasive Finishing Process Using Response Surface Method [Volume 52, Issue 10, 2021, Pages 2691-2708]
  • Choupani, NaghdAli Investigation of Fatigue Crack Growth in Superelastic NiTi Alloy by Using Digital Image Correlation Method [Volume 52, Issue 5, 2020, Pages 1167-1178]

D

  • DAEI NIAKI, SEYED OMID Simulation of the Heating, Ventilation, and Air Conditioning System with Geothermal Energy and Solar Collector [Volume 52, Issue 2, 2020, Pages 347-364]
  • Danesh Mehr, Ali Reza Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Davari, Ali R. Impact of Reduced Frequency on Pressure Distribution on the Lower Surface of a Supercritical Airfoil in Pitch-Pause-Return-Motion [Volume 52, Issue 4, 2020, Pages 971-984]
  • Davari, Ali R. Experimental Study of Inflow and Downwash Flow Fields under the Small Tandem Rotors [Volume 52, Issue 11, 2021, Pages 3071-3090]
  • Dehghan, Ali Akbar Experimental investigation of the turbulence effect of incoming flow on the unsteady pressure field and the flow noise around circular cylinder [Volume 52, Issue 4, 2020, Pages 923-942]
  • Dehghan, Ali Akbar Far-field Aeroacoustic Noise Prediction of a Tall Standard Building Model by Measuring Unsteady Surface Pressures [Volume 52, Issue 7, 2020, Pages 1885-1904]
  • Dehghan, Ali Akbar Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Dehghan Manshadi, Mojtaba Far-field Aeroacoustic Noise Prediction of a Tall Standard Building Model by Measuring Unsteady Surface Pressures [Volume 52, Issue 7, 2020, Pages 1885-1904]
  • Deldar, Saber Study of the Natural Circulation Heat Recovery Steam Generator Unsteady Behavior Using One Dimensional Model for the Evaporator Loop [Volume 52, Issue 9, 2020, Pages 2369-2386]
  • Derakhshan Houre, Shahram Experimental and Numerical Study of a Vertical Axis Tidal Current Turbine [Volume 52, Issue 4, 2020, Pages 745-768]
  • Dogonchi, A.S. Investigating the Orientation of the Heater and Cooler on the Performance of a Mini Natural Circulation Loop with Cu-Water Nanofluid [Volume 52, Issue 11, 2021, Pages 3203-3224]

E

  • Ebrahimi, Ebrahim Experimental Investigation of Cooling Performance Enhancement of a Photovoltaic Module Using a Phase Change Material-CuO Nanoparticles [Volume 52, Issue 2, 2020, Pages 281-296]
  • Ebrahimi, Esmaeil Numerical Study of the Flat Flame Burner Power Effect on the Producing Uniform Temperature Distribution in Cracking Furnaces [Volume 52, Issue 6, 2020, Pages 1379-1396]
  • Ebrahimi, Reza Investigation of the Effect of Spray Fuel Injection Pattern on Evaporation of Droplets in the Gas Turbine Pre-mixer [Volume 52, Issue 4, 2020, Pages 833-846]
  • Ebrahimi, Reza Experimental Study of Premixed Methane-Air Flame Propagation in a Closed Duct with Porous Obstacle [Volume 52, Issue 11, 2021, Pages 3225-3240]
  • Ebrahimi Fordoei, Esmaeil Chemical and Physical Effects of Carbon Dioxide Injection with Different Preheating Temperature in Flameless Combustion [Volume 52, Issue 2, 2020, Pages 311-328]
  • Ebrahimi Mamaghani, Ali On the Vibrational Analysis of Cantilevered Fluid Conveying Micro-Beams Rested on Various Elastic Foundations [Volume 52, Issue 1, 2020, Pages 3-16]
  • Ehsani, Mohammad Free and Forced Vibration Analysis of Piezoelectric Patches Based on Semi-Analytic Method of Scaled Boundary Finite Element Method [Volume 52, Issue 12, 2021, Pages 3463-3484]
  • Ehsasi, Hazhir Investigation on the Effect of Pressure and Radius of Contact Surface Curvature on the Friction Coefficient in Contact Surfaces of Interference Fit Joints [Volume 52, Issue 8, 2020, Pages 2123-2134]
  • Eivazi bagheri, Hadi A Comparative Study on the Effect of Ultrasonic Vibration on Aluminum Surface Properties in Electrical Discharge Alloying [Volume 52, Issue 3, 2020, Pages 657-668]
  • Emamian, Amin An Analytical and Experimental Study on Dynamics of Newtonian Falling Drops in Inertia Regime with Low Reynolds Numbers [Volume 52, Issue 11, 2021, Pages 3033-3044]
  • Emamifar, Armin Analysis of the Heat Transfer in a Multilayer Living Tissue Using the Galerkin Weighted Residuals Method [Volume 52, Issue 9, 2020, Pages 2609-2626]
  • Emamzadeh, Abulghasem Investigating the Performance of a Hybrid Desiccant Cooling System and Trombe Wall and Optimizing Wall Area in a Stable Condition [Volume 52, Issue 11, 2021, Pages 3289-3306]
  • Erfan Manesh, Babak Analytical Solution of the Heat Transfer in Heterogeneous Composite Conical Shells with Temperature Dependent Conduction Coefficients [Volume 52, Issue 9, 2020, Pages 2581-2596]
  • Esfahanian, Mohsen State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Esfahanian, Vahid State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Esfandyari, Mohammad Javad State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Eslami Haghighat, Z. Impact of Reduced Frequency on Pressure Distribution on the Lower Surface of a Supercritical Airfoil in Pitch-Pause-Return-Motion [Volume 52, Issue 4, 2020, Pages 971-984]
  • Esmaeili, Safa Computational Investigation of the Effects of Heat Source Position on the Performance of a Mixed Compression Supersonic Intake [Volume 52, Issue 4, 2020, Pages 1023-1036]
  • Estajloo, Mohammad Analysis of Different Heat Transfer Mechanisms Portions during Traditional Flatbreads Baking to Improve Quality of Breads and Reducing Fuel Consumption [Volume 52, Issue 11, 2021, Pages 3307-3324]
  • Ettefagh, Mir Mohammad The Effect of Anisotropic Bearings on Dynamics and Stability of the Ball-Spring Auto-balancer [Volume 52, Issue 5, 2020, Pages 1319-1332]

F

  • Faghih Khorasani, Ahmad Reza Experimental and Numerical Simulation of Fluid Flow and Inclusion Removal in the Steel Continuous Casting Tundish [Volume 52, Issue 7, 2020, Pages 1943-1954]
  • Fakhari, Vahid Edgewise Vibration Reduction of a Small-Scale Wind Turbine Blade with Considering Vibration Coupling [Volume 52, Issue 8, 2020, Pages 2261-2276]
  • Fakoor, Mahdi Uncertainty Propagation Analysis in Free Vibration of Uncertain Composite Plate Using Stochastic Finite Element Method [Volume 52, Issue 12, 2021, Pages 3503-3520]
  • Falahatgar, Seyed Reza Discrete Element Method Simulation of Crack Propagation in Brittle Coatings [Volume 52, Issue 5, 2020, Pages 1153-1166]
  • Fallah, Mohammad Reza Determination of the Flutter Instability Boundary of a Composite Wing Using Support Vector Machine [Volume 52, Issue 12, 2021, Pages 3341-3352]
  • Farhadi, Sirwan Vibration Analysis of Cable-Driven Parallel Robots to Define Critical Speeds [Volume 52, Issue 8, 2020, Pages 2317-2328]
  • Farid, Mehrdad Nonlinear Vibration and Stability Analysis of Thermally Postbuckled Double-Layered Graphene Sheet [Volume 52, Issue 8, 2020, Pages 2177-2194]
  • Farrokh, Mojtaba Determination of the Flutter Instability Boundary of a Composite Wing Using Support Vector Machine [Volume 52, Issue 12, 2021, Pages 3341-3352]
  • Farrokhi, Navid Experimental Study of the Effects of Fluid Physical Properties on Conduction Pump Performance [Volume 52, Issue 4, 2020, Pages 881-892]
  • Farzadi, Ali Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718 [Volume 52, Issue 10, 2021, Pages 2629-2646]
  • Farzi, Ali Mathematical and Artificial Neural Network Simulation of NOx Selective Catalytic Reduction in a Monolithic Reactor [Volume 52, Issue 9, 2020, Pages 2465-2478]
  • Fatouraee, Nasser Numerical Simulation of Low-Density Lipoprotein Concentration Boundary Layer in a Straight Artery and the Effects of Wall Shear Stress [Volume 52, Issue 11, 2021, Pages 3143-3154]
  • Fattahi, Moslem Influences of Viscoelasticity and Streaming Potential on Surface Reaction Kinetics in Micro reactors [Volume 52, Issue 4, 2020, Pages 893-906]
  • Firoozzadeh, Mohammad Using Polyethylene Glycol, as a Phase Change Material and Fins for the Cooling of Photovoltaic Cells of the Crystalline Type [Volume 52, Issue 6, 2020, Pages 1551-1560]
  • Fouladi, Nematollah Experimental Study of the Supersonic Exhaust Diffuser Spray Cooling System [Volume 52, Issue 7, 2020, Pages 1793-1808]
  • Fouladi, Nematollah Design and Analysis of Gas Ejector in High Altitude Test Facility [Volume 52, Issue 11, 2021, Pages 3015-3032]

G

  • Ganjiani, Seyed Mahdi Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature [Volume 52, Issue 1, 2020, Pages 265-278]
  • Ganjiani, Seyed Mahdi Investigation of Damage Growth by Measuring the Chord Modulus, Micro Hardness and Macro Hardness Variation in ST37 Steel [Volume 52, Issue 3, 2020, Pages 647-656]
  • Ganjiani, Seyed Mahdi Experimental Investigation of Fatigue Damage Development Using Microhardness and Chord Modulus Variation Methods in Stainless Steel 316L [Volume 52, Issue 10, 2021, Pages 2679-2690]
  • Gavagsaz Ghoachani, Roghayeh Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability [Volume 52, Issue 4, 2020, Pages 1005-1022]
  • Ghadam, Farzad The Drag Coefficient Prediction of a Rising Bubble through a Non-Newtonian Fluid [Volume 52, Issue 4, 2020, Pages 863-880]
  • Ghaderi, Seyed Hadi Experimental Determination of the Modified Drucker-Prager Cap Constitutive Model for 92 Percent Alumina Powder [Volume 52, Issue 10, 2021, Pages 2725-2740]
  • Ghadimi, Mojtaba A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Ghadiri, Mohammad Hosein Design and Kinematics Analysis of a Novel Cable Driven Parallel Active Joint [Volume 52, Issue 12, 2021, Pages 3397-3410]
  • Ghaedi, Mohammad Sadegh Nanovoid dynamics based on temperature dependent Young modulus and void formation energy in Nickel: a phase field study [Volume 52, Issue 12, 2021, Pages 3521-3532]
  • Ghafarian eidgahi, mohsen Modeling of the Magnetorheological Damper with Optimization Approach for Magnetic Fluid Molecular Properties [Volume 52, Issue 7, 2020, Pages 1975-1992]
  • Ghaffari, Ali Proposing a Finite Duration Cancer Treatment Using Multi-Objective Optimization [Volume 52, Issue 5, 2020, Pages 1365-1376]
  • Ghafouri, Fateme Simultaneous Optimization of a Convex Sole as a Foot and Hip Trajectory for a Biped Robot with an Ankle without an Additional Degree of Freedom [Volume 52, Issue 12, 2021, Pages 3383-3396]
  • Ghafurian, Mohammad Mustafa Experimental Study and Economic Evaluation of a Cascade Solar Water Desalination Unit in Various Conditions [Volume 52, Issue 6, 2020, Pages 1513-1530]
  • Ghasemi, Jalal Hydrodynamic Behavior of Different No-Slip Condition on the Curved Boundaries in the Lattice Boltzmann Method [Volume 52, Issue 7, 2020, Pages 1925-1942]
  • Ghasemi, M. A. Discrete Element Method Simulation of Crack Propagation in Brittle Coatings [Volume 52, Issue 5, 2020, Pages 1153-1166]
  • Ghiasi, Mahmoud Roll Dynamic Stability of an Autonomous Underwater Vehicle with a Fish-like Hull Shape [Volume 52, Issue 7, 2020, Pages 2011-2026]
  • Gholamian, Elahe Thermodynamic Analysis of Refrigerants Pairs in Two Stages Cascade Vapor Compression Refrigeration Cycle for Cooling of Telecommunications Equipment with Volume Decreasing Approach [Volume 52, Issue 2, 2020, Pages 329-346]
  • Gholami Ghale Nazeri, Siavash Effect of Vortex Generator on a Wavy Wall Heat Exchanger Performance for Turbulent Nanofluid Flow under a Magnetic Field [Volume 52, Issue 2, 2020, Pages 493-508]
  • Gorji, Hamid A Comparative Study on the Effect of Ultrasonic Vibration on Aluminum Surface Properties in Electrical Discharge Alloying [Volume 52, Issue 3, 2020, Pages 657-668]
  • Gorji, Hamid Experimental Study and Finite Element Simulation for Determining the Forming Window of 6063-O Aluminum Tube in Warm Hydroforming Process [Volume 52, Issue 3, 2020, Pages 571-586]
  • Goudarzi, Masoud Looseness Detection and Assessment of Flange Type Joints Using Vibro-Acoustic Modulation Method [Volume 52, Issue 10, 2021, Pages 2661-2678]

H

  • Habibi Siyahpoosha, Ehsan Frequency Analysis and Parametric Estimation of Bubble Formation in Vertical Column [Volume 52, Issue 7, 2020, Pages 1829-1846]
  • Habibnia, Mostafa A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Hadad Baygi, Seyed Mahdi Design of a Hybrid Adaptive Neuro-Fuzzy Inference System Proportional–Integral– Derivative Controller for Vibration Mitigation of a Structure against Earthquake [Volume 52, Issue 8, 2020, Pages 2293-2316]
  • Haghani, Seyyed Omid Numerical Study on the Effect of Blower Location on the Maximum Temperature and Spread of Smoke In Case Of Fire inside Tunnels [Volume 52, Issue 11, 2021, Pages 3241-3256]
  • Haghighi-Yazdi, Mojtaba Desired Properties of Disc in Numerical Models and Its Influence on Biomechanical Behavior of Lumbar Spine [Volume 52, Issue 1, 2020, Pages 187-202]
  • Hajdizadeh, Afra Study of Young’s Modulus and Failure Strength of Polyurethane-Based Binary Polymer Composite Structures Based on Stress-Strain Curve for Tissue Engineering Vascular Graft Application [Volume 52, Issue 12, 2021, Pages 3567-3582]
  • Hajmohammadi, Mohammad Reza Geometric Optimization of Highly Conductive Inserts with Variable Thickness Embedded in a Fin [Volume 52, Issue 9, 2020, Pages 2569-2580]
  • Hakkaki-Fard, Ali Shape Optimization of Supersonic Ejector to Enhance its Performance in Refrigeration Applications [Volume 52, Issue 6, 2020, Pages 1659-1674]
  • Hasanzadeh, Hasan Evaluation of the Impact of Fan Coil Airflow Velocity on the Micron Particles Distribution in the Human Breathing Zone [Volume 52, Issue 6, 2020, Pages 1675-1686]
  • Hasanzadeh, Mahdi Study on Performance of Sandwich Panel Structures with Honeycomb Core Subjected to Impulsive Loading [Volume 52, Issue 10, 2021, Pages 2823-2838]
  • Hashemi, Mahmoodreza Experimental and Numerical Study of a Vertical Axis Tidal Current Turbine [Volume 52, Issue 4, 2020, Pages 745-768]
  • Hashemi, Ramin Theoretical Analysis of the Temperature and Strain Rate Effects on the Forming Limit Diagram of AA3104 [Volume 52, Issue 3, 2020, Pages 555-570]
  • Hashemi, sayyed Hojjat Experimental and Numerical Investigation of Initial Notch Radius Effect on Charpy Fracture Energy in API X65 Steel [Volume 52, Issue 5, 2020, Pages 1139-1152]
  • Hashemi Nader, Farshad Modeling and Sliding Mode Control of Rotating Helical Pump [Volume 52, Issue 8, 2020, Pages 2277-2292]
  • Hasheminasab, Mohammadreza Experimental Investigation of the Influence of Polymer Electrolyte Membrane Fuel Cells Operating Conditions on Its Performance and Water Management [Volume 52, Issue 11, 2021, Pages 3257-3274]
  • Hashemitabar, Seyyed Ali Developing a CDM Based Model for Creep-Fatigue Life Assessment of a Gas Turbine Blade [Volume 52, Issue 10, 2021, Pages 2951-2966]
  • Hashemi-Tilehnoee, Mehdi Investigating the Orientation of the Heater and Cooler on the Performance of a Mini Natural Circulation Loop with Cu-Water Nanofluid [Volume 52, Issue 11, 2021, Pages 3203-3224]
  • Hassanifard, Soran Numerical Simulation of Laser Welding and Evaluation of Residual Stress and Temperature Distribution in Lap Joint of AA6061 and AA5086 Aluminum Alloys in Different Thicknesses [Volume 52, Issue 3, 2020, Pages 587-604]
  • Hedayati-Mehdiabadi, Erfan Thermoeconomic Analysis of a Double Slope Basin Solar Still Equipped to Phase Change Material and Photovoltaic Thermal Collector [Volume 52, Issue 6, 2020, Pages 1531-1550]
  • Heidari, Hamidreza Cooperative path planning for leader – follower formation of Multi UAV based on the minimum energy consumption for load transportation [Volume 52, Issue 12, 2021, Pages 3327-3340]
  • Heidarinejad, Ghassem The Importance of the Compatible Combustion and Sub-grid Scale Models on the Simulation of Large-Scale Pool Fire [Volume 52, Issue 9, 2020, Pages 2425-2442]
  • Heidarinejad, Ghassem Study of Anastomosis Obtuse Angles to Reduce Fistula Failure with Numerical Simulation [Volume 52, Issue 11, 2021, Pages 3057-3070]
  • Heshmat Ebrahim Hesari, Hossein Preparation of Polystyrene-Starch Composite by Melt Extrusion and Evaluation of its Mechanical, Thermal Biodegradation Properties [Volume 52, Issue 10, 2021, Pages 2741-2758]
  • Homayoun Fard, Milad Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature [Volume 52, Issue 1, 2020, Pages 265-278]
  • Honarvar, Farhang Ultrasonic Guided Wave-Based Inspection of Straight Seam Welded Pipes [Volume 52, Issue 10, 2021, Pages 2647-2660]
  • Honarvar, Mohammad Hadi Simultaneous Optimization of a Convex Sole as a Foot and Hip Trajectory for a Biped Robot with an Ankle without an Additional Degree of Freedom [Volume 52, Issue 12, 2021, Pages 3383-3396]
  • Honaryar, Amir Roll Dynamic Stability of an Autonomous Underwater Vehicle with a Fish-like Hull Shape [Volume 52, Issue 7, 2020, Pages 2011-2026]
  • Hoseini, S. Amirhosein Free and Forced Vibration Analysis of Kelvin-Voigt Viscoelastic Nanoplate by Using Modified Couple Stress Theory [Volume 52, Issue 1, 2020, Pages 173-186]
  • Hoseini Sarvari, Seyed Masoud Simultaneously Reconstruction of Radiation-Conduction Properties of Nanomaterial Thermal Insulators with Particle Swarm Optimization Algorithm [Volume 52, Issue 9, 2020, Pages 2551-2568]
  • Hosseini, Mohammad Natural Frequency Analysis of Rotating Thin-Walled Beams with Embedded Shape Memory Alloy Wires Subjected to Uniform Temperature Field [Volume 52, Issue 1, 2020, Pages 127-140]
  • Hosseini, mojtaba Impact of Flow around Annular Fins on their Thermal Stresses and Strains [Volume 52, Issue 1, 2020, Pages 203-220]
  • Hosseini, Rouhollah Experimental and Numerical Investigation of Width Reduction Effect on the Output Power of Piezoelectric Energy Harvester Beam [Volume 52, Issue 5, 2020, Pages 1257-1272]
  • Hosseini, Rouhollah Experimental and Numerical Investigation into the Effect of Core Density on the Energy Absorption of Sandwich Panels with Aluminum Face Sheets and Polyurethane Foam Core [Volume 52, Issue 10, 2021, Pages 2839-2858]
  • Hosseini, Seyed Ali Asghar Vibrations Analysis of a Rotor Supported by Tilting-Pad Journal Bearings with Considering of Geometric Nonlinearity [Volume 52, Issue 1, 2020, Pages 141-154]
  • Hosseini, Seyed Amirreza The Effect of Surface Types on Bubble Dynamic Formation During Nucleate Pool Boiling by Use of Lee and Tanasawa Phase Change Models [Volume 52, Issue 9, 2020, Pages 2521-2536]
  • Hosseini, Seyed Vahid Experimental Determination of the Modified Drucker-Prager Cap Constitutive Model for 92 Percent Alumina Powder [Volume 52, Issue 10, 2021, Pages 2725-2740]
  • Hosseini Chaleshtari, Shahram Modeling of hyperelastic incompressible behavior of functionally graded material under bending load [Volume 52, Issue 8, 2020, Pages 2045-2062]
  • Hosseini Monazzah, Asal Corrosion and Vibration: Effective Factors on Orientation Changes of Porous Phase in Grey Cast Iron [Volume 52, Issue 3, 2020, Pages 703-716]
  • Hosseini Monazzah, Asal Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method [Volume 52, Issue 10, 2021, Pages 2759-2778]
  • Hosseinipour, Seyed Jamal Experimental Study and Finite Element Simulation for Determining the Forming Window of 6063-O Aluminum Tube in Warm Hydroforming Process [Volume 52, Issue 3, 2020, Pages 571-586]
  • Hoveida Marashi, Seyed Pirouz Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718 [Volume 52, Issue 10, 2021, Pages 2629-2646]

I

  • Izadi, Iman Design of Three-dimensional Robust Guidance Law Using Adaptive Dynamic Programming with Input Saturation Constraint [Volume 52, Issue 12, 2021, Pages 3411-3424]
  • Izadi, Omid Experimental and Simulation Study on the Warpage of Polyamide 6 Based on Thermo Mechanical Behavior of Material Using Uniaxial Tensile Test [Volume 52, Issue 5, 2020, Pages 1127-1138]
  • Izadpanah, Ehsan Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]

J

  • Jaamialahmadi, Abdolrahman Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Jafari, Azadeh Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Jafari, Moharram Experimental Study of the Effects of Fluid Physical Properties on Conduction Pump Performance [Volume 52, Issue 4, 2020, Pages 881-892]
  • Jafarian, Ali Study of the Natural Circulation Heat Recovery Steam Generator Unsteady Behavior Using One Dimensional Model for the Evaporator Loop [Volume 52, Issue 9, 2020, Pages 2369-2386]
  • Jafarmadar, Samad Parametric Analysis and Optimization of a Trigeneration System Based on the Tubular Solid Oxide Fuel Cell [Volume 52, Issue 2, 2020, Pages 399-418]
  • Jafarmadar, Samad The Thermodynamic Analysis of New Combined Cycle Using Sabalan Geothermal Wells and Liquefied Natural Gas Cold EnergyThe Thermodynamic Analysis of New Combined Cycle Using Sabalan Geothermal Wells and Liquefied Natural Gas Cold Energy [Volume 52, Issue 6, 2020, Pages 1413-1428]
  • Jafarmadar, Samad Exergoeconomic Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with External Reformer and Dimethyl Ether [Volume 52, Issue 6, 2020, Pages 1463-1478]
  • Jafarmadar, Samad Numerical Simulation of Flow, Natural Convection and Distribution of Nano Particles inside Trapezoidal Cavity using Buongiorno’s Model [Volume 52, Issue 9, 2020, Pages 2537-2550]
  • Jalalian Sedaghati, Shima Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless Steel Materials [Volume 52, Issue 4, 2020, Pages 1055-1076]
  • Jalili Bahabadi, Mohammad Mahdi Simultaneous Optimization of a Convex Sole as a Foot and Hip Trajectory for a Biped Robot with an Ankle without an Additional Degree of Freedom [Volume 52, Issue 12, 2021, Pages 3383-3396]
  • Jamali, Ali Single and Multi-objective Optimal Control Design by Genetic Programming and Comparison with Riccati Equation Solutions [Volume 52, Issue 12, 2021, Pages 3369-3382]
  • Jamekhorshid, Ahmad An Experimental Investigation of Convective Heat Transfer of Slurry Phase Change Material in a Tube with Butterfly Tube Inserts [Volume 52, Issue 6, 2020, Pages 1561-1576]
  • Jamshidian, Mostafa A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems [Volume 52, Issue 7, 2020, Pages 1905-1924]
  • Javadi, Saeed Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Javaherdeh, Kourosh Investigating the Performance of a Hybrid Desiccant Cooling System and Trombe Wall and Optimizing Wall Area in a Stable Condition [Volume 52, Issue 11, 2021, Pages 3289-3306]
  • Javaherdeh, Kourosh A Novel Biomass-Driven Cogeneration System for Zero-Energy Buildings [Volume 52, Issue 6, 2020, Pages 1443-1462]
  • Javanbakht, Mahdi Nanovoid dynamics based on temperature dependent Young modulus and void formation energy in Nickel: a phase field study [Volume 52, Issue 12, 2021, Pages 3521-3532]
  • Jirofti, Nafiseh Study of Young’s Modulus and Failure Strength of Polyurethane-Based Binary Polymer Composite Structures Based on Stress-Strain Curve for Tissue Engineering Vascular Graft Application [Volume 52, Issue 12, 2021, Pages 3567-3582]
  • Jodat, Amin An Experimental Assessment on the Effects of Forced, Free and Mixed Convection Regimes on the Water Evaporation Rate in Surface Gravity Waves [Volume 52, Issue 2, 2020, Pages 453-464]

K

  • Kadkhodapour, Javad Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Kahhal, Parviz An Experimental Investigation on Tensile and Impact Properties of Bagasse/Polypropylene Natural Composite [Volume 52, Issue 8, 2020, Pages 2149-2160]
  • Kakavand, Farshad Buckling Analysis of Truncated Conical Sandwich Panel with Porous Functionally Graded Core in Different Thermal Conditions [Volume 52, Issue 10, 2021, Pages 2859-2878]
  • Kalhor, Ahmad Solving the Forward Kinematic Problem of Under-Constrained Cable Driven Robots for Online Control Purposes [Volume 52, Issue 1, 2020, Pages 43-56]
  • Karamad, Hossien Prediction and Control of Chaos in Nonlinear Rectangular Micro-Plate on the Elastic Foundation [Volume 52, Issue 5, 2020, Pages 1285-1300]
  • Karami, Fatemeh Investigation of Power-Law Fluid Flow through a Two-Dimensional Microchannel Based on a Couple Stress Theory-Calculation of Characteristic Length [Volume 52, Issue 7, 2020, Pages 1707-1714]
  • Karami, Malihe Performance Analysis of a Building Heating System using Underground Source Heat Pump and Photovoltaic Thermal Collector [Volume 52, Issue 9, 2020, Pages 2403-2424]
  • Karbasizadeh, Nima Solving the Forward Kinematic Problem of Under-Constrained Cable Driven Robots for Online Control Purposes [Volume 52, Issue 1, 2020, Pages 43-56]
  • Karimi, Moien Performance Analyzing of an Inverted Absorber Basin Solar Still Equipped with Photovoltaic Cells [Volume 52, Issue 2, 2020, Pages 297-310]
  • Karimi, Safoora The Drag Coefficient Prediction of a Rising Bubble through a Non-Newtonian Fluid [Volume 52, Issue 4, 2020, Pages 863-880]
  • Karimian, S.M.H Aerodynamic Performance Improvement of Hybrid Darrieus-Savonius Vertical Axis Wind Turbine [Volume 52, Issue 7, 2020, Pages 1865-1884]
  • Karimian, S.M.H Aerodynamic Performance Investigation of a Vertical Axis Wind Turbine Instead of Conventional Ram Air Turbines of Airplane [Volume 52, Issue 11, 2021, Pages 2985-3000]
  • Karimian Aliabadi, Hamed Frequency Domain Analysis of Water Hammer with Fluid-Structure Interaction in Viscoelastic pipe [Volume 52, Issue 4, 2020, Pages 985-1004]
  • Karimian Aliabadi, Saeed The Study of the Effect of Floating Platform Rotational Disturbance on theAerodynamic Performance of Offshore Wind Turbine in the Presence of Pitch Control System [Volume 52, Issue 4, 2020, Pages 769-784]
  • Karsaz, Ali Design of a Hybrid Adaptive Neuro-Fuzzy Inference System Proportional–Integral– Derivative Controller for Vibration Mitigation of a Structure against Earthquake [Volume 52, Issue 8, 2020, Pages 2293-2316]
  • Kashfi, Mohammad An Experimental Investigation on Tensile and Impact Properties of Bagasse/Polypropylene Natural Composite [Volume 52, Issue 8, 2020, Pages 2149-2160]
  • Kashi, Mahdi Experimental Investigation and Visualization of Flow Boiling Heat Transfer in a Vertical Tube Containing Metal Porous Medium [Volume 52, Issue 6, 2020, Pages 1595-1612]
  • Kashi Parpinchi, Mohsen Optimization and Thermodynamic Analysis of the Dual Mixed Refrigerant Process of the Natural Gas Liquefaction [Volume 52, Issue 9, 2020, Pages 2357-2368]
  • Katanchi, Babak Investigation of Fatigue Crack Growth in Superelastic NiTi Alloy by Using Digital Image Correlation Method [Volume 52, Issue 5, 2020, Pages 1167-1178]
  • Kaveh, Reza Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Microchannel with Curved Stirrer by Lattice Boltzmann Method [Volume 52, Issue 11, 2021, Pages 3187-3202]
  • Kayhani, MH Experimental Study of Foam Generation in a Microfluidic Device [Volume 52, Issue 7, 2020, Pages 1729-1740]
  • Kayhani, Mohammad Hasan Experimental Study of Premixed Methane-Air Flame Propagation in a Closed Duct with Porous Obstacle [Volume 52, Issue 11, 2021, Pages 3225-3240]
  • Kazemi, Seyed Saied Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature [Volume 52, Issue 1, 2020, Pages 265-278]
  • Kazemi Fard, Ahmad Investigation of the Effect of Spray Fuel Injection Pattern on Evaporation of Droplets in the Gas Turbine Pre-mixer [Volume 52, Issue 4, 2020, Pages 833-846]
  • Keramat, Alireza Frequency Domain Analysis of Water Hammer with Fluid-Structure Interaction in Viscoelastic pipe [Volume 52, Issue 4, 2020, Pages 985-1004]
  • Kermani, Ali M. Study of Mechanical-Biosystemic Complications of Mazut and New Methods to Reduce Pollutants in Iranshahr Power Plant [Volume 52, Issue 2, 2020, Pages 419-436]
  • Kermani, Mohammad J. Investigation of the Effect of Anode Fuel Contaminants on the Performance of Polymer Electrolyte Membrane Fuel Cell [Volume 52, Issue 2, 2020, Pages 381-398]
  • Kermani, Mohammad J. Experimental Investigation of the Influence of Polymer Electrolyte Membrane Fuel Cells Operating Conditions on Its Performance and Water Management [Volume 52, Issue 11, 2021, Pages 3257-3274]
  • Keshavarzpour, Hemad Nonlocal Analysis of Chaotic Vibration, Primary and Super-Harmonic Resonance of Single Walled Carbon Nanotube Considering Thermal Effects [Volume 52, Issue 1, 2020, Pages 233-248]
  • Keshtkar, Mohammad Mehdi Thermodynamic Analysis of Refrigerants Pairs in Two Stages Cascade Vapor Compression Refrigeration Cycle for Cooling of Telecommunications Equipment with Volume Decreasing Approach [Volume 52, Issue 2, 2020, Pages 329-346]
  • Khadarahmi, Hossein Experimental and Numerical Investigation into the Effect of Core Density on the Energy Absorption of Sandwich Panels with Aluminum Face Sheets and Polyurethane Foam Core [Volume 52, Issue 10, 2021, Pages 2839-2858]
  • Khadembashi, Mozhde Damping Modeling in Dual Axis Torsion Micro-Actuators Considering the Bending of the Supporting Beams [Volume 52, Issue 8, 2020, Pages 2161-2176]
  • Khajehdezfuly, Amin Effects of Position and Shape of Cutout on the Axial Buckling Load of Composite Cylindrical Panel [Volume 52, Issue 10, 2021, Pages 2879-2898]
  • Khajehzadeh, Mohsen Optimization of Parameters Affecting Magnetic Abrasive Finishing Process Using Response Surface Method [Volume 52, Issue 10, 2021, Pages 2691-2708]
  • Khalati, Parvaneh Mathematical and Artificial Neural Network Simulation of NOx Selective Catalytic Reduction in a Monolithic Reactor [Volume 52, Issue 9, 2020, Pages 2465-2478]
  • Khaledi, Hiwa Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing [Volume 52, Issue 4, 2020, Pages 797-812]
  • Khaleghi, Hassan Investigation of the Effect of Spray Fuel Injection Pattern on Evaporation of Droplets in the Gas Turbine Pre-mixer [Volume 52, Issue 4, 2020, Pages 833-846]
  • Khalil-Allafi, Jafar Investigation of Fatigue Crack Growth in Superelastic NiTi Alloy by Using Digital Image Correlation Method [Volume 52, Issue 5, 2020, Pages 1167-1178]
  • Khalilarya, Shahram Parametric Analysis and Optimization of a Trigeneration System Based on the Tubular Solid Oxide Fuel Cell [Volume 52, Issue 2, 2020, Pages 399-418]
  • Khalilarya, Shahram The Thermodynamic Analysis of New Combined Cycle Using Sabalan Geothermal Wells and Liquefied Natural Gas Cold EnergyThe Thermodynamic Analysis of New Combined Cycle Using Sabalan Geothermal Wells and Liquefied Natural Gas Cold Energy [Volume 52, Issue 6, 2020, Pages 1413-1428]
  • Khalilarya, Shahram Exergoeconomic Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with External Reformer and Dimethyl Ether [Volume 52, Issue 6, 2020, Pages 1463-1478]
  • Khalilarya, Shahram Numerical Simulation of Flow, Natural Convection and Distribution of Nano Particles inside Trapezoidal Cavity using Buongiorno’s Model [Volume 52, Issue 9, 2020, Pages 2537-2550]
  • Khanaki, Mansour Optimization and Thermodynamic Analysis of the Dual Mixed Refrigerant Process of the Natural Gas Liquefaction [Volume 52, Issue 9, 2020, Pages 2357-2368]
  • Khan Kalantari, saeid Design of Three-dimensional Robust Guidance Law Using Adaptive Dynamic Programming with Input Saturation Constraint [Volume 52, Issue 12, 2021, Pages 3411-3424]
  • Khanpour, Reza Simulation of the Liquid Spraying Process in the Dripping Mode by Using the Level- Set Method [Volume 52, Issue 4, 2020, Pages 847-862]
  • Khavasi, Ehsan Analysis and Simulation of Surge Phenomena in the First Stage of Axial Compressor of GE-frame 6 Gas Turbine [Volume 52, Issue 4, 2020, Pages 785-796]
  • Khavasi, Ehsan Numerical Simulation of Three-Dimensional and Bi-Disperse Particle-Laden Turbidity Current in an Experimental Channel in the Presence of an Obstacle [Volume 52, Issue 7, 2020, Pages 1955-1974]
  • Khodabakhshi, Amir Failure Analysis of Glass Fiber Reinforced Plastic Pipes and Crack Inlet Opening with J-Integral Criteria Under Internal Pressure [Volume 52, Issue 5, 2020, Pages 1179-1192]
  • Khodadadi, Amin Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Khodsiani, Mohammadhassan Experimental Investigation of the Influence of Polymer Electrolyte Membrane Fuel Cells Operating Conditions on Its Performance and Water Management [Volume 52, Issue 11, 2021, Pages 3257-3274]
  • Khomami Abadi, Morteza Derivation of Explicit Relationships in the Determination of the Natural Frequency of Euler-Bernoulli Cracked Beams on Elastic Foundation the Using Rayleigh Method [Volume 52, Issue 5, 2020, Pages 1229-1244]
  • Khondabi, Reza Experimental and Numerical Investigation into the Effect of Core Density on the Energy Absorption of Sandwich Panels with Aluminum Face Sheets and Polyurethane Foam Core [Volume 52, Issue 10, 2021, Pages 2839-2858]
  • Khoogar, AhmadReza Kinetostatic Performance Comparison of Spherical Parallel Mechanisms Extracted from Type Synthesis with Modeling Clearance in Passive Joints [Volume 52, Issue 5, 2020, Pages 1301-1318]
  • Khosroabadi, Hassan Comparing Cooling and Lubricating Effects of Different Cutting Fluid Applications in Micromilling Process [Volume 52, Issue 3, 2020, Pages 605-618]
  • Khosroanjom, Mehdi Experimental Study of the Supersonic Exhaust Diffuser Spray Cooling System [Volume 52, Issue 7, 2020, Pages 1793-1808]
  • Kiaee, Hossein Cooperative path planning for leader – follower formation of Multi UAV based on the minimum energy consumption for load transportation [Volume 52, Issue 12, 2021, Pages 3327-3340]
  • Kianifar, Ali Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Kolahdooz, Habib Experimental Study of Premixed Methane-Air Flame Propagation in a Closed Duct with Porous Obstacle [Volume 52, Issue 11, 2021, Pages 3225-3240]
  • Kouhi Kamali, Ramin The Effect of Surface Types on Bubble Dynamic Formation During Nucleate Pool Boiling by Use of Lee and Tanasawa Phase Change Models [Volume 52, Issue 9, 2020, Pages 2521-2536]
  • Kouravand, Shahriar Study of Mechanical-Biosystemic Complications of Mazut and New Methods to Reduce Pollutants in Iranshahr Power Plant [Volume 52, Issue 2, 2020, Pages 419-436]

L

  • Liaghat, gholamhossein Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Livani, Mostafa Free Vibration Analysis of Doubly Curved Composite Sandwich Panels with Variable Thickness [Volume 52, Issue 8, 2020, Pages 2195-2212]

M

  • Madadi, Ali Design and Analysis of Gas Ejector in High Altitude Test Facility [Volume 52, Issue 11, 2021, Pages 3015-3032]
  • Madadi, Ali Optimization of S-Shaped Inlet Diffuser for Improvement of Total Pressure Loss and Flow Uniformity [Volume 52, Issue 11, 2021, Pages 3171-3186]
  • Mahdavi keshavar, Omid Study of the Natural Circulation Heat Recovery Steam Generator Unsteady Behavior Using One Dimensional Model for the Evaporator Loop [Volume 52, Issue 9, 2020, Pages 2369-2386]
  • MahmoudiMehr, Javad A Novel Biomass-Driven Cogeneration System for Zero-Energy Buildings [Volume 52, Issue 6, 2020, Pages 1443-1462]
  • Majidi Mozafari, Kazem Natural Frequency Analysis of Rotating Thin-Walled Beams with Embedded Shape Memory Alloy Wires Subjected to Uniform Temperature Field [Volume 52, Issue 1, 2020, Pages 127-140]
  • Maleki, Ali Three-Dimensional Elastic-Plastic Deformation Analysis of Composite Sandwich Panel under Blast Loading [Volume 52, Issue 5, 2020, Pages 1079-1100]
  • Maleki, Sattar Experimental and Numerical Investigation of Second Mode of Failure in Unlike End Notch Flexure Samples [Volume 52, Issue 8, 2020, Pages 2093-2106]
  • Malekzadeh Fard, Keramat Free Vibration Analysis of Doubly Curved Composite Sandwich Panels with Variable Thickness [Volume 52, Issue 8, 2020, Pages 2195-2212]
  • Malekzadeh Varnosfadrani, Maryam Unmanned Aerial Vehicle Formation Flying Path Plan by Combined Algorithm of Potential and Lyapunov [Volume 52, Issue 1, 2020, Pages 85-96]
  • Maljaee, Mohammad Ali Experimental Study of Effects of Bleed Geometric Parameters on the Performance of a Supersonic Axisymmetric Intake [Volume 52, Issue 7, 2020, Pages 1809-1828]
  • Mani, Mahmoud New Development in Direct Simulation Monte Carlo Algorithm for Asymmetric Complex Geometry [Volume 52, Issue 7, 2020, Pages 1757-1772]
  • Mansouri, Saeid Experimental and Numerical Investigation of Width Reduction Effect on the Output Power of Piezoelectric Energy Harvester Beam [Volume 52, Issue 5, 2020, Pages 1257-1272]
  • Maryami, Reza Experimental investigation of the turbulence effect of incoming flow on the unsteady pressure field and the flow noise around circular cylinder [Volume 52, Issue 4, 2020, Pages 923-942]
  • Masrour, Javad Gust Response Analysis of Flexible Aircraft [Volume 52, Issue 1, 2020, Pages 97-108]
  • Masrouri Saadat, Sayed Hossein 1-1- Two Phase Simulation of Droplets Motion in Cathode Channels and Manifolds of Polymer Electrolyte Membrane Fuel Cell [Volume 52, Issue 9, 2020, Pages 2479-2490]
  • Masrouri Saadat, Sayed Hossein Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Mazaheri, Kiumars Chemical and Physical Effects of Carbon Dioxide Injection with Different Preheating Temperature in Flameless Combustion [Volume 52, Issue 2, 2020, Pages 311-328]
  • Mazaheri, Kiumars Numerical Study of the Flat Flame Burner Power Effect on the Producing Uniform Temperature Distribution in Cracking Furnaces [Volume 52, Issue 6, 2020, Pages 1379-1396]
  • Mazaheri, Kiumars Maps of Flame Dynamics for Premixed Lean Hydrogen-Air Combustion in a Heated Microchannel [Volume 52, Issue 9, 2020, Pages 2443-2464]
  • Meghdari, Ali Impacts of Social Robots in Education and Rehabilitation of Children with Autism in Iran [Volume 52, Issue 8, 2020, Pages 2329-2354]
  • Mehrpour, Saeed Reza Desired Properties of Disc in Numerical Models and Its Influence on Biomechanical Behavior of Lumbar Spine [Volume 52, Issue 1, 2020, Pages 187-202]
  • Memarian, Mohammad Mahdi Modeling of hyperelastic incompressible behavior of functionally graded material under bending load [Volume 52, Issue 8, 2020, Pages 2045-2062]
  • Miladi, Haddad State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Mirakhorly, Fateme An Image-Based Computational Simulation of Pulmonary Embolism Using Radiological Images [Volume 52, Issue 7, 2020, Pages 1847-1864]
  • Mirbabaei, seyed Ahmadreza Experimental Study of the Supersonic Exhaust Diffuser Spray Cooling System [Volume 52, Issue 7, 2020, Pages 1793-1808]
  • Mirbagheri, Mehran Numerical Study of the Flat Flame Burner Power Effect on the Producing Uniform Temperature Distribution in Cracking Furnaces [Volume 52, Issue 6, 2020, Pages 1379-1396]
  • Mirbagheri, Seyed Mohammad Hossein Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Miripour Fard, Behnam Modeling and Sliding Mode Control of Rotating Helical Pump [Volume 52, Issue 8, 2020, Pages 2277-2292]
  • Mirzababaie Mostofi, Tohid Study on Performance of Sandwich Panel Structures with Honeycomb Core Subjected to Impulsive Loading [Volume 52, Issue 10, 2021, Pages 2823-2838]
  • Moavenian, Majid Fault Diagnosis Based on Model and Dynamic Behavior of Vehicle Suspension System [Volume 52, Issue 1, 2020, Pages 27-42]
  • Modarres Gheisari, Seyed Mohammad Mohsen Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability [Volume 52, Issue 4, 2020, Pages 1005-1022]
  • Moghimi, Mahdi Experimental and Numerical Study of a Vertical Axis Tidal Current Turbine [Volume 52, Issue 4, 2020, Pages 745-768]
  • Mohamadnejad, sedigheh e Limit Forming on Density Dislocation of Effect T [Volume 52, Issue 10, 2021, Pages 2709-2724]
  • Mohamamdi, Adel Single and Multi-objective Optimal Control Design by Genetic Programming and Comparison with Riccati Equation Solutions [Volume 52, Issue 12, 2021, Pages 3369-3382]
  • Mohammad Alizadeh, Taban Analysis of Reflux Condensation Phenomena During small Break Loss of Coolant Accident in Bushehr Reactor [Volume 52, Issue 4, 2020, Pages 907-922]
  • Mohammadi, Bijan Developing a CDM Based Model for Creep-Fatigue Life Assessment of a Gas Turbine Blade [Volume 52, Issue 10, 2021, Pages 2951-2966]
  • Mohammadi, Esmail Design and Analysis of Gas Ejector in High Altitude Test Facility [Volume 52, Issue 11, 2021, Pages 3015-3032]
  • Mohammadi, Forud Natural Frequency Analysis of Rotating Thin-Walled Beams with Embedded Shape Memory Alloy Wires Subjected to Uniform Temperature Field [Volume 52, Issue 1, 2020, Pages 127-140]
  • Mohammadi, Kamal A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Mohammadi, Mohammad Mostafa Design and Simulation of a Dual-State Quartz Resonator Force Sensor [Volume 52, Issue 5, 2020, Pages 1273-1284]
  • Mohammadi, Younes Buckling Analysis of Truncated Conical Sandwich Panel with Porous Functionally Graded Core in Different Thermal Conditions [Volume 52, Issue 10, 2021, Pages 2859-2878]
  • Mohammadikhah, Fazel A Novel Biomass-Driven Cogeneration System for Zero-Energy Buildings [Volume 52, Issue 6, 2020, Pages 1443-1462]
  • Mohebbi-Kalhori, Davod Study of Young’s Modulus and Failure Strength of Polyurethane-Based Binary Polymer Composite Structures Based on Stress-Strain Curve for Tissue Engineering Vascular Graft Application [Volume 52, Issue 12, 2021, Pages 3567-3582]
  • Molaeimanesh, Gholam Reza Investigation of Temperature Distribution During Dynamic Stress Test on the Surface of Lithium-ion Battery used in an Electric Hybrid Vehicle [Volume 52, Issue 6, 2020, Pages 1497-1512]
  • Mollaei-Dariani, Bijan Experimental Investigation of the Mechanical Properties of Aluminum Sheets Reinforced by Carbon Nanotubes Utilizing Accumulative Roll Bonding Process [Volume 52, Issue 3, 2020, Pages 635-646]
  • Mollamahdi, Mahdi Experimental Analysis of a Gas-Tank Water Heater with Porous Burner [Volume 52, Issue 6, 2020, Pages 1613-1626]
  • Momenifar, Mohammad A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Moradi, Shapour Effects of Position and Shape of Cutout on the Axial Buckling Load of Composite Cylindrical Panel [Volume 52, Issue 10, 2021, Pages 2879-2898]
  • Morovvati, Mohammadreza Experimental Investigation of the Mechanical Properties of Aluminum Sheets Reinforced by Carbon Nanotubes Utilizing Accumulative Roll Bonding Process [Volume 52, Issue 3, 2020, Pages 635-646]
  • Mosaddegh, Peiman Experimental and Simulation Study on the Warpage of Polyamide 6 Based on Thermo Mechanical Behavior of Material Using Uniaxial Tensile Test [Volume 52, Issue 5, 2020, Pages 1127-1138]
  • Mosaddegh, Peiman Stress and Vibrational Analysis of Non-Pneumatic Tire and Study the Effect of the Spoke Curvature and Velocity on the Wheel Vibration Using Finite Element Method [Volume 52, Issue 8, 2020, Pages 2213-2230]
  • Moslemi Naeini, Hassan Numerical and Experimental Investigation of the Effect of Parameters in Shear Spinning Process of a Conic Sample [Volume 52, Issue 3, 2020, Pages 543-554]
  • Mousavi-khoshdel, Seyed Morteza Investigation of Temperature Distribution During Dynamic Stress Test on the Surface of Lithium-ion Battery used in an Electric Hybrid Vehicle [Volume 52, Issue 6, 2020, Pages 1497-1512]
  • Movahedi, Alireza Far-field Aeroacoustic Noise Prediction of a Tall Standard Building Model by Measuring Unsteady Surface Pressures [Volume 52, Issue 7, 2020, Pages 1885-1904]
  • Mozafari shamsi, Mohsen Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Microchannel with Curved Stirrer by Lattice Boltzmann Method [Volume 52, Issue 11, 2021, Pages 3187-3202]

N

  • Nariman-zadeh, Nader Single and Multi-objective Optimal Control Design by Genetic Programming and Comparison with Riccati Equation Solutions [Volume 52, Issue 12, 2021, Pages 3369-3382]
  • Naserkhaki, Sadegh Desired Properties of Disc in Numerical Models and Its Influence on Biomechanical Behavior of Lumbar Spine [Volume 52, Issue 1, 2020, Pages 187-202]
  • Navabi, M. Rapid and optimal design of a tail-sitter VTOL ducted fan using a neural network and PSO algorithm [Volume 52, Issue 12, 2021, Pages 3353-3368]
  • Nazari, Mohsen Experimental Study of Impacting a Spherical Hydrophobic Particle on an Air-Water Interface [Volume 52, Issue 4, 2020, Pages 943-954]
  • Nazari, Mohsen Experimental Investigation and Visualization of Flow Boiling Heat Transfer in a Vertical Tube Containing Metal Porous Medium [Volume 52, Issue 6, 2020, Pages 1595-1612]
  • Nazari, Mohsen Experimental Study of Premixed Methane-Air Flame Propagation in a Closed Duct with Porous Obstacle [Volume 52, Issue 11, 2021, Pages 3225-3240]
  • Nazari, Mohsen Experimental Study of Foam Generation in a Microfluidic Device [Volume 52, Issue 7, 2020, Pages 1729-1740]
  • Nazari, Mostafa Proposing a Finite Duration Cancer Treatment Using Multi-Objective Optimization [Volume 52, Issue 5, 2020, Pages 1365-1376]
  • Nazari, Mostafa Optimization of the Turbines Locating in the Wind Farm [Volume 52, Issue 9, 2020, Pages 2387-2402]
  • Nazif, Hamid Reza Analytic Solution of Governing Equations of Heat and Moisture Transfer in a CapillaryPorous Body with Dirichlet Boundary Conditio [Volume 52, Issue 2, 2020, Pages 465-476]
  • Nehzati, Hassan State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Nekoonam, Saeid Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Nemati, Amir Bahador Investigation of Temperature Distribution During Dynamic Stress Test on the Surface of Lithium-ion Battery used in an Electric Hybrid Vehicle [Volume 52, Issue 6, 2020, Pages 1497-1512]
  • Niknejad, Abbas Nonlinear Vibration and Stability Analysis of Thermally Postbuckled Double-Layered Graphene Sheet [Volume 52, Issue 8, 2020, Pages 2177-2194]
  • Norouzi, Mahmood Modeling of the Magnetorheological Damper with Optimization Approach for Magnetic Fluid Molecular Properties [Volume 52, Issue 7, 2020, Pages 1975-1992]
  • Norouzi, Mahmood Analytical Solution of the Heat Transfer in Heterogeneous Composite Conical Shells with Temperature Dependent Conduction Coefficients [Volume 52, Issue 9, 2020, Pages 2581-2596]
  • Norouzi, Mahmood An Analytical and Experimental Study on Dynamics of Newtonian Falling Drops in Inertia Regime with Low Reynolds Numbers [Volume 52, Issue 11, 2021, Pages 3033-3044]
  • Nourazar, Salman Geometric Optimization of Highly Conductive Inserts with Variable Thickness Embedded in a Fin [Volume 52, Issue 9, 2020, Pages 2569-2580]
  • Nourazar, Seyed Salman Experimental Investigation of the Influence of Polymer Electrolyte Membrane Fuel Cells Operating Conditions on Its Performance and Water Management [Volume 52, Issue 11, 2021, Pages 3257-3274]

O

  • Ozgoli, Hassan Ali Experimental Evaluation of an Energy Efficiency Improvement System in Split Air Conditioner [Volume 52, Issue 2, 2020, Pages 365-380]

P

  • Parhizkar, Hamid 3D-Simulation and Numerical Analysis of the Local Entropy Generation and Exergy Destruction in a Stator Vane of a Typical Gas Turbine [Volume 52, Issue 11, 2021, Pages 3125-3142]
  • Parsaei, Mehran Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Parvin, Nader Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method [Volume 52, Issue 10, 2021, Pages 2759-2778]
  • Parviz, Hadi Uncertainty Propagation Analysis in Free Vibration of Uncertain Composite Plate Using Stochastic Finite Element Method [Volume 52, Issue 12, 2021, Pages 3503-3520]
  • PasdarShahri, Hadi The Importance of the Compatible Combustion and Sub-grid Scale Models on the Simulation of Large-Scale Pool Fire [Volume 52, Issue 9, 2020, Pages 2425-2442]
  • Pashaei, Mohammad Hadi Three-Dimensional Elastic-Plastic Deformation Analysis of Composite Sandwich Panel under Blast Loading [Volume 52, Issue 5, 2020, Pages 1079-1100]
  • Pazoki, Marzieh An Image-Based Computational Simulation of Pulmonary Embolism Using Radiological Images [Volume 52, Issue 7, 2020, Pages 1847-1864]
  • Peighambarsoust, Seyed Jamaledin Preparation of Polystyrene-Starch Composite by Melt Extrusion and Evaluation of its Mechanical, Thermal Biodegradation Properties [Volume 52, Issue 10, 2021, Pages 2741-2758]
  • Pirkandi, Jamasb 3D-Simulation and Numerical Analysis of the Local Entropy Generation and Exergy Destruction in a Stator Vane of a Typical Gas Turbine [Volume 52, Issue 11, 2021, Pages 3125-3142]
  • Pirmohammadi, Mohsen Numerical Investigation of Fin Position Effect on the Forced Convection Heat Transfer Inside a Channel in Turbulent Flow [Volume 52, Issue 6, 2020, Pages 1627-1640]
  • Poorveis, Davood Effects of Position and Shape of Cutout on the Axial Buckling Load of Composite Cylindrical Panel [Volume 52, Issue 10, 2021, Pages 2879-2898]
  • Pormahmod Hesar, Nader Optimal Layout of a Typical Telecommunication Center with the Help of Computational Fluid Dynamics and Artificial Neural Networks [Volume 52, Issue 11, 2021, Pages 2969-2984]
  • Pouranvari, Majid Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718 [Volume 52, Issue 10, 2021, Pages 2629-2646]
  • Pouretemad, Hamidreza Impacts of Social Robots in Education and Rehabilitation of Children with Autism in Iran [Volume 52, Issue 8, 2020, Pages 2329-2354]
  • Pourfallah, Mohsen Simulation of the Heating, Ventilation, and Air Conditioning System with Geothermal Energy and Solar Collector [Volume 52, Issue 2, 2020, Pages 347-364]
  • Pourkamali Anaraki, Ali Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Puladrang, Youness Experimental Investigation of Longitudinal Tabs Effects on Film-Cooling Effectiveness of Pea Shaped Holes in Gas Turbine Blades [Volume 52, Issue 4, 2020, Pages 813-832]

R

  • Rabbani, Yahya Experimental Study on Stability of Magnetorheological Fluid by Using of Fe3O4/ Cellulose Nanoparticles [Volume 52, Issue 10, 2021, Pages 2779-2790]
  • Raeisifard, Hamed Buckling Analysis of Truncated Conical Sandwich Panel with Porous Functionally Graded Core in Different Thermal Conditions [Volume 52, Issue 10, 2021, Pages 2859-2878]
  • Rafatnia, Sadra Design and Implementation a Constrained Adaptive Estimation Algorithm for Lowcost Integrated Navigation System in Urban Area [Volume 52, Issue 5, 2020, Pages 1333-1348]
  • Rahgoshay, Seyyed Majid Study of Temperature Distribution of H2/O2 Polymer Electrolyte Fuel Cell in Different Operating Conditions [Volume 52, Issue 6, 2020, Pages 1479-1496]
  • Rahi, Abbas Optimal Vibration Reduction of the Flexible Shaft-Disk-Blades System Using a Set of Nonlinear Energy Sink [Volume 52, Issue 12, 2021, Pages 3425-3444]
  • Rahimi, Gholam Hosein Prediction of the Critical Buckling Load of Grid-Stiffened Composite Plates Using Vibration Correlation Technique [Volume 52, Issue 1, 2020, Pages 221-232]
  • Rahimi, Gholam Hosein Modeling of hyperelastic incompressible behavior of functionally graded material under bending load [Volume 52, Issue 8, 2020, Pages 2045-2062]
  • Rahimi, Gholam Hosein Modeling the Onset and Growth of Damage in Composite Cylinders under Lateral Pressure Loading Between Parallel Plates [Volume 52, Issue 5, 2020, Pages 1101-1126]
  • Rahimi Esboee, Mazaher 1-1- Two Phase Simulation of Droplets Motion in Cathode Channels and Manifolds of Polymer Electrolyte Membrane Fuel Cell [Volume 52, Issue 9, 2020, Pages 2479-2490]
  • Rahimi Esboee, Mazaher Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Rahimzadeh, Mohammad Nonlocal Analysis of Chaotic Vibration, Primary and Super-Harmonic Resonance of Single Walled Carbon Nanotube Considering Thermal Effects [Volume 52, Issue 1, 2020, Pages 233-248]
  • Rahmani, Khosrow Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method [Volume 52, Issue 10, 2021, Pages 2759-2778]
  • Rahmani, Mohsen Buckling Analysis of Truncated Conical Sandwich Panel with Porous Functionally Graded Core in Different Thermal Conditions [Volume 52, Issue 10, 2021, Pages 2859-2878]
  • Rahmani, Omid Free and Forced Vibration Analysis of Kelvin-Voigt Viscoelastic Nanoplate by Using Modified Couple Stress Theory [Volume 52, Issue 1, 2020, Pages 173-186]
  • Rahmati, Ahmad Reza Three-Dimensional Simulation of Helium Gas Flow in an Aluminum Heat Sink with Rectangular Microchannel in Slip Flow Regime [Volume 52, Issue 2, 2020, Pages 477-492]
  • Rajabi Zargarabadi, Mehran Numerical Investigation of the Effect of Coolant Injection Angle on the Pulsed Film Cooling Effectiveness of Square Wave Flow on Flat Plate [Volume 52, Issue 6, 2020, Pages 1641-1658]
  • Ramezani, Amir Experimental Investigation and Visualization of Flow Boiling Heat Transfer in a Vertical Tube Containing Metal Porous Medium [Volume 52, Issue 6, 2020, Pages 1595-1612]
  • Ramezanizadeh, Mahdi Experimental Investigation of Longitudinal Tabs Effects on Film-Cooling Effectiveness of Pea Shaped Holes in Gas Turbine Blades [Volume 52, Issue 4, 2020, Pages 813-832]
  • Ramezannejad Azarboni, Habib Nonlocal Analysis of Chaotic Vibration, Primary and Super-Harmonic Resonance of Single Walled Carbon Nanotube Considering Thermal Effects [Volume 52, Issue 1, 2020, Pages 233-248]
  • Ramiar, Abbas Study of Temperature Distribution of H2/O2 Polymer Electrolyte Fuel Cell in Different Operating Conditions [Volume 52, Issue 6, 2020, Pages 1479-1496]
  • Ranjbar, Ali Akbar Study of Temperature Distribution of H2/O2 Polymer Electrolyte Fuel Cell in Different Operating Conditions [Volume 52, Issue 6, 2020, Pages 1479-1496]
  • Rasekh, sepehr The Study of the Effect of Floating Platform Rotational Disturbance on theAerodynamic Performance of Offshore Wind Turbine in the Presence of Pitch Control System [Volume 52, Issue 4, 2020, Pages 769-784]
  • Rastegari, Rambod Design and Kinematics Analysis of a Novel Cable Driven Parallel Active Joint [Volume 52, Issue 12, 2021, Pages 3397-3410]
  • Razfar, Mohammad Reza Optimization of Parameters Affecting Magnetic Abrasive Finishing Process Using Response Surface Method [Volume 52, Issue 10, 2021, Pages 2691-2708]
  • Rezaee, Mousa The Effect of Anisotropic Bearings on Dynamics and Stability of the Ball-Spring Auto-balancer [Volume 52, Issue 5, 2020, Pages 1319-1332]
  • Rezaei, Hamed Comparing Cooling and Lubricating Effects of Different Cutting Fluid Applications in Micromilling Process [Volume 52, Issue 3, 2020, Pages 605-618]
  • Rezaei, Yosef Experimental Comparison of Injection Characteristics of Elliptical and Circular Liquid Jets into an Air Crossflow [Volume 52, Issue 7, 2020, Pages 1773-1792]
  • Rezaei Sangtabi, Ahmad Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Rezasefat, Mohammad Numerical Analysis of Rolling Contact Fatigue in Common Turnouts of Iran Railway Track [Volume 52, Issue 8, 2020, Pages 2029-2044]
  • Rohani, Abbas Estimation of Stress Concentration Factor of Elliptical Cutout in the Composite Sheets under Tensile Load [Volume 52, Issue 8, 2020, Pages 2081-2092]

S

  • Sadatpour, Seyed Hamidreza Optimization of S-Shaped Inlet Diffuser for Improvement of Total Pressure Loss and Flow Uniformity [Volume 52, Issue 11, 2021, Pages 3171-3186]
  • Sadatsakak, Seyed Abbas Optimization and Thermodynamic Analysis of the Dual Mixed Refrigerant Process of the Natural Gas Liquefaction [Volume 52, Issue 9, 2020, Pages 2357-2368]
  • Sadeghi, Alireza Optimization and Thermodynamic Analysis of the Dual Mixed Refrigerant Process of the Natural Gas Liquefaction [Volume 52, Issue 9, 2020, Pages 2357-2368]
  • Sadeghi, Arman Influences of Viscoelasticity and Streaming Potential on Surface Reaction Kinetics in Micro reactors [Volume 52, Issue 4, 2020, Pages 893-906]
  • Sadeghi, Mohammad Hosein Comparing Cooling and Lubricating Effects of Different Cutting Fluid Applications in Micromilling Process [Volume 52, Issue 3, 2020, Pages 605-618]
  • Sadighi, Mojtaba Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Sadripour, Soroush Analysis of Different Heat Transfer Mechanisms Portions during Traditional Flatbreads Baking to Improve Quality of Breads and Reducing Fuel Consumption [Volume 52, Issue 11, 2021, Pages 3307-3324]
  • Safarpour, Pedram Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability [Volume 52, Issue 4, 2020, Pages 1005-1022]
  • Saffari, Hamid An Empirical Study on Dropwise Condensation Occurred on Surfaces Hydrophobized Using a Single-Step Electrodeposition [Volume 52, Issue 6, 2020, Pages 1397-1412]
  • Sajjadinia, Amir Hesam Modeling and Sliding Mode Control of Rotating Helical Pump [Volume 52, Issue 8, 2020, Pages 2277-2292]
  • Salamati-Khiavi, Sohrab Experimental Determination of the Modified Drucker-Prager Cap Constitutive Model for 92 Percent Alumina Powder [Volume 52, Issue 10, 2021, Pages 2725-2740]
  • Salavati, Hadi Multi-Objective Optimization of Laser Peening Process Parameters Using Taguchi Orthogonal Array and Gray Relational Analysis [Volume 52, Issue 10, 2021, Pages 2917-2930]
  • Salehizadeh, Amir Masoud Development of A Fully Lagrangian Smoothed Particle Hydrodynamics -Based Coupled Method for Simulation of Fluid– Structure Interaction [Volume 52, Issue 11, 2021, Pages 3155-3170]
  • Saleh Mirhasani, Soheila Exergoeconomic Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with External Reformer and Dimethyl Ether [Volume 52, Issue 6, 2020, Pages 1463-1478]
  • Salimi, Aref Hydrodynamic Behavior of Different No-Slip Condition on the Curved Boundaries in the Lattice Boltzmann Method [Volume 52, Issue 7, 2020, Pages 1925-1942]
  • Salimpour, Mohammad Reza The Experimental Analyses of Grooved Surface and Magnetic Field Effects on γ-Fe2O3/water Nanofluid Pool Boiling [Volume 52, Issue 6, 2020, Pages 1577-1594]
  • Salmanzadeh, Mazyar Evaluation of the Impact of Fan Coil Airflow Velocity on the Micron Particles Distribution in the Human Breathing Zone [Volume 52, Issue 6, 2020, Pages 1675-1686]
  • Sarhaddi, Faramarz Performance Analyzing of an Inverted Absorber Basin Solar Still Equipped with Photovoltaic Cells [Volume 52, Issue 2, 2020, Pages 297-310]
  • Sarhaddi, Faramarz Thermoeconomic Analysis of a Double Slope Basin Solar Still Equipped to Phase Change Material and Photovoltaic Thermal Collector [Volume 52, Issue 6, 2020, Pages 1531-1550]
  • Sarhaddi, Faramarz Performance Analysis of a Building Heating System using Underground Source Heat Pump and Photovoltaic Thermal Collector [Volume 52, Issue 9, 2020, Pages 2403-2424]
  • Sayah Badkhor, Mostafa Study on Performance of Sandwich Panel Structures with Honeycomb Core Subjected to Impulsive Loading [Volume 52, Issue 10, 2021, Pages 2823-2838]
  • Sefid, Mohammad Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Sefid, Mohammad Numerical Study of Mixing in Double and Multiple T-Shaped Micromixers with Aligned and Non-Aligned Inputs [Volume 52, Issue 7, 2020, Pages 1715-1728]
  • Sefid, Mohammad Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Microchannel with Curved Stirrer by Lattice Boltzmann Method [Volume 52, Issue 11, 2021, Pages 3187-3202]
  • Seiedi Niaki, Keyvan Experimental Evaluation of an Energy Efficiency Improvement System in Split Air Conditioner [Volume 52, Issue 2, 2020, Pages 365-380]
  • Sepahi-Younsi, Javad Computational Investigation of the Effects of Heat Source Position on the Performance of a Mixed Compression Supersonic Intake [Volume 52, Issue 4, 2020, Pages 1023-1036]
  • Sepahi-Younsi, Javad Experimental Study of Effects of Bleed Geometric Parameters on the Performance of a Supersonic Axisymmetric Intake [Volume 52, Issue 7, 2020, Pages 1809-1828]
  • Sepehrirahnama, Shahrokh A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems [Volume 52, Issue 7, 2020, Pages 1905-1924]
  • Sepehrnia, Mojtaba Three-Dimensional Simulation of Helium Gas Flow in an Aluminum Heat Sink with Rectangular Microchannel in Slip Flow Regime [Volume 52, Issue 2, 2020, Pages 477-492]
  • Sepehry, Naserodin Free and Forced Vibration Analysis of Piezoelectric Patches Based on Semi-Analytic Method of Scaled Boundary Finite Element Method [Volume 52, Issue 12, 2021, Pages 3463-3484]
  • Seyedkashi, S.M. Hossein Experimental and Numerical Investigation on the Reinforcement Cover to Concrete Surface Using Eddy Current [Volume 52, Issue 10, 2021, Pages 2791-2808]
  • Seyed Mousavi, Seyed Mojtaba Kinetostatic Performance Comparison of Spherical Parallel Mechanisms Extracted from Type Synthesis with Modeling Clearance in Passive Joints [Volume 52, Issue 5, 2020, Pages 1301-1318]
  • Seyfi, Alireza Experimental and Numerical Investigation of Second Mode of Failure in Unlike End Notch Flexure Samples [Volume 52, Issue 8, 2020, Pages 2093-2106]
  • Seyyedi, Seyyed Masoud Investigating the Orientation of the Heater and Cooler on the Performance of a Mini Natural Circulation Loop with Cu-Water Nanofluid [Volume 52, Issue 11, 2021, Pages 3203-3224]
  • Shabgard, mohammad reza A Comparative Study on the Effect of Ultrasonic Vibration on Aluminum Surface Properties in Electrical Discharge Alloying [Volume 52, Issue 3, 2020, Pages 657-668]
  • Shafiee, Mojtaba Using Polyethylene Glycol, as a Phase Change Material and Fins for the Cooling of Photovoltaic Cells of the Crystalline Type [Volume 52, Issue 6, 2020, Pages 1551-1560]
  • Shafiee, Mojtaba The Drag Coefficient Prediction of a Rising Bubble through a Non-Newtonian Fluid [Volume 52, Issue 4, 2020, Pages 863-880]
  • Shafiei, Ali Reza Development of A Fully Lagrangian Smoothed Particle Hydrodynamics -Based Coupled Method for Simulation of Fluid– Structure Interaction [Volume 52, Issue 11, 2021, Pages 3155-3170]
  • Shafiei Alavijeh, Mohammad Investigation and Optimization Flat Lapping Process Using Non-Dominated Sorting Genetic Algorithm II [Volume 52, Issue 3, 2020, Pages 669-686]
  • Shafigh, Mahdi Proposing a Finite Duration Cancer Treatment Using Multi-Objective Optimization [Volume 52, Issue 5, 2020, Pages 1365-1376]
  • Shahgholian-Ghahfarokhi, Davoud Prediction of the Critical Buckling Load of Grid-Stiffened Composite Plates Using Vibration Correlation Technique [Volume 52, Issue 1, 2020, Pages 221-232]
  • Shahmardan, MM Experimental Investigation and Visualization of Flow Boiling Heat Transfer in a Vertical Tube Containing Metal Porous Medium [Volume 52, Issue 6, 2020, Pages 1595-1612]
  • Shahmardan, Mohammad Mohsen Experimental Study of Impacting a Spherical Hydrophobic Particle on an Air-Water Interface [Volume 52, Issue 4, 2020, Pages 943-954]
  • Shahmardan, Mohammad Mohsen Modeling of the Magnetorheological Damper with Optimization Approach for Magnetic Fluid Molecular Properties [Volume 52, Issue 7, 2020, Pages 1975-1992]
  • Shahmardan, Mohammad Mohsen Analytical Solution of the Heat Transfer in Heterogeneous Composite Conical Shells with Temperature Dependent Conduction Coefficients [Volume 52, Issue 9, 2020, Pages 2581-2596]
  • Shahmolla Ghamsari, Ahmad Reza Analysis of the Wear of Railway Turnouts in a Combined Method and Hardening Model [Volume 52, Issue 5, 2020, Pages 1213-1228]
  • Shahrabi Farahani, Alireza Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing [Volume 52, Issue 4, 2020, Pages 797-812]
  • Shahravi, Majid Analysis of the Wear of Railway Turnouts in a Combined Method and Hardening Model [Volume 52, Issue 5, 2020, Pages 1213-1228]
  • Shahravi, Majid Numerical Analysis of Rolling Contact Fatigue in Common Turnouts of Iran Railway Track [Volume 52, Issue 8, 2020, Pages 2029-2044]
  • Shahriary, Pouya On the Fretting Fatigue Behavior of the Cold Expanded Aluminum Alloy 2024-T3 Plates [Volume 52, Issue 5, 2020, Pages 1193-1212]
  • Shahsavani, Amir Reza Experimental and Numerical Investigation of Initial Notch Radius Effect on Charpy Fracture Energy in API X65 Steel [Volume 52, Issue 5, 2020, Pages 1139-1152]
  • Shamshirsaz, Mahnaz Free and Forced Vibration Analysis of Piezoelectric Patches Based on Semi-Analytic Method of Scaled Boundary Finite Element Method [Volume 52, Issue 12, 2021, Pages 3463-3484]
  • Sharafi, Ahmad Effect of Steady Spanwise Blowing on the Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 52, Issue 11, 2021, Pages 3001-3014]
  • Sharafkhani, Naser Dynamic Behavior of a Micro-Beam Subjected to Voltage and Fluid Flow as a Micro Vortex Generator [Volume 52, Issue 8, 2020, Pages 2231-2242]
  • Shaterzadeh, Alireza Optimization of Influence Parameters on Thermal Buckling of Hybrid Composite Plates with Cutout Using Genetic Algorithm [Volume 52, Issue 8, 2020, Pages 2107-2122]
  • Sheikholeslam, Farid Design of Three-dimensional Robust Guidance Law Using Adaptive Dynamic Programming with Input Saturation Constraint [Volume 52, Issue 12, 2021, Pages 3411-3424]
  • Sheikhzadeh, Ghanbar Ali Experimental Study of Fluid Flow and Heat Transfer of Al2 O3 -Water Nanofluid in Helically Coiled Micro-Finned Tubes [Volume 52, Issue 2, 2020, Pages 509-524]
  • Sheikhzadeh, Ghanbar Ali Numerical Study of the Effect of the Hall phenomenon on Supersonic flow in Magneto Hydro Dynamic Generator [Volume 52, Issue 4, 2020, Pages 1037-1054]
  • Shenavar, Abolfazl Preparation of Polystyrene-Starch Composite by Melt Extrusion and Evaluation of its Mechanical, Thermal Biodegradation Properties [Volume 52, Issue 10, 2021, Pages 2741-2758]
  • Shervani Tabar, Mohammad Taghi Dynamic Behavior of a Micro-Beam Subjected to Voltage and Fluid Flow as a Micro Vortex Generator [Volume 52, Issue 8, 2020, Pages 2231-2242]
  • Shiravi, Amir hossein Using Polyethylene Glycol, as a Phase Change Material and Fins for the Cooling of Photovoltaic Cells of the Crystalline Type [Volume 52, Issue 6, 2020, Pages 1551-1560]
  • Shojaeifard, Mohammad Mechanical Behavior of Temperature-Sensitive Hydrogel Considering Functionally Graded Characteristics [Volume 52, Issue 12, 2021, Pages 3583-3594]
  • Shokri, Aziz Improving the Milling Machine Stiffness by Optimizing the Internal Stiffeners Layout and the Wall Thickness Distribution of Column [Volume 52, Issue 3, 2020, Pages 687-702]
  • Sobhnamayan, Fatemeh Performance Analyzing of an Inverted Absorber Basin Solar Still Equipped with Photovoltaic Cells [Volume 52, Issue 2, 2020, Pages 297-310]
  • Sobhnamayan, Fatemeh Thermoeconomic Analysis of a Double Slope Basin Solar Still Equipped to Phase Change Material and Photovoltaic Thermal Collector [Volume 52, Issue 6, 2020, Pages 1531-1550]
  • Sobhnamayan, Fatemeh Performance Analysis of a Building Heating System using Underground Source Heat Pump and Photovoltaic Thermal Collector [Volume 52, Issue 9, 2020, Pages 2403-2424]
  • Soltani, M.R. Impact of Reduced Frequency on Pressure Distribution on the Lower Surface of a Supercritical Airfoil in Pitch-Pause-Return-Motion [Volume 52, Issue 4, 2020, Pages 971-984]
  • Soltani, Nasser Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature [Volume 52, Issue 1, 2020, Pages 265-278]
  • Soroushan, Mohsen 3D-Simulation and Numerical Analysis of the Local Entropy Generation and Exergy Destruction in a Stator Vane of a Typical Gas Turbine [Volume 52, Issue 11, 2021, Pages 3125-3142]

T

  • Tabatabaeipour, Morteza Ultrasonic Guided Wave-Based Inspection of Straight Seam Welded Pipes [Volume 52, Issue 10, 2021, Pages 2647-2660]
  • Tadi Bani, Yaghoob Control of a Piezoelectric Nano-Actuator based on Flexoelectric Size-Dependent Theory [Volume 52, Issue 1, 2020, Pages 109-126]
  • Tadi Bani, Yaghoob Investigation of Power-Law Fluid Flow through a Two-Dimensional Microchannel Based on a Couple Stress Theory-Calculation of Characteristic Length [Volume 52, Issue 7, 2020, Pages 1707-1714]
  • Tadjfar, Mehran Experimental Comparison of Injection Characteristics of Elliptical and Circular Liquid Jets into an Air Crossflow [Volume 52, Issue 7, 2020, Pages 1773-1792]
  • Tadjfar, Mehran Study on the Base Flow of Two-Dimensional Liquid Jets Injected Into Quiescent Air [Volume 52, Issue 11, 2021, Pages 3045-3056]
  • Taghilou, Taghilou Hydrodynamic Behavior of Different No-Slip Condition on the Curved Boundaries in the Lattice Boltzmann Method [Volume 52, Issue 7, 2020, Pages 1925-1942]
  • Taghilou, Taghilou Stability and Thermodynamic Consistency in the Coexistence Curve Of Liquid-Vapor in A Modified Pseudo-Potential Model [Volume 52, Issue 11, 2021, Pages 3091-3106]
  • Taghizadeh, Mostafa Optimal Control Based on Minimum-Energy Trajectory Planning of a Quadrotor [Volume 52, Issue 5, 2020, Pages 1349-1364]
  • Taghizadeh, Mostafa Optimal Adaptive Super-Twisting Sliding Mode Control of an Lower Limb Exoskeleton [Volume 52, Issue 12, 2021, Pages 3533-3548]
  • Taghizadeh, Yasin Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless Steel Materials [Volume 52, Issue 4, 2020, Pages 1055-1076]
  • Taghvaeipour, Afshin Application of a Superelement in Static and Vibration Analysis of Piezoelectric Hollow Cylinders [Volume 52, Issue 5, 2020, Pages 1245-1256]
  • Taheri, Alireza Impacts of Social Robots in Education and Rehabilitation of Children with Autism in Iran [Volume 52, Issue 8, 2020, Pages 2329-2354]
  • Taheri, Morteza Evaluation of the Impact of Fan Coil Airflow Velocity on the Micron Particles Distribution in the Human Breathing Zone [Volume 52, Issue 6, 2020, Pages 1675-1686]
  • Taheri Ahangar, Ali Experimental Study and Finite Element Simulation for Determining the Forming Window of 6063-O Aluminum Tube in Warm Hydroforming Process [Volume 52, Issue 3, 2020, Pages 571-586]
  • Taherzadeh-Fard, Alireza Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Tajbakhsh, Navid Chakherlou On the Fretting Fatigue Behavior of the Cold Expanded Aluminum Alloy 2024-T3 Plates [Volume 52, Issue 5, 2020, Pages 1193-1212]
  • Talebi, Shahram The Experimental Analyses of Grooved Surface and Magnetic Field Effects on γ-Fe2O3/water Nanofluid Pool Boiling [Volume 52, Issue 6, 2020, Pages 1577-1594]
  • Talebi, Shahram Experimental and Numerical Simulation of Fluid Flow and Inclusion Removal in the Steel Continuous Casting Tundish [Volume 52, Issue 7, 2020, Pages 1943-1954]
  • Talebsafa, Valeh Predicting Sheets Forming Limit Diagrams by Numerical Simulation of Nakazima and Modified Marciniak Tests [Volume 52, Issue 3, 2020, Pages 527-542]
  • Tale Masouleh, Mahdi Solving the Forward Kinematic Problem of Under-Constrained Cable Driven Robots for Online Control Purposes [Volume 52, Issue 1, 2020, Pages 43-56]
  • Tale Masouleh, Mahdi Kinetostatic Performance Comparison of Spherical Parallel Mechanisms Extracted from Type Synthesis with Modeling Clearance in Passive Joints [Volume 52, Issue 5, 2020, Pages 1301-1318]
  • Talesh Bahramia, Hamid Reza An Empirical Study on Dropwise Condensation Occurred on Surfaces Hydrophobized Using a Single-Step Electrodeposition [Volume 52, Issue 6, 2020, Pages 1397-1412]
  • Tamadon, A. Vibrations Analysis of a Rotor Supported by Tilting-Pad Journal Bearings with Considering of Geometric Nonlinearity [Volume 52, Issue 1, 2020, Pages 141-154]
  • Tamim, Hossein Numerical Simulation of Low-Density Lipoprotein Concentration Boundary Layer in a Straight Artery and the Effects of Wall Shear Stress [Volume 52, Issue 11, 2021, Pages 3143-3154]
  • Taraz Jamshidi, Youssef Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Tavakol, Mohammad Mehdi Numerical Investigation of Flow Field around a Mannequin Model with Airway System in an Air Conditioned Room [Volume 52, Issue 4, 2020, Pages 955-970]
  • Tavakoli, Omid Experimental Study on Stability of Magnetorheological Fluid by Using of Fe3O4/ Cellulose Nanoparticles [Volume 52, Issue 10, 2021, Pages 2779-2790]
  • Tayyareh, Ahmadreza Experimental Analysis of a Gas-Tank Water Heater with Porous Burner [Volume 52, Issue 6, 2020, Pages 1613-1626]
  • Teymouri, Saba Numerical Simulation of Three-Dimensional and Bi-Disperse Particle-Laden Turbidity Current in an Experimental Channel in the Presence of an Obstacle [Volume 52, Issue 7, 2020, Pages 1955-1974]
  • Tikani, Reza Stress and Vibrational Analysis of Non-Pneumatic Tire and Study the Effect of the Spoke Curvature and Velocity on the Wheel Vibration Using Finite Element Method [Volume 52, Issue 8, 2020, Pages 2213-2230]
  • Tourajizadeh, Hami Design, Modeling and Control of a Hybrid Climbing Robot in Manipulation Mode Using Feedback Linearization Control Method [Volume 52, Issue 1, 2020, Pages 57-84]

V

  • Vaghefpour, Hossein Control of a Piezoelectric Nano-Actuator based on Flexoelectric Size-Dependent Theory [Volume 52, Issue 1, 2020, Pages 109-126]
  • Vahdati, Mehrdad Investigation of Ultra-Precision Machining on Single Crystal Silicon Using Molecular Dynamics Simulation and Experiments [Volume 52, Issue 3, 2020, Pages 731-742]
  • Vahidi, Bahman Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless Steel Materials [Volume 52, Issue 4, 2020, Pages 1055-1076]
  • Vahidi, Bahman An Image-Based Computational Simulation of Pulmonary Embolism Using Radiological Images [Volume 52, Issue 7, 2020, Pages 1847-1864]
  • Valizadeh, Mohammad Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing [Volume 52, Issue 4, 2020, Pages 797-812]
  • Varedi Kulaee, Seyed Mojtaba Optimization of the Turbines Locating in the Wind Farm [Volume 52, Issue 9, 2020, Pages 2387-2402]
  • Varzandian, GholamAli Nonlinear Vibration and Stability Analysis of Thermally Postbuckled Double-Layered Graphene Sheet [Volume 52, Issue 8, 2020, Pages 2177-2194]
  • Vozouhi, hashem Optimal Layout of a Typical Telecommunication Center with the Help of Computational Fluid Dynamics and Artificial Neural Networks [Volume 52, Issue 11, 2021, Pages 2969-2984]

Y

  • Yadavar nikravesh, Seyed majid Looseness Detection and Assessment of Flange Type Joints Using Vibro-Acoustic Modulation Method [Volume 52, Issue 10, 2021, Pages 2661-2678]
  • Yan, Jiwang Investigation of Ultra-Precision Machining on Single Crystal Silicon Using Molecular Dynamics Simulation and Experiments [Volume 52, Issue 3, 2020, Pages 731-742]
  • Yekani Motlagh, Saber Numerical Simulation of Flow, Natural Convection and Distribution of Nano Particles inside Trapezoidal Cavity using Buongiorno’s Model [Volume 52, Issue 9, 2020, Pages 2537-2550]
  • Yousefzadeh, Shahrouz An Experimental Investigation on Tensile and Impact Properties of Bagasse/Polypropylene Natural Composite [Volume 52, Issue 8, 2020, Pages 2149-2160]

Z

  • Zamanian, Mahdi Vibrations Analysis of a Rotor Supported by Tilting-Pad Journal Bearings with Considering of Geometric Nonlinearity [Volume 52, Issue 1, 2020, Pages 141-154]
  • Zandi, Majid Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability [Volume 52, Issue 4, 2020, Pages 1005-1022]
  • Zanganeh, HR Experimental Study of Foam Generation in a Microfluidic Device [Volume 52, Issue 7, 2020, Pages 1729-1740]
  • Zaree, Taleb An Artificial Neural Network Approach for Modeling and Prediction of Energy Consumption in a Seawater Greenhouse [Volume 52, Issue 2, 2020, Pages 437-452]
  • Zareei, Sayed Mostafa A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems [Volume 52, Issue 7, 2020, Pages 1905-1924]
  • Zare Ghadi, Arian Simulation of the Heating, Ventilation, and Air Conditioning System with Geothermal Energy and Solar Collector [Volume 52, Issue 2, 2020, Pages 347-364]
  • Zarei, Sajad Stability and Thermodynamic Consistency in the Coexistence Curve Of Liquid-Vapor in A Modified Pseudo-Potential Model [Volume 52, Issue 11, 2021, Pages 3091-3106]
  • Zarepour, Gholamreza Transient Response of Annular Sandwich Plate with Functional Graded Core Combined with Piezoelectric Layers [Volume 52, Issue 12, 2021, Pages 3485-3502]
  • Zarezadeh mehrizi, mohammad amin Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Ziaee, Sima Nonlinear Vibration and Stability Analysis of Thermally Postbuckled Double-Layered Graphene Sheet [Volume 52, Issue 8, 2020, Pages 2177-2194]
  • Ziaei-Rad, Saeed A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems [Volume 52, Issue 7, 2020, Pages 1905-1924]
  • Zia Shamami, Mojtaba Experimental and Numerical Investigation into the Effect of Core Density on the Energy Absorption of Sandwich Panels with Aluminum Face Sheets and Polyurethane Foam Core [Volume 52, Issue 10, 2021, Pages 2839-2858]
  • Zirak, Saadat Numerical Investigation of the Effect of Coolant Injection Angle on the Pulsed Film Cooling Effectiveness of Square Wave Flow on Flat Plate [Volume 52, Issue 6, 2020, Pages 1641-1658]
  • Zolfaghari, Alireza Evaluation of the Impact of Fan Coil Airflow Velocity on the Micron Particles Distribution in the Human Breathing Zone [Volume 52, Issue 6, 2020, Pages 1675-1686]
  • Zolfaghari, Alireza A New Index for Evaluating Thermal Sensation Based on the Principles of Non- Fourier Heat Transfer [Volume 52, Issue 9, 2020, Pages 2597-2608]