Keyword Index

A

  • Absorption heat transformer Thermodynamic and Thermo-Economic Analysis of the Absorption Heat Transformer, Organic Rankine Cycle, and Reverse Osmosis Desalination Combined System [Volume 53, Issue 1 (Special Issue), 2021, Pages 639-654]
  • Absorption refrigeration Thermodynamic Analysis of a Novel Power, Cooling, Hydrogen and Oxygen Multi-Generation Combined Cycle Based on the Sabalan Geothermal Wells [Volume 53, Issue 1, 2021, Pages 135-154]
  • Accumulator Assessing short-term storage effects on hydrostatic wind turbine in presence of turbulent wind [Volume 53, Issue 6, 2021, Pages 3431-3444]
  • Acrylonitrile butadiene styrene Effect of 3D-Printing and Compression Molding on Anisotropy of Acrylonitrile Butadiene Styrene Micro Specimen: A Comparative Study Based on Digital Image Correlation [Volume 53, Issue 12, 2021, Pages 5645-5658]
  • Active flow control Implementation of Continuous Blowing and Synthetic Jet Actuators to Control the Flow Separation over a Fully Stalled Airfoil [Volume 53, Issue 9, 2021, Pages 4847-4864]
  • ADAMS and MATLAB Combination of active braking and semi-active suspension systems to improve the roll and yaw vehicle stability [Volume 53, Issue 6, 2021, Pages 3549-3570]
  • Adaptive fuzzy Attitude Stabilization of Quadrotor Using Adaptive Fuzzy Proportional Integral Derivative Controller [Volume 53, Issue 2 (Special Issue), 2021, Pages 1081-1094]
  • Adaptive robust Controller Active fault tolerant control based on adaptive back-stepping nonsingular fast integral terminal sliding mode approach [Volume 53, Issue 6 (Special Issue), 2021, Pages 3763-3782]
  • Additive Manufacturing Optimization of Additive Manufactured Part Made by Ti6Al4V Alloy to Achieve Best Relative Density and Surface Roughness [Volume 53, Issue 10, 2021, Pages 5169-5184]
  • Adhesive joint Condition monitoring of defective single lap adhesive joint using carbon nanotubes [Volume 53, Issue 2 (Special Issue), 2021, Pages 1321-1330]
  • Aerator Investigation on flow air concentration effect on distance of the chute spillway aerators [Volume 53, Issue 5 (Special Issue), 2021, Pages 3135-3150]
  • Aeroacoustics Effect of blowing on flow-induced noise reduction in a rod-airfoil [Volume 53, Issue 3 (Special Issue), 2021, Pages 1783-1798]
  • Aerodynamic instability Effects of air injection at rotor blade row tip region of an axial compressor on its performance under inlet distortion conditions [Volume 53, Issue 3 (Special Issue), 2021, Pages 1729-1744]
  • Aerodynamic performance Experimental and Numerical Investigation of Film Cooling Effectiveness on Squealer Tip of a Turbine Blade [Volume 53, Issue 3, 2021, Pages 1521-1536]
  • Aft Angle of Cavity Investigation of Geometric Characteristics on the Non-Reaction Supersonic Flow inside the Channel with the Presence of Cavities [Volume 53, Issue 11, 2021, Pages 5409-5428]
  • Agro-photovoltaic Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Air curtain Effect of Air Curtain on Occupants Thermal Comfort and Indoor Air Quality in an Athletic Swimming Pool with Spectators’ Stand [Volume 53, Issue 1, 2021, Pages 191-208]
  • Air-fuel mixing Numerical Investigation of the Influence of Burner’s Bluff Body on Air-Fuel Mixing and Reaction [Volume 53, Issue 9, 2021, Pages 4981-4998]
  • Air Intake cooling The Feasibility Study of a Night Sky Radiative Cooling System for Cooling the Intake Air of a Gas Turbine [Volume 53, Issue 1, 2021, Pages 155-172]
  • Air mass Numerical simulation of salt gradient solar pond by employing the solar radiation estimating function considering wall-shading effects [Volume 53, Issue 5 (Special Issue), 2021, Pages 3385-3400]
  • Air pollution Modeling of turbulent atmospheric boundary layer and dispersion of solid pollutant particles in an urban area using large eddy simulation [Volume 53, Issue 5, 2021, Pages 2839-2856]
  • Air source heat pump Comparison of long-term performance and the initial cost of the horizontal ground source heat pump with the air source heat pump in hot regions [Volume 53, Issue 5 (Special Issue), 2021, Pages 3317-3334]
  • Air unit cost Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Alcohol Numerical investigation of ethanol and acetone spray injection into gaseous environment [Volume 53, Issue 5 (Special Issue), 2021, Pages 3213-3226]
  • Allen-Cahn equation Studying of droplet impingement on hydrophilic and hydrophobic curved surfaces by lattice Boltzmann method based on Allen-Cahn equation [Volume 53, Issue 5, 2021, Pages 2869-2886]
  • Al/St joint Electroplastic friction stir spot welding for joining AA6061-T6 aluminum to galvanized DP590 steel [Volume 53, Issue 6, 2021, Pages 3733-3750]
  • Alternating direction implicit method Developing an alternating direction explicit-implicit domain-decomposition approach to solve heat transfer equation on graphics processing unit [Volume 53, Issue 3 (Special Issue), 2021, Pages 1915-1936]
  • Aluminum Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • ALUMINUM ALLOY Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy [Volume 53, Issue 6, 2021, Pages 3751-3760]
  • Aluminum-matrix composites؛ Peridynamics؛ Progressive damage growth Micro-Mechanical Damage Analysis of Al-TiC Particulate Reinforced Composites by Peridynamic Theory [Volume 53, Issue 8, 2021, Pages 4701-4716]
  • Aluminum oxide deposition Numerical Analysis of Cross Section Time Variation Effects of the Supersonic Exhaust Diffuser [Volume 53, Issue 3, 2021, Pages 1469-1486]
  • Analysis of variance Study and Optimization of Effective Parameters in The Occurrence of Blush Defect in The Plastic Injection Molding Process by Analysis of Variance [Volume 53, Issue 10, 2021, Pages 5293-5308]
  • Analytical model Analytical model for the non-premixed combustion of the titanium dust cloud in counter-flow geometry [Volume 53, Issue 5 (Special Issue), 2021, Pages 3307-3316]
  • Analytical Solution Analytical-Numerical Investigation of Unequal Sized Droplets of Dilatants' Fluid in T-Junction with Unequal Length Branches [Volume 53, Issue 3, 2021, Pages 1417-1438]
  • Analytical Solution Actuators redundancy resolution scheme with computational time reduction purpose for parallel cable robots with considering the rupture limits of the cables [Volume 53, Issue 6, 2021, Pages 3479-3496]
  • Angular Velocity of Nozzle Experimental Study of the Effect of Fluid Jet Swirl on Circular Hydraulic Jump [Volume 53, Issue 7, 2021, Pages 4153-4170]
  • Anisotropy Effect of 3D-Printing and Compression Molding on Anisotropy of Acrylonitrile Butadiene Styrene Micro Specimen: A Comparative Study Based on Digital Image Correlation [Volume 53, Issue 12, 2021, Pages 5645-5658]
  • ANSYS Passive Control of Vibrations of High-Rise Structure Using Tuned Liquid Damper under Wind and Earthquake Excitations [Volume 53, Issue 11, 2021, Pages 5367-5388]
  • ANSYS-AUTODYN Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Anti-Windup controller Unstable Aircraft Flight Control Based on Linear Matrix Inequality with Consideration of Control and Saturation Constraints [Volume 53, Issue 2, 2021, Pages 979-992]
  • Aqueous salt solution Design and Multi-Objective Optimization of A Magnetohydrodynamic Drug Delivery Infusion Micropump [Volume 53, Issue 10, 2021, Pages 5221-5238]
  • Architected structure Investigation of wave propagation in architected uniform triangle mass center fractal nano-bio-filters based on microtubules [Volume 53, Issue 6 (Special Issue), 2021, Pages 3939-3952]
  • Articulated Wings Altitude cascade control of an avian-like flapping robot considering articulated wings and quasi-steady [Volume 53, Issue 4, 2021, Pages 2137-2154]
  • Artificial graft Comparison of natural and synthetic carotid arteries in the normal and occluded cases considering the effect of blood on elastic wall of artery [Volume 53, Issue 5, 2021, Pages 2821-2838]
  • Assymetric T-junction Analytical-Numerical Investigation of Unequal Sized Droplets of Dilatants' Fluid in T-Junction with Unequal Length Branches [Volume 53, Issue 3, 2021, Pages 1417-1438]
  • Asymptotic development method Free vibration of axially functionally graded nanobeam with an attached mass based on nonlocal strain gradient theory via new ADM numerical method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1159-1178]
  • Atomic force microscopy Experimental Extraction of Young's Modulus of MCF-7 Breast Cancer Cell Using Spherical Contact Models [Volume 53, Issue 12, 2021, Pages 5769-5784]
  • Attitude control Attitude Stabilization of Quadrotor Using Adaptive Fuzzy Proportional Integral Derivative Controller [Volume 53, Issue 2 (Special Issue), 2021, Pages 1081-1094]
  • Attitude control Control of quadrotor by using state-dependent Riccati equation method and analyzing its dynamic performance under wind field [Volume 53, Issue 4 (Special Issue), 2021, Pages 2423-2438]
  • Avoidable exergy destruction Advanced exergy and thermoeconomic analysis of the supercritical carbon dioxide recompression cycle: A comparative study [Volume 53, Issue 5, 2021, Pages 2967-2982]
  • Axial compressor Effects of air injection at rotor blade row tip region of an axial compressor on its performance under inlet distortion conditions [Volume 53, Issue 3 (Special Issue), 2021, Pages 1729-1744]
  • Axial compressor A Theory for Predicting Stall Cell Transient Behavior [Volume 53, Issue 9, 2021, Pages 4773-4788]
  • Axial graded materials Investigation of the effect of longitudinal grading of material on vibrations of axially moving systems [Volume 53, Issue 2 (Special Issue), 2021, Pages 1197-1210]
  • Axially functionally graded Free vibration of axially functionally graded nanobeam with an attached mass based on nonlocal strain gradient theory via new ADM numerical method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1159-1178]
  • Axially graded material Parametric investigation of the size-dependent axially graded Rayleigh beams subjected to a moving load on Pasternak substrate [Volume 53, Issue 4, 2021, Pages 2171-2192]
  • Axial Turbine Experimental and Numerical Investigation of Film Cooling Effectiveness on Squealer Tip of a Turbine Blade [Volume 53, Issue 3, 2021, Pages 1521-1536]
  • Axisymmetric Combustion Evaluation of Combustion Models in a Porous Medium with Different Excess Air Ratios [Volume 53, Issue 1, 2021, Pages 65-80]
  • Azimuth angle Using nonlinear energy sink to improve the dynamic behavior of rectangular plate under supersonic aerodynamic flow at different angles [Volume 53, Issue 6, 2021, Pages 3511-3528]
  • Azimuth misalignment Fast initial alignment for inertial navigation system based on high order sliding mode observer and Kalman filter [Volume 53, Issue 6, 2021, Pages 3571-3586]

B

  • Bacillus subtilis and MS2 microorganism The Effect of Inner Walls Reflection on Microorganisms Inactivation in Water Ultraviolet Reactor using computational fluid dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 375-392]
  • Backward facing step Numerical analysis of the effect of baffle on heat transfer enhancement nanofluid flow over a backward facing step: A correlation for the average Nusselt number [Volume 53, Issue 7, 2021, Pages 4309-4328]
  • Ball Burnishing Process Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2021, Pages 5627-5644]
  • Ballistic A Study on the Ballistic Behavior of Kevlar Fabric Impregnated with Shear Thickening Fluid Containing Graphene Oxide Additive [Volume 53, Issue 12, 2021, Pages 5725-5738]
  • Ballistic resistance Investigation of penetration behavior of monolithic and multi-layered metallic targets subjected to a projectile impact [Volume 53, Issue 4, 2021, Pages 2309-2330]
  • Bandgap Investigation of wave propagation in architected uniform triangle mass center fractal nano-bio-filters based on microtubules [Volume 53, Issue 6 (Special Issue), 2021, Pages 3939-3952]
  • Base Excitation Global sensitivity analysis of nanomachining parameters by using dynamic scanning thermal microscope [Volume 53, Issue 4, 2021, Pages 2367-2384]
  • Beam-Like Structure Identification and damage detection of beam-like structure using vibration signals based on simulated model, real healthy state and deep convolutional neural network [Volume 53, Issue 4, 2021, Pages 2193-2216]
  • Bearing Fault Diagnosis Denoising vibration signals of rotating machines using probability density function, similarity measure and improved thresholding function [Volume 53, Issue 4 (Special Issue), 2021, Pages 2493-2512]
  • Bed hydrodynamics Modeling the calcium looping process with an emphasis on the bed hydrodynamics and sorbent characteristics [Volume 53, Issue 5, 2021, Pages 2807-2820]
  • Bellows Study of the Analytical Solutions and Modelling of Nonlinear Buckling in Bellows [Volume 53, Issue 2, 2021, Pages 729-744]
  • Bending strip method Free vibration analysis of functionally graded carbon nanotubes reinforced composite skew folded plates using the isogeometric approach [Volume 53, Issue 4, 2021, Pages 2239-2260]
  • Bi-directional functionally graded materials Investigating the Influence of Higher-Order Boundary Conditions on Free Vibrations of Bi-Directional Functionally Graded Thick Conical Micro-Shells [Volume 53, Issue 10, 2021, Pages 5085-5104]
  • Bi-evaporator Design and evaluation of a novel bi-evaporator combined power and refrigeration cycle working with various zeotropic mixtures [Volume 53, Issue 5, 2021, Pages 3003-3022]
  • Bingham fluid Numerical simulation of mixed convection of Bingham fluid between two coaxial cylinders [Volume 53, Issue 5 (Special Issue), 2021, Pages 3417-3428]
  • Biogas Techno-Economic Feasibility of Energy Supply Systems from Renewable Sources of Solar and Biomass in Rural Areas Located In Cold and Dry Climate [Volume 53, Issue 1, 2021, Pages 81-100]
  • Biosensor Design and simulation of a biosensor based on a microelectromechanical resonator array [Volume 53, Issue 6 (Special Issue), 2021, Pages 3841-3854]
  • Blade element momentum Development of Blade Element Momentum Theory for Unsteady Flow with Regard to the Dynamic Stall Phenomenon [Volume 53, Issue 3, 2021, Pages 1439-1456]
  • Blade Tip Geometry A numerical investigation on the effect of blade tip shapes on power generation of a horizontal axis wind turbine [Volume 53, Issue 5, 2021, Pages 2791-2806]
  • Bloch’s theorem Investigation of wave propagation in architected uniform triangle mass center fractal nano-bio-filters based on microtubules [Volume 53, Issue 6 (Special Issue), 2021, Pages 3939-3952]
  • Blood flow Comparison of natural and synthetic carotid arteries in the normal and occluded cases considering the effect of blood on elastic wall of artery [Volume 53, Issue 5, 2021, Pages 2821-2838]
  • Blowing method Effect of blowing on flow-induced noise reduction in a rod-airfoil [Volume 53, Issue 3 (Special Issue), 2021, Pages 1783-1798]
  • Bluff body Numerical Investigation of the Influence of Burner’s Bluff Body on Air-Fuel Mixing and Reaction [Volume 53, Issue 9, 2021, Pages 4981-4998]
  • Blush defect Study and Optimization of Effective Parameters in The Occurrence of Blush Defect in The Plastic Injection Molding Process by Analysis of Variance [Volume 53, Issue 10, 2021, Pages 5293-5308]
  • BMD mapping Prediction of femoral fracture pattern using finite element analysis of dual-energy X-ray absorptiometry -based model [Volume 53, Issue 2 (Special Issue), 2021, Pages 1223-1236]
  • Boiling Analysis of Density Wave Oscillations in a Boiling Channel by a New Analytical Model [Volume 53, Issue 3, 2021, Pages 1505-1520]
  • Boiling Modeling and parametric analysis of two-phase fluid stability in boiling process in a thermal channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1861-1882]
  • Bolted Joints Experimental and Numerical Looseness Detection and Assessment in Flanged Joints Using Vibro-Acoustic Modulation Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1331-1344]
  • Bolted joint vibrations Analytical Study on Effect of Loosening on Nonlinear Vibration Behavior of Bolted Joints [Volume 53, Issue 12, 2021, Pages 5739-5754]
  • Bond graph Designing Optimum Multi-Domain System by Integrating Bond Graph and Genetic Programming [Volume 53, Issue 2, 2021, Pages 1015-1038]
  • Bone Mechanical Properties and Structural Behavior of Bone at Nano Scale with Cohesive Element [Volume 53, Issue 2, 2021, Pages 745-776]
  • Bone fracture The Prediction of Femoral Fracture Location Using Extended Finite Element Method [Volume 53, Issue 8, 2021, Pages 4595-4608]
  • Borehole heat exchanger Comparison of axial and radial soil temperature distribution in U-tube and coaxial borehole heat exchangers [Volume 53, Issue 7, 2021, Pages 4361-4378]
  • Boron-nitride nanotube Analyzing the effect of adsorption of Flavin Mononucleotide biomolecule on the natural frequency of biocompatible boron-nitride nanotubes [Volume 53, Issue 4 (Special Issue), 2021, Pages 2577-2588]
  • Boundary Layer Numerical Analysis of Parameters Affecting Turbulent Boundary Layer Trailing-Edge Noise [Volume 53, Issue 1 (Special Issue), 2021, Pages 437-452]
  • Box-wing Modeling and Flutter Analysis of a Three Dimensional Box-Wing using Wagner Unsteady Aerodynamic Model [Volume 53, Issue 12, 2021, Pages 5809-5830]
  • Breathing Crack Investigation of Nonlinear Vibrations of A Cantilever Beam with A Transverse Fatigue Crack [Volume 53, Issue 10, 2021, Pages 5069-5084]
  • Bridge mode shape Experimental verification of indirect bridge mode shape identification using transmissibility of a passing vehicle [Volume 53, Issue 6, 2021, Pages 3529-2548]
  • Buckling analysis Effect of adding carbon nanotubes into the matrix material on the buckling behavior of glass/epoxy composite plates: An experimental study [Volume 53, Issue 4 (Special Issue), 2021, Pages 2613-2628]
  • Building energy simulation Accurate and faster than real-time simulation of indoor airflow by using fast fluid dynamics [Volume 53, Issue 3 (Special Issue), 2021, Pages 1839-1860]
  • Buongiorno two-phase model Numerical analysis of flow and natural convection heat transfer in a circular enclosure heated from bottom utilizing porous layer [Volume 53, Issue 3 (Special Issue), 2021, Pages 1937-1962]
  • Burnishing Forces Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2021, Pages 5627-5644]

C

  • Calcium looping Modeling the calcium looping process with an emphasis on the bed hydrodynamics and sorbent characteristics [Volume 53, Issue 5, 2021, Pages 2807-2820]
  • Calcium oxide sorbent Modeling the calcium looping process with an emphasis on the bed hydrodynamics and sorbent characteristics [Volume 53, Issue 5, 2021, Pages 2807-2820]
  • Cancer Control of the Amount of Oncolytic Virus Injection by Considering Time Delay [Volume 53, Issue 2 (Special Issue), 2021, Pages 1125-1136]
  • Capacitive deionization Simulation of Effective Parameters on Desalination Water Using Capacitive Deionization Method [Volume 53, Issue 11, 2021, Pages 5595-5612]
  • Capillary network Image-based numerical model for drug delivery to solid tumors [Volume 53, Issue 5 (Special Issue), 2021, Pages 3187-3200]
  • Carbonator Modeling the calcium looping process with an emphasis on the bed hydrodynamics and sorbent characteristics [Volume 53, Issue 5, 2021, Pages 2807-2820]
  • Carbon-epoxy composite Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]
  • Carbon monoxide Investigating the Effects of Loung Chair Fire in a Cinema Hall Using Displacement, Impingement Jet and Stratum Ventilation Systems [Volume 53, Issue 11, 2021, Pages 5573-5594]
  • Carbon Nanotube Effect of adding carbon nanotubes into the matrix material on the buckling behavior of glass/epoxy composite plates: An experimental study [Volume 53, Issue 4 (Special Issue), 2021, Pages 2613-2628]
  • Carbon Nanotube Investigation on Mechanical Properties of Polyoxymethylene Reinforced by Carbon Nanotube Using Molecular Dynamics [Volume 53, Issue 8, 2021, Pages 4691-4700]
  • Carbon Nanotube Thermal Stress Analysis of the Carbon Nanotube Reinforced Composite Cylindrical Shells [Volume 53, Issue 10, 2021, Pages 5269-5292]
  • Carbon nanotubes Free vibration analysis of functionally graded carbon nanotubes reinforced composite skew folded plates using the isogeometric approach [Volume 53, Issue 4, 2021, Pages 2239-2260]
  • Carotid artery Comparison of natural and synthetic carotid arteries in the normal and occluded cases considering the effect of blood on elastic wall of artery [Volume 53, Issue 5, 2021, Pages 2821-2838]
  • Carotid artery The Effect of Non-Newtonian Behavior on the Transport of Low Density Lipoprotein Particles in the Vortex Region in the Human Carotid Artery [Volume 53, Issue 9, 2021, Pages 4789-4806]
  • Carreau-Bird model Stability analysis of shear-thinning flow in narrow gap Taylor–Couette axial flow [Volume 53, Issue 3 (Special Issue), 2021, Pages 1745-1766]
  • Cartesian transformation method Nonlinear Transient Heat Transfer Analysis Using Two Integration Methods with Different Distributions of Integration Points in the Domain in a Meshless Formulation [Volume 53, Issue 1 (Special Issue), 2021, Pages 553-572]
  • Cascade control Altitude cascade control of an avian-like flapping robot considering articulated wings and quasi-steady [Volume 53, Issue 4, 2021, Pages 2137-2154]
  • Casing Treatment Circumferential Casing Treatment in a Transonic Fan [Volume 53, Issue 7, 2021, Pages 4189-4202]
  • Catalyst Simulation of a Photocatalytic Reactor Using Finite Volume and Discrete Ordinate Method: A Parametric Study [Volume 53, Issue 1 (Special Issue), 2021, Pages 573-588]
  • Cavitation Investigation on flow air concentration effect on distance of the chute spillway aerators [Volume 53, Issue 5 (Special Issue), 2021, Pages 3135-3150]
  • Cavitation inception Study of cavitation inception using multiphase lattice Boltzmann method with incorporating equations of state [Volume 53, Issue 5 (Special Issue), 2021, Pages 3151-3170]
  • Cavity Investigation of Geometric Characteristics on the Non-Reaction Supersonic Flow inside the Channel with the Presence of Cavities [Volume 53, Issue 11, 2021, Pages 5409-5428]
  • Cell mechanics Response analysis of primary cilia of the cell to the oscillatory fluid flow by using fluid-structure interaction method [Volume 53, Issue 5 (Special Issue), 2021, Pages 3293-3306]
  • Cell separation Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Central pattern generation Robust and Adaptive Control of an Exoskeleton Robot For Tracking Modified Desired Trajectory Based on Zero Moment Point Stability Theory [Volume 53, Issue 12, 2021, Pages 5831-5850]
  • Centrifugal Microfluidics Design, Fabrication and Experimental Study of Spiral Microchannel Particle Separator on Centrifugal Microfluidic Platforms [Volume 53, Issue 3, 2021, Pages 1359-1372]
  • Chaotic vibrations Numerical analysis of chaotic dynamics in vehicle along with design of chaos controller using fuzzy fast terminal sliding mode control [Volume 53, Issue 4 (Special Issue), 2021, Pages 2539-2556]
  • Chemical Kinetic Evaluation of Combustion Models in a Porous Medium with Different Excess Air Ratios [Volume 53, Issue 1, 2021, Pages 65-80]
  • Chemiluminescence Experimental Investigation of Combustion Species Radiation to Evaluate Equivalence Ratio in a Surface Flame Burner [Volume 53, Issue 1, 2021, Pages 41-52]
  • Chemotherapy Image-based numerical model for drug delivery to solid tumors [Volume 53, Issue 5 (Special Issue), 2021, Pages 3187-3200]
  • Cho motor model Control of Vehicle’s Mixed Longitudinal and Lateral Stability with Engine Dynamics Using Super Twisting Control Algorithm [Volume 53, Issue 2, 2021, Pages 959-978]
  • Chute spillway Investigation on flow air concentration effect on distance of the chute spillway aerators [Volume 53, Issue 5 (Special Issue), 2021, Pages 3135-3150]
  • Circular Hydraulic Jump Experimental Study of the Effect of Fluid Jet Swirl on Circular Hydraulic Jump [Volume 53, Issue 7, 2021, Pages 4153-4170]
  • Circular plate Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 4023-4050]
  • Circumferential groove Circumferential Casing Treatment in a Transonic Fan [Volume 53, Issue 7, 2021, Pages 4189-4202]
  • Circumflex branch of the left coronary Numerical study of the effect of left coronary artery stenosis on vascular tissue oxygenation [Volume 53, Issue 3 (Special Issue), 2021, Pages 1767-1782]
  • Clap and fling mechanism Modeling and linearization of longitudinal dynamics for a flapping wing micro aerial vehicle dragonfly-like with active rigid tail [Volume 53, Issue 6, 2021, Pages 3445-3464]
  • Classification Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]
  • Cleaner robot photovoltaic panels Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Clear Air Turbulence Diagnostical and observational analysis of clear air turbulence over the middle east and Iran [Volume 53, Issue 7, 2021, Pages 4203-4220]
  • Closed-cell foams A new method for estimating the compressive strain of cellular structures using microstructure of foams based on Laguerre tessellations [Volume 53, Issue 6, 2021, Pages 3629-3644]
  • Cloud cover factor Numerical simulation of salt gradient solar pond by employing the solar radiation estimating function considering wall-shading effects [Volume 53, Issue 5 (Special Issue), 2021, Pages 3385-3400]
  • Coaxial heat exchanger Comparison of axial and radial soil temperature distribution in U-tube and coaxial borehole heat exchangers [Volume 53, Issue 7, 2021, Pages 4361-4378]
  • Cogeneration Thermo-Economic Evaluation of a Power and Freshwater Production System Including a Liquid Metal Magnetohydrodynamic Unit Driven By a Concentrated Solar Tower and Biogas [Volume 53, Issue 11, 2021, Pages 5551-5572]
  • Cold exergy Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Combined cycle Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]
  • Combined parametric and external excitations Nonlinear Electro-aero-elastic Vibration Analysis of a Nanocomposite Laminated Trapezoidal Actuator [Volume 53, Issue 2 (Special Issue), 2021, Pages 1137-1158]
  • Combustion chamber Numerical Simulation of Liner Vibrations in a Laboratory Combustion Chamber [Volume 53, Issue 2, 2021, Pages 881-896]
  • Combustion of particles Analytical model for the non-premixed combustion of the titanium dust cloud in counter-flow geometry [Volume 53, Issue 5 (Special Issue), 2021, Pages 3307-3316]
  • Commercial large-scale wind turbine Power Improvement of a Commercial Large Scale Vertical-Axis Wind Turbine Using Plasma Actuators [Volume 53, Issue 3, 2021, Pages 1487-1504]
  • Compartment fire Comparison study of compartment fire simulation with steady laminar flamelet and eddy dissipation model [Volume 53, Issue 5, 2021, Pages 2953-2966]
  • Compartment fire Numerical investigation of compartment fire under maximum and minimum of natural ventilation using flamelet generated manifold combustion model [Volume 53, Issue 5 (Special Issue), 2021, Pages 3335-3350]
  • Compliant mechanism A new optimal structural boundary modification algorithm in the multi-objective topology optimization of microgripper [Volume 53, Issue 4, 2021, Pages 2261-2270]
  • Compression ignition engine Effect of Start of Injection Timing on Waste Heat Recovery Capacity in a Reactivity Controlled Compression Ignition Engine [Volume 53, Issue 1, 2021, Pages 3-16]
  • Compression strain A new method for estimating the compressive strain of cellular structures using microstructure of foams based on Laguerre tessellations [Volume 53, Issue 6, 2021, Pages 3629-3644]
  • Computational fluid dynamic Improving the power coefficient of the Darrieus vertical axis wind turbine with the aid of morphing airfoils [Volume 53, Issue 5 (Special Issue), 2021, Pages 3227-3240]
  • Computational fluid dynamic Improvement of aerodynamic coefficients of the airfoil with free form deformation with the aid of Artificial Neural Networks and Genetic Algorithm [Volume 53, Issue 7, 2021, Pages 4113-4132]
  • Computer fluid dynamics Optimization of The Slotted Gurney-Flap Geometry Applied to NACA 0012 Airfoil for Aerodynamic Performance Improvement [Volume 53, Issue 11, 2021, Pages 5331-5348]
  • Computer Vision A Fast Warehouse Inventory Micro Aerial Vehicle System Equipped with Visual Guidance and Navigation Algorithm [Volume 53, Issue 12, 2021, Pages 5785-5808]
  • COMSOL Multiphysics Software Simulation of Pitting Corrosion on Gas Turbine Compressor Blade [Volume 53, Issue 10, 2021, Pages 5123-5140]
  • Concave surface Study of the Flow and Heat Transfer of Pulsed Sinusoidal Impinging Jet at Distances Close To the Concave Surface [Volume 53, Issue 9, 2021, Pages 4943-4960]
  • Concentrating solar power Thermo-Economic Evaluation of a Power and Freshwater Production System Including a Liquid Metal Magnetohydrodynamic Unit Driven By a Concentrated Solar Tower and Biogas [Volume 53, Issue 11, 2021, Pages 5551-5572]
  • Condenser active length Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Condition monitoring Condition monitoring of defective single lap adhesive joint using carbon nanotubes [Volume 53, Issue 2 (Special Issue), 2021, Pages 1321-1330]
  • Condition monitoring Identification and damage detection of beam-like structure using vibration signals based on simulated model, real healthy state and deep convolutional neural network [Volume 53, Issue 4, 2021, Pages 2193-2216]
  • Condition monitoring Damage detection of offshore jacket structure using dynamic responses based on simulated model, intact state of real model and deep auto-encoder neural network [Volume 53, Issue 6 (Special Issue), 2021, Pages 3783-3808]
  • Condition monitoring Prognostics of rolling element bearings using shock pulse method and vibration method records and employing feedforward neural-network [Volume 53, Issue 4 (Special Issue), 2021, Pages 2557-2576]
  • Conduction Solution of the Isotropic Heat Equation Using the Finite Volume Monte Carlo Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 467-482]
  • Cone Analytical Solution of Heat Transfer in a Cone Made of Functionally Graded Material [Volume 53, Issue 1 (Special Issue), 2021, Pages 539-552]
  • Conical micro-shells Investigating the Influence of Higher-Order Boundary Conditions on Free Vibrations of Bi-Directional Functionally Graded Thick Conical Micro-Shells [Volume 53, Issue 10, 2021, Pages 5085-5104]
  • Conical shell Transient Analysis and Free Vibration of Functionally Graded Truncated Conical Shells Subjected to Moving Pressure [Volume 53, Issue 2, 2021, Pages 897-912]
  • Constant Blowing Implementation of Continuous Blowing and Synthetic Jet Actuators to Control the Flow Separation over a Fully Stalled Airfoil [Volume 53, Issue 9, 2021, Pages 4847-4864]
  • Constant curvature Kinematic Modeling of a Spatial Soft Robot by an Improved Analytical Method Based on Serial Robots [Volume 53, Issue 2 (Special Issue), 2021, Pages 1065-1080]
  • Contact acoustics nonlinearity Modeling of vibro-acoustic modulation induced by non-linear contact in the Euler-Bernoulli beam using the Fourier spectral element [Volume 53, Issue 6 (Special Issue), 2021, Pages 3809-3824]
  • Contact Stiffness An Experimental Approach for Determination of Locators Reaction Forces in Milling Fixtures [Volume 53, Issue 12, 2021, Pages 5615-5626]
  • Continuum Damage Mechanics Reliability analysis of rectangular plate under in-plane tensile loading using continuum damage mechanics theory [Volume 53, Issue 6, 2021, Pages 3645-3656]
  • Continuum robot Stability analysis and snap-through evaluation of the cable-driven continuum robots [Volume 53, Issue 4, 2021, Pages 2089-2104]
  • Control Control of the Amount of Oncolytic Virus Injection by Considering Time Delay [Volume 53, Issue 2 (Special Issue), 2021, Pages 1125-1136]
  • Control constraint Unstable Aircraft Flight Control Based on Linear Matrix Inequality with Consideration of Control and Saturation Constraints [Volume 53, Issue 2, 2021, Pages 979-992]
  • Convection-Diffusion equation Development of parametric and time dependent reduced order model for diffusion and convection-diffusion problems based on proper orthogonal decomposition method [Volume 53, Issue 7, 2021, Pages 4241-4260]
  • Convection heat transfer Experimental investigation of heat transfer and pressure drop in perforated ribs in the solar air heater channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1981-2000]
  • Convection-radiation boundary conditions Nonlinear Transient Heat Transfer Analysis Using Two Integration Methods with Different Distributions of Integration Points in the Domain in a Meshless Formulation [Volume 53, Issue 1 (Special Issue), 2021, Pages 553-572]
  • Corrected explicit-implicit domain decomposition algorithm Developing an alternating direction explicit-implicit domain-decomposition approach to solve heat transfer equation on graphics processing unit [Volume 53, Issue 3 (Special Issue), 2021, Pages 1915-1936]
  • Corrugated Experimental investigation on MWCNTs-COOH nano fluid on 3D oscillating heat pipe [Volume 53, Issue 5 (Special Issue), 2021, Pages 3401-3416]
  • Corrugated beam Finite Element Modeling of a Novel Magnetic Shape Memory Alloy Based Energy Harvester Using a Corrugated Beam and Investigating the Effective Parameters [Volume 53, Issue 2, 2021, Pages 799-814]
  • Co-simulation of software Combination of active braking and semi-active suspension systems to improve the roll and yaw vehicle stability [Volume 53, Issue 6, 2021, Pages 3549-3570]
  • Counter-flow Analytical model for the non-premixed combustion of the titanium dust cloud in counter-flow geometry [Volume 53, Issue 5 (Special Issue), 2021, Pages 3307-3316]
  • Coupling Network Modeling to Investigate the Effect of Coupling the Transport Phenomena on Water Distribution in Gas Diffusion Layer [Volume 53, Issue 11, 2021, Pages 5505-5528]
  • Crack Investigation of Crack Growth in Deposited and Perfect Titanium/Titanium Nitride Structure by Molecular Dynamic Simulation [Volume 53, Issue 2, 2021, Pages 833-850]
  • Crack Laser Cladding of TiC/316LSS and Analysis of Input Parameters using Response Surface Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1269-1286]
  • Crack bilinear behavior Investigation of Nonlinear Vibrations of A Cantilever Beam with A Transverse Fatigue Crack [Volume 53, Issue 10, 2021, Pages 5069-5084]
  • Critical Flow Velocity Instability and frequency sensitivity analysis of single-walled carbon nanotubes conveying fluid under thermomagnetic field considering the surface effect [Volume 53, Issue 6 (Special Issue), 2021, Pages 3875-3890]
  • Critical heat flux Experimental study of CuO/Water nanofluid pool boiling on the copper flat surface and measurement of the critical heat flux [Volume 53, Issue 5, 2021, Pages 3099-3114]
  • Critical load Experimental and theoretical investigation of the critical load of U-notched laminated composite specimens under in-plane shear loading [Volume 53, Issue 6, 2021, Pages 3673-3688]
  • Critical Velocity Investigation of the effect of longitudinal grading of material on vibrations of axially moving systems [Volume 53, Issue 2 (Special Issue), 2021, Pages 1197-1210]
  • Critical velocity of loading Parametric investigation of the size-dependent axially graded Rayleigh beams subjected to a moving load on Pasternak substrate [Volume 53, Issue 4, 2021, Pages 2171-2192]
  • Crop evapotranspiration Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Cryogenic propellants Influence of Pseudo-Boiling Phenomenon and the Mass Flux Ratio on the Dynamics of Transcritical Shear Flame [Volume 53, Issue 9, 2021, Pages 4961-4980]
  • Crystallization process Removal of Lead Heavy Metal from Wastewater by Crystallization Process and Investigation of the Effective Parameters [Volume 53, Issue 11, 2021, Pages 5349-5366]
  • Crystal Plasticity Effect of microstructure features on the mechanical properties of spheroidized steel by crystal plasticity method. [Volume 53, Issue 6 (Special Issue), 2021, Pages 4079-4094]
  • Crystal Plasticity Crystal Plasticity Finite Element Study of Necking Behavior of Aluminum Alloy Sheet Subject to Thickness-Stress [Volume 53, Issue 12, 2021, Pages 5755-5768]
  • Cubature Kalman filter Modified Variable Structure Estimation and Control for Constrained Landing on Mars [Volume 53, Issue 10, 2021, Pages 5055-5068]
  • CuO-water nanofluids Experimental study of CuO/Water nanofluid pool boiling on the copper flat surface and measurement of the critical heat flux [Volume 53, Issue 5, 2021, Pages 3099-3114]
  • CUSTOM 450 alloy Simulation of Pitting Corrosion on Gas Turbine Compressor Blade [Volume 53, Issue 10, 2021, Pages 5123-5140]
  • Cutting and edge force coefficients Mechanistic modeling of cutting forces in milling process by end milling with cutting edges with adjustment angle of 45 degree [Volume 53, Issue 4 (Special Issue), 2021, Pages 2703-2718]
  • Cutting Forces Experimental study of machining residual stresses in plasma-assisted turning process [Volume 53, Issue 4, 2021, Pages 2385-2406]
  • Cyber Physical Systems A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Cylindrical heat source Numerical Study of Natural Convection Heat Transfer inside a Triangular Cavity with Flexible Sidewalls Containing a Cylindrical Heat Source [Volume 53, Issue 11, 2021, Pages 5461-5484]
  • Cylindrical Piers Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Cylindrical shell Thermal Stress Analysis of the Carbon Nanotube Reinforced Composite Cylindrical Shells [Volume 53, Issue 10, 2021, Pages 5269-5292]
  • Cylindrical Shells Free and Forced Vibration Analysis of Stiffened Cylindrical Shells under Moving Internal Pressure [Volume 53, Issue 12, 2021, Pages 5867-5886]

D

  • Damage Finite element modeling of shape memory alloy stent insertion in the vessel with consideration of vessel damage [Volume 53, Issue 2 (Special Issue), 2021, Pages 1211-1222]
  • Damage Mechanics Micromechanical Damage Model for Plasticity of ‎Metals to Predict Failure under Shear Loads [Volume 53, Issue 12, 2021, Pages 5679-5702]
  • Damage Mechanics Numerical Simulation of Elastoplastic Behavior and Damage Evolution at Various Stress Triaxiality [Volume 53, Issue 12, 2021, Pages 5703-5724]
  • Damage sensing؛ Carbon nanotube Condition monitoring of defective single lap adhesive joint using carbon nanotubes [Volume 53, Issue 2 (Special Issue), 2021, Pages 1321-1330]
  • DAMPING Design and simulation of a biosensor based on a microelectromechanical resonator array [Volume 53, Issue 6 (Special Issue), 2021, Pages 3841-3854]
  • Damping force Manufacturing and Testing of an Optimized Magneto-Rheological Fluid and Modelling of a Twin Tube Magneto-Rheological Damper Using a Modified Non-Newtonian Model Using Analytical Quasi-Static, Analytical Unsteady, Numerical and Experimental Methods [Volume 53, Issue 3, 2021, Pages 1373-1400]
  • Darcy-Brinkman-Forchheimer model Numerical simulation of nanofluid flow in an annulus with porous baffles based on combination of Darcy-Brinkman-Forchheimer model and two-phase mixture model [Volume 53, Issue 3 (Special Issue), 2021, Pages 1897-1914]
  • Darrieus Experimental study on effective parameters on vertical axis wind turbine performance [Volume 53, Issue 5, 2021, Pages 2771-2790]
  • Darrieus wind turbine Improving the power coefficient of the Darrieus vertical axis wind turbine with the aid of morphing airfoils [Volume 53, Issue 5 (Special Issue), 2021, Pages 3227-3240]
  • Darrieus wind turbine Improvement of aerodynamic coefficients of the airfoil with free form deformation with the aid of Artificial Neural Networks and Genetic Algorithm [Volume 53, Issue 7, 2021, Pages 4113-4132]
  • Data Dropout Stability Analysis of Predictive Control in Networked Control System Using Switching Control [Volume 53, Issue 10, 2021, Pages 5039-5054]
  • Data loss Control of heterogeneous traffic flows in presence of pocket loss, time-varying communication delay and actuator lag [Volume 53, Issue 4, 2021, Pages 2155-2170]
  • Dead-end performance Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Deep learning A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Deep Neural Network Identification and damage detection of beam-like structure using vibration signals based on simulated model, real healthy state and deep convolutional neural network [Volume 53, Issue 4, 2021, Pages 2193-2216]
  • Deep Neural Network Damage detection of offshore jacket structure using dynamic responses based on simulated model, intact state of real model and deep auto-encoder neural network [Volume 53, Issue 6 (Special Issue), 2021, Pages 3783-3808]
  • Density layer thickness Numerical simulation of Holmboe waves in intrusive gravity current using LES method [Volume 53, Issue 7, 2021, Pages 4261-4278]
  • Density wave oscillations Analysis of Density Wave Oscillations in a Boiling Channel by a New Analytical Model [Volume 53, Issue 3, 2021, Pages 1505-1520]
  • Depth of field Modeling of the pilot's depth perception algorithm to avoid collisions with obstacles for commercial aircraft landing [Volume 53, Issue 6, 2021, Pages 3497-3510]
  • Depth perception Modeling of the pilot's depth perception algorithm to avoid collisions with obstacles for commercial aircraft landing [Volume 53, Issue 6, 2021, Pages 3497-3510]
  • Desiccant Cooling System Dynamic Simulation of Desiccant Cooling System with Simultaneously Using Solar and Ground Renewable Energies in Hot-Humid Regions [Volume 53, Issue 3, 2021, Pages 1549-1572]
  • Design and Manufacturing Simulation, manufacturing and test of a transparent proton-exchange membrane fuel cell [Volume 53, Issue 3 (Special Issue), 2021, Pages 2031-2052]
  • Dew point Investigation of the Humidifier Performance of Adding Gas Diffusion Layers Around Membrane for Fuel Cell Application [Volume 53, Issue 3, 2021, Pages 1653-1666]
  • Die cast Thermal stress analysis for an aluminum die cast die [Volume 53, Issue 4 (Special Issue), 2021, Pages 2687-2702]
  • Dielectrophoresis Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Differential quadrature method Transient Analysis and Free Vibration of Functionally Graded Truncated Conical Shells Subjected to Moving Pressure [Volume 53, Issue 2, 2021, Pages 897-912]
  • Differential quadrature method Free vibration and flexural-torsional stability analyses of axially functionally graded tapered thin-walled beam resting on elastic foundation [Volume 53, Issue 6, 2021, Pages 3587-3614]
  • Differential quadrature method Flutter reliability analysis of laminated composite plates [Volume 53, Issue 6 (Special Issue), 2021, Pages 3925-3938]
  • Differential quadrature method Lateral Stability Analysis of Thin-Walled Fiber-Metal Laminate Beam with Varying Cross-Section by Considering Nonlinear Strains [Volume 53, Issue 10, 2021, Pages 5239-5268]
  • Diffusion Equation Development of parametric and time dependent reduced order model for diffusion and convection-diffusion problems based on proper orthogonal decomposition method [Volume 53, Issue 7, 2021, Pages 4241-4260]
  • Digital image correlation Effect of 3D-Printing and Compression Molding on Anisotropy of Acrylonitrile Butadiene Styrene Micro Specimen: A Comparative Study Based on Digital Image Correlation [Volume 53, Issue 12, 2021, Pages 5645-5658]
  • Digital Image Processing Simulation, manufacturing and test of a transparent proton-exchange membrane fuel cell [Volume 53, Issue 3 (Special Issue), 2021, Pages 2031-2052]
  • Digital Microfluidics Design and simulation of a biosensor based on a microelectromechanical resonator array [Volume 53, Issue 6 (Special Issue), 2021, Pages 3841-3854]
  • Dilution Laser Cladding of TiC/316LSS and Analysis of Input Parameters using Response Surface Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1269-1286]
  • Dimensional analysis Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 4023-4050]
  • Discrete Concrete Targets Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Discrete ordinates model The Effect of Inner Walls Reflection on Microorganisms Inactivation in Water Ultraviolet Reactor using computational fluid dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 375-392]
  • Discrete-time system Fault detection and isolation based on robust Kalman filter for discrete-time systems with stochastic and norm-bounded uncertainties [Volume 53, Issue 6 (Special Issue), 2021, Pages 3825-3840]
  • Dislocation-blocking Effect of Graphene Sheets Aggregation on The Dislocation-Blocking Mechanism of Nanolaminated Aluminum/Graphene Composite: Molecular Dynamics Simulation Study [Volume 53, Issue 8, 2021, Pages 4649-4664]
  • Dispersion relation Investigation of wave propagation in architected uniform triangle mass center fractal nano-bio-filters based on microtubules [Volume 53, Issue 6 (Special Issue), 2021, Pages 3939-3952]
  • Displacement rate Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]
  • Double-ended cooling Experimental Investigation on the Thermal Resistance of Straight Heat Pipes with Double-Ended Cooling and Middle-Heating at Different Tilt Angles [Volume 53, Issue 1, 2021, Pages 279-302]
  • Double Hyperbolic Sliding Surface Double Hyperbolic Sliding Mode Control Based on Unscented Kalman Filter for Three-legged Mobile manipulator [Volume 53, Issue 4, 2021, Pages 2105-2116]
  • Double phase steel Effect of microstructure features on the mechanical properties of spheroidized steel by crystal plasticity method. [Volume 53, Issue 6 (Special Issue), 2021, Pages 4079-4094]
  • Double pipe helical heat exchanger Numerical Simulation of Heat Transfer Turbulent Flow for Non-Newtonian Nanofluid in a Double Pipe Helical Heat Exchanger [Volume 53, Issue 1, 2021, Pages 221-240]
  • Draught discomfort Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Draught discomfort Experimental investigation of personalized ventilation effects on temperature, velocity, and draught discomfort distribution in an office [Volume 53, Issue 7, 2021, Pages 4397-4410]
  • Drilling Cuttings Transport Modeling of Drilling Cuttings Transport by Foam in Horizontal Well Condition Using Computational Fluid Dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 357-374]
  • Driving accidents Analyzing driving behavior based on vehicle information logging using MPU6050 [Volume 53, Issue 6 (Special Issue), 2021, Pages 3855-3874]
  • Driving behavior Analyzing driving behavior based on vehicle information logging using MPU6050 [Volume 53, Issue 6 (Special Issue), 2021, Pages 3855-3874]
  • Driving criteria Analyzing driving behavior based on vehicle information logging using MPU6050 [Volume 53, Issue 6 (Special Issue), 2021, Pages 3855-3874]
  • Driving cycle Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]
  • Drug delivery Image-based numerical model for drug delivery to solid tumors [Volume 53, Issue 5 (Special Issue), 2021, Pages 3187-3200]
  • Drug infusion Design and Multi-Objective Optimization of A Magnetohydrodynamic Drug Delivery Infusion Micropump [Volume 53, Issue 10, 2021, Pages 5221-5238]
  • Dual-Energy X-ray Absorptiometry Prediction of femoral fracture pattern using finite element analysis of dual-energy X-ray absorptiometry -based model [Volume 53, Issue 2 (Special Issue), 2021, Pages 1223-1236]
  • Dual fingers Grasp Planar Object Manipulation with Multi Fingers Robot Located on a Moving Hand Under Rolling Grasp Constrains [Volume 53, Issue 2, 2021, Pages 943-958]
  • Dual Fuel Investigation of the response of a multi-zone simulation code equipped with blow-by sub-model in a dual fuel spark-ignition engine [Volume 53, Issue 5, 2021, Pages 3035-3056]
  • Dual phase steel Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Duct Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Ductile Damage Analysis of Forming Limit of Sheet Metals Considering Vertex Localized Necking and Ductile Damage Criterion [Volume 53, Issue 2 (Special Issue), 2021, Pages 1307-1320]
  • Ductile fracture Numerical Simulation of Elastoplastic Behavior and Damage Evolution at Various Stress Triaxiality [Volume 53, Issue 12, 2021, Pages 5703-5724]
  • Dugoff tire model Control of Vehicle’s Mixed Longitudinal and Lateral Stability with Engine Dynamics Using Super Twisting Control Algorithm [Volume 53, Issue 2, 2021, Pages 959-978]
  • Dynamic analysis Free and Forced Vibration Analysis of Stiffened Cylindrical Shells under Moving Internal Pressure [Volume 53, Issue 12, 2021, Pages 5867-5886]
  • Dynamic behavior Using nonlinear energy sink to improve the dynamic behavior of rectangular plate under supersonic aerodynamic flow at different angles [Volume 53, Issue 6, 2021, Pages 3511-3528]
  • Dynamic instability Analysis of dynamic instability in sandwich thick beams with flexible functional core subjected to a follower force [Volume 53, Issue 2, 2021, Pages 863-880]
  • Dynamic Mesh Method Numerical Analysis of Cross Section Time Variation Effects of the Supersonic Exhaust Diffuser [Volume 53, Issue 3, 2021, Pages 1469-1486]
  • Dynamic Performance Dynamic Simulation of Desiccant Cooling System with Simultaneously Using Solar and Ground Renewable Energies in Hot-Humid Regions [Volume 53, Issue 3, 2021, Pages 1549-1572]
  • Dynamics Kinematic and dynamic performance evaluation of a four degrees of freedom parallel robot [Volume 53, Issue 4, 2021, Pages 2055-2072]
  • Dynamics modeling Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Dynamic Stall Development of Blade Element Momentum Theory for Unsteady Flow with Regard to the Dynamic Stall Phenomenon [Volume 53, Issue 3, 2021, Pages 1439-1456]

E

  • Earthquake Passive Control of Vibrations of High-Rise Structure Using Tuned Liquid Damper under Wind and Earthquake Excitations [Volume 53, Issue 11, 2021, Pages 5367-5388]
  • Eddy Experimental Investigation of the Performance of Trailing Edge Noise-Reducing Finlets [Volume 53, Issue 9, 2021, Pages 4827-4846]
  • Eddy dissipation model Comparison study of compartment fire simulation with steady laminar flamelet and eddy dissipation model [Volume 53, Issue 5, 2021, Pages 2953-2966]
  • EFFICIENCY Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Ejector Design and evaluation of a novel bi-evaporator combined power and refrigeration cycle working with various zeotropic mixtures [Volume 53, Issue 5, 2021, Pages 3003-3022]
  • Elastic boundary Investigating the Fluid-Solid Interaction in Incompressible Flow and The Effect of Oscillation Amplitude on Heat Transfer [Volume 53, Issue 9, 2021, Pages 4747-4772]
  • Elastic fracture mechanics Experimental and Theoretical Assessment of Mode II Fracture Toughness for Cracked Ductile Specimens with High Strain-Hardening [Volume 53, Issue 10, 2021, Pages 5141-5158]
  • Elastic-plastic properties Theoretical Analysis of Equal Channel Angular Pressing Process by Upper Bound Method and Its Experimental Investigation in Condition of Circular Cross-Section Channel [Volume 53, Issue 8, 2021, Pages 4729-4744]
  • Elastohydrodynamic Transient numerical modeling and experimental investigation of the effect of surface texture on elastohydrodynamic lubrication [Volume 53, Issue 5 (Special Issue), 2021, Pages 3201-3212]
  • Elastomeric composite Comparison of penetration process of 2-layer elastomeric composite with thermoset composite using energy absorption equations [Volume 53, Issue 6, 2021, Pages 3657-3672]
  • Elastoplastic behavior Numerical Simulation of Elastoplastic Behavior and Damage Evolution at Various Stress Triaxiality [Volume 53, Issue 12, 2021, Pages 5703-5724]
  • Electrical conduction pump Experimental Study of the Effects of Fluid Physical Properties and Working Temperature on Heat Transfer in Conduction Pump [Volume 53, Issue 3, 2021, Pages 1607-1620]
  • Electrical efficiency Theoretical comparison of thermal and electrical performance of different models of sheet and tube type solar photovoltaic - thermal water collector [Volume 53, Issue 5, 2021, Pages 2903-2920]
  • Electrical tomography Reconstruction of Electrical Tomography Images based on Parameter Estimation Method in Inverse Heat Transfer [Volume 53, Issue 1 (Special Issue), 2021, Pages 483-498]
  • Electric Arc Furnace Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat [Volume 53, Issue 9, 2021, Pages 4999-5016]
  • Electrohydrodynamic Experimental Study of the Effects of Fluid Physical Properties and Working Temperature on Heat Transfer in Conduction Pump [Volume 53, Issue 3, 2021, Pages 1607-1620]
  • Electroplastic friction stir spot welding Electroplastic friction stir spot welding for joining AA6061-T6 aluminum to galvanized DP590 steel [Volume 53, Issue 6, 2021, Pages 3733-3750]
  • Electrowetting on Dielectric Numerical Study of the Dynamics of Non-Newtonian Carreau Droplets under Electrowetting Phenomenon [Volume 53, Issue 1 (Special Issue), 2021, Pages 319-338]
  • Embryo Designing Optimum Multi-Domain System by Integrating Bond Graph and Genetic Programming [Volume 53, Issue 2, 2021, Pages 1015-1038]
  • Empirical Mode Decomposition Denoising vibration signals of rotating machines using probability density function, similarity measure and improved thresholding function [Volume 53, Issue 4 (Special Issue), 2021, Pages 2493-2512]
  • Endogenous exergy destruction Advanced exergy and thermoeconomic analysis of the supercritical carbon dioxide recompression cycle: A comparative study [Volume 53, Issue 5, 2021, Pages 2967-2982]
  • End-to-end control A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Endurance Limit Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2021, Pages 5627-5644]
  • Energy Investigation of using hybrid nanofluid-phase change material spectral splitter in photovoltaic/thermal system [Volume 53, Issue 7, 2021, Pages 4429-4454]
  • Energy Absorption A new method for estimating the compressive strain of cellular structures using microstructure of foams based on Laguerre tessellations [Volume 53, Issue 6, 2021, Pages 3629-3644]
  • Energy demand Investigation of vehicle energy demand considering the modified tire power loss [Volume 53, Issue 6, 2021, Pages 3615-3628]
  • Energy Efficiency Thermal performance evaluation of a greenhouse solar dryer equipped with photovoltaic cells and phase change material [Volume 53, Issue 5 (Special Issue), 2021, Pages 3367-3384]
  • Energy harvester Finite Element Modeling of a Novel Magnetic Shape Memory Alloy Based Energy Harvester Using a Corrugated Beam and Investigating the Effective Parameters [Volume 53, Issue 2, 2021, Pages 799-814]
  • Energy harvesting Experimental and numerical study of energy harvesting from sloshing of a liquid and its performance on shaper machine [Volume 53, Issue 6 (Special Issue), 2021, Pages 3911-3924]
  • Energy harvesting Piezoelectric Energy Harvesting Using a Porous Beam Under Fluid-Induced Vibrations [Volume 53, Issue 8, 2021, Pages 4633-4648]
  • Energy method Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2021, Pages 5851-5866]
  • Energy production system Techno-Economic Feasibility of Energy Supply Systems from Renewable Sources of Solar and Biomass in Rural Areas Located In Cold and Dry Climate [Volume 53, Issue 1, 2021, Pages 81-100]
  • Engine emissions Investigation on Effects of Water Addition on Performance and Emissions of an n-heptane Fueled Homogeneous Charge Compression Ignition Engine [Volume 53, Issue 3, 2021, Pages 1637-1652]
  • Ensemble forecasting Diagnostical and observational analysis of clear air turbulence over the middle east and Iran [Volume 53, Issue 7, 2021, Pages 4203-4220]
  • Environmental fluid dynamic Modeling of turbulent atmospheric boundary layer and dispersion of solid pollutant particles in an urban area using large eddy simulation [Volume 53, Issue 5, 2021, Pages 2839-2856]
  • Equal channel angular pressing Theoretical Analysis of Equal Channel Angular Pressing Process by Upper Bound Method and Its Experimental Investigation in Condition of Circular Cross-Section Channel [Volume 53, Issue 8, 2021, Pages 4729-4744]
  • Equations of state Study of cavitation inception using multiphase lattice Boltzmann method with incorporating equations of state [Volume 53, Issue 5 (Special Issue), 2021, Pages 3151-3170]
  • Eulerian-Lagrangian Numerical investigation of ethanol and acetone spray injection into gaseous environment [Volume 53, Issue 5 (Special Issue), 2021, Pages 3213-3226]
  • Euler-Lagrange Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Exact difference method Study of cavitation inception using multiphase lattice Boltzmann method with incorporating equations of state [Volume 53, Issue 5 (Special Issue), 2021, Pages 3151-3170]
  • Exact Solution Analytical Solution of Heat Transfer in a Cone Made of Functionally Graded Material [Volume 53, Issue 1 (Special Issue), 2021, Pages 539-552]
  • Exergo-economic Thermo-Economic Evaluation of a Power and Freshwater Production System Including a Liquid Metal Magnetohydrodynamic Unit Driven By a Concentrated Solar Tower and Biogas [Volume 53, Issue 11, 2021, Pages 5551-5572]
  • Exergy Investigation of using hybrid nanofluid-phase change material spectral splitter in photovoltaic/thermal system [Volume 53, Issue 7, 2021, Pages 4429-4454]
  • Exergy Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat [Volume 53, Issue 9, 2021, Pages 4999-5016]
  • Exergy destruction Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Exogenous exergy destruction Advanced exergy and thermoeconomic analysis of the supercritical carbon dioxide recompression cycle: A comparative study [Volume 53, Issue 5, 2021, Pages 2967-2982]
  • Exoskeleton Active fault tolerant control based on adaptive back-stepping nonsingular fast integral terminal sliding mode approach [Volume 53, Issue 6 (Special Issue), 2021, Pages 3763-3782]
  • Exoskeleton Robust and Adaptive Control of an Exoskeleton Robot For Tracking Modified Desired Trajectory Based on Zero Moment Point Stability Theory [Volume 53, Issue 12, 2021, Pages 5831-5850]
  • Experimental aerodynamics Numerical/Experimental Investigation of the Presence of a Protuberance in a Convergent – Divergent Nozzle in Supersonic Regime to Control the Thrust Vector [Volume 53, Issue 9, 2021, Pages 4887-4904]
  • Experimental evaluation Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Experimental investigation Experimental investigation of heat transfer and pressure drop in perforated ribs in the solar air heater channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1981-2000]
  • Experimental Method Experimental Investigation on the Thermal Resistance of Straight Heat Pipes with Double-Ended Cooling and Middle-Heating at Different Tilt Angles [Volume 53, Issue 1, 2021, Pages 279-302]
  • Experimental Method Investigation on the effect of addition of nano-titanium oxide particles to phase change material in a hybrid system for battery cooling under constant heat flux [Volume 53, Issue 7, 2021, Pages 4379-4396]
  • Experimental study Experimental Investigation of the Effects of Inlet Cooling Air Temperature on the Occupants’ Local Thermal Sensation in the Under-Floor Air Distribution System [Volume 53, Issue 3, 2021, Pages 1537-1548]
  • Experimental study Experimental Study of Surfactant Type Effects on the Foam Stability and Mobility With the Approach of Enhancing Oil Recovery [Volume 53, Issue 1 (Special Issue), 2021, Pages 339-356]
  • Experimental study Effect of intense impulsive loading on performance of multi-layered plates [Volume 53, Issue 4 (Special Issue), 2021, Pages 2639-2670]
  • Experimental study Effect of adding carbon nanotubes into the matrix material on the buckling behavior of glass/epoxy composite plates: An experimental study [Volume 53, Issue 4 (Special Issue), 2021, Pages 2613-2628]
  • Experimental study Experimental investigation of personalized ventilation effects on temperature, velocity, and draught discomfort distribution in an office [Volume 53, Issue 7, 2021, Pages 4397-4410]
  • Experimental study Measurement of subcooled flow boiling heat transfer coefficient in vertical annulus tube [Volume 53, Issue 7, 2021, Pages 4345-4360]
  • Experimental study Experimental Investigation of a High Aspect Ratio Rectangular Liquid Jet in Parallel Airflow [Volume 53, Issue 11, 2021, Pages 5429-5444]
  • Experimental system Experimental Study of Injecting Water Vapor and Oil Compounds by Nebulizer on the Efficiency and Natural Gas Flame Pollution [Volume 53, Issue 1, 2021, Pages 31-40]
  • Experimental test Experimental study on the enhancement of the thermal efficiency of a household gas water heater [Volume 53, Issue 3 (Special Issue), 2021, Pages 2013-2030]
  • Experimental test A new optimal structural boundary modification algorithm in the multi-objective topology optimization of microgripper [Volume 53, Issue 4, 2021, Pages 2261-2270]
  • Experimental Verification Experimental verification of indirect bridge mode shape identification using transmissibility of a passing vehicle [Volume 53, Issue 6, 2021, Pages 3529-2548]
  • External cooling Experimental and Numerical Investigation of Film Cooling Effectiveness on Squealer Tip of a Turbine Blade [Volume 53, Issue 3, 2021, Pages 1521-1536]
  • External disturbance Attitude Stabilization of Quadrotor Using Adaptive Fuzzy Proportional Integral Derivative Controller [Volume 53, Issue 2 (Special Issue), 2021, Pages 1081-1094]
  • External reformer Thermodynamic Analysis of Power Generation System Based on Solid Oxide Fuel Cell With External Reforming [Volume 53, Issue 1 (Special Issue), 2021, Pages 605-622]

F

  • Failure mode Electroplastic friction stir spot welding for joining AA6061-T6 aluminum to galvanized DP590 steel [Volume 53, Issue 6, 2021, Pages 3733-3750]
  • Failure modes and effects analysis An Improved Failure Modes and Effects Analysis as a New Framework to perform the Function Analysis Phase of products in the Value Engineering [Volume 53, Issue 8, 2021, Pages 4665-4690]
  • Falling Film Simulation of Two-Phase Flow and Heat Transfer in a Channel and around a Tube by Lattice-Boltzmann Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 499-516]
  • Faraday’s induction law Experimental and numerical study of energy harvesting from sloshing of a liquid and its performance on shaper machine [Volume 53, Issue 6 (Special Issue), 2021, Pages 3911-3924]
  • Fast Fluid Dynamics Accurate and faster than real-time simulation of indoor airflow by using fast fluid dynamics [Volume 53, Issue 3 (Special Issue), 2021, Pages 1839-1860]
  • Fatigue Fatigue crack growth analysis via Wiener degradation model with random effects [Volume 53, Issue 4, 2021, Pages 2271-2286]
  • Fault detection Fault detection and isolation based on robust Kalman filter for discrete-time systems with stochastic and norm-bounded uncertainties [Volume 53, Issue 6 (Special Issue), 2021, Pages 3825-3840]
  • Fault isolation Fault detection and isolation based on robust Kalman filter for discrete-time systems with stochastic and norm-bounded uncertainties [Volume 53, Issue 6 (Special Issue), 2021, Pages 3825-3840]
  • Fault tolerant control Active Fault Tolerant Control of Wind Turbine Systems using Disturbance Observer-based Sliding Mode and Time Delay Estimation [Volume 53, Issue 8, 2021, Pages 4517-4534]
  • Fault tolerant control Active fault tolerant control based on adaptive back-stepping nonsingular fast integral terminal sliding mode approach [Volume 53, Issue 6 (Special Issue), 2021, Pages 3763-3782]
  • Feed Experimental investigation of the infeed method and machining parameters on the tool wear during thread milling [Volume 53, Issue 2 (Special Issue), 2021, Pages 1345-1356]
  • Feed spacers Investigate of Hydrodynamic and Mass Transfer in the Spacer-Filled Channel of Reverse Osmosis Module [Volume 53, Issue 1 (Special Issue), 2021, Pages 393-410]
  • Femur fracture Prediction of femoral fracture pattern using finite element analysis of dual-energy X-ray absorptiometry -based model [Volume 53, Issue 2 (Special Issue), 2021, Pages 1223-1236]
  • Ferrofluid Convection Heat transfer Fe3O4/Water in a Square microchannel Under Uniform Heat Flux and Magnetic Field [Volume 53, Issue 9, 2021, Pages 4925-4942]
  • Fiber-metal laminates Lateral Stability Analysis of Thin-Walled Fiber-Metal Laminate Beam with Varying Cross-Section by Considering Nonlinear Strains [Volume 53, Issue 10, 2021, Pages 5239-5268]
  • Fictitious Material Concept Experimental and Theoretical Assessment of Mode II Fracture Toughness for Cracked Ductile Specimens with High Strain-Hardening [Volume 53, Issue 10, 2021, Pages 5141-5158]
  • Film-cooling effectiveness Experimental and Numerical Investigation of Film Cooling Effectiveness on Squealer Tip of a Turbine Blade [Volume 53, Issue 3, 2021, Pages 1521-1536]
  • Filter Real Time Solution for Inverse Heat Conduction Problem in One-Dimensional Plate Utilizing Fuzzy- Proportional–Integral–Derivative Controller [Volume 53, Issue 1, 2021, Pages 303-316]
  • Fingertips Planar Object Manipulation with Multi Fingers Robot Located on a Moving Hand Under Rolling Grasp Constrains [Volume 53, Issue 2, 2021, Pages 943-958]
  • Finite element analysis Prediction of femoral fracture pattern using finite element analysis of dual-energy X-ray absorptiometry -based model [Volume 53, Issue 2 (Special Issue), 2021, Pages 1223-1236]
  • Finite element analysis Experimental and Numerical Investigation of Fatigue Behavior of Polylactic acid Components Made by Additive Manufacturing Method [Volume 53, Issue 6, 2021, Pages 3703-3716]
  • Finite element analysis Study and Optimization of Effective Parameters in The Occurrence of Blush Defect in The Plastic Injection Molding Process by Analysis of Variance [Volume 53, Issue 10, 2021, Pages 5293-5308]
  • Finite element simulation Numerical and Experimental Modal Analysis of a 400 W Polymer Electrolyte Membrane Fuel Cell [Volume 53, Issue 1, 2021, Pages 101-116]
  • Finite Volume Solution of the Isotropic Heat Equation Using the Finite Volume Monte Carlo Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 467-482]
  • Finlet Experimental Investigation of the Performance of Trailing Edge Noise-Reducing Finlets [Volume 53, Issue 9, 2021, Pages 4827-4846]
  • Fire Numerical simulation simultaneous use of longitudinal ventilation and smoke extraction from the ceiling in fires inside tunnels [Volume 53, Issue 7, 2021, Pages 4411-4428]
  • Fire Investigating the Effects of Loung Chair Fire in a Cinema Hall Using Displacement, Impingement Jet and Stratum Ventilation Systems [Volume 53, Issue 11, 2021, Pages 5573-5594]
  • Firewall algorithm Analytical Study on Effect of Loosening on Nonlinear Vibration Behavior of Bolted Joints [Volume 53, Issue 12, 2021, Pages 5739-5754]
  • First-Order Electrical Potential theory 2-Dimensional Electroelastic Analysis of Piezoelectric Cylinders Using First-Order Shear Deformation and First-Order Electric Potential Theories [Volume 53, Issue 2, 2021, Pages 815-832]
  • First order reliability method Reliability analysis of rectangular plate under in-plane tensile loading using continuum damage mechanics theory [Volume 53, Issue 6, 2021, Pages 3645-3656]
  • Fixed points Stability and bifurcation of a rotating blade with varying speed [Volume 53, Issue 4 (Special Issue), 2021, Pages 2459-2472]
  • Fixture stiffness An Experimental Approach for Determination of Locators Reaction Forces in Milling Fixtures [Volume 53, Issue 12, 2021, Pages 5615-5626]
  • Flamelet generated manifold combustion model Numerical investigation of compartment fire under maximum and minimum of natural ventilation using flamelet generated manifold combustion model [Volume 53, Issue 5 (Special Issue), 2021, Pages 3335-3350]
  • Flank wear Experimental investigation of the infeed method and machining parameters on the tool wear during thread milling [Volume 53, Issue 2 (Special Issue), 2021, Pages 1345-1356]
  • Flapping Flight Altitude cascade control of an avian-like flapping robot considering articulated wings and quasi-steady [Volume 53, Issue 4, 2021, Pages 2137-2154]
  • Flapping wing Modeling and linearization of longitudinal dynamics for a flapping wing micro aerial vehicle dragonfly-like with active rigid tail [Volume 53, Issue 6, 2021, Pages 3445-3464]
  • Flapping wing Experimental investigation of the effect of flapping on the lift and thrust forces of 3D-wing [Volume 53, Issue 3 (Special Issue), 2021, Pages 1697-1708]
  • Flat Flame Burner Experimental Investigation of Combustion Species Radiation to Evaluate Equivalence Ratio in a Surface Flame Burner [Volume 53, Issue 1, 2021, Pages 41-52]
  • Flat Heat Pipe Numerical Investigation of Hybrid Wick Structure Effect on Thermal Performance of a Thin Flat Heat Pipe [Volume 53, Issue 11, 2021, Pages 5485-5504]
  • Flavin Mononucleotide Analyzing the effect of adsorption of Flavin Mononucleotide biomolecule on the natural frequency of biocompatible boron-nitride nanotubes [Volume 53, Issue 4 (Special Issue), 2021, Pages 2577-2588]
  • Flexible Fabrication and characterization of a flexible nanogenerator using reverse electrowetting concept [Volume 53, Issue 5, 2021, Pages 3023-3034]
  • Flexible functional core Analysis of dynamic instability in sandwich thick beams with flexible functional core subjected to a follower force [Volume 53, Issue 2, 2021, Pages 863-880]
  • Flexible wall Numerical Study of Natural Convection Heat Transfer inside a Triangular Cavity with Flexible Sidewalls Containing a Cylindrical Heat Source [Volume 53, Issue 11, 2021, Pages 5461-5484]
  • Flexural-torsional buckling Free vibration and flexural-torsional stability analyses of axially functionally graded tapered thin-walled beam resting on elastic foundation [Volume 53, Issue 6, 2021, Pages 3587-3614]
  • Flight control Time-delay compensation for networked hardware-in-the-loop simulation of a flight control system using polynomial prediction [Volume 53, Issue 2 (Special Issue), 2021, Pages 1111-1124]
  • Flight Levels Diagnostical and observational analysis of clear air turbulence over the middle east and Iran [Volume 53, Issue 7, 2021, Pages 4203-4220]
  • Flow Control Effect of blowing on flow-induced noise reduction in a rod-airfoil [Volume 53, Issue 3 (Special Issue), 2021, Pages 1783-1798]
  • Flow pattern Experimental investigation of personalized ventilation effects on temperature, velocity, and draught discomfort distribution in an office [Volume 53, Issue 7, 2021, Pages 4397-4410]
  • Flow-through configuration Simulation of Effective Parameters on Desalination Water Using Capacitive Deionization Method [Volume 53, Issue 11, 2021, Pages 5595-5612]
  • Fluid flow Semi-Analytical Study of Fluid-Induced Nonlinear Vibrations in Viscoelastic Beams with Standard Linear Solid Model Using Multiple Time Scales Method [Volume 53, Issue 10, 2021, Pages 5105-5122]
  • Fluid flow simulation Accurate and faster than real-time simulation of indoor airflow by using fast fluid dynamics [Volume 53, Issue 3 (Special Issue), 2021, Pages 1839-1860]
  • Fluid induced vibrations Piezoelectric Energy Harvesting Using a Porous Beam Under Fluid-Induced Vibrations [Volume 53, Issue 8, 2021, Pages 4633-4648]
  • Fluid properties Numerical investigation of the effect of thermophysical properties of nanofluid on fluid flow and heat transfer in a tube in presence of magnetic field [Volume 53, Issue 7, 2021, Pages 4329-4344]
  • Fluid-solid Investigating the Fluid-Solid Interaction in Incompressible Flow and The Effect of Oscillation Amplitude on Heat Transfer [Volume 53, Issue 9, 2021, Pages 4747-4772]
  • Fluid-Structure Interaction Numerical Simulation of Liner Vibrations in a Laboratory Combustion Chamber [Volume 53, Issue 2, 2021, Pages 881-896]
  • Fluid-Structure Interaction Numerical analysis of mechanical micropump using membrane-based check-valves for microfluidic applications [Volume 53, Issue 5 (Special Issue), 2021, Pages 3171-3186]
  • Fluid-Structure Interaction Response analysis of primary cilia of the cell to the oscillatory fluid flow by using fluid-structure interaction method [Volume 53, Issue 5 (Special Issue), 2021, Pages 3293-3306]
  • Fluid-Structure Interaction Numerical Study of Natural Convection Heat Transfer inside a Triangular Cavity with Flexible Sidewalls Containing a Cylindrical Heat Source [Volume 53, Issue 11, 2021, Pages 5461-5484]
  • Fluid-Structure Interaction Fluid-Structure Interactions Analysis of Tension in An Axon Using Finite Elements Modeling to Investigate Strain Related Neurological Damages [Volume 53, Issue 8, 2021, Pages 4609-4632]
  • Flutter Flutter reliability analysis of laminated composite plates [Volume 53, Issue 6 (Special Issue), 2021, Pages 3925-3938]
  • Flutter Modeling and Flutter Analysis of a Three Dimensional Box-Wing using Wagner Unsteady Aerodynamic Model [Volume 53, Issue 12, 2021, Pages 5809-5830]
  • Foam Modeling of Drilling Cuttings Transport by Foam in Horizontal Well Condition Using Computational Fluid Dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 357-374]
  • Foam stability Experimental Study of Surfactant Type Effects on the Foam Stability and Mobility With the Approach of Enhancing Oil Recovery [Volume 53, Issue 1 (Special Issue), 2021, Pages 339-356]
  • Folded plates Free vibration analysis of functionally graded carbon nanotubes reinforced composite skew folded plates using the isogeometric approach [Volume 53, Issue 4, 2021, Pages 2239-2260]
  • Forced vibrations Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Forming limit diagrams Analysis of Forming Limit of Sheet Metals Considering Vertex Localized Necking and Ductile Damage Criterion [Volume 53, Issue 2 (Special Issue), 2021, Pages 1307-1320]
  • Forming load Theoretical Analysis of Equal Channel Angular Pressing Process by Upper Bound Method and Its Experimental Investigation in Condition of Circular Cross-Section Channel [Volume 53, Issue 8, 2021, Pages 4729-4744]
  • Four degree of freedom parallel robot Kinematic and dynamic performance evaluation of a four degrees of freedom parallel robot [Volume 53, Issue 4, 2021, Pages 2055-2072]
  • Fourier spectral element Modeling of vibro-acoustic modulation induced by non-linear contact in the Euler-Bernoulli beam using the Fourier spectral element [Volume 53, Issue 6 (Special Issue), 2021, Pages 3809-3824]
  • Fractal Analysis Quantifying of viscous fingering instability in porous media [Volume 53, Issue 5, 2021, Pages 2887-2902]
  • Fracture behavior Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]
  • Fracture mechanics The Prediction of Femoral Fracture Location Using Extended Finite Element Method [Volume 53, Issue 8, 2021, Pages 4595-4608]
  • Fracture strain Numerical Simulation of Elastoplastic Behavior and Damage Evolution at Various Stress Triaxiality [Volume 53, Issue 12, 2021, Pages 5703-5724]
  • Fracture Toughness Experimental and Theoretical Assessment of Mode II Fracture Toughness for Cracked Ductile Specimens with High Strain-Hardening [Volume 53, Issue 10, 2021, Pages 5141-5158]
  • Free Vibrations Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Free wind velocity Investigation of the effect of free-wind velocity on the performance of small-scale vertical axis wind turbine [Volume 53, Issue 3 (Special Issue), 2021, Pages 1709-1728]
  • Friction Transient numerical modeling and experimental investigation of the effect of surface texture on elastohydrodynamic lubrication [Volume 53, Issue 5 (Special Issue), 2021, Pages 3201-3212]
  • Frictional entropy Numerical Simulation of Magnetic Field Effect on Thermal and Thermo-Hydraulic Performance and Entropy Generation of a Silicon Microchannel Heat Sink Under Uniform Heat Flux [Volume 53, Issue 1 (Special Issue), 2021, Pages 517-538]
  • Friction factor An Experimental Investigation on the Convective Heat Transfer Coefficient and Nusselt Number in Water/Carbon Nanofluid [Volume 53, Issue 1, 2021, Pages 209-220]
  • Friction Stir Welding Statistical analysis and optimization of tensile strength of Al7075 butt joint produced by friction stir welding and submerged friction stir welding via response surface methodology and desirability approach [Volume 53, Issue 4 (Special Issue), 2021, Pages 2719-2734]
  • Friction Stir Welding Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy [Volume 53, Issue 6, 2021, Pages 3751-3760]
  • Fuel Cell Experimental Investigation of Water Level Control System of Liquid-Gas Separator in the Fuel Cell [Volume 53, Issue 1 (Special Issue), 2021, Pages 589-604]
  • Fuel Cell Experimental and numerical investigation of the plastic deformation of metallic bipolar plates with serpentine flow filed [Volume 53, Issue 6, 2021, Pages 3717-3732]
  • Functionally graded material Analytical modeling of elastic limit angular velocity in a rotating disk of a functionally graded material under mechanical-thermal loading conditions [Volume 53, Issue 4 (Special Issue), 2021, Pages 2589-2612]
  • Functionally graded materials Analytical Solution of Heat Transfer in a Cone Made of Functionally Graded Material [Volume 53, Issue 1 (Special Issue), 2021, Pages 539-552]
  • Functionally graded materials Transient Analysis and Free Vibration of Functionally Graded Truncated Conical Shells Subjected to Moving Pressure [Volume 53, Issue 2, 2021, Pages 897-912]
  • Functionally graded materials Free vibration and flexural-torsional stability analyses of axially functionally graded tapered thin-walled beam resting on elastic foundation [Volume 53, Issue 6, 2021, Pages 3587-3614]
  • Functionally graded materials Nonlinear Vibrations of Graphene Reinforced Pipes Conveying Fluid [Volume 53, Issue 8, 2021, Pages 4483-4500]
  • Function analysis An Improved Failure Modes and Effects Analysis as a New Framework to perform the Function Analysis Phase of products in the Value Engineering [Volume 53, Issue 8, 2021, Pages 4665-4690]
  • Fused deposition modeling Experimental and Numerical Investigation of Fatigue Behavior of Polylactic acid Components Made by Additive Manufacturing Method [Volume 53, Issue 6, 2021, Pages 3703-3716]
  • Fuzzy- proportional–integral–derivative controller Real Time Solution for Inverse Heat Conduction Problem in One-Dimensional Plate Utilizing Fuzzy- Proportional–Integral–Derivative Controller [Volume 53, Issue 1, 2021, Pages 303-316]

G

  • Gain scheduling Unstable Aircraft Flight Control Based on Linear Matrix Inequality with Consideration of Control and Saturation Constraints [Volume 53, Issue 2, 2021, Pages 979-992]
  • Galerkin projection method Stability analysis of shear-thinning flow in narrow gap Taylor–Couette axial flow [Volume 53, Issue 3 (Special Issue), 2021, Pages 1745-1766]
  • Gamma process Fatigue crack growth analysis via Wiener degradation model with random effects [Volume 53, Issue 4, 2021, Pages 2271-2286]
  • Gas detonation forming method Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • Gas diffusion flame Numerical Investigation of the Influence of Burner’s Bluff Body on Air-Fuel Mixing and Reaction [Volume 53, Issue 9, 2021, Pages 4981-4998]
  • Gas diffusion layer Investigation of the Humidifier Performance of Adding Gas Diffusion Layers Around Membrane for Fuel Cell Application [Volume 53, Issue 3, 2021, Pages 1653-1666]
  • Gas diffusion layer Network Modeling to Investigate the Effect of Coupling the Transport Phenomena on Water Distribution in Gas Diffusion Layer [Volume 53, Issue 11, 2021, Pages 5505-5528]
  • Gaseous crossflow Rectangular liquid jets injected transversely into subsonic crossflow [Volume 53, Issue 5 (Special Issue), 2021, Pages 3117-3134]
  • Gasification Energy Analysis and Exergy of the System of Simultaneous Production of Power and Hydrogen with the Excitatory Gasification of Municipal Solid Waste [Volume 53, Issue 11, 2021, Pages 5529-5550]
  • Gasoline-natural sas Investigation of the response of a multi-zone simulation code equipped with blow-by sub-model in a dual fuel spark-ignition engine [Volume 53, Issue 5, 2021, Pages 3035-3056]
  • Gas-solid fluidized bed Performance Evaluation of a Fluidized Bed Reactor by Studying the Hydrodynamics and Thermal Properties of Different Solid Particles [Volume 53, Issue 3, 2021, Pages 1573-1590]
  • Gas turbine The Feasibility Study of a Night Sky Radiative Cooling System for Cooling the Intake Air of a Gas Turbine [Volume 53, Issue 1, 2021, Pages 155-172]
  • Gas turbine Energy Analysis and Exergy of the System of Simultaneous Production of Power and Hydrogen with the Excitatory Gasification of Municipal Solid Waste [Volume 53, Issue 11, 2021, Pages 5529-5550]
  • Genetic Programming Designing Optimum Multi-Domain System by Integrating Bond Graph and Genetic Programming [Volume 53, Issue 2, 2021, Pages 1015-1038]
  • Geometric dependent properties Investigation of the mechanical properties of multilayer graphene helicoids with different geometric characteristics using molecular dynamics simulation [Volume 53, Issue 2 (Special Issue), 2021, Pages 1237-1250]
  • Geothermal Heat pump Comparison of axial and radial soil temperature distribution in U-tube and coaxial borehole heat exchangers [Volume 53, Issue 7, 2021, Pages 4361-4378]
  • Gibbs-Appell methodology Modeling and trajectory tracking control of non-holonomic mobile robot with revolute-prismatic joints [Volume 53, Issue 2 (Special Issue), 2021, Pages 1041-1064]
  • Glass/Epoxy fibers Effect of adding carbon nanotubes into the matrix material on the buckling behavior of glass/epoxy composite plates: An experimental study [Volume 53, Issue 4 (Special Issue), 2021, Pages 2613-2628]
  • Global Sensitivity Analysis Global sensitivity analysis of nanomachining parameters by using dynamic scanning thermal microscope [Volume 53, Issue 4, 2021, Pages 2367-2384]
  • Global Sensitivity Analysis Sensitivity Analysis of Rotor Dynamic Behavior to Manufacturing Tolerances Based on Global Sensitivity Analysis and Statistical Methods [Volume 53, Issue 8, 2021, Pages 4501-4516]
  • Gradient parameter Investigation of the effect of longitudinal grading of material on vibrations of axially moving systems [Volume 53, Issue 2 (Special Issue), 2021, Pages 1197-1210]
  • Grain size Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy [Volume 53, Issue 6, 2021, Pages 3751-3760]
  • Graphene oxide A Study on the Ballistic Behavior of Kevlar Fabric Impregnated with Shear Thickening Fluid Containing Graphene Oxide Additive [Volume 53, Issue 12, 2021, Pages 5725-5738]
  • Graphene platelets Nonlinear Vibrations of Graphene Reinforced Pipes Conveying Fluid [Volume 53, Issue 8, 2021, Pages 4483-4500]
  • Graphene sheets aggregation Effect of Graphene Sheets Aggregation on The Dislocation-Blocking Mechanism of Nanolaminated Aluminum/Graphene Composite: Molecular Dynamics Simulation Study [Volume 53, Issue 8, 2021, Pages 4649-4664]
  • Graphical user interface Path Design and Control of a Moving Social Robot in an Environment with Moving Obstacles in Order to Reach a Moving Target through Fuzzy Control [Volume 53, Issue 2, 2021, Pages 993-1014]
  • Graphics processing unit Developing an alternating direction explicit-implicit domain-decomposition approach to solve heat transfer equation on graphics processing unit [Volume 53, Issue 3 (Special Issue), 2021, Pages 1915-1936]
  • Greenhouse solar dryer Thermal performance evaluation of a greenhouse solar dryer equipped with photovoltaic cells and phase change material [Volume 53, Issue 5 (Special Issue), 2021, Pages 3367-3384]
  • Greville points Accurate Calculation of Nodal Vectors in Isogeometric Analysis of Shell Structures Using Greville Points [Volume 53, Issue 10, 2021, Pages 5185-5202]
  • Grinding Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2021, Pages 5627-5644]
  • Ground Source Heat Exchanger Dynamic Simulation of Desiccant Cooling System with Simultaneously Using Solar and Ground Renewable Energies in Hot-Humid Regions [Volume 53, Issue 3, 2021, Pages 1549-1572]
  • Ground source heat pump Comparison of long-term performance and the initial cost of the horizontal ground source heat pump with the air source heat pump in hot regions [Volume 53, Issue 5 (Special Issue), 2021, Pages 3317-3334]
  • GTD450 steel Experimental Study of Effects of Hydrogen Embrittlement and Residual Stress on Mechanical Properties of GTD450 [Volume 53, Issue 12, 2021, Pages 5659-5678]
  • Guidance law Impact Time Guidance Law against Maneuvering Targets Using Sliding Mode Control [Volume 53, Issue 2, 2021, Pages 913-922]
  • Guillotine Fracture Investigation of Thermo-Hydraulic Parameters of Reactor Containment due to Cold-Leg Break Accident [Volume 53, Issue 3, 2021, Pages 1591-1606]
  • Gurney-Flap Optimization of The Slotted Gurney-Flap Geometry Applied to NACA 0012 Airfoil for Aerodynamic Performance Improvement [Volume 53, Issue 11, 2021, Pages 5331-5348]
  • Gurson-Tvergaard-Needleman model Micromechanical Damage Model for Plasticity of ‎Metals to Predict Failure under Shear Loads [Volume 53, Issue 12, 2021, Pages 5679-5702]

H

  • Hardware in loop Attitude Stabilization of Quadrotor Using Adaptive Fuzzy Proportional Integral Derivative Controller [Volume 53, Issue 2 (Special Issue), 2021, Pages 1081-1094]
  • Hardware-in-the-loop Time-delay compensation for networked hardware-in-the-loop simulation of a flight control system using polynomial prediction [Volume 53, Issue 2 (Special Issue), 2021, Pages 1111-1124]
  • Head injury criteria Numerical Investigation of the Effect of Shell Material and Thickness on the Mechanics of Motorcycle Helmets Impact [Volume 53, Issue 2, 2021, Pages 687-708]
  • Heat assisted machining Experimental study of machining residual stresses in plasma-assisted turning process [Volume 53, Issue 4, 2021, Pages 2385-2406]
  • Heat Flux Real Time Solution for Inverse Heat Conduction Problem in One-Dimensional Plate Utilizing Fuzzy- Proportional–Integral–Derivative Controller [Volume 53, Issue 1, 2021, Pages 303-316]
  • Heat transfer enhancement Numerical simulation of heat transfer and pressure drop of pseudo-plastic fluid in a pipe heat exchanger equipped with a modified twisted tape [Volume 53, Issue 5, 2021, Pages 3077-3098]
  • Heavy gas engine Investigation to set the type of pre-chamber fuel system in heavy gas engine HIMSEN 35/40 [Volume 53, Issue 5, 2021, Pages 2935-2952]
  • Heavy Metals Removal of Lead Heavy Metal from Wastewater by Crystallization Process and Investigation of the Effective Parameters [Volume 53, Issue 11, 2021, Pages 5349-5366]
  • Hemodialysis Temporal analysis of the fistula at three anastomosis angles of 45, 90, and 135 degrees [Volume 53, Issue 3 (Special Issue), 2021, Pages 1799-1814]
  • Heterogeneous traffic flow Control of heterogeneous traffic flows in presence of pocket loss, time-varying communication delay and actuator lag [Volume 53, Issue 4, 2021, Pages 2155-2170]
  • Higher-order boundary conditions Investigating the Influence of Higher-Order Boundary Conditions on Free Vibrations of Bi-Directional Functionally Graded Thick Conical Micro-Shells [Volume 53, Issue 10, 2021, Pages 5085-5104]
  • High heat flux Numerical Investigation of Hybrid Wick Structure Effect on Thermal Performance of a Thin Flat Heat Pipe [Volume 53, Issue 11, 2021, Pages 5485-5504]
  • High order sliding mode observer Fast initial alignment for inertial navigation system based on high order sliding mode observer and Kalman filter [Volume 53, Issue 6, 2021, Pages 3571-3586]
  • High-order theory Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Hole The effect of hole on the rectangular vortex generator on thermal-hydrodynamic performance of the minichannel [Volume 53, Issue 7, 2021, Pages 4293-4308]
  • Hole position Hydrothermal performance of trapezoidal fin equipped with vortex generator and hole: Investigation of the effect of vortex generator and hole position [Volume 53, Issue 3 (Special Issue), 2021, Pages 1963-1980]
  • Holmboe instability Numerical simulation of Holmboe waves in intrusive gravity current using LES method [Volume 53, Issue 7, 2021, Pages 4261-4278]
  • Homogeneous combustion Investigation on Effects of Water Addition on Performance and Emissions of an n-heptane Fueled Homogeneous Charge Compression Ignition Engine [Volume 53, Issue 3, 2021, Pages 1637-1652]
  • Homotopy analysis method Nonlinear Vibrations of Graphene Reinforced Pipes Conveying Fluid [Volume 53, Issue 8, 2021, Pages 4483-4500]
  • Homotopy Perturbation Method Analytical modeling of elastic limit angular velocity in a rotating disk of a functionally graded material under mechanical-thermal loading conditions [Volume 53, Issue 4 (Special Issue), 2021, Pages 2589-2612]
  • Hopfield oscillator Robust and Adaptive Control of an Exoskeleton Robot For Tracking Modified Desired Trajectory Based on Zero Moment Point Stability Theory [Volume 53, Issue 12, 2021, Pages 5831-5850]
  • Horizontal axis turbines Development of Blade Element Momentum Theory for Unsteady Flow with Regard to the Dynamic Stall Phenomenon [Volume 53, Issue 3, 2021, Pages 1439-1456]
  • Horizontal Tube Simulation of Two-Phase Flow and Heat Transfer in a Channel and around a Tube by Lattice-Boltzmann Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 499-516]
  • Horizontal Well Modeling of Drilling Cuttings Transport by Foam in Horizontal Well Condition Using Computational Fluid Dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 357-374]
  • Hot-wire anemometer Experimental Investigation on Flow Downstream of a Triangular Bluff Body at Different Angles [Volume 53, Issue 1 (Special Issue), 2021, Pages 427-436]
  • Household gas water heater Experimental study on the enhancement of the thermal efficiency of a household gas water heater [Volume 53, Issue 3 (Special Issue), 2021, Pages 2013-2030]
  • Hover Modeling and linearization of longitudinal dynamics for a flapping wing micro aerial vehicle dragonfly-like with active rigid tail [Volume 53, Issue 6, 2021, Pages 3445-3464]
  • Human-in-the-loop system A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Humidification-dehumidification Thermo-Economic Evaluation of a Power and Freshwater Production System Including a Liquid Metal Magnetohydrodynamic Unit Driven By a Concentrated Solar Tower and Biogas [Volume 53, Issue 11, 2021, Pages 5551-5572]
  • Hybrid wick Numerical Investigation of Hybrid Wick Structure Effect on Thermal Performance of a Thin Flat Heat Pipe [Volume 53, Issue 11, 2021, Pages 5485-5504]
  • Hydrodynamics Investigate of Hydrodynamic and Mass Transfer in the Spacer-Filled Channel of Reverse Osmosis Module [Volume 53, Issue 1 (Special Issue), 2021, Pages 393-410]
  • Hydrogen Thermodynamic Analysis of Power Generation System Based on Solid Oxide Fuel Cell With External Reforming [Volume 53, Issue 1 (Special Issue), 2021, Pages 605-622]
  • Hydrogen Investigation of hydrogen production process by partial oxidation of natural gas in a large non-catalytic reformer and comparison with methane steam reforming process in a small catalytic reformer [Volume 53, Issue 5 (Special Issue), 2021, Pages 3275-3292]
  • Hydrogen embrittlement Experimental Study of Effects of Hydrogen Embrittlement and Residual Stress on Mechanical Properties of GTD450 [Volume 53, Issue 12, 2021, Pages 5659-5678]
  • Hydrogen injection One-dimensional Combustion Simulation for Different Hydrogen-enriched Natural Gas Blends [Volume 53, Issue 1, 2021, Pages 53-64]
  • Hydrogen Production Numerical Investigation of the Performance of Hydrogen Production Process by Production Gas Recirculation [Volume 53, Issue 1 (Special Issue), 2021, Pages 623-638]
  • Hydrogen Production Energy Analysis and Exergy of the System of Simultaneous Production of Power and Hydrogen with the Excitatory Gasification of Municipal Solid Waste [Volume 53, Issue 11, 2021, Pages 5529-5550]
  • Hydrostatic transmission Assessing short-term storage effects on hydrostatic wind turbine in presence of turbulent wind [Volume 53, Issue 6, 2021, Pages 3431-3444]
  • Hydrothermal Vertical growth of titanium dioxide nanorods on nebulizer fluorine doped tin oxide deposited on silicon microarrays [Volume 53, Issue 6 (Special Issue), 2021, Pages 4051-4062]
  • Hyperelastic plates Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method [Volume 53, Issue 4, 2021, Pages 2331-2346]

I

  • Ice crystallization Performance investigation of freezing desalination coupled with carbon dioxide refrigeration system [Volume 53, Issue 5 (Special Issue), 2021, Pages 3351-3366]
  • Ice fraction Performance investigation of freezing desalination coupled with carbon dioxide refrigeration system [Volume 53, Issue 5 (Special Issue), 2021, Pages 3351-3366]
  • Image reconstruction Reconstruction of Electrical Tomography Images based on Parameter Estimation Method in Inverse Heat Transfer [Volume 53, Issue 1 (Special Issue), 2021, Pages 483-498]
  • Impact test Numerical Investigation of the Effect of Shell Material and Thickness on the Mechanics of Motorcycle Helmets Impact [Volume 53, Issue 2, 2021, Pages 687-708]
  • Imperfection Study of the Analytical Solutions and Modelling of Nonlinear Buckling in Bellows [Volume 53, Issue 2, 2021, Pages 729-744]
  • Impinging jet Study of the Flow and Heat Transfer of Pulsed Sinusoidal Impinging Jet at Distances Close To the Concave Surface [Volume 53, Issue 9, 2021, Pages 4943-4960]
  • Improved Thresholding Function Denoising vibration signals of rotating machines using probability density function, similarity measure and improved thresholding function [Volume 53, Issue 4 (Special Issue), 2021, Pages 2493-2512]
  • Impulsive loading Effect of intense impulsive loading on performance of multi-layered plates [Volume 53, Issue 4 (Special Issue), 2021, Pages 2639-2670]
  • Incompressible flow Investigating the Fluid-Solid Interaction in Incompressible Flow and The Effect of Oscillation Amplitude on Heat Transfer [Volume 53, Issue 9, 2021, Pages 4747-4772]
  • Indirect freeze desalination Performance investigation of freezing desalination coupled with carbon dioxide refrigeration system [Volume 53, Issue 5 (Special Issue), 2021, Pages 3351-3366]
  • Indirect identification Experimental verification of indirect bridge mode shape identification using transmissibility of a passing vehicle [Volume 53, Issue 6, 2021, Pages 3529-2548]
  • Individual three-node model؛ thermal comfort Effect of Gender and Body Fitness on the Thermal Sensation of Sleeping Occupants Under Task-Ambient Air Conditioning System [Volume 53, Issue 1 (Special Issue), 2021, Pages 453-466]
  • Indoor air quality Effect of Air Curtain on Occupants Thermal Comfort and Indoor Air Quality in an Athletic Swimming Pool with Spectators’ Stand [Volume 53, Issue 1, 2021, Pages 191-208]
  • Inertial Navigation Fast initial alignment for inertial navigation system based on high order sliding mode observer and Kalman filter [Volume 53, Issue 6, 2021, Pages 3571-3586]
  • Infeed methods in thread cutting Experimental investigation of the infeed method and machining parameters on the tool wear during thread milling [Volume 53, Issue 2 (Special Issue), 2021, Pages 1345-1356]
  • Initial alignment Fast initial alignment for inertial navigation system based on high order sliding mode observer and Kalman filter [Volume 53, Issue 6, 2021, Pages 3571-3586]
  • Injection timing Effect of Start of Injection Timing on Waste Heat Recovery Capacity in a Reactivity Controlled Compression Ignition Engine [Volume 53, Issue 1, 2021, Pages 3-16]
  • Inlet distortion Effects of air injection at rotor blade row tip region of an axial compressor on its performance under inlet distortion conditions [Volume 53, Issue 3 (Special Issue), 2021, Pages 1729-1744]
  • In-plane vibration On the deviation from cyclic symmetry in a spinning ring under moving electromagnetic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 3891-3910]
  • Instability Analysis of Density Wave Oscillations in a Boiling Channel by a New Analytical Model [Volume 53, Issue 3, 2021, Pages 1505-1520]
  • Instability Investigation of the effect of longitudinal grading of material on vibrations of axially moving systems [Volume 53, Issue 2 (Special Issue), 2021, Pages 1197-1210]
  • Instability Modeling and parametric analysis of two-phase fluid stability in boiling process in a thermal channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1861-1882]
  • Instability Quantifying of viscous fingering instability in porous media [Volume 53, Issue 5, 2021, Pages 2887-2902]
  • Instantaneous cross section Numerical Analysis of Cross Section Time Variation Effects of the Supersonic Exhaust Diffuser [Volume 53, Issue 3, 2021, Pages 1469-1486]
  • Integral state control Nonlinear optimal control of an active transfemoral prosthesis using state dependent Riccati equation approach [Volume 53, Issue 4, 2021, Pages 2117-2136]
  • Intense dynamic loading Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 4023-4050]
  • Interdigitated electrodes Variable distance interdigitated electrodes design to improve the performance of cantilever piezoelectric thin films nanogenerators [Volume 53, Issue 4, 2021, Pages 2347-2366]
  • Internal Resonance Nonlinear Electro-aero-elastic Vibration Analysis of a Nanocomposite Laminated Trapezoidal Actuator [Volume 53, Issue 2 (Special Issue), 2021, Pages 1137-1158]
  • Internal stability Control of heterogeneous traffic flows in presence of pocket loss, time-varying communication delay and actuator lag [Volume 53, Issue 4, 2021, Pages 2155-2170]
  • Intrusive gravity current Numerical simulation of Holmboe waves in intrusive gravity current using LES method [Volume 53, Issue 7, 2021, Pages 4261-4278]
  • Inverse Heat Transfer Reconstruction of Electrical Tomography Images based on Parameter Estimation Method in Inverse Heat Transfer [Volume 53, Issue 1 (Special Issue), 2021, Pages 483-498]
  • Inverse problem Real Time Solution for Inverse Heat Conduction Problem in One-Dimensional Plate Utilizing Fuzzy- Proportional–Integral–Derivative Controller [Volume 53, Issue 1, 2021, Pages 303-316]
  • Ion exchange membrane Simulation of Effective Parameters on Desalination Water Using Capacitive Deionization Method [Volume 53, Issue 11, 2021, Pages 5595-5612]
  • Ion mobility difference Experimental Study of the Effects of Fluid Physical Properties and Working Temperature on Heat Transfer in Conduction Pump [Volume 53, Issue 3, 2021, Pages 1607-1620]
  • Iran Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Isogeometric analysis Free vibration analysis of functionally graded carbon nanotubes reinforced composite skew folded plates using the isogeometric approach [Volume 53, Issue 4, 2021, Pages 2239-2260]
  • Isogeometric analysis Accurate Calculation of Nodal Vectors in Isogeometric Analysis of Shell Structures Using Greville Points [Volume 53, Issue 10, 2021, Pages 5185-5202]

J

  • Joining Electroplastic friction stir spot welding for joining AA6061-T6 aluminum to galvanized DP590 steel [Volume 53, Issue 6, 2021, Pages 3733-3750]
  • Journal bearing Fault Detection of journal bearings and Simulation of Major Occurred Fault using Failure Mode and Effect Analysis Method to Evaluate its Effects [Volume 53, Issue 8, 2021, Pages 4581-4594]

K

  • Kalina Thermodynamic analysis and comparison of two new tri-generation (hydrogen, power, heating) systems using geothermal energy [Volume 53, Issue 5, 2021, Pages 2983-3002]
  • Kalman Filter Fast initial alignment for inertial navigation system based on high order sliding mode observer and Kalman filter [Volume 53, Issue 6, 2021, Pages 3571-3586]
  • Kalman Filter Stability Analysis of Predictive Control in Networked Control System Using Switching Control [Volume 53, Issue 10, 2021, Pages 5039-5054]
  • Kane’s method Modeling and linearization of longitudinal dynamics for a flapping wing micro aerial vehicle dragonfly-like with active rigid tail [Volume 53, Issue 6, 2021, Pages 3445-3464]
  • Kantorovich method Approximate Torsional Analysis of Arbitrary Trapezoidal Bars by Kantorovich Method [Volume 53, Issue 10, 2021, Pages 5203-5220]
  • Karush-Kuhn-Tucker Theory Actuators redundancy resolution scheme with computational time reduction purpose for parallel cable robots with considering the rupture limits of the cables [Volume 53, Issue 6, 2021, Pages 3479-3496]
  • Kevlar A Study on the Ballistic Behavior of Kevlar Fabric Impregnated with Shear Thickening Fluid Containing Graphene Oxide Additive [Volume 53, Issue 12, 2021, Pages 5725-5738]
  • Kinematic Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Kinematics Kinematic and dynamic performance evaluation of a four degrees of freedom parallel robot [Volume 53, Issue 4, 2021, Pages 2055-2072]
  • K-means algorithm Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]

L

  • Laguerre method A new method for estimating the compressive strain of cellular structures using microstructure of foams based on Laguerre tessellations [Volume 53, Issue 6, 2021, Pages 3629-3644]
  • Laminar flow Convection Heat transfer Fe3O4/Water in a Square microchannel Under Uniform Heat Flux and Magnetic Field [Volume 53, Issue 9, 2021, Pages 4925-4942]
  • Laminated composite plates Flutter reliability analysis of laminated composite plates [Volume 53, Issue 6 (Special Issue), 2021, Pages 3925-3938]
  • Laminated composites Experimental and theoretical investigation of the critical load of U-notched laminated composite specimens under in-plane shear loading [Volume 53, Issue 6, 2021, Pages 3673-3688]
  • Land-based gas turbines One-dimensional Combustion Simulation for Different Hydrogen-enriched Natural Gas Blends [Volume 53, Issue 1, 2021, Pages 53-64]
  • Landing Modeling of the pilot's depth perception algorithm to avoid collisions with obstacles for commercial aircraft landing [Volume 53, Issue 6, 2021, Pages 3497-3510]
  • Landing Modified Variable Structure Estimation and Control for Constrained Landing on Mars [Volume 53, Issue 10, 2021, Pages 5055-5068]
  • Laplace transform Fractional calculus approach for bending of viscoelastic plate using two-variable refined plate theory [Volume 53, Issue 4, 2021, Pages 2287-2308]
  • Large Eddy Simulation Investigation of the Effect of Ventilation System Inlet Location on Particle Motion in a Room Using Multi Relaxation Time-Lattice Boltzmann Method [Volume 53, Issue 3, 2021, Pages 1457-1468]
  • Large Eddy Simulation Comparison study of compartment fire simulation with steady laminar flamelet and eddy dissipation model [Volume 53, Issue 5, 2021, Pages 2953-2966]
  • Large Eddy Simulation Numerical investigation of compartment fire under maximum and minimum of natural ventilation using flamelet generated manifold combustion model [Volume 53, Issue 5 (Special Issue), 2021, Pages 3335-3350]
  • Large Eddy Simulation Modeling of turbulent atmospheric boundary layer and dispersion of solid pollutant particles in an urban area using large eddy simulation [Volume 53, Issue 5, 2021, Pages 2839-2856]
  • Large Eddy Simulation Wind simulation in a complex terrain by numerical weather prediction method using large eddy simulation [Volume 53, Issue 7, 2021, Pages 4221-4240]
  • Large Eddy Simulation Investigating the Effects of Loung Chair Fire in a Cinema Hall Using Displacement, Impingement Jet and Stratum Ventilation Systems [Volume 53, Issue 11, 2021, Pages 5573-5594]
  • Laser Transient numerical modeling and experimental investigation of the effect of surface texture on elastohydrodynamic lubrication [Volume 53, Issue 5 (Special Issue), 2021, Pages 3201-3212]
  • Laser cladding Laser Cladding of TiC/316LSS and Analysis of Input Parameters using Response Surface Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1269-1286]
  • Laser shearing interferometry Non-destructive evaluation of internal cracks in glass fiber-reinforced polymers using digital shearing interferometry [Volume 53, Issue 6 (Special Issue), 2021, Pages 4063-4078]
  • Lateral-Torsional Buckling Lateral Stability Analysis of Thin-Walled Fiber-Metal Laminate Beam with Varying Cross-Section by Considering Nonlinear Strains [Volume 53, Issue 10, 2021, Pages 5239-5268]
  • Lattice Boltzmann Simulation of Two-Phase Flow and Heat Transfer in a Channel and around a Tube by Lattice-Boltzmann Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 499-516]
  • Lattice Boltzmann method Investigation of the Effect of Ventilation System Inlet Location on Particle Motion in a Room Using Multi Relaxation Time-Lattice Boltzmann Method [Volume 53, Issue 3, 2021, Pages 1457-1468]
  • Lattice Boltzmann method Studying of droplet impingement on hydrophilic and hydrophobic curved surfaces by lattice Boltzmann method based on Allen-Cahn equation [Volume 53, Issue 5, 2021, Pages 2869-2886]
  • Layerwise theory Transient Analysis and Free Vibration of Functionally Graded Truncated Conical Shells Subjected to Moving Pressure [Volume 53, Issue 2, 2021, Pages 897-912]
  • L/D and H/D Ratio Investigation of Geometric Characteristics on the Non-Reaction Supersonic Flow inside the Channel with the Presence of Cavities [Volume 53, Issue 11, 2021, Pages 5409-5428]
  • Left anterior descending artery Numerical study of the effect of left coronary artery stenosis on vascular tissue oxygenation [Volume 53, Issue 3 (Special Issue), 2021, Pages 1767-1782]
  • Left coronary artery stenosis Numerical study of the effect of left coronary artery stenosis on vascular tissue oxygenation [Volume 53, Issue 3 (Special Issue), 2021, Pages 1767-1782]
  • Level set Method Numerical simulation of droplet formation in a T-shape microchannel using two-phase level-set method [Volume 53, Issue 3 (Special Issue), 2021, Pages 1815-1838]
  • Levenberg–Marquardt algorithm Reconstruction of Electrical Tomography Images based on Parameter Estimation Method in Inverse Heat Transfer [Volume 53, Issue 1 (Special Issue), 2021, Pages 483-498]
  • Lewis number Analytical model for the non-premixed combustion of the titanium dust cloud in counter-flow geometry [Volume 53, Issue 5 (Special Issue), 2021, Pages 3307-3316]
  • Limit angular velocity Analytical modeling of elastic limit angular velocity in a rotating disk of a functionally graded material under mechanical-thermal loading conditions [Volume 53, Issue 4 (Special Issue), 2021, Pages 2589-2612]
  • Limited data Age-Based Clustering Prognostics of Gas Turbines and Evaluation of the Proposed Method Robustness in Data Deficient Conditions [Volume 53, Issue 2, 2021, Pages 777-798]
  • Linear matrix inequality Unstable Aircraft Flight Control Based on Linear Matrix Inequality with Consideration of Control and Saturation Constraints [Volume 53, Issue 2, 2021, Pages 979-992]
  • Linear matrix inequality Control of the Amount of Oncolytic Virus Injection by Considering Time Delay [Volume 53, Issue 2 (Special Issue), 2021, Pages 1125-1136]
  • Linear vibrations Investigation of Quality Factor for Linear Vibrations of Rectangular Micro-plates with Thermoelastic Damping [Volume 53, Issue 2, 2021, Pages 851-862]
  • Linear viscoelasticity Fractional calculus approach for bending of viscoelastic plate using two-variable refined plate theory [Volume 53, Issue 4, 2021, Pages 2287-2308]
  • Liquefied Natural Gas Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Liquid metal magneto-hydrodynamic Thermo-Economic Evaluation of a Power and Freshwater Production System Including a Liquid Metal Magnetohydrodynamic Unit Driven By a Concentrated Solar Tower and Biogas [Volume 53, Issue 11, 2021, Pages 5551-5572]
  • Lithium-ion batteries Investigation on the effect of addition of nano-titanium oxide particles to phase change material in a hybrid system for battery cooling under constant heat flux [Volume 53, Issue 7, 2021, Pages 4379-4396]
  • Load Capacity Fault Detection of journal bearings and Simulation of Major Occurred Fault using Failure Mode and Effect Analysis Method to Evaluate its Effects [Volume 53, Issue 8, 2021, Pages 4581-4594]
  • Lob on Disc Design, Fabrication and Experimental Study of Spiral Microchannel Particle Separator on Centrifugal Microfluidic Platforms [Volume 53, Issue 3, 2021, Pages 1359-1372]
  • Localized load Effect of intense impulsive loading on performance of multi-layered plates [Volume 53, Issue 4 (Special Issue), 2021, Pages 2639-2670]
  • Local sensation Effect of Air Curtain on Occupants Thermal Comfort and Indoor Air Quality in an Athletic Swimming Pool with Spectators’ Stand [Volume 53, Issue 1, 2021, Pages 191-208]
  • Local thermal sensation Experimental Investigation of the Effects of Inlet Cooling Air Temperature on the Occupants’ Local Thermal Sensation in the Under-Floor Air Distribution System [Volume 53, Issue 3, 2021, Pages 1537-1548]
  • Locating System An Experimental Approach for Determination of Locators Reaction Forces in Milling Fixtures [Volume 53, Issue 12, 2021, Pages 5615-5626]
  • Locator reaction Forces An Experimental Approach for Determination of Locators Reaction Forces in Milling Fixtures [Volume 53, Issue 12, 2021, Pages 5615-5626]
  • Lock-in region Piezoelectric Energy Harvesting Using a Porous Beam Under Fluid-Induced Vibrations [Volume 53, Issue 8, 2021, Pages 4633-4648]
  • Low Reynolds numbers Experimental investigation of the effect of flapping on the lift and thrust forces of 3D-wing [Volume 53, Issue 3 (Special Issue), 2021, Pages 1697-1708]
  • Low Temperature Combustion Investigation of Performance and Emission Characteristic of a Reactivity Controlled Compression Ignition Engine Fueled By a Mixture of Diesel and Syngas Derived From Biomass Gasification [Volume 53, Issue 1, 2021, Pages 17-30]
  • LS-DYNA Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Lubrication Transient numerical modeling and experimental investigation of the effect of surface texture on elastohydrodynamic lubrication [Volume 53, Issue 5 (Special Issue), 2021, Pages 3201-3212]

M

  • Machining forces Mechanistic modeling of cutting forces in milling process by end milling with cutting edges with adjustment angle of 45 degree [Volume 53, Issue 4 (Special Issue), 2021, Pages 2703-2718]
  • Magnetic entropy Numerical Simulation of Magnetic Field Effect on Thermal and Thermo-Hydraulic Performance and Entropy Generation of a Silicon Microchannel Heat Sink Under Uniform Heat Flux [Volume 53, Issue 1 (Special Issue), 2021, Pages 517-538]
  • Magnetic Shape Memory Alloys Finite Element Modeling of a Novel Magnetic Shape Memory Alloy Based Energy Harvester Using a Corrugated Beam and Investigating the Effective Parameters [Volume 53, Issue 2, 2021, Pages 799-814]
  • Magnetohydrodynamic Numerical analysis of flow and natural convection heat transfer in a circular enclosure heated from bottom utilizing porous layer [Volume 53, Issue 3 (Special Issue), 2021, Pages 1937-1962]
  • Magnetohydrodynamic micropump Design and Multi-Objective Optimization of A Magnetohydrodynamic Drug Delivery Infusion Micropump [Volume 53, Issue 10, 2021, Pages 5221-5238]
  • Magnetohydrodynamics Numerical study and investigation of the effect of magnetic field on fluid hydrodynamic behavior [Volume 53, Issue 5, 2021, Pages 2857-2868]
  • Magneto-Rheological Damper Manufacturing and Testing of an Optimized Magneto-Rheological Fluid and Modelling of a Twin Tube Magneto-Rheological Damper Using a Modified Non-Newtonian Model Using Analytical Quasi-Static, Analytical Unsteady, Numerical and Experimental Methods [Volume 53, Issue 3, 2021, Pages 1373-1400]
  • Magneto-rheological fluid Manufacturing and Testing of an Optimized Magneto-Rheological Fluid and Modelling of a Twin Tube Magneto-Rheological Damper Using a Modified Non-Newtonian Model Using Analytical Quasi-Static, Analytical Unsteady, Numerical and Experimental Methods [Volume 53, Issue 3, 2021, Pages 1373-1400]
  • Main combustion chamber. Nozzle. Fuel system Investigation to set the type of pre-chamber fuel system in heavy gas engine HIMSEN 35/40 [Volume 53, Issue 5, 2021, Pages 2935-2952]
  • Maneuvering target Impact Time Guidance Law against Maneuvering Targets Using Sliding Mode Control [Volume 53, Issue 2, 2021, Pages 913-922]
  • Marine diesel engine Design and evaluation of a novel bi-evaporator combined power and refrigeration cycle working with various zeotropic mixtures [Volume 53, Issue 5, 2021, Pages 3003-3022]
  • Mass Transfer Investigate of Hydrodynamic and Mass Transfer in the Spacer-Filled Channel of Reverse Osmosis Module [Volume 53, Issue 1 (Special Issue), 2021, Pages 393-410]
  • Material extrusion Evaluating the effects of material extrusion 3D printing process parameters on shape-shifting of Poly-lactic acid 4D-printed structures [Volume 53, Issue 6 (Special Issue), 2021, Pages 4095-4110]
  • Maximum amplitude of vibrations Parametric investigation of the size-dependent axially graded Rayleigh beams subjected to a moving load on Pasternak substrate [Volume 53, Issue 4, 2021, Pages 2171-2192]
  • MCF-7 breast cancer Experimental Extraction of Young's Modulus of MCF-7 Breast Cancer Cell Using Spherical Contact Models [Volume 53, Issue 12, 2021, Pages 5769-5784]
  • Mechanical Properties Investigation of the mechanical properties of multilayer graphene helicoids with different geometric characteristics using molecular dynamics simulation [Volume 53, Issue 2 (Special Issue), 2021, Pages 1237-1250]
  • Mechanical Properties A study on the synergistic influence of reduced graphene oxide and MWCNTs on the mechanical properties of epoxy nanocomposite [Volume 53, Issue 6 (Special Issue), 2021, Pages 3971-3986]
  • Mechanical Properties An experimental investigation of the effect of the type of nanostructured reinforcements on the mechanical and tribological properties of epoxy based nanocomposites [Volume 53, Issue 6 (Special Issue), 2021, Pages 4009-4022]
  • Mechanical Properties Investigation on Mechanical Properties of Polyoxymethylene Reinforced by Carbon Nanotube Using Molecular Dynamics [Volume 53, Issue 8, 2021, Pages 4691-4700]
  • Mechanical Properties Experimental Study of Effects of Hydrogen Embrittlement and Residual Stress on Mechanical Properties of GTD450 [Volume 53, Issue 12, 2021, Pages 5659-5678]
  • Mechanical vibration of blade Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2021, Pages 5851-5866]
  • Mechanotransduction Response analysis of primary cilia of the cell to the oscillatory fluid flow by using fluid-structure interaction method [Volume 53, Issue 5 (Special Issue), 2021, Pages 3293-3306]
  • Membrane humidifier Investigation of the Humidifier Performance of Adding Gas Diffusion Layers Around Membrane for Fuel Cell Application [Volume 53, Issue 3, 2021, Pages 1653-1666]
  • MEMS Investigation of Quality Factor for Linear Vibrations of Rectangular Micro-plates with Thermoelastic Damping [Volume 53, Issue 2, 2021, Pages 851-862]
  • Meshless Method Nonlinear Transient Heat Transfer Analysis Using Two Integration Methods with Different Distributions of Integration Points in the Domain in a Meshless Formulation [Volume 53, Issue 1 (Special Issue), 2021, Pages 553-572]
  • Meshless Method Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method [Volume 53, Issue 4, 2021, Pages 2331-2346]
  • Metallic bipolar plate Experimental and numerical investigation of the plastic deformation of metallic bipolar plates with serpentine flow filed [Volume 53, Issue 6, 2021, Pages 3717-3732]
  • Micro Aerial Vehicle A Fast Warehouse Inventory Micro Aerial Vehicle System Equipped with Visual Guidance and Navigation Algorithm [Volume 53, Issue 12, 2021, Pages 5785-5808]
  • Micro aerial vehicle Dragonfly-like Modeling and linearization of longitudinal dynamics for a flapping wing micro aerial vehicle dragonfly-like with active rigid tail [Volume 53, Issue 6, 2021, Pages 3445-3464]
  • Micro air vehicle Experimental investigation of the effect of flapping on the lift and thrust forces of 3D-wing [Volume 53, Issue 3 (Special Issue), 2021, Pages 1697-1708]
  • Microcantilever Increasing the Sensitivity of SiO2/Al Micro Cantilever Infrared Detector Based on Micro Electromechanical Systems Technology by Optimizing of Dimensions [Volume 53, Issue 8, 2021, Pages 4717-4728]
  • Microchannel Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Microchannel Control of droplet size in a two-phase microchannel using PID controller: A novel experimental study [Volume 53, Issue 7, 2021, Pages 4279-4292]
  • Microcombustor Study of the effective parameters on the performance of a micro thermophotovoltaic system with micro porous combustion chamber [Volume 53, Issue 5, 2021, Pages 2921-2934]
  • Micro-droplet Control of droplet size in a two-phase microchannel using PID controller: A novel experimental study [Volume 53, Issue 7, 2021, Pages 4279-4292]
  • Microelectromechanical resonator Design and simulation of a biosensor based on a microelectromechanical resonator array [Volume 53, Issue 6 (Special Issue), 2021, Pages 3841-3854]
  • Microfluidic Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Microfluidic Design, Fabrication and Experimental Study of Spiral Microchannel Particle Separator on Centrifugal Microfluidic Platforms [Volume 53, Issue 3, 2021, Pages 1359-1372]
  • Microfluidic Effect of Magnetic Field on Motion, Deformation, and Separation Time of Newtonian and Non-Newtonian Droplets in a Flow‐Focusing Microchannel [Volume 53, Issue 11, 2021, Pages 5311-5330]
  • Microfluidics Numerical analysis of mechanical micropump using membrane-based check-valves for microfluidic applications [Volume 53, Issue 5 (Special Issue), 2021, Pages 3171-3186]
  • Microfluidics Fluid-Structure Interactions Analysis of Tension in An Axon Using Finite Elements Modeling to Investigate Strain Related Neurological Damages [Volume 53, Issue 8, 2021, Pages 4609-4632]
  • Microfluidic technology Numerical simulation of droplet formation in a T-shape microchannel using two-phase level-set method [Volume 53, Issue 3 (Special Issue), 2021, Pages 1815-1838]
  • Micromechanical modeling Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Micropump Numerical analysis of mechanical micropump using membrane-based check-valves for microfluidic applications [Volume 53, Issue 5 (Special Issue), 2021, Pages 3171-3186]
  • Microvalve Numerical analysis of mechanical micropump using membrane-based check-valves for microfluidic applications [Volume 53, Issue 5 (Special Issue), 2021, Pages 3171-3186]
  • Micro wind turbines Experimental study on effective parameters on vertical axis wind turbine performance [Volume 53, Issue 5, 2021, Pages 2771-2790]
  • Middle heating Experimental Investigation on the Thermal Resistance of Straight Heat Pipes with Double-Ended Cooling and Middle-Heating at Different Tilt Angles [Volume 53, Issue 1, 2021, Pages 279-302]
  • Milling Mechanistic modeling of cutting forces in milling process by end milling with cutting edges with adjustment angle of 45 degree [Volume 53, Issue 4 (Special Issue), 2021, Pages 2703-2718]
  • Milling Fixtures An Experimental Approach for Determination of Locators Reaction Forces in Milling Fixtures [Volume 53, Issue 12, 2021, Pages 5615-5626]
  • Minichannel The effect of hole on the rectangular vortex generator on thermal-hydrodynamic performance of the minichannel [Volume 53, Issue 7, 2021, Pages 4293-4308]
  • Mixed longitudinal and lateral stability Control of Vehicle’s Mixed Longitudinal and Lateral Stability with Engine Dynamics Using Super Twisting Control Algorithm [Volume 53, Issue 2, 2021, Pages 959-978]
  • Mobile Manipulator Double Hyperbolic Sliding Mode Control Based on Unscented Kalman Filter for Three-legged Mobile manipulator [Volume 53, Issue 4, 2021, Pages 2105-2116]
  • Mode II loading Experimental and Theoretical Assessment of Mode II Fracture Toughness for Cracked Ductile Specimens with High Strain-Hardening [Volume 53, Issue 10, 2021, Pages 5141-5158]
  • Model base control Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Modeling Investigation of penetration behavior of monolithic and multi-layered metallic targets subjected to a projectile impact [Volume 53, Issue 4, 2021, Pages 2309-2330]
  • Modeling CO2 adsorption Modeling the calcium looping process with an emphasis on the bed hydrodynamics and sorbent characteristics [Volume 53, Issue 5, 2021, Pages 2807-2820]
  • Modelling Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • Model of the pilot Modeling of the pilot's depth perception algorithm to avoid collisions with obstacles for commercial aircraft landing [Volume 53, Issue 6, 2021, Pages 3497-3510]
  • Model updating method Analytical Study on Effect of Loosening on Nonlinear Vibration Behavior of Bolted Joints [Volume 53, Issue 12, 2021, Pages 5739-5754]
  • Mode splitting On the deviation from cyclic symmetry in a spinning ring under moving electromagnetic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 3891-3910]
  • Modified Couple Stress Theory The effect of accuracy of the length scale parameter on natural frequencies of porous rectangular microplate [Volume 53, Issue 2 (Special Issue), 2021, Pages 1179-1196]
  • Modified Couple Stress Theory Investigating the Influence of Higher-Order Boundary Conditions on Free Vibrations of Bi-Directional Functionally Graded Thick Conical Micro-Shells [Volume 53, Issue 10, 2021, Pages 5085-5104]
  • Modified power-law Numerical simulation of heat transfer and pressure drop of pseudo-plastic fluid in a pipe heat exchanger equipped with a modified twisted tape [Volume 53, Issue 5, 2021, Pages 3077-3098]
  • Modified Twisted Tape Numerical simulation of heat transfer and pressure drop of pseudo-plastic fluid in a pipe heat exchanger equipped with a modified twisted tape [Volume 53, Issue 5, 2021, Pages 3077-3098]
  • Modified Watson’s Theory Experimental Study of the Effect of Fluid Jet Swirl on Circular Hydraulic Jump [Volume 53, Issue 7, 2021, Pages 4153-4170]
  • Molecular dynamics Investigation of Crack Growth in Deposited and Perfect Titanium/Titanium Nitride Structure by Molecular Dynamic Simulation [Volume 53, Issue 2, 2021, Pages 833-850]
  • Molecular dynamics Investigation on Mechanical Properties of Polyoxymethylene Reinforced by Carbon Nanotube Using Molecular Dynamics [Volume 53, Issue 8, 2021, Pages 4691-4700]
  • Molecular dynamics Effect of Graphene Sheets Aggregation on The Dislocation-Blocking Mechanism of Nanolaminated Aluminum/Graphene Composite: Molecular Dynamics Simulation Study [Volume 53, Issue 8, 2021, Pages 4649-4664]
  • Molecular Dynamic Simulation Investigation of the mechanical properties of multilayer graphene helicoids with different geometric characteristics using molecular dynamics simulation [Volume 53, Issue 2 (Special Issue), 2021, Pages 1237-1250]
  • Molecular dynamics simulations Analyzing the effect of adsorption of Flavin Mononucleotide biomolecule on the natural frequency of biocompatible boron-nitride nanotubes [Volume 53, Issue 4 (Special Issue), 2021, Pages 2577-2588]
  • Momentum coefficient Investigation of the effect of free-wind velocity on the performance of small-scale vertical axis wind turbine [Volume 53, Issue 3 (Special Issue), 2021, Pages 1709-1728]
  • Monte Carlo Solution of the Isotropic Heat Equation Using the Finite Volume Monte Carlo Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 467-482]
  • Monte Carlo Sensitivity Analysis of Rotor Dynamic Behavior to Manufacturing Tolerances Based on Global Sensitivity Analysis and Statistical Methods [Volume 53, Issue 8, 2021, Pages 4501-4516]
  • Monte-Carlo Simulation Flutter reliability analysis of laminated composite plates [Volume 53, Issue 6 (Special Issue), 2021, Pages 3925-3938]
  • Moore’s theory A Theory for Predicting Stall Cell Transient Behavior [Volume 53, Issue 9, 2021, Pages 4773-4788]
  • Motorcycle helmet Numerical Investigation of the Effect of Shell Material and Thickness on the Mechanics of Motorcycle Helmets Impact [Volume 53, Issue 2, 2021, Pages 687-708]
  • Moving beam Investigation of the effect of longitudinal grading of material on vibrations of axially moving systems [Volume 53, Issue 2 (Special Issue), 2021, Pages 1197-1210]
  • Moving electromagnetic loading On the deviation from cyclic symmetry in a spinning ring under moving electromagnetic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 3891-3910]
  • Moving internal pressure Free and Forced Vibration Analysis of Stiffened Cylindrical Shells under Moving Internal Pressure [Volume 53, Issue 12, 2021, Pages 5867-5886]
  • Moving load Parametric investigation of the size-dependent axially graded Rayleigh beams subjected to a moving load on Pasternak substrate [Volume 53, Issue 4, 2021, Pages 2171-2192]
  • Moving pressure Transient Analysis and Free Vibration of Functionally Graded Truncated Conical Shells Subjected to Moving Pressure [Volume 53, Issue 2, 2021, Pages 897-912]
  • Moving robot Path Design and Control of a Moving Social Robot in an Environment with Moving Obstacles in Order to Reach a Moving Target through Fuzzy Control [Volume 53, Issue 2, 2021, Pages 993-1014]
  • Multilayer coating Investigation of Crack Growth in Deposited and Perfect Titanium/Titanium Nitride Structure by Molecular Dynamic Simulation [Volume 53, Issue 2, 2021, Pages 833-850]
  • Multi-layered plates Investigation of penetration behavior of monolithic and multi-layered metallic targets subjected to a projectile impact [Volume 53, Issue 4, 2021, Pages 2309-2330]
  • Multilayer Graphene Helicoid Investigation of the mechanical properties of multilayer graphene helicoids with different geometric characteristics using molecular dynamics simulation [Volume 53, Issue 2 (Special Issue), 2021, Pages 1237-1250]
  • Multi-objective Designing Optimum Multi-Domain System by Integrating Bond Graph and Genetic Programming [Volume 53, Issue 2, 2021, Pages 1015-1038]
  • Multi-objective optimization Design and Multi-Objective Optimization of A Magnetohydrodynamic Drug Delivery Infusion Micropump [Volume 53, Issue 10, 2021, Pages 5221-5238]
  • Multiphase Flow Numerical investigation of ethanol and acetone spray injection into gaseous environment [Volume 53, Issue 5 (Special Issue), 2021, Pages 3213-3226]
  • Multiphase flows Studying of droplet impingement on hydrophilic and hydrophobic curved surfaces by lattice Boltzmann method based on Allen-Cahn equation [Volume 53, Issue 5, 2021, Pages 2869-2886]
  • Multiphase lattice Boltzmann method Study of cavitation inception using multiphase lattice Boltzmann method with incorporating equations of state [Volume 53, Issue 5 (Special Issue), 2021, Pages 3151-3170]
  • Multiple Impedance Control Planar Object Manipulation with Multi Fingers Robot Located on a Moving Hand Under Rolling Grasp Constrains [Volume 53, Issue 2, 2021, Pages 943-958]
  • Multiple scales method Nonlinear Electro-aero-elastic Vibration Analysis of a Nanocomposite Laminated Trapezoidal Actuator [Volume 53, Issue 2 (Special Issue), 2021, Pages 1137-1158]
  • Multiple scales method Superharmonic and Subharmonic Resonance Analysis of A Rectangular Hyperelastic Membrane Resting on Nonlinear Elastic Foundation Using The Method of Multiple Scales [Volume 53, Issue 8, 2021, Pages 4535-4564]
  • Multiple time scales Semi-Analytical Study of Fluid-Induced Nonlinear Vibrations in Viscoelastic Beams with Standard Linear Solid Model Using Multiple Time Scales Method [Volume 53, Issue 10, 2021, Pages 5105-5122]
  • Multi relaxation time Investigation of the Effect of Ventilation System Inlet Location on Particle Motion in a Room Using Multi Relaxation Time-Lattice Boltzmann Method [Volume 53, Issue 3, 2021, Pages 1457-1468]
  • Multiscale finite volume method Multiscale simulation of flow in fractured porous media using unstructured grids [Volume 53, Issue 7, 2021, Pages 4133-4152]
  • Multi-walled carbon nanotubes A study on the synergistic influence of reduced graphene oxide and MWCNTs on the mechanical properties of epoxy nanocomposite [Volume 53, Issue 6 (Special Issue), 2021, Pages 3971-3986]
  • Multi zone model Investigation on Effects of Water Addition on Performance and Emissions of an n-heptane Fueled Homogeneous Charge Compression Ignition Engine [Volume 53, Issue 3, 2021, Pages 1637-1652]
  • Multi-Zone model Investigation of the response of a multi-zone simulation code equipped with blow-by sub-model in a dual fuel spark-ignition engine [Volume 53, Issue 5, 2021, Pages 3035-3056]
  • MWCNTs-COOH Experimental investigation on MWCNTs-COOH nano fluid on 3D oscillating heat pipe [Volume 53, Issue 5 (Special Issue), 2021, Pages 3401-3416]

N

  • NACA 0012 Optimization of The Slotted Gurney-Flap Geometry Applied to NACA 0012 Airfoil for Aerodynamic Performance Improvement [Volume 53, Issue 11, 2021, Pages 5331-5348]
  • Nano Mechanical Properties and Structural Behavior of Bone at Nano Scale with Cohesive Element [Volume 53, Issue 2, 2021, Pages 745-776]
  • Nano beam Free vibration of axially functionally graded nanobeam with an attached mass based on nonlocal strain gradient theory via new ADM numerical method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1159-1178]
  • Nanocoated surface Experimental study of CuO/Water nanofluid pool boiling on the copper flat surface and measurement of the critical heat flux [Volume 53, Issue 5, 2021, Pages 3099-3114]
  • Nanocomposite A study on the synergistic influence of reduced graphene oxide and MWCNTs on the mechanical properties of epoxy nanocomposite [Volume 53, Issue 6 (Special Issue), 2021, Pages 3971-3986]
  • Nanocomposite An experimental investigation of the effect of the type of nanostructured reinforcements on the mechanical and tribological properties of epoxy based nanocomposites [Volume 53, Issue 6 (Special Issue), 2021, Pages 4009-4022]
  • Nanocomposite Experimental Studies on The Tribology Behavior of Ultra-High Molecular Weight Polyethylene /Zeolite Nanocomposite [Volume 53, Issue 10, 2021, Pages 5159-5168]
  • Nanofluid Numerical Simulation of Heat Transfer Turbulent Flow for Non-Newtonian Nanofluid in a Double Pipe Helical Heat Exchanger [Volume 53, Issue 1, 2021, Pages 221-240]
  • Nanofluid An Experimental Investigation on the Convective Heat Transfer Coefficient and Nusselt Number in Water/Carbon Nanofluid [Volume 53, Issue 1, 2021, Pages 209-220]
  • Nanofluid Numerical simulation of nanofluid flow in an annulus with porous baffles based on combination of Darcy-Brinkman-Forchheimer model and two-phase mixture model [Volume 53, Issue 3 (Special Issue), 2021, Pages 1897-1914]
  • Nanofluid Numerical analysis of flow and natural convection heat transfer in a circular enclosure heated from bottom utilizing porous layer [Volume 53, Issue 3 (Special Issue), 2021, Pages 1937-1962]
  • Nanofluid Investigation of using hybrid nanofluid-phase change material spectral splitter in photovoltaic/thermal system [Volume 53, Issue 7, 2021, Pages 4429-4454]
  • Nanofluid Numerical analysis of the effect of baffle on heat transfer enhancement nanofluid flow over a backward facing step: A correlation for the average Nusselt number [Volume 53, Issue 7, 2021, Pages 4309-4328]
  • Nanofluid Numerical investigation of the effect of thermophysical properties of nanofluid on fluid flow and heat transfer in a tube in presence of magnetic field [Volume 53, Issue 7, 2021, Pages 4329-4344]
  • Nano fluid Experimental investigation on MWCNTs-COOH nano fluid on 3D oscillating heat pipe [Volume 53, Issue 5 (Special Issue), 2021, Pages 3401-3416]
  • Nanogenerator Performance Improving Variable distance interdigitated electrodes design to improve the performance of cantilever piezoelectric thin films nanogenerators [Volume 53, Issue 4, 2021, Pages 2347-2366]
  • Nanolaminated aluminum/graphene composites Effect of Graphene Sheets Aggregation on The Dislocation-Blocking Mechanism of Nanolaminated Aluminum/Graphene Composite: Molecular Dynamics Simulation Study [Volume 53, Issue 8, 2021, Pages 4649-4664]
  • Nanomachining Global sensitivity analysis of nanomachining parameters by using dynamic scanning thermal microscope [Volume 53, Issue 4, 2021, Pages 2367-2384]
  • Nanomanipulation Experimental Extraction of Young's Modulus of MCF-7 Breast Cancer Cell Using Spherical Contact Models [Volume 53, Issue 12, 2021, Pages 5769-5784]
  • Nano-paraffin Investigation on the effect of addition of nano-titanium oxide particles to phase change material in a hybrid system for battery cooling under constant heat flux [Volume 53, Issue 7, 2021, Pages 4379-4396]
  • Nanoparticle Quantifying of viscous fingering instability in porous media [Volume 53, Issue 5, 2021, Pages 2887-2902]
  • Nanostructured reinforcement An experimental investigation of the effect of the type of nanostructured reinforcements on the mechanical and tribological properties of epoxy based nanocomposites [Volume 53, Issue 6 (Special Issue), 2021, Pages 4009-4022]
  • NASA Rotor-67 Circumferential Casing Treatment in a Transonic Fan [Volume 53, Issue 7, 2021, Pages 4189-4202]
  • Natural convection Effects of Magnetic Field on Natural Convection of Non-Newtonian Fluid in a Square Enclosure with a Central Heat Source [Volume 53, Issue 1, 2021, Pages 259-278]
  • Natural convection Numerical Study of Natural Convection Heat Transfer inside a Triangular Cavity with Flexible Sidewalls Containing a Cylindrical Heat Source [Volume 53, Issue 11, 2021, Pages 5461-5484]
  • Natural Frequencies Free vibration of axially functionally graded nanobeam with an attached mass based on nonlocal strain gradient theory via new ADM numerical method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1159-1178]
  • Natural frequency Numerical and Experimental Modal Analysis of a 400 W Polymer Electrolyte Membrane Fuel Cell [Volume 53, Issue 1, 2021, Pages 101-116]
  • Natural frequency Analyzing the effect of adsorption of Flavin Mononucleotide biomolecule on the natural frequency of biocompatible boron-nitride nanotubes [Volume 53, Issue 4 (Special Issue), 2021, Pages 2577-2588]
  • Natural gas flame Experimental Study of Injecting Water Vapor and Oil Compounds by Nebulizer on the Efficiency and Natural Gas Flame Pollution [Volume 53, Issue 1, 2021, Pages 31-40]
  • Natural gas reformer Investigation of hydrogen production process by partial oxidation of natural gas in a large non-catalytic reformer and comparison with methane steam reforming process in a small catalytic reformer [Volume 53, Issue 5 (Special Issue), 2021, Pages 3275-3292]
  • Natural Ventilation Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Natural Ventilation Numerical investigation of compartment fire under maximum and minimum of natural ventilation using flamelet generated manifold combustion model [Volume 53, Issue 5 (Special Issue), 2021, Pages 3335-3350]
  • Necrotic region Image-based numerical model for drug delivery to solid tumors [Volume 53, Issue 5 (Special Issue), 2021, Pages 3187-3200]
  • Negative stiffness structure Modeling, design and investigation of seat suspension based on negative stiffness structure to improve the vibration environment for helicopter pilots [Volume 53, Issue 4 (Special Issue), 2021, Pages 2513-2538]
  • Neo-Hookean strain energy function Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method [Volume 53, Issue 4, 2021, Pages 2331-2346]
  • Network connection Time-delay compensation for networked hardware-in-the-loop simulation of a flight control system using polynomial prediction [Volume 53, Issue 2 (Special Issue), 2021, Pages 1111-1124]
  • Networked Control System Stability Analysis of Predictive Control in Networked Control System Using Switching Control [Volume 53, Issue 10, 2021, Pages 5039-5054]
  • Neural-network Prognostics of rolling element bearings using shock pulse method and vibration method records and employing feedforward neural-network [Volume 53, Issue 4 (Special Issue), 2021, Pages 2557-2576]
  • Neural Network Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • Neural Network Investigation of penetration behavior of monolithic and multi-layered metallic targets subjected to a projectile impact [Volume 53, Issue 4, 2021, Pages 2309-2330]
  • Neuro-fuzzy network Process modeling of force behavior in the automatic bovine cortical bone milling process using adaptive neuro-fuzzy inference system [Volume 53, Issue 2 (Special Issue), 2021, Pages 1287-1306]
  • Newtonian Fluid Numerical Study of the Dynamics of Non-Newtonian Carreau Droplets under Electrowetting Phenomenon [Volume 53, Issue 1 (Special Issue), 2021, Pages 319-338]
  • Night Sky Radiative Cooling The Feasibility Study of a Night Sky Radiative Cooling System for Cooling the Intake Air of a Gas Turbine [Volume 53, Issue 1, 2021, Pages 155-172]
  • N-isopropylacrylamide Experimental study of manufacturing and characterization of a flow-focusing microchannel to produce thermoresponsive microparticles for on-demand smart drug delivery [Volume 53, Issue 5 (Special Issue), 2021, Pages 3257-3274]
  • Noise Reduction Effect of blowing on flow-induced noise reduction in a rod-airfoil [Volume 53, Issue 3 (Special Issue), 2021, Pages 1783-1798]
  • Non-condensable gas Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Non-destructive test Experimental and Numerical Looseness Detection and Assessment in Flanged Joints Using Vibro-Acoustic Modulation Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1331-1344]
  • Non-destructive test Non-destructive evaluation of internal cracks in glass fiber-reinforced polymers using digital shearing interferometry [Volume 53, Issue 6 (Special Issue), 2021, Pages 4063-4078]
  • Non-equilibrium thermal Study of the effective parameters on the performance of a micro thermophotovoltaic system with micro porous combustion chamber [Volume 53, Issue 5, 2021, Pages 2921-2934]
  • Nonholonomic constraint Modeling and trajectory tracking control of non-holonomic mobile robot with revolute-prismatic joints [Volume 53, Issue 2 (Special Issue), 2021, Pages 1041-1064]
  • Nonlinear algorithm Control of quadrotor by using state-dependent Riccati equation method and analyzing its dynamic performance under wind field [Volume 53, Issue 4 (Special Issue), 2021, Pages 2423-2438]
  • Nonlinear buckling Study of the Analytical Solutions and Modelling of Nonlinear Buckling in Bellows [Volume 53, Issue 2, 2021, Pages 729-744]
  • Nonlinear disturbance observer Active Fault Tolerant Control of Wind Turbine Systems using Disturbance Observer-based Sliding Mode and Time Delay Estimation [Volume 53, Issue 8, 2021, Pages 4517-4534]
  • Nonlinear Energy Sink Using nonlinear energy sink to improve the dynamic behavior of rectangular plate under supersonic aerodynamic flow at different angles [Volume 53, Issue 6, 2021, Pages 3511-3528]
  • Nonlinear Energy Sink Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2021, Pages 5851-5866]
  • Nonlinear optimal control Nonlinear optimal control of an active transfemoral prosthesis using state dependent Riccati equation approach [Volume 53, Issue 4, 2021, Pages 2117-2136]
  • Nonlinear Simulation Quantifying of viscous fingering instability in porous media [Volume 53, Issue 5, 2021, Pages 2887-2902]
  • Nonlinear vibration analysis Investigation of Nonlinear Vibrations of A Cantilever Beam with A Transverse Fatigue Crack [Volume 53, Issue 10, 2021, Pages 5069-5084]
  • Nonlinear vibrations Nonlinear Vibrations of Graphene Reinforced Pipes Conveying Fluid [Volume 53, Issue 8, 2021, Pages 4483-4500]
  • Nonlinear Winkler-Pasternak foundation Superharmonic and Subharmonic Resonance Analysis of A Rectangular Hyperelastic Membrane Resting on Nonlinear Elastic Foundation Using The Method of Multiple Scales [Volume 53, Issue 8, 2021, Pages 4535-4564]
  • Nonlocal strain gradient theory Free vibration of axially functionally graded nanobeam with an attached mass based on nonlocal strain gradient theory via new ADM numerical method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1159-1178]
  • Non-Newtonian The Effect of Non-Newtonian Behavior on the Transport of Low Density Lipoprotein Particles in the Vortex Region in the Human Carotid Artery [Volume 53, Issue 9, 2021, Pages 4789-4806]
  • Non-Newtonian blood flow Numerical Simulation of Non-Newtonian Blood Flow in A Three-Dimensional Non-Planar Bifurcation with Stenosis [Volume 53, Issue 9, 2021, Pages 4865-4886]
  • Non- Newtonian fluid Effects of Magnetic Field on Natural Convection of Non-Newtonian Fluid in a Square Enclosure with a Central Heat Source [Volume 53, Issue 1, 2021, Pages 259-278]
  • Non-Newtonian fluid Investigation of Heat Transfer of Non-Newtonian Pseudo-Plastic Fluids in Porous Heat Exchangers [Volume 53, Issue 1, 2021, Pages 241-258]
  • Non-Newtonian fluid Numerical Study of the Dynamics of Non-Newtonian Carreau Droplets under Electrowetting Phenomenon [Volume 53, Issue 1 (Special Issue), 2021, Pages 319-338]
  • Non-Newtonian fluid Analytical-Numerical Investigation of Unequal Sized Droplets of Dilatants' Fluid in T-Junction with Unequal Length Branches [Volume 53, Issue 3, 2021, Pages 1417-1438]
  • Non-Newtonian fluid Stability analysis of shear-thinning flow in narrow gap Taylor–Couette axial flow [Volume 53, Issue 3 (Special Issue), 2021, Pages 1745-1766]
  • Non-Newtonian fluid Comparison of natural and synthetic carotid arteries in the normal and occluded cases considering the effect of blood on elastic wall of artery [Volume 53, Issue 5, 2021, Pages 2821-2838]
  • Non-Newtonian fluid Effect of Magnetic Field on Motion, Deformation, and Separation Time of Newtonian and Non-Newtonian Droplets in a Flow‐Focusing Microchannel [Volume 53, Issue 11, 2021, Pages 5311-5330]
  • Non-planar bifurcation Numerical Simulation of Non-Newtonian Blood Flow in A Three-Dimensional Non-Planar Bifurcation with Stenosis [Volume 53, Issue 9, 2021, Pages 4865-4886]
  • Non-premixed Analytical model for the non-premixed combustion of the titanium dust cloud in counter-flow geometry [Volume 53, Issue 5 (Special Issue), 2021, Pages 3307-3316]
  • Non- Reaction Investigation of Geometric Characteristics on the Non-Reaction Supersonic Flow inside the Channel with the Presence of Cavities [Volume 53, Issue 11, 2021, Pages 5409-5428]
  • Non-uniform rational B-spline Accurate Calculation of Nodal Vectors in Isogeometric Analysis of Shell Structures Using Greville Points [Volume 53, Issue 10, 2021, Pages 5185-5202]
  • NREL Phase VI Blade A numerical investigation on the effect of blade tip shapes on power generation of a horizontal axis wind turbine [Volume 53, Issue 5, 2021, Pages 2791-2806]
  • Nucleation Two-dimensional simulation of nucleation pool boiling and investigation of phase change mechanism at low heat fluxes [Volume 53, Issue 3 (Special Issue), 2021, Pages 1883-1896]
  • Numerical Analysis Numerical Analysis of Parameters Affecting Turbulent Boundary Layer Trailing-Edge Noise [Volume 53, Issue 1 (Special Issue), 2021, Pages 437-452]
  • Numerical Analysis Numerical Analysis of Secondary Flow Strength Induced by Electrohydrodynamic Actuator Through a Smooth Channel [Volume 53, Issue 3, 2021, Pages 1401-1416]
  • Numerical Analysis Numerical analysis of the effect of baffle on heat transfer enhancement nanofluid flow over a backward facing step: A correlation for the average Nusselt number [Volume 53, Issue 7, 2021, Pages 4309-4328]
  • Numerical Analysis Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Numerical Analysis Numerical investigation of the effect of thermophysical properties of nanofluid on fluid flow and heat transfer in a tube in presence of magnetic field [Volume 53, Issue 7, 2021, Pages 4329-4344]
  • Numerical-experimental investigation Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Numerical modeling Investigation of the Humidifier Performance of Adding Gas Diffusion Layers Around Membrane for Fuel Cell Application [Volume 53, Issue 3, 2021, Pages 1653-1666]
  • Numerical study Numerical simulation of mixed convection of Bingham fluid between two coaxial cylinders [Volume 53, Issue 5 (Special Issue), 2021, Pages 3417-3428]
  • Numerical study Numerical study and investigation of the effect of magnetic field on fluid hydrodynamic behavior [Volume 53, Issue 5, 2021, Pages 2857-2868]
  • Numerical weather prediction Wind simulation in a complex terrain by numerical weather prediction method using large eddy simulation [Volume 53, Issue 7, 2021, Pages 4221-4240]
  • Nu number Study of the Flow and Heat Transfer of Pulsed Sinusoidal Impinging Jet at Distances Close To the Concave Surface [Volume 53, Issue 9, 2021, Pages 4943-4960]
  • Nusselt number An Experimental Investigation on the Convective Heat Transfer Coefficient and Nusselt Number in Water/Carbon Nanofluid [Volume 53, Issue 1, 2021, Pages 209-220]
  • Nusselt number Investigating the Fluid-Solid Interaction in Incompressible Flow and The Effect of Oscillation Amplitude on Heat Transfer [Volume 53, Issue 9, 2021, Pages 4747-4772]
  • Nusselt number Convection Heat transfer Fe3O4/Water in a Square microchannel Under Uniform Heat Flux and Magnetic Field [Volume 53, Issue 9, 2021, Pages 4925-4942]

O

  • Object Manipulation Planar Object Manipulation with Multi Fingers Robot Located on a Moving Hand Under Rolling Grasp Constrains [Volume 53, Issue 2, 2021, Pages 943-958]
  • Oblique impact Numerical Investigation of the Effect of Shell Material and Thickness on the Mechanics of Motorcycle Helmets Impact [Volume 53, Issue 2, 2021, Pages 687-708]
  • Offshore Jacket Structure Damage detection of offshore jacket structure using dynamic responses based on simulated model, intact state of real model and deep auto-encoder neural network [Volume 53, Issue 6 (Special Issue), 2021, Pages 3783-3808]
  • Oil recovery Experimental Study of Surfactant Type Effects on the Foam Stability and Mobility With the Approach of Enhancing Oil Recovery [Volume 53, Issue 1 (Special Issue), 2021, Pages 339-356]
  • OpenFOAM Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Optimization algorithms Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Organic Rankine cycle Thermodynamic Analysis of a Novel Power, Cooling, Hydrogen and Oxygen Multi-Generation Combined Cycle Based on the Sabalan Geothermal Wells [Volume 53, Issue 1, 2021, Pages 135-154]
  • Organic Rankine cycle Thermodynamic analysis and comparison of two new tri-generation (hydrogen, power, heating) systems using geothermal energy [Volume 53, Issue 5, 2021, Pages 2983-3002]
  • Organic Rankine cycle Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat [Volume 53, Issue 9, 2021, Pages 4999-5016]
  • Orthogonal Stiffeners Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Orthopedic biomechanics The Prediction of Femoral Fracture Location Using Extended Finite Element Method [Volume 53, Issue 8, 2021, Pages 4595-4608]
  • Oscillatory fluid flow Response analysis of primary cilia of the cell to the oscillatory fluid flow by using fluid-structure interaction method [Volume 53, Issue 5 (Special Issue), 2021, Pages 3293-3306]
  • Osteoporosis Prediction of femoral fracture pattern using finite element analysis of dual-energy X-ray absorptiometry -based model [Volume 53, Issue 2 (Special Issue), 2021, Pages 1223-1236]
  • Output work Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Oxygen Exchange Computational Fluid Dynamics Analysis of Effects of Housing Expansion Angle, Stroke Volume and Path Length of the Fiber Bundles on Function of the Artificial Lung [Volume 53, Issue 11, 2021, Pages 5389-5408]

P

  • Parallel cable robot Actuators redundancy resolution scheme with computational time reduction purpose for parallel cable robots with considering the rupture limits of the cables [Volume 53, Issue 6, 2021, Pages 3479-3496]
  • Parallel injection Experimental Investigation of a High Aspect Ratio Rectangular Liquid Jet in Parallel Airflow [Volume 53, Issue 11, 2021, Pages 5429-5444]
  • Parallel Processing Developing an alternating direction explicit-implicit domain-decomposition approach to solve heat transfer equation on graphics processing unit [Volume 53, Issue 3 (Special Issue), 2021, Pages 1915-1936]
  • Parameter estimation Reconstruction of Electrical Tomography Images based on Parameter Estimation Method in Inverse Heat Transfer [Volume 53, Issue 1 (Special Issue), 2021, Pages 483-498]
  • Parametric Study Removal of Lead Heavy Metal from Wastewater by Crystallization Process and Investigation of the Effective Parameters [Volume 53, Issue 11, 2021, Pages 5349-5366]
  • Pareto Designing Optimum Multi-Domain System by Integrating Bond Graph and Genetic Programming [Volume 53, Issue 2, 2021, Pages 1015-1038]
  • Partial oxidation Numerical Investigation of the Performance of Hydrogen Production Process by Production Gas Recirculation [Volume 53, Issue 1 (Special Issue), 2021, Pages 623-638]
  • Partial oxidation Investigation of hydrogen production process by partial oxidation of natural gas in a large non-catalytic reformer and comparison with methane steam reforming process in a small catalytic reformer [Volume 53, Issue 5 (Special Issue), 2021, Pages 3275-3292]
  • Particle deposition and dispersion Investigation of the Effect of Ventilation System Inlet Location on Particle Motion in a Room Using Multi Relaxation Time-Lattice Boltzmann Method [Volume 53, Issue 3, 2021, Pages 1457-1468]
  • Particulate Material Pollutant Modeling of turbulent atmospheric boundary layer and dispersion of solid pollutant particles in an urban area using large eddy simulation [Volume 53, Issue 5, 2021, Pages 2839-2856]
  • Passive Cooling The Feasibility Study of a Night Sky Radiative Cooling System for Cooling the Intake Air of a Gas Turbine [Volume 53, Issue 1, 2021, Pages 155-172]
  • Path Optimization A Fast Warehouse Inventory Micro Aerial Vehicle System Equipped with Visual Guidance and Navigation Algorithm [Volume 53, Issue 12, 2021, Pages 5785-5808]
  • Pb removal Removal of Lead Heavy Metal from Wastewater by Crystallization Process and Investigation of the Effective Parameters [Volume 53, Issue 11, 2021, Pages 5349-5366]
  • PDMS Fabrication and characterization of a flexible nanogenerator using reverse electrowetting concept [Volume 53, Issue 5, 2021, Pages 3023-3034]
  • Performance Evaluation Kinematic and dynamic performance evaluation of a four degrees of freedom parallel robot [Volume 53, Issue 4, 2021, Pages 2055-2072]
  • Personalized ventilation system Experimental investigation of personalized ventilation effects on temperature, velocity, and draught discomfort distribution in an office [Volume 53, Issue 7, 2021, Pages 4397-4410]
  • Phase change Numerical Investigation of Hybrid Wick Structure Effect on Thermal Performance of a Thin Flat Heat Pipe [Volume 53, Issue 11, 2021, Pages 5485-5504]
  • Phase change material Investigation of using hybrid nanofluid-phase change material spectral splitter in photovoltaic/thermal system [Volume 53, Issue 7, 2021, Pages 4429-4454]
  • Phase change material Thermal performance evaluation of a greenhouse solar dryer equipped with photovoltaic cells and phase change material [Volume 53, Issue 5 (Special Issue), 2021, Pages 3367-3384]
  • Phase-change materials Thermal Analysis of a Solar Wall Equipped with Photovoltaic Cells and Phase-Change Materials [Volume 53, Issue 1, 2021, Pages 173-190]
  • Photocatalytic Reactor Simulation of a Photocatalytic Reactor Using Finite Volume and Discrete Ordinate Method: A Parametric Study [Volume 53, Issue 1 (Special Issue), 2021, Pages 573-588]
  • Photolithography Experimental study of manufacturing and characterization of a flow-focusing microchannel to produce thermoresponsive microparticles for on-demand smart drug delivery [Volume 53, Issue 5 (Special Issue), 2021, Pages 3257-3274]
  • Photophoresis Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Photovoltaic Techno-Economic Feasibility of Energy Supply Systems from Renewable Sources of Solar and Biomass in Rural Areas Located In Cold and Dry Climate [Volume 53, Issue 1, 2021, Pages 81-100]
  • Photovoltaic cell Thermal Analysis of a Solar Wall Equipped with Photovoltaic Cells and Phase-Change Materials [Volume 53, Issue 1, 2021, Pages 173-190]
  • Photovoltaic cell Thermal performance evaluation of a greenhouse solar dryer equipped with photovoltaic cells and phase change material [Volume 53, Issue 5 (Special Issue), 2021, Pages 3367-3384]
  • Photovoltaic module Theoretical comparison of thermal and electrical performance of different models of sheet and tube type solar photovoltaic - thermal water collector [Volume 53, Issue 5, 2021, Pages 2903-2920]
  • Photovoltaic/Thermal System Investigation of using hybrid nanofluid-phase change material spectral splitter in photovoltaic/thermal system [Volume 53, Issue 7, 2021, Pages 4429-4454]
  • PID controller Control of droplet size in a two-phase microchannel using PID controller: A novel experimental study [Volume 53, Issue 7, 2021, Pages 4279-4292]
  • Piezoelectric 2-Dimensional Electroelastic Analysis of Piezoelectric Cylinders Using First-Order Shear Deformation and First-Order Electric Potential Theories [Volume 53, Issue 2, 2021, Pages 815-832]
  • Piezoelectric CubeSat antenna vibration control using piezoelectric bender considering system requirements [Volume 53, Issue 4, 2021, Pages 2217-2238]
  • Piezoelectric Nanolayer Variable distance interdigitated electrodes design to improve the performance of cantilever piezoelectric thin films nanogenerators [Volume 53, Issue 4, 2021, Pages 2347-2366]
  • Piezoresistant auxetic sensors Fabrication and testing of re-entrant auxetic samples and sensor: Numerically and experimentally [Volume 53, Issue 6 (Special Issue), 2021, Pages 3987-4008]
  • Pilot seat Modeling, design and investigation of seat suspension based on negative stiffness structure to improve the vibration environment for helicopter pilots [Volume 53, Issue 4 (Special Issue), 2021, Pages 2513-2538]
  • Pipe Heat Exchanger Numerical simulation of heat transfer and pressure drop of pseudo-plastic fluid in a pipe heat exchanger equipped with a modified twisted tape [Volume 53, Issue 5, 2021, Pages 3077-3098]
  • Pipes conveying fluid Nonlinear Vibrations of Graphene Reinforced Pipes Conveying Fluid [Volume 53, Issue 8, 2021, Pages 4483-4500]
  • Pitch angle control Active Fault Tolerant Control of Wind Turbine Systems using Disturbance Observer-based Sliding Mode and Time Delay Estimation [Volume 53, Issue 8, 2021, Pages 4517-4534]
  • Pitting corrosion Simulation of Pitting Corrosion on Gas Turbine Compressor Blade [Volume 53, Issue 10, 2021, Pages 5123-5140]
  • Planar microchannel Numerical analysis of distinction boundary of surface roughness and wall blocks in laminar pressure-driven flow within the rugged microchannels [Volume 53, Issue 5 (Special Issue), 2021, Pages 3241-3256]
  • Plane sound wave Sound Transmission Loss of Truncated Conical Shells with Porous Materials [Volume 53, Issue 2, 2021, Pages 923-942]
  • Plasma Experimental study of machining residual stresses in plasma-assisted turning process [Volume 53, Issue 4, 2021, Pages 2385-2406]
  • Plasma actuator Power Improvement of a Commercial Large Scale Vertical-Axis Wind Turbine Using Plasma Actuators [Volume 53, Issue 3, 2021, Pages 1487-1504]
  • Plastic Deformation Effect of intense impulsive loading on performance of multi-layered plates [Volume 53, Issue 4 (Special Issue), 2021, Pages 2639-2670]
  • Plastic strain localization Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Plate bending Fractional calculus approach for bending of viscoelastic plate using two-variable refined plate theory [Volume 53, Issue 4, 2021, Pages 2287-2308]
  • Pneumatic structures Analysis of dynamic instability in sandwich thick beams with flexible functional core subjected to a follower force [Volume 53, Issue 2, 2021, Pages 863-880]
  • Point Cloud Three-dimensional surface capture from the back anatomy to quantify three-dimensional vertebral column curvatures without using anatomical markers [Volume 53, Issue 4 (Special Issue), 2021, Pages 2629-2638]
  • Pollutants Experimental Study of Injecting Water Vapor and Oil Compounds by Nebulizer on the Efficiency and Natural Gas Flame Pollution [Volume 53, Issue 1, 2021, Pages 31-40]
  • Pollution Investigation of Performance and Emission Characteristic of a Reactivity Controlled Compression Ignition Engine Fueled By a Mixture of Diesel and Syngas Derived From Biomass Gasification [Volume 53, Issue 1, 2021, Pages 17-30]
  • Polycarbonate sheet Feasibility study of single point incremental forming of aircraft canopy for polycarbonate sheet [Volume 53, Issue 4 (Special Issue), 2021, Pages 2751-2768]
  • Poly-lactic acid Evaluating the effects of material extrusion 3D printing process parameters on shape-shifting of Poly-lactic acid 4D-printed structures [Volume 53, Issue 6 (Special Issue), 2021, Pages 4095-4110]
  • Polymer Electrolyte Membrane Fuel Cell Network Modeling to Investigate the Effect of Coupling the Transport Phenomena on Water Distribution in Gas Diffusion Layer [Volume 53, Issue 11, 2021, Pages 5505-5528]
  • Polymer electrolyte membrane fuel cells Numerical and Experimental Modal Analysis of a 400 W Polymer Electrolyte Membrane Fuel Cell [Volume 53, Issue 1, 2021, Pages 101-116]
  • Polymer nanocomposite Investigation on Mechanical Properties of Polyoxymethylene Reinforced by Carbon Nanotube Using Molecular Dynamics [Volume 53, Issue 8, 2021, Pages 4691-4700]
  • Polynomial prediction Time-delay compensation for networked hardware-in-the-loop simulation of a flight control system using polynomial prediction [Volume 53, Issue 2 (Special Issue), 2021, Pages 1111-1124]
  • Polyoxymethylene Investigation on Mechanical Properties of Polyoxymethylene Reinforced by Carbon Nanotube Using Molecular Dynamics [Volume 53, Issue 8, 2021, Pages 4691-4700]
  • Polyurea Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • Pool boiling Two-dimensional simulation of nucleation pool boiling and investigation of phase change mechanism at low heat fluxes [Volume 53, Issue 3 (Special Issue), 2021, Pages 1883-1896]
  • Pool boiling Experimental study of CuO/Water nanofluid pool boiling on the copper flat surface and measurement of the critical heat flux [Volume 53, Issue 5, 2021, Pages 3099-3114]
  • Pore network model Network Modeling to Investigate the Effect of Coupling the Transport Phenomena on Water Distribution in Gas Diffusion Layer [Volume 53, Issue 11, 2021, Pages 5505-5528]
  • Porous baffle Numerical simulation of nanofluid flow in an annulus with porous baffles based on combination of Darcy-Brinkman-Forchheimer model and two-phase mixture model [Volume 53, Issue 3 (Special Issue), 2021, Pages 1897-1914]
  • Porous beam Piezoelectric Energy Harvesting Using a Porous Beam Under Fluid-Induced Vibrations [Volume 53, Issue 8, 2021, Pages 4633-4648]
  • Porous Layer Investigation of Heat Transfer of Non-Newtonian Pseudo-Plastic Fluids in Porous Heat Exchangers [Volume 53, Issue 1, 2021, Pages 241-258]
  • Porous Layer Numerical analysis of flow and natural convection heat transfer in a circular enclosure heated from bottom utilizing porous layer [Volume 53, Issue 3 (Special Issue), 2021, Pages 1937-1962]
  • Porous materials Sound Transmission Loss of Truncated Conical Shells with Porous Materials [Volume 53, Issue 2, 2021, Pages 923-942]
  • Porous Media Study of the effective parameters on the performance of a micro thermophotovoltaic system with micro porous combustion chamber [Volume 53, Issue 5, 2021, Pages 2921-2934]
  • Porous Media Investigation of hydrogen production process by partial oxidation of natural gas in a large non-catalytic reformer and comparison with methane steam reforming process in a small catalytic reformer [Volume 53, Issue 5 (Special Issue), 2021, Pages 3275-3292]
  • Potential Function Tracking control of quadrotors in the presence of obstacles based on potential field method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1095-1110]
  • Powder bed fusion Optimization of Additive Manufactured Part Made by Ti6Al4V Alloy to Achieve Best Relative Density and Surface Roughness [Volume 53, Issue 10, 2021, Pages 5169-5184]
  • Power Generation Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Power generation system Thermodynamic Analysis of Power Generation System Based on Solid Oxide Fuel Cell With External Reforming [Volume 53, Issue 1 (Special Issue), 2021, Pages 605-622]
  • Power-law model Effects of Magnetic Field on Natural Convection of Non-Newtonian Fluid in a Square Enclosure with a Central Heat Source [Volume 53, Issue 1, 2021, Pages 259-278]
  • Prandtl’s stress distribution Approximate Torsional Analysis of Arbitrary Trapezoidal Bars by Kantorovich Method [Volume 53, Issue 10, 2021, Pages 5203-5220]
  • Pre combustion chamber Investigation to set the type of pre-chamber fuel system in heavy gas engine HIMSEN 35/40 [Volume 53, Issue 5, 2021, Pages 2935-2952]
  • Predict Stability Analysis of Predictive Control in Networked Control System Using Switching Control [Volume 53, Issue 10, 2021, Pages 5039-5054]
  • Predictive control Modeling and trajectory tracking control of non-holonomic mobile robot with revolute-prismatic joints [Volume 53, Issue 2 (Special Issue), 2021, Pages 1041-1064]
  • Pre-Placed Laser Cladding of TiC/316LSS and Analysis of Input Parameters using Response Surface Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1269-1286]
  • Pressure drop Hydrothermal performance of trapezoidal fin equipped with vortex generator and hole: Investigation of the effect of vortex generator and hole position [Volume 53, Issue 3 (Special Issue), 2021, Pages 1963-1980]
  • Pressure drop Modeling and parametric analysis of two-phase fluid stability in boiling process in a thermal channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1861-1882]
  • Pressure drop Experimental investigation of heat transfer and pressure drop in perforated ribs in the solar air heater channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1981-2000]
  • Pressure drop Numerical study and investigation of the effect of magnetic field on fluid hydrodynamic behavior [Volume 53, Issue 5, 2021, Pages 2857-2868]
  • Pressure Waves Numerical simulation of water hammer in various fluids due to a fast valve closure [Volume 53, Issue 7, 2021, Pages 4171-4188]
  • Primary cilia Response analysis of primary cilia of the cell to the oscillatory fluid flow by using fluid-structure interaction method [Volume 53, Issue 5 (Special Issue), 2021, Pages 3293-3306]
  • Product recirculation Numerical Investigation of the Performance of Hydrogen Production Process by Production Gas Recirculation [Volume 53, Issue 1 (Special Issue), 2021, Pages 623-638]
  • Prognosis and health management Age-Based Clustering Prognostics of Gas Turbines and Evaluation of the Proposed Method Robustness in Data Deficient Conditions [Volume 53, Issue 2, 2021, Pages 777-798]
  • Proper Orthogonal Decomposition Development of parametric and time dependent reduced order model for diffusion and convection-diffusion problems based on proper orthogonal decomposition method [Volume 53, Issue 7, 2021, Pages 4241-4260]
  • Proton exchange membrane Thermodynamic analysis and comparison of two new tri-generation (hydrogen, power, heating) systems using geothermal energy [Volume 53, Issue 5, 2021, Pages 2983-3002]
  • Proton exchange membrane electrolysis Thermodynamic Analysis of a Novel Power, Cooling, Hydrogen and Oxygen Multi-Generation Combined Cycle Based on the Sabalan Geothermal Wells [Volume 53, Issue 1, 2021, Pages 135-154]
  • Proton exchange membrane fuel cell Investigation of the Humidifier Performance of Adding Gas Diffusion Layers Around Membrane for Fuel Cell Application [Volume 53, Issue 3, 2021, Pages 1653-1666]
  • Proton exchange membrane fuel cell Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Proton-exchange membrane fuel cell Simulation, manufacturing and test of a transparent proton-exchange membrane fuel cell [Volume 53, Issue 3 (Special Issue), 2021, Pages 2031-2052]
  • Protuberance Numerical/Experimental Investigation of the Presence of a Protuberance in a Convergent – Divergent Nozzle in Supersonic Regime to Control the Thrust Vector [Volume 53, Issue 9, 2021, Pages 4887-4904]
  • Pseudo-boiling phenomenon Influence of Pseudo-Boiling Phenomenon and the Mass Flux Ratio on the Dynamics of Transcritical Shear Flame [Volume 53, Issue 9, 2021, Pages 4961-4980]
  • Pseudo-Plastics Fluid Numerical simulation of heat transfer and pressure drop of pseudo-plastic fluid in a pipe heat exchanger equipped with a modified twisted tape [Volume 53, Issue 5, 2021, Pages 3077-3098]
  • Pulsatile Flow Computational Fluid Dynamics Analysis of Effects of Housing Expansion Angle, Stroke Volume and Path Length of the Fiber Bundles on Function of the Artificial Lung [Volume 53, Issue 11, 2021, Pages 5389-5408]
  • Pump characteristics Experimental Study of the Effects of Fluid Physical Properties and Working Temperature on Heat Transfer in Conduction Pump [Volume 53, Issue 3, 2021, Pages 1607-1620]
  • Purge time Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Pyrosim Investigating the Effects of Loung Chair Fire in a Cinema Hall Using Displacement, Impingement Jet and Stratum Ventilation Systems [Volume 53, Issue 11, 2021, Pages 5573-5594]

Q

  • Quadrotor Attitude Stabilization of Quadrotor Using Adaptive Fuzzy Proportional Integral Derivative Controller [Volume 53, Issue 2 (Special Issue), 2021, Pages 1081-1094]
  • Quadrotor Tracking control of quadrotors in the presence of obstacles based on potential field method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1095-1110]
  • Quadrotor Control of quadrotor by using state-dependent Riccati equation method and analyzing its dynamic performance under wind field [Volume 53, Issue 4 (Special Issue), 2021, Pages 2423-2438]
  • Quadtree meshes Application of Nonconforming Quadtree Grids in the Finite Element Method [Volume 53, Issue 2, 2021, Pages 673-686]
  • Quasi-static loading Micro-Mechanical Damage Analysis of Al-TiC Particulate Reinforced Composites by Peridynamic Theory [Volume 53, Issue 8, 2021, Pages 4701-4716]
  • Quasi-steady Aerodynamic Altitude cascade control of an avian-like flapping robot considering articulated wings and quasi-steady [Volume 53, Issue 4, 2021, Pages 2137-2154]

R

  • Radial basis functions Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method [Volume 53, Issue 4, 2021, Pages 2331-2346]
  • Range Extension Circumferential Casing Treatment in a Transonic Fan [Volume 53, Issue 7, 2021, Pages 4189-4202]
  • Rankine cycle Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Rankine cycle Thermodynamic and Thermo-Economic Analysis of the Absorption Heat Transformer, Organic Rankine Cycle, and Reverse Osmosis Desalination Combined System [Volume 53, Issue 1 (Special Issue), 2021, Pages 639-654]
  • Rapid Prototyping Feasibility study of single point incremental forming of aircraft canopy for polycarbonate sheet [Volume 53, Issue 4 (Special Issue), 2021, Pages 2751-2768]
  • Rayleigh-Benard convection Investigation of Heat Transfer of Non-Newtonian Pseudo-Plastic Fluids in Porous Heat Exchangers [Volume 53, Issue 1, 2021, Pages 241-258]
  • Reactivity controlled compression ignition engine Investigation of Performance and Emission Characteristic of a Reactivity Controlled Compression Ignition Engine Fueled By a Mixture of Diesel and Syngas Derived From Biomass Gasification [Volume 53, Issue 1, 2021, Pages 17-30]
  • Reactivity controlled engine Effect of Start of Injection Timing on Waste Heat Recovery Capacity in a Reactivity Controlled Compression Ignition Engine [Volume 53, Issue 1, 2021, Pages 3-16]
  • Reactor containment Investigation of Thermo-Hydraulic Parameters of Reactor Containment due to Cold-Leg Break Accident [Volume 53, Issue 3, 2021, Pages 1591-1606]
  • Rectangular hyperelastic membrane Superharmonic and Subharmonic Resonance Analysis of A Rectangular Hyperelastic Membrane Resting on Nonlinear Elastic Foundation Using The Method of Multiple Scales [Volume 53, Issue 8, 2021, Pages 4535-4564]
  • Rectangular jet Rectangular liquid jets injected transversely into subsonic crossflow [Volume 53, Issue 5 (Special Issue), 2021, Pages 3117-3134]
  • Reduced graphene oxide A study on the synergistic influence of reduced graphene oxide and MWCNTs on the mechanical properties of epoxy nanocomposite [Volume 53, Issue 6 (Special Issue), 2021, Pages 3971-3986]
  • Reduced Order Model Development of parametric and time dependent reduced order model for diffusion and convection-diffusion problems based on proper orthogonal decomposition method [Volume 53, Issue 7, 2021, Pages 4241-4260]
  • Redundancy Resolution Actuators redundancy resolution scheme with computational time reduction purpose for parallel cable robots with considering the rupture limits of the cables [Volume 53, Issue 6, 2021, Pages 3479-3496]
  • Redundant Parallel Robot Actuators redundancy resolution scheme with computational time reduction purpose for parallel cable robots with considering the rupture limits of the cables [Volume 53, Issue 6, 2021, Pages 3479-3496]
  • Refined plate theory Fractional calculus approach for bending of viscoelastic plate using two-variable refined plate theory [Volume 53, Issue 4, 2021, Pages 2287-2308]
  • Regasification Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Regression analysis Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]
  • Reissner-Mindlin shells Accurate Calculation of Nodal Vectors in Isogeometric Analysis of Shell Structures Using Greville Points [Volume 53, Issue 10, 2021, Pages 5185-5202]
  • Relative density Optimization of Additive Manufactured Part Made by Ti6Al4V Alloy to Achieve Best Relative Density and Surface Roughness [Volume 53, Issue 10, 2021, Pages 5169-5184]
  • Reliability Age-Based Clustering Prognostics of Gas Turbines and Evaluation of the Proposed Method Robustness in Data Deficient Conditions [Volume 53, Issue 2, 2021, Pages 777-798]
  • Reliability Flutter reliability analysis of laminated composite plates [Volume 53, Issue 6 (Special Issue), 2021, Pages 3925-3938]
  • Reliability An Improved Failure Modes and Effects Analysis as a New Framework to perform the Function Analysis Phase of products in the Value Engineering [Volume 53, Issue 8, 2021, Pages 4665-4690]
  • Remaining useful life estimation Age-Based Clustering Prognostics of Gas Turbines and Evaluation of the Proposed Method Robustness in Data Deficient Conditions [Volume 53, Issue 2, 2021, Pages 777-798]
  • Residual stress Experimental study of machining residual stresses in plasma-assisted turning process [Volume 53, Issue 4, 2021, Pages 2385-2406]
  • Residual stress Investigation of the effect of welding path on residual stresses and deformations in peripheral welding of steel pipe [Volume 53, Issue 4 (Special Issue), 2021, Pages 2735-2750]
  • Residual stress Experimental Study of Effects of Hydrogen Embrittlement and Residual Stress on Mechanical Properties of GTD450 [Volume 53, Issue 12, 2021, Pages 5659-5678]
  • Residual Stress and Surface Elasticity Instability and frequency sensitivity analysis of single-walled carbon nanotubes conveying fluid under thermomagnetic field considering the surface effect [Volume 53, Issue 6 (Special Issue), 2021, Pages 3875-3890]
  • Response Surface Method A new method for estimating the compressive strain of cellular structures using microstructure of foams based on Laguerre tessellations [Volume 53, Issue 6, 2021, Pages 3629-3644]
  • Response surface methodology Statistical analysis and optimization of tensile strength of Al7075 butt joint produced by friction stir welding and submerged friction stir welding via response surface methodology and desirability approach [Volume 53, Issue 4 (Special Issue), 2021, Pages 2719-2734]
  • Reverse osmosis Thermodynamic and Thermo-Economic Analysis of the Absorption Heat Transformer, Organic Rankine Cycle, and Reverse Osmosis Desalination Combined System [Volume 53, Issue 1 (Special Issue), 2021, Pages 639-654]
  • Reverse osmosis Investigate of Hydrodynamic and Mass Transfer in the Spacer-Filled Channel of Reverse Osmosis Module [Volume 53, Issue 1 (Special Issue), 2021, Pages 393-410]
  • Revolute-Prismatic joints Modeling and trajectory tracking control of non-holonomic mobile robot with revolute-prismatic joints [Volume 53, Issue 2 (Special Issue), 2021, Pages 1041-1064]
  • Richardson number Numerical simulation of Holmboe waves in intrusive gravity current using LES method [Volume 53, Issue 7, 2021, Pages 4261-4278]
  • Ring & stringer stiffeners Free and Forced Vibration Analysis of Stiffened Cylindrical Shells under Moving Internal Pressure [Volume 53, Issue 12, 2021, Pages 5867-5886]
  • Ritz method Thermal Stress Analysis of the Carbon Nanotube Reinforced Composite Cylindrical Shells [Volume 53, Issue 10, 2021, Pages 5269-5292]
  • Robot/prosthesis system Nonlinear optimal control of an active transfemoral prosthesis using state dependent Riccati equation approach [Volume 53, Issue 4, 2021, Pages 2117-2136]
  • Robust Control Modified Variable Structure Estimation and Control for Constrained Landing on Mars [Volume 53, Issue 10, 2021, Pages 5055-5068]
  • Robust estimation Modified Variable Structure Estimation and Control for Constrained Landing on Mars [Volume 53, Issue 10, 2021, Pages 5055-5068]
  • Robust Kalman filter Fault detection and isolation based on robust Kalman filter for discrete-time systems with stochastic and norm-bounded uncertainties [Volume 53, Issue 6 (Special Issue), 2021, Pages 3825-3840]
  • Rolling element bearings Prognostics of rolling element bearings using shock pulse method and vibration method records and employing feedforward neural-network [Volume 53, Issue 4 (Special Issue), 2021, Pages 2557-2576]
  • Rolling resistance Investigation of vehicle energy demand considering the modified tire power loss [Volume 53, Issue 6, 2021, Pages 3615-3628]
  • Roll stability Combination of active braking and semi-active suspension systems to improve the roll and yaw vehicle stability [Volume 53, Issue 6, 2021, Pages 3549-3570]
  • Rotating beam Stability and bifurcation of a rotating blade with varying speed [Volume 53, Issue 4 (Special Issue), 2021, Pages 2459-2472]
  • Rotating disk Analytical modeling of elastic limit angular velocity in a rotating disk of a functionally graded material under mechanical-thermal loading conditions [Volume 53, Issue 4 (Special Issue), 2021, Pages 2589-2612]
  • Rotating stall A Theory for Predicting Stall Cell Transient Behavior [Volume 53, Issue 9, 2021, Pages 4773-4788]
  • Rotor dynamics Sensitivity Analysis of Rotor Dynamic Behavior to Manufacturing Tolerances Based on Global Sensitivity Analysis and Statistical Methods [Volume 53, Issue 8, 2021, Pages 4501-4516]

S

  • Sabalan geothermal power plant Thermodynamic Analysis of a Novel Power, Cooling, Hydrogen and Oxygen Multi-Generation Combined Cycle Based on the Sabalan Geothermal Wells [Volume 53, Issue 1, 2021, Pages 135-154]
  • Sandwich Shell Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Satellite Antenna CubeSat antenna vibration control using piezoelectric bender considering system requirements [Volume 53, Issue 4, 2021, Pages 2217-2238]
  • Saturation bound Nonlinear optimal control of an active transfemoral prosthesis using state dependent Riccati equation approach [Volume 53, Issue 4, 2021, Pages 2117-2136]
  • Saturation constraint Unstable Aircraft Flight Control Based on Linear Matrix Inequality with Consideration of Control and Saturation Constraints [Volume 53, Issue 2, 2021, Pages 979-992]
  • Savonius Experimental study on effective parameters on vertical axis wind turbine performance [Volume 53, Issue 5, 2021, Pages 2771-2790]
  • Scalar damage Reliability analysis of rectangular plate under in-plane tensile loading using continuum damage mechanics theory [Volume 53, Issue 6, 2021, Pages 3645-3656]
  • Scanning thermal microscope Global sensitivity analysis of nanomachining parameters by using dynamic scanning thermal microscope [Volume 53, Issue 4, 2021, Pages 2367-2384]
  • Schönflies motion Kinematic and dynamic performance evaluation of a four degrees of freedom parallel robot [Volume 53, Issue 4, 2021, Pages 2055-2072]
  • Scoliosis Three-dimensional surface capture from the back anatomy to quantify three-dimensional vertebral column curvatures without using anatomical markers [Volume 53, Issue 4 (Special Issue), 2021, Pages 2629-2638]
  • Scour Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Seat suspension system Modeling, design and investigation of seat suspension based on negative stiffness structure to improve the vibration environment for helicopter pilots [Volume 53, Issue 4 (Special Issue), 2021, Pages 2513-2538]
  • Second-order reliability method Reliability analysis of rectangular plate under in-plane tensile loading using continuum damage mechanics theory [Volume 53, Issue 6, 2021, Pages 3645-3656]
  • Second-throat Diffuser Numerical Analysis of Cross Section Time Variation Effects of the Supersonic Exhaust Diffuser [Volume 53, Issue 3, 2021, Pages 1469-1486]
  • Sedimentation Studying Wind Effect on the Hydrodynamic Behavior of Lock-Exchange Density Current [Volume 53, Issue 9, 2021, Pages 4807-4826]
  • Self-driving car A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Self-expandable stent Finite element modeling of shape memory alloy stent insertion in the vessel with consideration of vessel damage [Volume 53, Issue 2 (Special Issue), 2021, Pages 1211-1222]
  • Semi-circular bend Experimental and theoretical investigation of the critical load of U-notched laminated composite specimens under in-plane shear loading [Volume 53, Issue 6, 2021, Pages 3673-3688]
  • Semi-solar greenhouse Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Sensitivity Fabrication and testing of re-entrant auxetic samples and sensor: Numerically and experimentally [Volume 53, Issue 6 (Special Issue), 2021, Pages 3987-4008]
  • Sensitivity analysis Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]
  • Sensitivity analysis Instability and frequency sensitivity analysis of single-walled carbon nanotubes conveying fluid under thermomagnetic field considering the surface effect [Volume 53, Issue 6 (Special Issue), 2021, Pages 3875-3890]
  • Sensitivity analysis Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2021, Pages 5851-5866]
  • Sensor Condition monitoring of defective single lap adhesive joint using carbon nanotubes [Volume 53, Issue 2 (Special Issue), 2021, Pages 1321-1330]
  • Separation Design, Fabrication and Experimental Study of Spiral Microchannel Particle Separator on Centrifugal Microfluidic Platforms [Volume 53, Issue 3, 2021, Pages 1359-1372]
  • Separation of variable method Analytical Solution of Heat Transfer in a Cone Made of Functionally Graded Material [Volume 53, Issue 1 (Special Issue), 2021, Pages 539-552]
  • Sequential method Real Time Solution for Inverse Heat Conduction Problem in One-Dimensional Plate Utilizing Fuzzy- Proportional–Integral–Derivative Controller [Volume 53, Issue 1, 2021, Pages 303-316]
  • Shaped Charge Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Shape Memory Alloy Finite element modeling of shape memory alloy stent insertion in the vessel with consideration of vessel damage [Volume 53, Issue 2 (Special Issue), 2021, Pages 1211-1222]
  • Shear damage Micromechanical Damage Model for Plasticity of ‎Metals to Predict Failure under Shear Loads [Volume 53, Issue 12, 2021, Pages 5679-5702]
  • Shear deformation theory 2-Dimensional Electroelastic Analysis of Piezoelectric Cylinders Using First-Order Shear Deformation and First-Order Electric Potential Theories [Volume 53, Issue 2, 2021, Pages 815-832]
  • Shear layer thickness Numerical simulation of Holmboe waves in intrusive gravity current using LES method [Volume 53, Issue 7, 2021, Pages 4261-4278]
  • Shear loading Micromechanical Damage Model for Plasticity of ‎Metals to Predict Failure under Shear Loads [Volume 53, Issue 12, 2021, Pages 5679-5702]
  • Shearography Non-destructive evaluation of internal cracks in glass fiber-reinforced polymers using digital shearing interferometry [Volume 53, Issue 6 (Special Issue), 2021, Pages 4063-4078]
  • Shear thickening fluid A Study on the Ballistic Behavior of Kevlar Fabric Impregnated with Shear Thickening Fluid Containing Graphene Oxide Additive [Volume 53, Issue 12, 2021, Pages 5725-5738]
  • Sheet resistance Vertical growth of titanium dioxide nanorods on nebulizer fluorine doped tin oxide deposited on silicon microarrays [Volume 53, Issue 6 (Special Issue), 2021, Pages 4051-4062]
  • Short-term storage Assessing short-term storage effects on hydrostatic wind turbine in presence of turbulent wind [Volume 53, Issue 6, 2021, Pages 3431-3444]
  • Short-time Fourier transform Effects of air injection at rotor blade row tip region of an axial compressor on its performance under inlet distortion conditions [Volume 53, Issue 3 (Special Issue), 2021, Pages 1729-1744]
  • Silicon heat sink Numerical Simulation of Magnetic Field Effect on Thermal and Thermo-Hydraulic Performance and Entropy Generation of a Silicon Microchannel Heat Sink Under Uniform Heat Flux [Volume 53, Issue 1 (Special Issue), 2021, Pages 517-538]
  • Simulation Simulation of a Photocatalytic Reactor Using Finite Volume and Discrete Ordinate Method: A Parametric Study [Volume 53, Issue 1 (Special Issue), 2021, Pages 573-588]
  • Simulation Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Single-layered plates Investigation of penetration behavior of monolithic and multi-layered metallic targets subjected to a projectile impact [Volume 53, Issue 4, 2021, Pages 2309-2330]
  • Single-phase approach Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Single Volume Modeling Investigation of Thermo-Hydraulic Parameters of Reactor Containment due to Cold-Leg Break Accident [Volume 53, Issue 3, 2021, Pages 1591-1606]
  • Single-walled carbon nanotube Instability and frequency sensitivity analysis of single-walled carbon nanotubes conveying fluid under thermomagnetic field considering the surface effect [Volume 53, Issue 6 (Special Issue), 2021, Pages 3875-3890]
  • Sinusoidal pulsed jets Study of the Flow and Heat Transfer of Pulsed Sinusoidal Impinging Jet at Distances Close To the Concave Surface [Volume 53, Issue 9, 2021, Pages 4943-4960]
  • Size effect Spherical Lame-Type Problem in Second Strain Gradient Theory [Volume 53, Issue 2, 2021, Pages 709-728]
  • Skew plates Free vibration analysis of functionally graded carbon nanotubes reinforced composite skew folded plates using the isogeometric approach [Volume 53, Issue 4, 2021, Pages 2239-2260]
  • Sloshing Experimental and numerical study of energy harvesting from sloshing of a liquid and its performance on shaper machine [Volume 53, Issue 6 (Special Issue), 2021, Pages 3911-3924]
  • Smart structures Experimental and Numerical Looseness Detection and Assessment in Flanged Joints Using Vibro-Acoustic Modulation Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1331-1344]
  • Smoke extraction system Numerical simulation simultaneous use of longitudinal ventilation and smoke extraction from the ceiling in fires inside tunnels [Volume 53, Issue 7, 2021, Pages 4411-4428]
  • SMP Evaluating the effects of material extrusion 3D printing process parameters on shape-shifting of Poly-lactic acid 4D-printed structures [Volume 53, Issue 6 (Special Issue), 2021, Pages 4095-4110]
  • Snap-through Stability analysis and snap-through evaluation of the cable-driven continuum robots [Volume 53, Issue 4, 2021, Pages 2089-2104]
  • Social robot Path Design and Control of a Moving Social Robot in an Environment with Moving Obstacles in Order to Reach a Moving Target through Fuzzy Control [Volume 53, Issue 2, 2021, Pages 993-1014]
  • Soft Actuator Study of the Motion Behavior of Soft Fiber Reinforced Actuators Based on Fiber Angle [Volume 53, Issue 8, 2021, Pages 4565-4580]
  • Soft fiber-reinforced actuator Study of the Motion Behavior of Soft Fiber Reinforced Actuators Based on Fiber Angle [Volume 53, Issue 8, 2021, Pages 4565-4580]
  • Soft pneumatic actuator Kinematic Modeling of a Spatial Soft Robot by an Improved Analytical Method Based on Serial Robots [Volume 53, Issue 2 (Special Issue), 2021, Pages 1065-1080]
  • Soft Robot Study of the Motion Behavior of Soft Fiber Reinforced Actuators Based on Fiber Angle [Volume 53, Issue 8, 2021, Pages 4565-4580]
  • Soil temperature distribution Comparison of axial and radial soil temperature distribution in U-tube and coaxial borehole heat exchangers [Volume 53, Issue 7, 2021, Pages 4361-4378]
  • Solar air heater Experimental investigation of heat transfer and pressure drop in perforated ribs in the solar air heater channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1981-2000]
  • Solar collector The Feasibility Study of a Night Sky Radiative Cooling System for Cooling the Intake Air of a Gas Turbine [Volume 53, Issue 1, 2021, Pages 155-172]
  • Solar collector Theoretical comparison of thermal and electrical performance of different models of sheet and tube type solar photovoltaic - thermal water collector [Volume 53, Issue 5, 2021, Pages 2903-2920]
  • Solar Energy Dynamic Simulation of Desiccant Cooling System with Simultaneously Using Solar and Ground Renewable Energies in Hot-Humid Regions [Volume 53, Issue 3, 2021, Pages 1549-1572]
  • Solar Energy Numerical simulation of salt gradient solar pond by employing the solar radiation estimating function considering wall-shading effects [Volume 53, Issue 5 (Special Issue), 2021, Pages 3385-3400]
  • Solar pond Numerical simulation of salt gradient solar pond by employing the solar radiation estimating function considering wall-shading effects [Volume 53, Issue 5 (Special Issue), 2021, Pages 3385-3400]
  • Solar radiation Numerical simulation of salt gradient solar pond by employing the solar radiation estimating function considering wall-shading effects [Volume 53, Issue 5 (Special Issue), 2021, Pages 3385-3400]
  • Solar wall Thermal Analysis of a Solar Wall Equipped with Photovoltaic Cells and Phase-Change Materials [Volume 53, Issue 1, 2021, Pages 173-190]
  • Solid oxide fuel cell Thermodynamic Analysis of Power Generation System Based on Solid Oxide Fuel Cell With External Reforming [Volume 53, Issue 1 (Special Issue), 2021, Pages 605-622]
  • Solid tumors Image-based numerical model for drug delivery to solid tumors [Volume 53, Issue 5 (Special Issue), 2021, Pages 3187-3200]
  • Sound Transmission Loss Sound Transmission Loss of Truncated Conical Shells with Porous Materials [Volume 53, Issue 2, 2021, Pages 923-942]
  • Spark-ignition engine Investigation of the response of a multi-zone simulation code equipped with blow-by sub-model in a dual fuel spark-ignition engine [Volume 53, Issue 5, 2021, Pages 3035-3056]
  • Species Experimental Investigation of Combustion Species Radiation to Evaluate Equivalence Ratio in a Surface Flame Burner [Volume 53, Issue 1, 2021, Pages 41-52]
  • Specific energy consumption Performance investigation of freezing desalination coupled with carbon dioxide refrigeration system [Volume 53, Issue 5 (Special Issue), 2021, Pages 3351-3366]
  • Spinning ring On the deviation from cyclic symmetry in a spinning ring under moving electromagnetic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 3891-3910]
  • Spiral microchannel Design, Fabrication and Experimental Study of Spiral Microchannel Particle Separator on Centrifugal Microfluidic Platforms [Volume 53, Issue 3, 2021, Pages 1359-1372]
  • Spray modeling Numerical investigation of ethanol and acetone spray injection into gaseous environment [Volume 53, Issue 5 (Special Issue), 2021, Pages 3213-3226]
  • Spray pyrolysis Vertical growth of titanium dioxide nanorods on nebulizer fluorine doped tin oxide deposited on silicon microarrays [Volume 53, Issue 6 (Special Issue), 2021, Pages 4051-4062]
  • Squealer Experimental and Numerical Investigation of Film Cooling Effectiveness on Squealer Tip of a Turbine Blade [Volume 53, Issue 3, 2021, Pages 1521-1536]
  • Staircase Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Stall cell speed A Theory for Predicting Stall Cell Transient Behavior [Volume 53, Issue 9, 2021, Pages 4773-4788]
  • Standard high-rise structure Passive Control of Vibrations of High-Rise Structure Using Tuned Liquid Damper under Wind and Earthquake Excitations [Volume 53, Issue 11, 2021, Pages 5367-5388]
  • Standard linear solid Semi-Analytical Study of Fluid-Induced Nonlinear Vibrations in Viscoelastic Beams with Standard Linear Solid Model Using Multiple Time Scales Method [Volume 53, Issue 10, 2021, Pages 5105-5122]
  • Static analysis Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method [Volume 53, Issue 4, 2021, Pages 2331-2346]
  • Steady laminar flamelet model Comparison study of compartment fire simulation with steady laminar flamelet and eddy dissipation model [Volume 53, Issue 5, 2021, Pages 2953-2966]
  • Stiffness matrix Stability analysis and snap-through evaluation of the cable-driven continuum robots [Volume 53, Issue 4, 2021, Pages 2089-2104]
  • Stirling Engine Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Straight Heat pipe Experimental Investigation on the Thermal Resistance of Straight Heat Pipes with Double-Ended Cooling and Middle-Heating at Different Tilt Angles [Volume 53, Issue 1, 2021, Pages 279-302]
  • Strain Rate Analysis of Forming Limit of Sheet Metals Considering Vertex Localized Necking and Ductile Damage Criterion [Volume 53, Issue 2 (Special Issue), 2021, Pages 1307-1320]
  • Stress corrosion cracking Simulation of Pitting Corrosion on Gas Turbine Compressor Blade [Volume 53, Issue 10, 2021, Pages 5123-5140]
  • Stress-life method Experimental and Numerical Investigation of Fatigue Behavior of Polylactic acid Components Made by Additive Manufacturing Method [Volume 53, Issue 6, 2021, Pages 3703-3716]
  • Stress state Analysis of Forming Limit of Sheet Metals Considering Vertex Localized Necking and Ductile Damage Criterion [Volume 53, Issue 2 (Special Issue), 2021, Pages 1307-1320]
  • Stress state Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Stress-strain partitioning Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Stress triaxiality Numerical Simulation of Elastoplastic Behavior and Damage Evolution at Various Stress Triaxiality [Volume 53, Issue 12, 2021, Pages 5703-5724]
  • String stability Control of heterogeneous traffic flows in presence of pocket loss, time-varying communication delay and actuator lag [Volume 53, Issue 4, 2021, Pages 2155-2170]
  • Stroke Volume Computational Fluid Dynamics Analysis of Effects of Housing Expansion Angle, Stroke Volume and Path Length of the Fiber Bundles on Function of the Artificial Lung [Volume 53, Issue 11, 2021, Pages 5389-5408]
  • Structural health monitoring Experimental and Numerical Looseness Detection and Assessment in Flanged Joints Using Vibro-Acoustic Modulation Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1331-1344]
  • Structural health monitoring Modeling of vibro-acoustic modulation induced by non-linear contact in the Euler-Bernoulli beam using the Fourier spectral element [Volume 53, Issue 6 (Special Issue), 2021, Pages 3809-3824]
  • Structural health monitoring Investigation of Nonlinear Vibrations of A Cantilever Beam with A Transverse Fatigue Crack [Volume 53, Issue 10, 2021, Pages 5069-5084]
  • Subcooled Flow boiling Measurement of subcooled flow boiling heat transfer coefficient in vertical annulus tube [Volume 53, Issue 7, 2021, Pages 4345-4360]
  • Subharmonic resonance Superharmonic and Subharmonic Resonance Analysis of A Rectangular Hyperelastic Membrane Resting on Nonlinear Elastic Foundation Using The Method of Multiple Scales [Volume 53, Issue 8, 2021, Pages 4535-4564]
  • Subsonic airflow Nonlinear Electro-aero-elastic Vibration Analysis of a Nanocomposite Laminated Trapezoidal Actuator [Volume 53, Issue 2 (Special Issue), 2021, Pages 1137-1158]
  • Subsonic flow Experimental investigation of the effect of flapping on the lift and thrust forces of 3D-wing [Volume 53, Issue 3 (Special Issue), 2021, Pages 1697-1708]
  • Successive loading Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 4023-4050]
  • Supersonic Numerical/Experimental Investigation of the Presence of a Protuberance in a Convergent – Divergent Nozzle in Supersonic Regime to Control the Thrust Vector [Volume 53, Issue 9, 2021, Pages 4887-4904]
  • Supersonic flow Using nonlinear energy sink to improve the dynamic behavior of rectangular plate under supersonic aerodynamic flow at different angles [Volume 53, Issue 6, 2021, Pages 3511-3528]
  • Supersonic flow Investigation of Geometric Characteristics on the Non-Reaction Supersonic Flow inside the Channel with the Presence of Cavities [Volume 53, Issue 11, 2021, Pages 5409-5428]
  • Super-twisting algorithm Control of Vehicle’s Mixed Longitudinal and Lateral Stability with Engine Dynamics Using Super Twisting Control Algorithm [Volume 53, Issue 2, 2021, Pages 959-978]
  • Support Vector Machine Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]
  • Surface Data Acquisition Three-dimensional surface capture from the back anatomy to quantify three-dimensional vertebral column curvatures without using anatomical markers [Volume 53, Issue 4 (Special Issue), 2021, Pages 2629-2638]
  • Surface evaporation Steam generation via solar energy and localizing the light on the pinewood surface [Volume 53, Issue 3 (Special Issue), 2021, Pages 2001-2012]
  • Surface pressure spectra Experimental Investigation of the Performance of Trailing Edge Noise-Reducing Finlets [Volume 53, Issue 9, 2021, Pages 4827-4846]
  • Surface roughness Numerical analysis of distinction boundary of surface roughness and wall blocks in laminar pressure-driven flow within the rugged microchannels [Volume 53, Issue 5 (Special Issue), 2021, Pages 3241-3256]
  • Surface roughness Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2021, Pages 5627-5644]
  • Surface roughness Optimization of Additive Manufactured Part Made by Ti6Al4V Alloy to Achieve Best Relative Density and Surface Roughness [Volume 53, Issue 10, 2021, Pages 5169-5184]
  • Surfactant Experimental Study of Surfactant Type Effects on the Foam Stability and Mobility With the Approach of Enhancing Oil Recovery [Volume 53, Issue 1 (Special Issue), 2021, Pages 339-356]
  • Surrogate model Development of parametric and time dependent reduced order model for diffusion and convection-diffusion problems based on proper orthogonal decomposition method [Volume 53, Issue 7, 2021, Pages 4241-4260]
  • Swimming pool Effect of Air Curtain on Occupants Thermal Comfort and Indoor Air Quality in an Athletic Swimming Pool with Spectators’ Stand [Volume 53, Issue 1, 2021, Pages 191-208]
  • Swirl Jet Experimental Study of the Effect of Fluid Jet Swirl on Circular Hydraulic Jump [Volume 53, Issue 7, 2021, Pages 4153-4170]
  • Switching Assessing short-term storage effects on hydrostatic wind turbine in presence of turbulent wind [Volume 53, Issue 6, 2021, Pages 3431-3444]
  • Switching control Stability Analysis of Predictive Control in Networked Control System Using Switching Control [Volume 53, Issue 10, 2021, Pages 5039-5054]
  • Synergistic Influence A study on the synergistic influence of reduced graphene oxide and MWCNTs on the mechanical properties of epoxy nanocomposite [Volume 53, Issue 6 (Special Issue), 2021, Pages 3971-3986]
  • Syngas Investigation of Performance and Emission Characteristic of a Reactivity Controlled Compression Ignition Engine Fueled By a Mixture of Diesel and Syngas Derived From Biomass Gasification [Volume 53, Issue 1, 2021, Pages 17-30]
  • Synthetic Jet Implementation of Continuous Blowing and Synthetic Jet Actuators to Control the Flow Separation over a Fully Stalled Airfoil [Volume 53, Issue 9, 2021, Pages 4847-4864]
  • System Impedance Computational Fluid Dynamics Analysis of Effects of Housing Expansion Angle, Stroke Volume and Path Length of the Fiber Bundles on Function of the Artificial Lung [Volume 53, Issue 11, 2021, Pages 5389-5408]

T

  • Taguchi algorithm Experimental and Numerical Investigation of Fatigue Behavior of Polylactic acid Components Made by Additive Manufacturing Method [Volume 53, Issue 6, 2021, Pages 3703-3716]
  • Tapered beam Lateral Stability Analysis of Thin-Walled Fiber-Metal Laminate Beam with Varying Cross-Section by Considering Nonlinear Strains [Volume 53, Issue 10, 2021, Pages 5239-5268]
  • Targeted drug delivery Experimental study of manufacturing and characterization of a flow-focusing microchannel to produce thermoresponsive microparticles for on-demand smart drug delivery [Volume 53, Issue 5 (Special Issue), 2021, Pages 3257-3274]
  • Task-ambient conditioning systems Effect of Gender and Body Fitness on the Thermal Sensation of Sleeping Occupants Under Task-Ambient Air Conditioning System [Volume 53, Issue 1 (Special Issue), 2021, Pages 453-466]
  • Taylor–Couette Stability analysis of shear-thinning flow in narrow gap Taylor–Couette axial flow [Volume 53, Issue 3 (Special Issue), 2021, Pages 1745-1766]
  • Taylor vortex flow Stability analysis of shear-thinning flow in narrow gap Taylor–Couette axial flow [Volume 53, Issue 3 (Special Issue), 2021, Pages 1745-1766]
  • Tensile Strength Statistical analysis and optimization of tensile strength of Al7075 butt joint produced by friction stir welding and submerged friction stir welding via response surface methodology and desirability approach [Volume 53, Issue 4 (Special Issue), 2021, Pages 2719-2734]
  • Tensile Test Experimental Study of Effects of Hydrogen Embrittlement and Residual Stress on Mechanical Properties of GTD450 [Volume 53, Issue 12, 2021, Pages 5659-5678]
  • Terminal sliding mode Numerical analysis of chaotic dynamics in vehicle along with design of chaos controller using fuzzy fast terminal sliding mode control [Volume 53, Issue 4 (Special Issue), 2021, Pages 2539-2556]
  • Textured surface Transient numerical modeling and experimental investigation of the effect of surface texture on elastohydrodynamic lubrication [Volume 53, Issue 5 (Special Issue), 2021, Pages 3201-3212]
  • Theoretical analysis Comparison of penetration process of 2-layer elastomeric composite with thermoset composite using energy absorption equations [Volume 53, Issue 6, 2021, Pages 3657-3672]
  • The Ritz method Investigating the Influence of Higher-Order Boundary Conditions on Free Vibrations of Bi-Directional Functionally Graded Thick Conical Micro-Shells [Volume 53, Issue 10, 2021, Pages 5085-5104]
  • Thermal Investigation of the effect of welding path on residual stresses and deformations in peripheral welding of steel pipe [Volume 53, Issue 4 (Special Issue), 2021, Pages 2735-2750]
  • Thermal analysis Thermal Analysis of a Solar Wall Equipped with Photovoltaic Cells and Phase-Change Materials [Volume 53, Issue 1, 2021, Pages 173-190]
  • Thermal and radiation efficiency Experimental Study of Injecting Water Vapor and Oil Compounds by Nebulizer on the Efficiency and Natural Gas Flame Pollution [Volume 53, Issue 1, 2021, Pages 31-40]
  • Thermal barrier coating Thermal stress analysis for an aluminum die cast die [Volume 53, Issue 4 (Special Issue), 2021, Pages 2687-2702]
  • Thermal comfort Effect of Air Curtain on Occupants Thermal Comfort and Indoor Air Quality in an Athletic Swimming Pool with Spectators’ Stand [Volume 53, Issue 1, 2021, Pages 191-208]
  • Thermal comfort Experimental Investigation of the Effects of Inlet Cooling Air Temperature on the Occupants’ Local Thermal Sensation in the Under-Floor Air Distribution System [Volume 53, Issue 3, 2021, Pages 1537-1548]
  • Thermal Detector Increasing the Sensitivity of SiO2/Al Micro Cantilever Infrared Detector Based on Micro Electromechanical Systems Technology by Optimizing of Dimensions [Volume 53, Issue 8, 2021, Pages 4717-4728]
  • Thermal efficiency Theoretical comparison of thermal and electrical performance of different models of sheet and tube type solar photovoltaic - thermal water collector [Volume 53, Issue 5, 2021, Pages 2903-2920]
  • Thermal efficiency Experimental study on the enhancement of the thermal efficiency of a household gas water heater [Volume 53, Issue 3 (Special Issue), 2021, Pages 2013-2030]
  • Thermal entropy Numerical Simulation of Magnetic Field Effect on Thermal and Thermo-Hydraulic Performance and Entropy Generation of a Silicon Microchannel Heat Sink Under Uniform Heat Flux [Volume 53, Issue 1 (Special Issue), 2021, Pages 517-538]
  • Thermal resistance Experimental Investigation on the Thermal Resistance of Straight Heat Pipes with Double-Ended Cooling and Middle-Heating at Different Tilt Angles [Volume 53, Issue 1, 2021, Pages 279-302]
  • Thermal resistance Experimental Investigation of Thermal Performance of Pulsating Heat Pipe at Angles Close To the Horizon [Volume 53, Issue 11, 2021, Pages 5445-5460]
  • Thermal Stress Thermal Stress Analysis of the Carbon Nanotube Reinforced Composite Cylindrical Shells [Volume 53, Issue 10, 2021, Pages 5269-5292]
  • Thermal stresses Thermal stress analysis for an aluminum die cast die [Volume 53, Issue 4 (Special Issue), 2021, Pages 2687-2702]
  • Thermal Vibration Global sensitivity analysis of nanomachining parameters by using dynamic scanning thermal microscope [Volume 53, Issue 4, 2021, Pages 2367-2384]
  • Thermodynamic Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Thermodynamic analysis Thermodynamic Analysis of a Novel Power, Cooling, Hydrogen and Oxygen Multi-Generation Combined Cycle Based on the Sabalan Geothermal Wells [Volume 53, Issue 1, 2021, Pages 135-154]
  • Thermodynamic analysis Thermodynamic Analysis of Power Generation System Based on Solid Oxide Fuel Cell With External Reforming [Volume 53, Issue 1 (Special Issue), 2021, Pages 605-622]
  • Thermodynamic analysis Thermodynamic analysis and comparison of two new tri-generation (hydrogen, power, heating) systems using geothermal energy [Volume 53, Issue 5, 2021, Pages 2983-3002]
  • Thermodynamic analysis Energy Analysis and Exergy of the System of Simultaneous Production of Power and Hydrogen with the Excitatory Gasification of Municipal Solid Waste [Volume 53, Issue 11, 2021, Pages 5529-5550]
  • Thermoelastic damping Investigation of Quality Factor for Linear Vibrations of Rectangular Micro-plates with Thermoelastic Damping [Volume 53, Issue 2, 2021, Pages 851-862]
  • Thermohydraulic Investigation of Thermo-Hydraulic Parameters of Reactor Containment due to Cold-Leg Break Accident [Volume 53, Issue 3, 2021, Pages 1591-1606]
  • Thermo-hydraulic performance Numerical Simulation of Magnetic Field Effect on Thermal and Thermo-Hydraulic Performance and Entropy Generation of a Silicon Microchannel Heat Sink Under Uniform Heat Flux [Volume 53, Issue 1 (Special Issue), 2021, Pages 517-538]
  • Thermomagnetic Field Instability and frequency sensitivity analysis of single-walled carbon nanotubes conveying fluid under thermomagnetic field considering the surface effect [Volume 53, Issue 6 (Special Issue), 2021, Pages 3875-3890]
  • Thermoresponsive microparticles Experimental study of manufacturing and characterization of a flow-focusing microchannel to produce thermoresponsive microparticles for on-demand smart drug delivery [Volume 53, Issue 5 (Special Issue), 2021, Pages 3257-3274]
  • Thick cylinder 2-Dimensional Electroelastic Analysis of Piezoelectric Cylinders Using First-Order Shear Deformation and First-Order Electric Potential Theories [Volume 53, Issue 2, 2021, Pages 815-832]
  • Thickness distribution Experimental and numerical investigation of the plastic deformation of metallic bipolar plates with serpentine flow filed [Volume 53, Issue 6, 2021, Pages 3717-3732]
  • Thin-walled section Lateral Stability Analysis of Thin-Walled Fiber-Metal Laminate Beam with Varying Cross-Section by Considering Nonlinear Strains [Volume 53, Issue 10, 2021, Pages 5239-5268]
  • Thread milling Experimental investigation of the infeed method and machining parameters on the tool wear during thread milling [Volume 53, Issue 2 (Special Issue), 2021, Pages 1345-1356]
  • Three-legged robot Double Hyperbolic Sliding Mode Control Based on Unscented Kalman Filter for Three-legged Mobile manipulator [Volume 53, Issue 4, 2021, Pages 2105-2116]
  • Through-thickness stress Crystal Plasticity Finite Element Study of Necking Behavior of Aluminum Alloy Sheet Subject to Thickness-Stress [Volume 53, Issue 12, 2021, Pages 5755-5768]
  • Thrust vector Numerical/Experimental Investigation of the Presence of a Protuberance in a Convergent – Divergent Nozzle in Supersonic Regime to Control the Thrust Vector [Volume 53, Issue 9, 2021, Pages 4887-4904]
  • Time Delay Control of the Amount of Oncolytic Virus Injection by Considering Time Delay [Volume 53, Issue 2 (Special Issue), 2021, Pages 1125-1136]
  • Time Delay Control of heterogeneous traffic flows in presence of pocket loss, time-varying communication delay and actuator lag [Volume 53, Issue 4, 2021, Pages 2155-2170]
  • Time Delay Stability Analysis of Predictive Control in Networked Control System Using Switching Control [Volume 53, Issue 10, 2021, Pages 5039-5054]
  • Time delay estimation Active Fault Tolerant Control of Wind Turbine Systems using Disturbance Observer-based Sliding Mode and Time Delay Estimation [Volume 53, Issue 8, 2021, Pages 4517-4534]
  • Time-variant control target Path Design and Control of a Moving Social Robot in an Environment with Moving Obstacles in Order to Reach a Moving Target through Fuzzy Control [Volume 53, Issue 2, 2021, Pages 993-1014]
  • Tip injection Effects of air injection at rotor blade row tip region of an axial compressor on its performance under inlet distortion conditions [Volume 53, Issue 3 (Special Issue), 2021, Pages 1729-1744]
  • Tip speed ratio Development of Blade Element Momentum Theory for Unsteady Flow with Regard to the Dynamic Stall Phenomenon [Volume 53, Issue 3, 2021, Pages 1439-1456]
  • Tire dissipation Investigation of vehicle energy demand considering the modified tire power loss [Volume 53, Issue 6, 2021, Pages 3615-3628]
  • Tire slip Investigation of vehicle energy demand considering the modified tire power loss [Volume 53, Issue 6, 2021, Pages 3615-3628]
  • Titanium dioxide nanorods Vertical growth of titanium dioxide nanorods on nebulizer fluorine doped tin oxide deposited on silicon microarrays [Volume 53, Issue 6 (Special Issue), 2021, Pages 4051-4062]
  • Torsion problem Approximate Torsional Analysis of Arbitrary Trapezoidal Bars by Kantorovich Method [Volume 53, Issue 10, 2021, Pages 5203-5220]
  • Tracking Nonlinear optimal control of an active transfemoral prosthesis using state dependent Riccati equation approach [Volume 53, Issue 4, 2021, Pages 2117-2136]
  • Traditional architecture Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Trailing edge noise Numerical Analysis of Parameters Affecting Turbulent Boundary Layer Trailing-Edge Noise [Volume 53, Issue 1 (Special Issue), 2021, Pages 437-452]
  • Trajectory Rectangular liquid jets injected transversely into subsonic crossflow [Volume 53, Issue 5 (Special Issue), 2021, Pages 3117-3134]
  • Trajectory tracking Modeling and trajectory tracking control of non-holonomic mobile robot with revolute-prismatic joints [Volume 53, Issue 2 (Special Issue), 2021, Pages 1041-1064]
  • Transcritical injection Influence of Pseudo-Boiling Phenomenon and the Mass Flux Ratio on the Dynamics of Transcritical Shear Flame [Volume 53, Issue 9, 2021, Pages 4961-4980]
  • Transcritical Rankine cycle Energy Analysis and Exergy of the System of Simultaneous Production of Power and Hydrogen with the Excitatory Gasification of Municipal Solid Waste [Volume 53, Issue 11, 2021, Pages 5529-5550]
  • Transient Flow Numerical simulation of water hammer in various fluids due to a fast valve closure [Volume 53, Issue 7, 2021, Pages 4171-4188]
  • Translaminar fracture toughness Experimental and theoretical investigation of the critical load of U-notched laminated composite specimens under in-plane shear loading [Volume 53, Issue 6, 2021, Pages 3673-3688]
  • Transmissibility Experimental verification of indirect bridge mode shape identification using transmissibility of a passing vehicle [Volume 53, Issue 6, 2021, Pages 3529-2548]
  • Transonic Compressor Circumferential Casing Treatment in a Transonic Fan [Volume 53, Issue 7, 2021, Pages 4189-4202]
  • Trapezoidal actuator Nonlinear Electro-aero-elastic Vibration Analysis of a Nanocomposite Laminated Trapezoidal Actuator [Volume 53, Issue 2 (Special Issue), 2021, Pages 1137-1158]
  • Trapezoidal fin Hydrothermal performance of trapezoidal fin equipped with vortex generator and hole: Investigation of the effect of vortex generator and hole position [Volume 53, Issue 3 (Special Issue), 2021, Pages 1963-1980]
  • Traumatic brain injuries Fluid-Structure Interactions Analysis of Tension in An Axon Using Finite Elements Modeling to Investigate Strain Related Neurological Damages [Volume 53, Issue 8, 2021, Pages 4609-4632]
  • Triangular bluff body Experimental Investigation on Flow Downstream of a Triangular Bluff Body at Different Angles [Volume 53, Issue 1 (Special Issue), 2021, Pages 427-436]
  • Triangular cavity Numerical Study of Natural Convection Heat Transfer inside a Triangular Cavity with Flexible Sidewalls Containing a Cylindrical Heat Source [Volume 53, Issue 11, 2021, Pages 5461-5484]
  • Tri-generation systems Thermodynamic analysis and comparison of two new tri-generation (hydrogen, power, heating) systems using geothermal energy [Volume 53, Issue 5, 2021, Pages 2983-3002]
  • Truncated conical shell Sound Transmission Loss of Truncated Conical Shells with Porous Materials [Volume 53, Issue 2, 2021, Pages 923-942]
  • T-shape microchannel Numerical simulation of droplet formation in a T-shape microchannel using two-phase level-set method [Volume 53, Issue 3 (Special Issue), 2021, Pages 1815-1838]
  • Tuned Liquid Damper Passive Control of Vibrations of High-Rise Structure Using Tuned Liquid Damper under Wind and Earthquake Excitations [Volume 53, Issue 11, 2021, Pages 5367-5388]
  • Tunnel Numerical simulation simultaneous use of longitudinal ventilation and smoke extraction from the ceiling in fires inside tunnels [Volume 53, Issue 7, 2021, Pages 4411-4428]
  • Turbidity current Studying Wind Effect on the Hydrodynamic Behavior of Lock-Exchange Density Current [Volume 53, Issue 9, 2021, Pages 4807-4826]
  • Turbulence Index Diagnostical and observational analysis of clear air turbulence over the middle east and Iran [Volume 53, Issue 7, 2021, Pages 4203-4220]
  • Turbulence intensity Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Turbulence intensity Experimental Investigation on Flow Downstream of a Triangular Bluff Body at Different Angles [Volume 53, Issue 1 (Special Issue), 2021, Pages 427-436]
  • Turbulent boundary layer Experimental Investigation of the Performance of Trailing Edge Noise-Reducing Finlets [Volume 53, Issue 9, 2021, Pages 4827-4846]
  • Turbulent flow Numerical Simulation of Heat Transfer Turbulent Flow for Non-Newtonian Nanofluid in a Double Pipe Helical Heat Exchanger [Volume 53, Issue 1, 2021, Pages 221-240]
  • Turbulent flow Numerical Analysis of Parameters Affecting Turbulent Boundary Layer Trailing-Edge Noise [Volume 53, Issue 1 (Special Issue), 2021, Pages 437-452]
  • Turbulent phenomena Studying Wind Effect on the Hydrodynamic Behavior of Lock-Exchange Density Current [Volume 53, Issue 9, 2021, Pages 4807-4826]
  • Two coaxial cylinders Numerical simulation of mixed convection of Bingham fluid between two coaxial cylinders [Volume 53, Issue 5 (Special Issue), 2021, Pages 3417-3428]
  • Two-fluid flow Investigation on flow air concentration effect on distance of the chute spillway aerators [Volume 53, Issue 5 (Special Issue), 2021, Pages 3135-3150]
  • Two phase Investigation of Thermo-Hydraulic Parameters of Reactor Containment due to Cold-Leg Break Accident [Volume 53, Issue 3, 2021, Pages 1591-1606]
  • Two phase flow Analysis of Density Wave Oscillations in a Boiling Channel by a New Analytical Model [Volume 53, Issue 3, 2021, Pages 1505-1520]
  • Two-phase mixture model Numerical simulation of nanofluid flow in an annulus with porous baffles based on combination of Darcy-Brinkman-Forchheimer model and two-phase mixture model [Volume 53, Issue 3 (Special Issue), 2021, Pages 1897-1914]

U

  • Ultra-high molecular weight polyethylene Experimental Studies on The Tribology Behavior of Ultra-High Molecular Weight Polyethylene /Zeolite Nanocomposite [Volume 53, Issue 10, 2021, Pages 5159-5168]
  • Ultraviolet reactor The Effect of Inner Walls Reflection on Microorganisms Inactivation in Water Ultraviolet Reactor using computational fluid dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 375-392]
  • Unavoidable exergy destruction Advanced exergy and thermoeconomic analysis of the supercritical carbon dioxide recompression cycle: A comparative study [Volume 53, Issue 5, 2021, Pages 2967-2982]
  • Uncertainty Fault detection and isolation based on robust Kalman filter for discrete-time systems with stochastic and norm-bounded uncertainties [Volume 53, Issue 6 (Special Issue), 2021, Pages 3825-3840]
  • Uncertainty Sensitivity Analysis of Rotor Dynamic Behavior to Manufacturing Tolerances Based on Global Sensitivity Analysis and Statistical Methods [Volume 53, Issue 8, 2021, Pages 4501-4516]
  • Uncooled Infrared Detector Increasing the Sensitivity of SiO2/Al Micro Cantilever Infrared Detector Based on Micro Electromechanical Systems Technology by Optimizing of Dimensions [Volume 53, Issue 8, 2021, Pages 4717-4728]
  • Under-floor air distribution system Experimental Investigation of the Effects of Inlet Cooling Air Temperature on the Occupants’ Local Thermal Sensation in the Under-Floor Air Distribution System [Volume 53, Issue 3, 2021, Pages 1537-1548]
  • Underfloor air distribution system Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Uniaxial tensile test Crystal Plasticity Finite Element Study of Necking Behavior of Aluminum Alloy Sheet Subject to Thickness-Stress [Volume 53, Issue 12, 2021, Pages 5755-5768]
  • Unified humidifier Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • U-notch Experimental and theoretical investigation of the critical load of U-notched laminated composite specimens under in-plane shear loading [Volume 53, Issue 6, 2021, Pages 3673-3688]
  • Unscented Kalman Filter Double Hyperbolic Sliding Mode Control Based on Unscented Kalman Filter for Three-legged Mobile manipulator [Volume 53, Issue 4, 2021, Pages 2105-2116]
  • Unsteady flow Development of Blade Element Momentum Theory for Unsteady Flow with Regard to the Dynamic Stall Phenomenon [Volume 53, Issue 3, 2021, Pages 1439-1456]
  • Unsteady flow The Effect of Non-Newtonian Behavior on the Transport of Low Density Lipoprotein Particles in the Vortex Region in the Human Carotid Artery [Volume 53, Issue 9, 2021, Pages 4789-4806]
  • Upper-bound theorem Theoretical Analysis of Equal Channel Angular Pressing Process by Upper Bound Method and Its Experimental Investigation in Condition of Circular Cross-Section Channel [Volume 53, Issue 8, 2021, Pages 4729-4744]
  • Utilization factor Effect of Start of Injection Timing on Waste Heat Recovery Capacity in a Reactivity Controlled Compression Ignition Engine [Volume 53, Issue 1, 2021, Pages 3-16]
  • U-tube heat exchanger Comparison of axial and radial soil temperature distribution in U-tube and coaxial borehole heat exchangers [Volume 53, Issue 7, 2021, Pages 4361-4378]

V

  • Variable conductance heat pipe Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Variable distance electrodes Variable distance interdigitated electrodes design to improve the performance of cantilever piezoelectric thin films nanogenerators [Volume 53, Issue 4, 2021, Pages 2347-2366]
  • Variable structure filter Modified Variable Structure Estimation and Control for Constrained Landing on Mars [Volume 53, Issue 10, 2021, Pages 5055-5068]
  • Vehicle Investigation of vehicle energy demand considering the modified tire power loss [Volume 53, Issue 6, 2021, Pages 3615-3628]
  • Vehicle chassis control Combination of active braking and semi-active suspension systems to improve the roll and yaw vehicle stability [Volume 53, Issue 6, 2021, Pages 3549-3570]
  • Vehicle data logger module Analyzing driving behavior based on vehicle information logging using MPU6050 [Volume 53, Issue 6 (Special Issue), 2021, Pages 3855-3874]
  • Vehicle stability Control of Vehicle’s Mixed Longitudinal and Lateral Stability with Engine Dynamics Using Super Twisting Control Algorithm [Volume 53, Issue 2, 2021, Pages 959-978]
  • Venturi Experimental Investigation of Water Level Control System of Liquid-Gas Separator in the Fuel Cell [Volume 53, Issue 1 (Special Issue), 2021, Pages 589-604]
  • Vertebral Curvatures Three-dimensional surface capture from the back anatomy to quantify three-dimensional vertebral column curvatures without using anatomical markers [Volume 53, Issue 4 (Special Issue), 2021, Pages 2629-2638]
  • Vertex theory Analysis of Forming Limit of Sheet Metals Considering Vertex Localized Necking and Ductile Damage Criterion [Volume 53, Issue 2 (Special Issue), 2021, Pages 1307-1320]
  • Vertical air temperature difference discomfort Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Vertical Axis Wind Turbine Power Improvement of a Commercial Large Scale Vertical-Axis Wind Turbine Using Plasma Actuators [Volume 53, Issue 3, 2021, Pages 1487-1504]
  • Vertical Axis Wind Turbine Experimental study on effective parameters on vertical axis wind turbine performance [Volume 53, Issue 5, 2021, Pages 2771-2790]
  • Vertical tube Measurement of subcooled flow boiling heat transfer coefficient in vertical annulus tube [Volume 53, Issue 7, 2021, Pages 4345-4360]
  • Vibration Numerical Simulation of Liner Vibrations in a Laboratory Combustion Chamber [Volume 53, Issue 2, 2021, Pages 881-896]
  • Vibration Finite Element Modeling of a Novel Magnetic Shape Memory Alloy Based Energy Harvester Using a Corrugated Beam and Investigating the Effective Parameters [Volume 53, Issue 2, 2021, Pages 799-814]
  • Vibration analysis Prognostics of rolling element bearings using shock pulse method and vibration method records and employing feedforward neural-network [Volume 53, Issue 4 (Special Issue), 2021, Pages 2557-2576]
  • Vibration coupling Employing of shunt damping method to reduce edgewise vibration of small size wind turbine blade with considering the effect of vibration coupling [Volume 53, Issue 4, 2021, Pages 2073-2088]
  • Vibration frequency Free vibration and flexural-torsional stability analyses of axially functionally graded tapered thin-walled beam resting on elastic foundation [Volume 53, Issue 6, 2021, Pages 3587-3614]
  • Vibration Signal Identification and damage detection of beam-like structure using vibration signals based on simulated model, real healthy state and deep convolutional neural network [Volume 53, Issue 4, 2021, Pages 2193-2216]
  • Vibration Signals Denoising Denoising vibration signals of rotating machines using probability density function, similarity measure and improved thresholding function [Volume 53, Issue 4 (Special Issue), 2021, Pages 2493-2512]
  • Vibro-Acoustic Modulation Experimental and Numerical Looseness Detection and Assessment in Flanged Joints Using Vibro-Acoustic Modulation Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1331-1344]
  • Viral therapy Control of the Amount of Oncolytic Virus Injection by Considering Time Delay [Volume 53, Issue 2 (Special Issue), 2021, Pages 1125-1136]
  • Virtual power Stability analysis and snap-through evaluation of the cable-driven continuum robots [Volume 53, Issue 4, 2021, Pages 2089-2104]
  • Viscous fingering Quantifying of viscous fingering instability in porous media [Volume 53, Issue 5, 2021, Pages 2887-2902]
  • Visual Guidance A Fast Warehouse Inventory Micro Aerial Vehicle System Equipped with Visual Guidance and Navigation Algorithm [Volume 53, Issue 12, 2021, Pages 5785-5808]
  • Volume of Fluid Method Studying Wind Effect on the Hydrodynamic Behavior of Lock-Exchange Density Current [Volume 53, Issue 9, 2021, Pages 4807-4826]
  • Volume of Fluid Method Experimental and numerical study of energy harvesting from sloshing of a liquid and its performance on shaper machine [Volume 53, Issue 6 (Special Issue), 2021, Pages 3911-3924]
  • Vortex flowmeter Experimental Investigation on Flow Downstream of a Triangular Bluff Body at Different Angles [Volume 53, Issue 1 (Special Issue), 2021, Pages 427-436]
  • Vortex generator The effect of hole on the rectangular vortex generator on thermal-hydrodynamic performance of the minichannel [Volume 53, Issue 7, 2021, Pages 4293-4308]
  • Vortex generator position Hydrothermal performance of trapezoidal fin equipped with vortex generator and hole: Investigation of the effect of vortex generator and hole position [Volume 53, Issue 3 (Special Issue), 2021, Pages 1963-1980]
  • Vorticity Investigation of the effect of free-wind velocity on the performance of small-scale vertical axis wind turbine [Volume 53, Issue 3 (Special Issue), 2021, Pages 1709-1728]
  • Vorticity flux Numerical Analysis of Secondary Flow Strength Induced by Electrohydrodynamic Actuator Through a Smooth Channel [Volume 53, Issue 3, 2021, Pages 1401-1416]

W

  • Wagner unsteady model Modeling and Flutter Analysis of a Three Dimensional Box-Wing using Wagner Unsteady Aerodynamic Model [Volume 53, Issue 12, 2021, Pages 5809-5830]
  • Wall’s surface ruggedness Numerical analysis of distinction boundary of surface roughness and wall blocks in laminar pressure-driven flow within the rugged microchannels [Volume 53, Issue 5 (Special Issue), 2021, Pages 3241-3256]
  • Warehouse Robot A Fast Warehouse Inventory Micro Aerial Vehicle System Equipped with Visual Guidance and Navigation Algorithm [Volume 53, Issue 12, 2021, Pages 5785-5808]
  • Warping function Approximate Torsional Analysis of Arbitrary Trapezoidal Bars by Kantorovich Method [Volume 53, Issue 10, 2021, Pages 5203-5220]
  • Waste heat Design and evaluation of a novel bi-evaporator combined power and refrigeration cycle working with various zeotropic mixtures [Volume 53, Issue 5, 2021, Pages 3003-3022]
  • Waste heat recovery Effect of Start of Injection Timing on Waste Heat Recovery Capacity in a Reactivity Controlled Compression Ignition Engine [Volume 53, Issue 1, 2021, Pages 3-16]
  • Waste heat recovery Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat [Volume 53, Issue 9, 2021, Pages 4999-5016]
  • Water accumulation Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Water addition Investigation on Effects of Water Addition on Performance and Emissions of an n-heptane Fueled Homogeneous Charge Compression Ignition Engine [Volume 53, Issue 3, 2021, Pages 1637-1652]
  • Water level control Experimental Investigation of Water Level Control System of Liquid-Gas Separator in the Fuel Cell [Volume 53, Issue 1 (Special Issue), 2021, Pages 589-604]
  • Water management Simulation, manufacturing and test of a transparent proton-exchange membrane fuel cell [Volume 53, Issue 3 (Special Issue), 2021, Pages 2031-2052]
  • Water treatment Removal of Lead Heavy Metal from Wastewater by Crystallization Process and Investigation of the Effective Parameters [Volume 53, Issue 11, 2021, Pages 5349-5366]
  • Weather research and forecasting Wind simulation in a complex terrain by numerical weather prediction method using large eddy simulation [Volume 53, Issue 7, 2021, Pages 4221-4240]
  • Welding Investigation of the effect of welding path on residual stresses and deformations in peripheral welding of steel pipe [Volume 53, Issue 4 (Special Issue), 2021, Pages 2735-2750]
  • Weld Zones Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy [Volume 53, Issue 6, 2021, Pages 3751-3760]
  • Whole body vibration Modeling, design and investigation of seat suspension based on negative stiffness structure to improve the vibration environment for helicopter pilots [Volume 53, Issue 4 (Special Issue), 2021, Pages 2513-2538]
  • Wick porosity Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Wiener processes Fatigue crack growth analysis via Wiener degradation model with random effects [Volume 53, Issue 4, 2021, Pages 2271-2286]
  • Wind Wind simulation in a complex terrain by numerical weather prediction method using large eddy simulation [Volume 53, Issue 7, 2021, Pages 4221-4240]
  • Wind field Control of quadrotor by using state-dependent Riccati equation method and analyzing its dynamic performance under wind field [Volume 53, Issue 4 (Special Issue), 2021, Pages 2423-2438]
  • Wind flow Studying Wind Effect on the Hydrodynamic Behavior of Lock-Exchange Density Current [Volume 53, Issue 9, 2021, Pages 4807-4826]
  • Wind resource assessment Wind simulation in a complex terrain by numerical weather prediction method using large eddy simulation [Volume 53, Issue 7, 2021, Pages 4221-4240]
  • Wind tunnel Passive Control of Vibrations of High-Rise Structure Using Tuned Liquid Damper under Wind and Earthquake Excitations [Volume 53, Issue 11, 2021, Pages 5367-5388]
  • Wind turbine Investigation of the effect of free-wind velocity on the performance of small-scale vertical axis wind turbine [Volume 53, Issue 3 (Special Issue), 2021, Pages 1709-1728]
  • Wind turbine Assessing short-term storage effects on hydrostatic wind turbine in presence of turbulent wind [Volume 53, Issue 6, 2021, Pages 3431-3444]
  • Wind turbine A numerical investigation on the effect of blade tip shapes on power generation of a horizontal axis wind turbine [Volume 53, Issue 5, 2021, Pages 2791-2806]
  • Wind turbine Active Fault Tolerant Control of Wind Turbine Systems using Disturbance Observer-based Sliding Mode and Time Delay Estimation [Volume 53, Issue 8, 2021, Pages 4517-4534]
  • Wind turbine Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2021, Pages 5851-5866]
  • Wind turbine blade Employing of shunt damping method to reduce edgewise vibration of small size wind turbine blade with considering the effect of vibration coupling [Volume 53, Issue 4, 2021, Pages 2073-2088]
  • Wing aerodynamics Experimental investigation of the effect of flapping on the lift and thrust forces of 3D-wing [Volume 53, Issue 3 (Special Issue), 2021, Pages 1697-1708]
  • Winkler foundation Free vibration and flexural-torsional stability analyses of axially functionally graded tapered thin-walled beam resting on elastic foundation [Volume 53, Issue 6, 2021, Pages 3587-3614]
  • Wood Steam generation via solar energy and localizing the light on the pinewood surface [Volume 53, Issue 3 (Special Issue), 2021, Pages 2001-2012]
  • WRF Model Diagnostical and observational analysis of clear air turbulence over the middle east and Iran [Volume 53, Issue 7, 2021, Pages 4203-4220]

X

  • X-ray Diffraction Experimental study of machining residual stresses in plasma-assisted turning process [Volume 53, Issue 4, 2021, Pages 2385-2406]

Y

  • Yaw stability Combination of active braking and semi-active suspension systems to improve the roll and yaw vehicle stability [Volume 53, Issue 6, 2021, Pages 3549-3570]
  • Yield function Micromechanical Damage Model for Plasticity of ‎Metals to Predict Failure under Shear Loads [Volume 53, Issue 12, 2021, Pages 5679-5702]
  • Yield Stress Analytical modeling of elastic limit angular velocity in a rotating disk of a functionally graded material under mechanical-thermal loading conditions [Volume 53, Issue 4 (Special Issue), 2021, Pages 2589-2612]
  • Young-Lipmmann Numerical Study of the Dynamics of Non-Newtonian Carreau Droplets under Electrowetting Phenomenon [Volume 53, Issue 1 (Special Issue), 2021, Pages 319-338]
  • Young's modulus Experimental Extraction of Young's Modulus of MCF-7 Breast Cancer Cell Using Spherical Contact Models [Volume 53, Issue 12, 2021, Pages 5769-5784]

Z

  • Zeotropic mixture Design and evaluation of a novel bi-evaporator combined power and refrigeration cycle working with various zeotropic mixtures [Volume 53, Issue 5, 2021, Pages 3003-3022]
  • Zero moment point Active fault tolerant control based on adaptive back-stepping nonsingular fast integral terminal sliding mode approach [Volume 53, Issue 6 (Special Issue), 2021, Pages 3763-3782]
  • Zero moment point stability theory Robust and Adaptive Control of an Exoskeleton Robot For Tracking Modified Desired Trajectory Based on Zero Moment Point Stability Theory [Volume 53, Issue 12, 2021, Pages 5831-5850]